Asee peer logo
Displaying all 23 results
Collection
2008 GSW
Authors
Jerry K. Keska; Chengyi Ma
optical systems as well as their applicability for the detection offlow patterns. Experimental SystemA measurement system was developed and built for the measuring of flow patterns using opticalsystems (both hydraulic and electronic). The hydraulic system—shown in Figure 1—consists of avertical test tube, two optical measurement systems (reflective and passing), air pressure and flowmeters, and an air compressor. The electronic system consists of a computer-aided data acquisitionsystem (CADAS) and a prototyping board with a Wheatstone bridge, which is interfaced to NIELVIS using a digital oscilloscope. Experimental research was conducted using two differentoptical measurement systems (translucent and
Collection
2008 GSW
Authors
Maurice Thompson
tuition assistance, this program had various components that assured every scholar hadthe adequate academic support and professional development opportunities to succeed in their fieldof study. Data that reflects the impact of this program on student success in STEM fields at UNMwill be revisited through this presentation. Although the program ended nationwide in September2007, NTP at UNM left a great legacy among students, faculty and staff at UNM. Many studentshave gone on to professions with private industry, state and federal agencies. Proceedings of the 2008 ASEE Gulf-Southwest Annual Conference The University of New Mexico – Albuquerque Copyright © 2008, American Society
Collection
2008 GSW
Authors
Nripendra Sarker; Cajetan M Akujuobi
rest are designed inthe light of program educational objectives and Criterion 3 outcomes. These methods were foundto be highly appreciated by ABET in one earlier accreditation process. IntroductionTraditionally, an instructor assesses student performances by giving home works, tests, andprojects, etc. This assessment method is subjective of the instructor. It is well known that duringcourse registration process, many students choose instructors for easy grades. Therefore, gradesdo not always reflect the true merits of students and the programs as well. The real merits of thestudents and programs can better be assessed by determining how really they perform in theirprofessional careers several years
Collection
2008 GSW
Authors
Arup Maji; Mahmoud Reda Taha
engineering). As the class progressed through the semester actionswere taken to minimize the influence of these factors on student success. However, inspite of the corrective actions the final grades of the two groups showed distinctdivergence. This prompted the authors to explore Kolb’s Learning Style Theory toinvestigate possible psychological variances among the two groups. The results of thisstudy shows that the Engineering students tend to have a penchant for ‘AbstractConceptualization’ over ‘Concreteness’, while Management students had a preference for‘Active Experimentation’ over ‘Reflection’. Relevant data supporting this finding alongwith a statistical interpretation are provided here. Introduction The
Collection
2008 GSW
Authors
Gregory P. Starr
to be smaller that a native code representation. • Multi-taking: because the p-code is fully stack-based, a process's state is defined solely by its stack and its program counter. It is thus easy to task-switch simply by loading a new stack pointer and program counter.IC includes a full library of math functions, RC-style servo and DC motor control, analog anddigital sensor support, and runs on Windows, Mac OS X, and Unix computers.Actuators and SensorsThe actuators typically used in the LEGO robots are LEGO 9V DC gearmotors and RC-stylegeared servos (which support position control). Infrared reflectance sensors (Fairchild QRB1114) are used for detecting the black tape of the maze, which various other sensors
Collection
2008 GSW
Authors
Steve Menhart
output f, which is connected tothe least significant bit of port B. Note, the “|=” in the assignment results in output f beingturned on, while all other bits of port B are unchanged. If the “if” statement is not true, output cis off, or logic 0. The while(1) condition sets up a perpetual loop, causing the logical “if-else”statement to be executed indefinitely.Both figures 1 and 2 will implement f = a • b + c, however there are significant differences in theway they accomplish that. Figure 1, whether implemented using a CPLD or FPGA will result ina programmed logic circuit. The output f will reflect changes in the inputs a, b, and cinstantaneously, except for a small propagation delay of a few ns. The C code of figure 2 will beconverted to
Collection
2008 GSW
Authors
Kristi J. Shryock; Helen L. Reed
hopefully learn more about utilizingassessment methods effectively in their individual program. BackgroundFounded in 1932 under the name Engineers' Council for Professional Development, ABET(formerly Accreditation Board for Engineering and Technology) accredits post-secondarydegree-granting programs. Many people interpret this to mean that ABET accredits departments,colleges, or even courses. In reality, ABET accredits programs, and your accreditation workshould reflect the program as a whole.Some programs treat the six-year time lag between visits with the following timeline: - Year 1 – Celebrate success of previous ABET visit. - Years 2-4 – Feel that ABET is a long time away
Collection
2008 GSW
Authors
Chad E. Kennedy
but should represent a good cross-section of likely personality types that the studentswill most likely encounter in professional life. In large classes, multiple groups can be runningconcurrently, while any remaining students can be observers of the scenarios. It is important toengage all students; therefore, any student that is not actively playing a character in the 1st Scenarioshould be a character in the 2nd Scenario. Two scenarios were sufficient to allow the student’s timeto role play the scenarios, come up with a plan to solve the scenarios and allow for classroomdiscussion, feedback and reflection on each scenario. The most interesting comments came duringthe reflection time after the role playing was completed and should not be
Collection
2008 GSW
Authors
Carol Costello; August Allo
determine perceptions of the students concerning the need for and utility ofvarious topics covered in the recitation. The authors administered an entry survey toobtain self-evaluation information and perception of needs at the beginning of thesemester (the end of August). An exit survey was administered in order to compare theopinions of the students before and after the 12 week period (ending in late November)and to request specific information as to what had been useful; attachments 1 and 2contain the two surveys. Ratings on a scale of five and written comments concerning therecitation portion of the class are reflected throughout this paper.During the preceding two semesters, in order to determine an optimally effective agendafor the writing
Collection
2008 GSW
Authors
Maheshwar R Kashamolla; Zayd Leseman; Amit Savkar; Kevin Murphy
the 2008 ASEE Gulf-Southwest Annual Conference The University of New Mexico – Albuquerque Copyright © 2008, American Society for Engineering Educationlaser passes through an 8x beam expander before passing through a beam-splitter, but the LDV laseris placed in front of the beam expander so it proceeds directly to the beamsplitter. Only one lightsource at a time is used. The beam-splitter is a 50/50 reflection/transmission pellicle beam-splitterwith a thickness of 2 μm. Half of the light is directed towards the MEMS die. Between the die andthe beam-splitter is a transparent window, which allows observation of the die while at the sametime allowing the die to be at vacuum pressures
Collection
2008 GSW
Authors
Michael Sheyka; M.M. Reda Taha; T. Khraishi; I. El-Kady; Mehmet F. Su
IntroductionPhotonic crystals (PC) are synthetic materials that can be used to control lightpropagation. PC have a frequency bandgap where light is forbidden to propagate. Thisbandgap is strongly tied to the microstructure of the photonic crystal. Three dimensionalTungsten photonic crystal in a Lincoln-log microstructure has been suggested as analternative filter in photo voltaic cells with significantly high power efficiency.Mechanical characterization of Tungsten PC can be performed using means of micro-indentation. Figure 1 represents the general structure of a bangap for a photonic crystal. Figure 1. Photonic bandgap of PC (bandgap is the region with100% reflectance) Figure 2. Isometric SEM image of Tungsten PC
Collection
2008 GSW
Authors
Eddie Miller; Chun L. Huang
. IntroductionSince the seventeenth century, science and engineering have developed in both theory and actualexperimentation. The two have continued concurrently to allow scholars, scientists, and engineersto understand the natural phenomena of fluid flow and other phenomena in nature. Furthermore, theundergraduate engineering and science curricula also reflect this tradition. However, with theadvancement of high-speed digital computing and the development of accurate numerical algorithmsfor solving physical problems with this new computing technology, we have been introduced withinthe last half century to a new approach in the way we study and practice science. Computationalfluid mechanics along with a solid background in theoretical and experimental
Collection
2008 GSW
Authors
Luciana Barroso; Jim Morgan
problems and systems, both in how to break down a problem and identify appropriate simplifying assumptions, as well as how to evaluate their problem solution and system behaviorThese issues are by no means unique to dynamics courses6. However, the nature of the material issuch that these problems become more obvious in this class, and students cannot successfullycomplete the course without addressing these issues. The fundamental nature of these pedagogicalissues is reflected by their close connection to key findings articulated in How People Learn7. Theresearch synthesized indicates that if the learner’s preconceptions (including misconceptions) abouta particular topic are not brought to the surface, then new concepts will
Collection
2008 GSW
Authors
James B. Farison; Zhuocheng Yang
formultidisciplinary engineering programs is given at the ASEE website.11 Accreditation of the Multidisciplinary Engineering ProgramsThe roster of accredited multidisciplinary engineering programs and the number of ASEEprogram evaluators needed changes each accreditation cycle, as illustrated in two earlierpapers.12,13 Based on the current listing from the ABET website4 as compiled in Table 2, Table3 gives the number of institutions and the numbers of multidisciplinary engineering programaccreditation visits implied for the six-year accreditation cycle from 2007-08 through 2012-13.Clearly, there is a wide variation reflected by those data in the workload from year to year,ranging from five programs at five institutions in 2008-09 to 20 programs at 20
Collection
2008 GSW
Authors
Pradeep K. Bhattacharya; Jiecai Luo
involved in growingglobal agreements between US and other countries. It is a big question, as to how do one feelthat ethical questions have to be answered in the right perspective, to accomplish amicableresults for the society. This traditionally comes from the training one gets and reflects innegotiation techniques one follows. Formerly, companies used specialists and seniormanagement for such efforts, but in the baby boomer age it is now on the shoulders of juniorengineers. Training in ethics, in recent years has achieved widespread and enthusiasticacceptance throughout the engineering community, yet a lot needs to be done to teach ethical Proceedings of the 2008 ASEE Gulf-Southwest Annual Conference
Collection
2008 GSW
Authors
James B. Farison; Zhuocheng Yang
37 individualprogram ratings for 2008 from Table 1 are also shown graphically in Figure 1. This graphreflects the published ratings range from 4.5 to 3.0, noted previously. It also reflects the ratingties, appearing as horizontal segments due to their equal ratings. The “flattening” of the curve isa critical property of the data, and is explored further in the subsequent analysis.Figure 1 and the subsequent Ratings graph groupings of programs in Figures 2-9 have a verticalscale that results in higher ratings appearing higher on the vertical scale. Specifically, Figures 2-9 provide that rating data graphically for the six years (2003, 2004, 2005, 2006, 2007 and 2008)for equally rated sets of these 37 programs, grouped according to the 2008
Collection
2008 GSW
Authors
G.R. Kanapuram; Enno “Ed” Koehn
roof are literally the buildingblocks that make the building. These components can either degrade the energyefficiency of the building or enhance its performance and increase occupant comfort.Many new energy-saving components are coming to market. These products do doubleduty, performing their primary jobs while also saving energy. Roof shingles, for example,may be coated with heat-reflective materials that send the sun's heat away from thebuilding, rather than being absorbed and can even generate electricity for the building.Compact fluorescent lights use less energy and put less heat into the building, andadvances in HVAC technology mean more comfortable spaces that use less energy.The benefits from these components will not be realized
Collection
2008 GSW
Authors
Raja. S.R. Gardimalla; Enno “Ed” Koehn
internal temperature: minimize heat lossthrough appropriate insulation and unwanted heat gains with solar shading, insulation,and reflective finishes. Consider using thermal mass to moderate daily temperaturevariations and as a seasonal heat source to make use of summer heat in the winter andprovide natural ventilation and cooling, if possible.Design the building envelope to minimize electrical lighting needs: provide ample naturallight and encourage a resource-saving lifestyle.Use energy efficiently: provide heating and cooling through energy-efficientmechanical appliances. Use energy-efficient lights and appliances and provide communalheating and electricity where possible. Set energy design targets and monitor buildingperformance in addition to
Collection
2008 GSW
Authors
Hassan Monghbeli; Khaled Ellithy; F. Koktot; Mahmundul Alam
power factorcorrection for an 11 kV industrial distribution network in the State of Qatar. The networkmodel has been developed using EDSA professional power system software. The energy afteradding the shunt capacitors (i.e. after power factor correction) has been determined from thepower flow solutions. The on-site measurements have been conducted and the measurementshave been verified by the network model that was developed by EDSA software. IntroductionIndustrial power distribution networks experience increase in power losses during summerperiod 1, 4. This is mainly related to the excessive use of air conditioning system and motordrives which reflects an increase in the electric load. Such increase in
Collection
2008 GSW
Authors
Ian A. Gravagne; Kenneth Van Treuren
asthey work it: • Understand how to locate and read typical meteorological year 2 (TMY2) data. • Correct for the difference between TMY2 timestamps and local solar time. • Choose a diffuse radiation model and assume a reasonable value for ground reflectance. • Correct the SRCC collector efficiency data for angle of incidence, flow rate and fluid heat capacity. • Assume some mathematical behavior for the incidence angle modifier beyond its specified limit of 60 degrees. • Remember to integrate total gain throughout the night, not just when the sun is up! Proceedings of the 2008 ASEE Gulf-Southwest Annual Conference The University of New Mexico – Albuquerque
Collection
2008 GSW
Authors
Cheryl L. Willis
representatives, employers, or surveys of alumni, as is theusual case for continuous program improvement assessment, cannot provide the depth of detail that potentially couldcome from an analysis of the labor markets’ supply and demand indicators. By using the data resources of theFederal-State Cooperative Labor Market Statistical System, known collectively for this paper as the labor marketinformation system (LMIS), to inform their continuous program improvement efforts, STEM programs couldinclude a relevant layer of information sources to aid in the identification, design, and alignment of programoutcomes and objectives with economic demands and needs of the state and region.This paper reflects one STEM program’s use of the LMIS to inform its program
Collection
2008 GSW
Authors
Farrokh Attarzadeh; Miguel A. Ramos; Enrique Barbieri
scores for each student during the semester. (independent variable) • WPRSUM – The sum total of weekly progress report scores for each student during the semester. These totals reflect group work. (independent variable) • Proposal – Proposal presentation score. (independent variable) • Midterm – Midterm exam score. (independent variable) • Final Exam – Final exam score. (dependent variable) • Project – Final project total score. (dependent variable)Analysis for Fall 2006It was hypothesized that of the four independent variables, the weekly progress reports(WPRSUM) and proposal scores had the highest likelihood of having a relationship withthe final project since these items most closely
Collection
2008 GSW
Authors
Kenneth W. Van Treuren; Ian A. Gravagne
technical and social content.This need for energy education is the main motivation for the energy awareness efforts at BaylorUniversity. According to the National Energy Policy2, the U. S. must have between 1,300 and1,900 new electricity generation plants in place to meet the projected 45% increase in electricaldemand by the year 2020. There is little chance that this need in new electricity generation plantswill be satisfied. Economic and political policies often reflect the unspoken assumption that theUnited States will be able to continually increase its reliance on natural resources and moreimportantly, energy resources. Goals for “energy independence” have continually slipped sincethe term first appeared in 1980. For instance, with plentiful