Conference Session

Design Tools and Skill Development

Collection

2017 ASEE Annual Conference & Exposition

Authors

Maria R. Young, University of Michigan; Shanna R. Daly, University of Michigan; Sara L. Hoffman, University of Michigan; Kathleen H. Sienko, University of Michigan; Madeline A. Gilleran, University of Michigan

Tagged Divisions

Design in Engineering Education

educational resources that provide detailed information about best practices or facultymentors with in-depth expertise on these topics [4]. Further, because students frequently engage in designactivities outside of the classroom and at different points in their academic careers, novice design practitionerswould benefit from on-demand access to training materials and hands-on learning opportunities coupled withreal-time feedback regarding performance to practice these challenging skills.We have designed, implemented, and researched a learning block model that combines an online learningplatform with face-to-face practice and real-time evaluation. Each learning block consists of five distinctcomponents. First, students complete a ‘Prior Knowledge

Conference Session

Student Feedback and Assessment in Design

Collection

2017 ASEE Annual Conference & Exposition

Authors

Jackson Lyall Autrey, University of Oklahoma; Zahed Siddique, University of Oklahoma; Farrokh Mistree, University of Oklahoma

Tagged Divisions

Design in Engineering Education

into other ventures (POED 5c) (carry-forward) Figure 4: Table outlining the changing questions asked in the ‘Current Status’ section of the MII surveys. In each question, linked to a particular POED, we assess student confidence in the utility of that POED in the short-term. In the second section of the survey, we ask students to rate agreement as it applies tothem individually, of ten statements tied to particular knowledge of design using the same five-point Likert scale as the first section. As in the first section of the survey, a preamble promptsthe students completing this section to consider how their knowledge may be applied in the long-term (capstone, their careers, etcetera). Unlike in the first section, however

Conference Session

Teamwork and Student Learning in Design

Collection

2018 ASEE Annual Conference & Exposition

Authors

Elisabeth Kames, Florida Institute of Technology ; Devanshi Shah, Florida Institute of Technology; Beshoy Morkos, Florida Institute of Technology

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

loss of self-efficacy.13 Once a student loses confidence in their ability to perform a task, theytend to feel uncomfortable or out of place. Similarly, Tinto identified that the most important factorin a student’s academic performance is a measure that he termed “student commitment”. This is ameasure of the student’s ability to integrate themselves into the academic community.14,15 Whilethere have since been many studies examining other contributing factors, the underlying tone inall of the research is the student’s comfort, confidence, and motivation in their area of study.14–17 2.2. Student GenderThere exists an implicit bias that science, technology, engineering and mathematics (STEM) aremasculine career fields. Though women make up

Conference Session

Making, Hacking, and Extracurricular Design

Collection

2018 ASEE Annual Conference & Exposition

Authors

Paul Alexander Horton, Arizona State University; Shawn S. Jordan, Arizona State University, Polytechnic campus; Steven Weiner, Arizona State University, Polytechnic campus; Micah Lande, Arizona State University

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

campus SHAWN JORDAN, Ph.D. is an Associate Professor of engineering in the Ira A. Fulton Schools of En- gineering at Arizona State University. He teaches context-centered electrical engineering and embedded systems design courses, and studies the use of context in both K-12 and undergraduate engineering design education. He received his Ph.D. in Engineering Education (2010) and M.S./B.S. in Electrical and Com- puter Engineering from Purdue University. Dr. Jordan is PI on several NSF-funded projects related to design, including an NSF Early CAREER Award entitled ”CAREER: Engineering Design Across Navajo Culture, Community, and Society” and ”Might Young Makers be the Engineers of the Future?,” and is a Co-PI on the

Conference Session

Capstone Design Courses I

Collection

2016 ASEE Annual Conference & Exposition

Authors

Lisa M. Del Torto, Northwestern University; Bruce Ankenman, Northwestern University; Stacy Benjamin, Northwestern University; Trevor Harty, Northwestern University; Penny L. Hirsch, Northwestern University

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

, Northwestern University Trevor is an undergraduate psychology major with a minor in business institutions and a certificate in marketing. Over the course of his Northwestern career he has conducted research for and served as a coauthor on numerous psychology and other social science studies.Dr. Penny L. Hirsch, Northwestern University Penny L. Hirsch, Professor of Instruction and Associate Director of the Cook Family Writing Program at Northwestern University, teaches classes in the Weinberg College of Arts and Sciences and the Mc- Cormick School of Engineering and Applied Science. She was Northwestern’s first Charles Deering McCormick University Distinguished Lecturer and played a key role in developing Design Thinking and

Conference Session

Capstone Design Courses II

Collection

2016 ASEE Annual Conference & Exposition

Authors

Nikhil Gupta, Florida State University; Matthew J Jensen, Florida Institute of Technology; Chiang Shih, Florida A&M University/Florida State University

Tagged Divisions

Design in Engineering Education

emphasizes onacquiring soft skills besides the engineering concepts such as professional code of conduct,report writing, and team management. These skills are critical in todays emerging globaleconomies for a successful engineering career. With this in mind, the purpose of the course is toequip the students with technical and non-technical professional skills that could be implementedon engineering design problems, while working in a global team with different dynamics. For thestudents, to be successful in the course, they have to develop and sharpen skills in organization,time management, self-discipline, and technical writing, while working as a strong teammember.At the end of the school year, the capstone design course concludes with a one-day

Conference Session

Capstone Design Projects

Collection

2010 Annual Conference & Exposition

Authors

Jennifer Dawson, York College of Pennsylvania; Stephen Kuchnicki, York College of Pennsylvania

Tagged Divisions

Design in Engineering Education

to test the abilities students have gainedover their college careers and to provide a design experience that simulates real-worldengineering. An important factor in giving students a valuable Capstone Design experience isthe selection of an appropriate project. A good project for this purpose should have appropriatetechnical rigor and allow students to focus as much as possible on engineering design rather thanon logistical activities like fundraising. Further, the work done by students in the course shouldbe assessable, both for the purposes of accreditation and for assignment of grades. Additionally,the deadlines imposed must be appropriate, and evaluation criteria need to be established.One solution for many of the project planning

Conference Session

Design Potpourri

Collection

2012 ASEE Annual Conference & Exposition

Authors

Nicholas Charles Cappello, York College of Pennsylvania; Takeshi Jonathan Ei, York College of Pennsylvania; Edward Miller Jr., York College of Pennsylvania; Dan Bosse, Weldon Solutions; Berne S. Edwards, Graham Packaging Company; Kala Meah, York College of Pennsylvania; Stephen N. Kuchnicki, York College of Pennsylvania; Gregory M. Link, York College of Pennsylvania; Wayne Blanding, York College of Pennsylvania; Scott F. Kiefer, York College of Pennsylvania

Tagged Divisions

Design in Engineering Education

years of Naval service, Takeshi Jonathan Ei commenced undergraduate studies at Northamp- ton Community College in Bethlehem, Penn. He then transferred to York College of Pennsylvania and graduated with a bachelor’s of science in mechanical engineering in June 2011. Ei has interests in marine systems and power generation technologies and plans to pursue a postgraduate degree and a career in the field of commercial or military shipbuilding.Mr. Edward Miller Jr., York College of Pennsylvania Edward Miller received his B.Sc. degree in electrical engineering in Aug. 2011 from York College of Pennsylvania. Miller is interested in power systems and renewable energy technologies. He plans to pursue a postgraduate degree, as

Conference Session

Design Spine

Collection

2012 ASEE Annual Conference & Exposition

Authors

Olga Pierrakos, James Madison University; Eric C. Pappas, James Madison University; Robert L. Nagel, James Madison University; Jacquelyn Kay Nagel, James Madison University

Tagged Divisions

Design in Engineering Education

). letters, audience analysis; proposal7) Evaluate sustainability (environmental, social, economic, writing) technical) of given designed products. Professional Prep – Resume Skills,8) Identify and describe a variety of professional tracks in Internships, REUs, grad school, etc. engineering and develop a preliminary career plan. Technical Presentation Modules9) Apply a variety of strategies in facilitating a creative team (from slide design to delivery) environment and a healthy team dynamics. Individual and collaborative design10) Examine human interface analysis of given products. process

Conference Session

Impact of COVID-19 on Design Education 1

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Victoria Bill, New York University, Tandon School of Engineering; Anne-Laure Fayard, New York University, Tandon School of Engineering

Tagged Divisions

Design in Engineering Education

learn how to make their projects more visible. While moststudents utilize social media already, few have developed project portfolios, andacademic makerspaces can naturally demonstrate the value for career preparation androle model the development of better project documentation.Moving forward, the authors hope to conduct follow up interviews for all four spaces asthe university and makerspace functions continue to develop. To begin to assess the long-term impact on engineering student design skills, longitudinal studies from the first-yearthrough capstone should be used. Many first-year engineering programs now utilizemakerspaces, either embedded in the design course itself or by encouraging training anduse of the larger school makerspace

Conference Session

Design Methodologies 1

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Sangarappillai Sivaloganathan, United Arab Emirates University; Ali H. Al-Marzouqi, United Arab Emirates University; Essam K. Zaneldin P.E., United Arab Emirates University

Tagged Divisions

Design in Engineering Education

Paper ID #29718Teaching Conceptual Design to a Heterogeneous Group: A Workshop MethodDr. Sangarappillai Sivaloganathan, United Arab Emirates University Dr Sangarappillai Sivaloganathan – Siva is a Srilankan by birth and a citizen of the United Kingdom. His experience in Sri-lanka started with an year’s post-graduate apprenticeship in the manufacturing shops of the Government Railway and nine years in the Cement Industry. He graduated as a Mechanical Engineer from University of Srilanka, and obtained his Masters from the University of Aston and PhD from City University of London, both in the UK. He started his career in the

Conference Session

Best of DEED

Collection

2015 ASEE Annual Conference & Exposition

Authors

Ibrahim Mohedas, University of Michigan; Grace Louise Cravens, Sienko Research Group; Shanna R. Daly, University of Michigan; Kathleen H. Sienko, University of Michigan

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

University of Kentucky. She directs both the Sensory Augmentation and Rehabilitation Laboratory (SARL) and the Laboratory for Innovation in Global Health Technology (LIGHT). SARL focuses on the design, develop- ment, and evaluation of medical devices, especially for balance-impaired populations such as individuals with vestibular loss or advanced age. LIGHT focuses on the co-creative design of frugal innovations to address healthcare challenges in resource-limited settings. Prof. Sienko has led efforts at the University of Michigan to incorporate the constraints of global health technologies within engineering design at the undergraduate and graduate levels. She is the recipient of a CAREER Award from the National Sci

Conference Session

Assessing Design Coursework

Collection

2008 Annual Conference & Exposition

Authors

Richard Bannerot, University of Houston

Tagged Divisions

Design in Engineering Education

recognize the importance of teaming and writing skills fortheir careers. Table 15: Summary of Grades for Individual Assignments Ind. Assign Type %1 Avg. 2 SD3 Miss4 HW#1 survey 1.0 4.0 0 0 HW#2 resume 1.0 4.0 0 0 HW#3 demo 0.5 3.82 0.83 3 HW#4 IP & C&S 2.0 3.51 1.24 6 HW#5 specs 3.5 2.43 1.15 7 HW#6 ethics 1.5 2.93 1.35 11 HW#7 economics 2.0 1.82 1.24

Conference Session

Early Engineering Design Experiences

Collection

2009 Annual Conference & Exposition

Authors

Shawn S Jordan, Purdue University; Nielsen Pereira, Purdue University

Tagged Divisions

Design in Engineering Education

EngineersAbstract Hands-on learning experiences and interactive learning environments can be effective inteaching K-12 students. Design, in essence, is an interactive, hands-on experience. Engineeringdesign can be taught in the classroom using innovative hands-on projects, such as designing andbuilding serve to teach design, promote creativity, and provide opportunities for hands-onproblem solving, in addition to giving students experience working in cooperative teams. In turn,these experiences could encourage students to consider future careers in engineering and science. This paper explores findings from data collected during the authors’ recent experienceteaching a group of fifteen 4th – 6th grade students enrolled in a 6-week Saturday

Conference Session

DEED Postcard Session 1

Collection

2017 ASEE Annual Conference & Exposition

Authors

Whitney Gaskins, University of Cincinnati; Nandita Baxi Sheth, University of Cincinnati, College of Design, Architecture, Art, and Planning; Kate Rice, University of Cincinnati

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

creative critical ideas to develop. Wemaintained rigorous expectations for students while demanding the out of the box thinking thatinnovations require. Developing comfort with discomfort, working collaboratively with peoplefrom other disciplines, and attaining agency through their individual talents and skills were allarenas where we saw significant student growth, particularly articulated in the Final Projectpresentations. Students also expressed gratification at the opportunity to work acrossdisciplines, learn from each other, and even share strengths with each other. For many it wasthe only class that held space for that experience in their University career. While timeconsuming to plan, the rewards for students and faculty are worthwhile

Conference Session

Design Assessment

Collection

2018 ASEE Annual Conference & Exposition

Authors

Jennifer S. Mullin, University of California, Davis; Jean S. VanderGheynst, University of California, Davis

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

Conference Session

Design in Engineering Education Division Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Gene Dixon, East Carolina University

Tagged Divisions

Design in Engineering Education

Discuss the networking needs of the project as an opportunity for increasing subject matter expert participation and career building. o Discuss the impacts of scope creep/change on success. o Discuss the importance of a robust, dynamic project schedule for communicating project progress, needs and resource requirements. o Discuss the risks and opportunities of rotating leadership, single voice of communications with the sponsor and meeting planning. o Encourage ideation and prototyping as a means of getting to a preferred solution. o Discuss the role of Capstone in the accreditation process. • Establish a regular schedule for team-FA meetings for

Conference Session

Design in Engineering Education Division Poster Session

Collection

2016 ASEE Annual Conference & Exposition

Authors

Mary S Carpenter Ed.D., CCD - Custom Curriculum Design; Chris Yakymyshyn; Logan Edward Micher; Ashly Locke, Florida Polytechnic University

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

, several undeclaredlearning outcomes resulted from the course structure and project choice-1) Acquiring an appreciation for not being too ambitious under a given set of constraints. Thislife lesson is important for practicing engineers, who inevitably work under time and costconstraints for their entire careers. At least one of an inability to print 3D designs, poor quality of3D printed components, student-selected components arriving late or out-of-stock, low lightoutput of prototype, failure of supplied components (the failure rate of the levitators was over20%), LED overheating (one prototype lamp LED fell off when the solder melted due toovercurrent) or extensive redesigns were experienced by many of the students. This was reflectedin some of

Conference Session

Student Evaluation in Design Education

Collection

2016 ASEE Annual Conference & Exposition

Authors

Olga Pierrakos, James Madison University; Robin Dawn Anderson, James Madison University; Cheryl Alyssa Welch

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

increase in production of overseas engineers. Adaptiveexpertise is a skill set that would support students’ preparation for the complex problem solvingenvironments of the real-world. The display of adaptive expertise has been said to "ultimatelylead to students' depth of knowledge and habits of mind that lead to success in their career andenable them to be innovators in the field" [2]. For this reason, it is important for educators andscholars to explore how we can better prepare our students to showcase adaptive expertise. It isequally important to assess the effectiveness of our attempts at facilitating this development.Think-a-louds, [3] interviews [1], and self-report surveys [4] [1] [5][6] [7] have all been used tomeasure adaptive expertise

Conference Session

Professional Skills development in Design

Collection

2016 ASEE Annual Conference & Exposition

Authors

Michael Deininger, University of Michigan; Kathleen H. Sienko, University of Michigan; Shanna R. Daly, University of Michigan; Jennifer Chen Lee, University of Michigan

Tagged Divisions

Design in Engineering Education

the University of Michigan to incorporate the constraints of global health technologies within engineering design at the undergraduate and graduate levels. She is the recipient of a CAREER Award from the National Science Foundation, a Teaching Innovation Prize from the UM Provost, and a UM Undergraduate Teaching Award. While at MIT, she was a winner of the MIT $50K Entrepreneurship Competition.Dr. Shanna R. Daly, University of Michigan Shanna Daly is an Assistant Professor of Mechanical Engineering at the University of Michigan. She has a B.E. in Chemical Engineering from the University of Dayton (2003) and a Ph.D. in Engineering Edu- cation from Purdue University (2008). Her research focuses on strategies for

Conference Session

Maker Spaces in Design Education

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Amit Shashikant Jariwala, Georgia Institute of Technology; Jenny Wang, Georgia Institute of Technology; J. Auston Ferrarer, Georgia Institute of Technology; Gabrielle E. Lonsberry, Georgia Institute of Technology; Kentez Lanier Craig, Georgia Institute of Technology

Tagged Divisions

Design in Engineering Education

work helpsexcite and motivate them for what lies ahead. It has been shown that instilling passion andenthusiasm in students early in their careers positively affects their educational experience. [5]Additionally, design courses can incorporate a variety of subjects, thus helping students learn howto integrate information, make connections across disciplines, and develop holistic solutions tocomplex problems. Teaching rapid prototyping in conjunction with design can significantly enhance students’experience with the design process. An exhaustive literature review on teaching design for additivemanufacturing within makerspaces is presented in Jariwala et al. [6] Rapid prototyping is a usefultool for design visualization and verification

Conference Session

Design in Freshman and Sophomore Courses

Collection

2012 ASEE Annual Conference & Exposition

Authors

Michael J. Reese Jr., Johns Hopkins University; Peter H. Froehlich, Johns Hopkins University; Joan Freedman, Johns Hopkins University

Tagged Divisions

Design in Engineering Education

TeamsTo facilitate the interdisciplinary goals of the course, students were assigned to teams based ontheir skill sets and interest in gaming genres. Each of the 10 four-person teams included two“techies” – computer science or engineering majors to lead the programming – and two“creatives” – a writer, musician, or fine arts major. Johns Hopkins offers fine arts coursesthrough its art workshops program but does not have a comprehensive visual arts curriculum;however, it is located near one of the top fine arts colleges in the country: the Maryland CollegeInstitute of Art (MICA). Students were recruited from MICA and the Johns Hopkins PeabodyConservatory, which trains students pursuing professional careers in music. The PeabodyConservatory is

Conference Session

Capstone Design I

Collection

2012 ASEE Annual Conference & Exposition

Authors

Robb E. Larson, Montana State University; David A. Miller, Montana State University

Tagged Divisions

Design in Engineering Education

providescontinuity and superior competition results. But are these advantages reaped at the expense of theindividual student experience, or can certain advantages to the student be identified? Can thisexperience help a student navigate similar occurrences in their subsequent career? Shouldcapstone students always design first and prototype later, or can anything be gained if these stepsare reversed? This paper describes the methodology developed to permit students to join in-progress Capstone groups, and the practical considerations involved. Positive and negativeaspects of this scenario - including survey results from student participants and alumni - areexamined. Finally, methodologies and recommendations for information exchange and focusarea knowledge

Conference Session

Capstone Design II

Collection

2012 ASEE Annual Conference & Exposition

Authors

Stephen W. Laguette, University of California, Santa Barbara

Tagged Divisions

Design in Engineering Education

AC 2012-3439: ASSESSMENT OF PROJECT COMPLETION FOR CAP-STONE DESIGN PROJECTSMr. Stephen W. Laguette, University of California, Santa Barbara Stephen Laguette is currently a lecturer at the University of California, Santa Barbara, in the College of Engineering in the Department of Mechanical Engineering (ME) and the Technology Management pro- gram, and is responsible for the undergraduate M.E. capstone design program. He received his B.S., M.S. in M.E. from the University of California, Los Angeles. His professional career has included executive research and development management positions with a number of medical device companies. He has been responsible for the creation of complex medical devices with more than 15

Conference Session

The Best of Design in Engineering

Collection

2011 ASEE Annual Conference & Exposition

Authors

Mark W. Steiner, Rensselaer Polytechnic Institute; Junichi Kanai, Rensselaer Polytechnic Institute; Cheng Hsu, Rensselaer Polytechnic Institute; Richard Alben, Rensselaer Polytechnic Institute

Tagged Divisions

Design in Engineering Education

, industrial and mechanical engineering. The analysis focuses on astudy of what students express as relevant learning points. We have found students to besurprisingly frank about what they learned and where they thought their experience in thecourse fell short. Over time we have observed common themes that emerge amongstudents concerning their ability to deal with project changes and team dynamics andhave charted the resulting ebb and flow of enthusiasm and motivation over the course ofa semester.BackgroundCapstone projects represent a major milestone in a student’s academic career andprofessional development where they are expected to integrate knowledge and skills fromprior coursework. Capstone also represents a major checkpoint for assessing

Conference Session

Design Communications & Cognition I

Collection

2011 ASEE Annual Conference & Exposition

Authors

Tiffany Tseng, Stanford University; Maria Yang, Massachusetts Institute of Technology

Tagged Divisions

Design in Engineering Education

Division under an NSF Graduate Fellowship. More recently, she was an Assistant Professor of Industrial and Systems Engineering at the University of Southern California, and before that a postdoctoral instructor of design in the mechanical engineering department of the California Institute of Technology. She has been a lecturer in design at Stanford University. She is the 2006 recipient of an NSF Faculty Early Career Development (CAREER) award. Dr. Yang’s industrial experience includes serving as Director of Design at Reactivity, a Silicon Valley software company now a part of Cisco Systems. She has done research into collaborative design tools at Apple Computer’s Advanced Technology Group and Lockheed Artificial

Conference Session

Design Communications & Cognition I

Collection

2011 ASEE Annual Conference & Exposition

Authors

Leema Kuhn Berland, University of Texas, Austin; William F. McKenna, University of Texas, Austin; Stephanie Baker Peacock, University of Texas, Austin

Tagged Divisions

Design in Engineering Education

high school classrooms.William F McKenna, University of Texas at Austin Bill received his masters of mathematics from the University of North Texas about ten years ago, and after a brief but potentially promising career in acoustical test enclosures, he is working in his fourth year towards a doctorate in Science and Mathematics Education. Helping to make the world a quieter place is a fine and noble thing, but it simply does not compare to educating people. These days Bill focuses on communication in technical fields. His current research involves helping high school students learn the form, function and benefits of effective communication, especially argumentative discourse and interpersonal relations.Stephanie

Conference Session

Assessment

Collection

2014 ASEE Annual Conference & Exposition

Authors

Megan Kenny Feister, Purdue University, West Lafayette; Carla B. Zoltowski, Purdue University, West Lafayette; Patrice Marie Buzzanell, Purdue University, West Lafayette; William C. Oakes, Purdue University, West Lafayette; Qin Zhu, Purdue University

Tagged Divisions

Design in Engineering Education

of three books and author of over 140 articles and chapters, her research centers on the intersections of career, gender, and communication, particularly in STEM. Her research has appeared in such journals as Human Relations, Communication Monographs, Management Communication Quarterly, Communication Theory, Human Communication Research, and Journal of Applied Communication Research, as well as proceedings for ASEE and FIE. A fellow and past president of the International Communication Association, she has received numerous awards for her research, teaching/mentoring, and engagement. She is working on Purdue-ADVANCE initiatives for institutional change, the Transforming Lives Building Global Communities (TLBGC

Conference Session

Best in DEED

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Andrew Olewnik, University at Buffalo, The State University of New York; Vanessa Svihla, University of New Mexico

Tagged Divisions

Design in Engineering Education

- tion / Spencer Postdoctoral Fellow and a 2018 NSF CAREER awardee in engineering education research. Dr. Svihla studies learning in authentic, real world conditions, specifically on design learning, in which she studies engineers designing devices, scientists designing investigations, teachers designing learning experiences and students designing to learn. American c Society for Engineering Education, 2021 Framing Engineering Problems in an Intramural ContextAbstractSupporting students to frame design problems is one of the most challenging aspects ofengineering education, and as faculty, sharing agency with students, such that they have framingagency to

Conference Session

Design Methodologies 2

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

James Righter, The Citadel; David S. Greenburg, The Citadel; Robert J. Rabb P.E., The Citadel; Nathan John Washuta P.E., The Citadel

Tagged Divisions

Design in Engineering Education

an Associate Professor in the Department of Engineering Leadership and Program Man- agement (ELPM) in the School of Engineering (SOE) at The Citadel. Dr. Greenburg is an Associate Professor in the Department of Engineering Leadership and Program Management (ELPM) in the School of Engineering (SOE) at The Citadel. He served over 20 years of active military service in the United States Marine Corps. During his military career he served in a variety of progressively responsible com- mand and staff and leadership positions in Infantry, Logistics, Acquisition, and Human Resources; with peacetime and combat experience. Upon completion of active military service, Dr. Greenburg served in technical program management and