Conference Session

Teaching Outside the Box in Civil Engineering

Collection

2005 Annual Conference

Authors

Nancy Fouad; Tarek Rizk; Fouad Fouad

conception and the plan of design. As such, some formal construction training isneeded to provide our graduates with the necessary tools for successful practice.However, adding coursework on construction to the undergraduate curriculum is not a simpletask. Civil engineering undergraduate programs are constantly encouraged to reduce credit hoursand to increase emphasis on liberal arts and social sciences. At the same time, technology isadvancing at an exponential rate, which is requiring the civil engineer to be knowledgeable ofnew techniques and tools such as GIS, GPS, computational mechanics, modeling, etc. Whilefive-year programs or a master’s degree have been suggested by ASCE and others, it is felt thatsome basic training in construction at the

Collection

2001 Annual Conference

Authors

Robert Floersheim; Stephen Ressler; Margaret Bailey

Session 2793 Course Assessment Plan: A Tool for Integrated Curriculum Management R. Bruce Floersheim, Margaret Bailey and Stephen J. Ressler United States Military Academy at West PointAbstractAs we enter the 21st Century in engineering education, a common desire exists toimprove curriculum structure, integration and assessment. Much has been written anddiscussed in workshops and professional journals concerning the top-down process forassessing and/or revising a program curriculum. Institutions are finally realizing theycannot afford to rely solely upon the senior capstone design experience to be theintegrator of all

Collection

2000 Annual Conference

Authors

John I. Hochstein; Deborah Hochstein

Session 2266 DACUM…A Tool for Documenting Industrial Involvement in Curriculum Design Deborah J. Hochstein and John I. Hochstein The University of MemphisAbstractThe DACUM process is a formal procedure for identifying the competencies, skills, andattributes required of employees in an occupation and organizing that information into a formuseful for the design of educational programs to prepare individuals for entry into, andadvancement within, that occupation. A brief definition of the DACUM process, and thehistorical context within which it has evolved, is

Collection

1998 Annual Conference

Authors

M. R. Foster; H. Öz

Session 2202 The New Aerospace Engineering Curriculum at The Ohio State University H. Öz and M. R. Foster Aerospace Engineering Program Department of Aerospace Engineering, Applied Mechanics and Aviation The Ohio State UniversityI. Introduction and BackgroundOur discipline has changed a great deal since the boom years of aeronautical and astronauticalengineering in the 1950’s and 1960’s; apart from obvious changes due to altered geopolitics,there have also been changes in the way engineers do their jobs in the workplace. Perhaps moreimportant to educators, there

Conference Session

Engineering Design Graphics Division (EDGD) Technical Session 2

Collection

2024 ASEE Annual Conference & Exposition

Authors

Jordan Osborne, Illinois State University; Jeritt Williams, Illinois State University; Yi-hsiang Isaac Chang, Illinois State University

Tagged Divisions

Engineering Design Graphics Division (EDGD)

Paper ID #42358WIP: Designing an Immersive Robotics Curriculum with Virtual RealityJordan Osborne, Illinois State University Jordan Osborne is a Lecturer in the Department of Technology at Illinois State University, where he teaches courses in Engineering Technology and Computer Systems Technology. Before joining the university faculty, Jordan manufactured and designed switchgear power distribution systems. He has also worked in the electronics manufacturing industry to develop circuitry for high-resolution media broadcast. His research interests include interdisciplinary STEM education and applied educational

Conference Session

New Teaching Methods in Construction Eduction

Collection

2011 ASEE Annual Conference & Exposition

Authors

John Walewski, Texas A&M University; Amy Ahim Kim

Tagged Divisions

Construction

AC 2011-617: TOMORROW’S UNIVERSITY GRADUATE: CONSTRUC-TION INDUSTRY NEEDS AND CURRICULUM ENHANCEMENTJohn Walewski, Texas A&M University John A. Walewski, Ph.D., is an assistant professor with the Zachry Department of Civil Engineering at Texas A&M University with research interests in sustainable design and construction techniques, risk management and insurance, pre-project planning, and the use of alternative project delivery and procure- ment methods. John is a Board member of the U.S. Green Building Council’s Central Texas-Balcones Chapter. Dr. Walewski obtained a Civil Engineering Ph.D. (Construction Engineering and Project Man- agement focus) at The University of Texas at Austin (UT) in May 2005, and

Conference Session

Educating Students for Professional Success

Collection

2011 ASEE Annual Conference & Exposition

Authors

Devdas M. Pai, North Carolina A&T State University; Robin Guill Liles, North Carolina A&T State University; Courtney Lambeth, North Carolina A&T State University; Prashant N. Kumta, University of Pittsburgh; Harvey S. Borovetz, University of Pittsburgh; Sarah K. Pixley, University of Cincinnati, College of Medicine; Partha Roy, University of Pittsburgh; Jangannathan Sankar, North Carolina A&T State University

Tagged Divisions

Graduate Studies, New Engineering Educators, Student

Bootstrapping a New Graduate Curriculum through an Engineering Research CenterAbstract NSF Generation-3 Engineering Research Centers (ERCs) are charged both withadvancing the state-of-the-art in terms of engineering and scientific research as well as training awell-qualified workforce in the domain of expertise. Such an ERC was awarded in 2008 to NorthCarolina A&T State University (NCAT), with the University of Pittsburgh (Pitt) and theUniversity of Cincinnati (UC) as the core US research partner institutions. The focus of thisERC, the ERC for Revolutionizing Metallic Biomaterials (RMB) is the development of advancedmaterials and processes targeted at the biomedical implant and device industry. NCAT has strongresearch

Conference Session

Faculty and Program Developments, Exchanges, and Partnerships

Collection

2011 ASEE Annual Conference & Exposition

Authors

Bob Lahidji, Eastern Michigan University; Walter Tucker, Eastern Michigan University, School of Engineering Technology

Tagged Divisions

International

AC 2011-898: CURRICULUM GLOBALIZATION: INTERNATIONAL EX-CHANGES BETWEEN AMERICAN AND CHINESE UNIVERSITIESBob Lahidji, Eastern Michigan University Bob Lahidji Ph.D, is Professor and The Director of the School of Engineering Technology at Eastern Michigan University. His primary interest and expertise are in the areas of manufacturing process and CNC/CAM. Dr. Lahidji has been involved with the auto industry manufacturing firms as a consultant in the areas of improving manufacturing processes and productivity. He has written numerous articles and is the co-author of the textbook ”Maximize SURFCAM”.Walter Tucker, School of Engineering Technology, Eastern Michigan University Walter Tucker, Ph.D., holds the rank of full

Collection

1999 Annual Conference

Authors

Tom Ward; Elizabeth Alford

Session 2561 Integrating Ethics into the Freshman Curriculum: An Interdisciplinary Approach Elisabeth Alford, Tom Ward University of South CarolinaAbstractTo ensure that undergraduate engineers have a deep and practical understanding of professionalethics, engineering colleges are developing ways to integrate ethics throughout their curriculum.The freshman engineering course is the logical and appropriate time to begin discussion ofprofessional ethics, long before students are confronted with the tough decisions they may haveto make later. The

Conference Session

Chemical Engineering Education: Underclass Years

Collection

2010 Annual Conference & Exposition

Authors

Sundararajan Madihally, Oklahoma State Univ.; Marcus Duffy, Oklahoma State University; Lynn Franzmann, Stillwater; Rebekah Reece, Stillwater; Karen High, Oklahoma State University

Tagged Divisions

Chemical Engineering

Teachers and Students. Page 15.762.1© American Society for Engineering Education, 2010 Integrating Engineering to Middle School Curriculum by Training TeachersABSTRACT. Providing K-12 students an earlier exposure to engineering is recognized as away to prepare them for postsecondary courses. There has been a significant increase inacademies and workshops addressing this concept. Since there is a total turnover of studentseach year, training K-12 teachers has been thought as an efficient approach. Further, teacherscan integrate engineering concepts during the academic year which provides a natural transition.Based on this concept, two

Conference Session

Tricks of the Trade for Teaching I

Collection

2005 Annual Conference

Authors

Donald Carpenter

Using Learning Objectives for Course Design and Curriculum Improvement Donald D. Carpenter Civil Engineering Department Lawrence Technological University, Southfield, MI 48075AbstractLearning Objectives are statements of specific observable actions a student should be able toperform after an established period of time (a lecture, course, or curriculum). LearningObjectives, which are also commonly referred to as Instructional, Teaching, or EducationalObjectives, clarify the expectations of faculty in terms of measurable or observable studentperformance. In other words, these statements describe the ability of

Conference Session

NSF Grantees’ Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

Rebecca A. Atadero, Colorado State University; Meena M. Balgopal, Colorado State University; Karen E Rambo-Hernandez, Colorado State University; Anne Marie Aramati Casper, Colorado State University

Tagged Topics

NSF Grantees Poster Session

Tagged Divisions

Division Experimentation & Lab-Oriented Studies

Paper ID #8700Project-Based Learning in Statics: Curriculum, Student Outcomes, and On-going QuestionsDr. Rebecca A Atadero, Colorado State University Dr. Atadero is an assistant professor in the Department of Civil and Environmental Engineering at Col- orado State University. She earned her Ph.D. in Structural Engineering from the University of California, San Diego. Her research interests include inspection, management and repair of existing structures, FRP for civil engineering application and engineering education.Dr. Meena M Balgopal, Colorado State UniversityDr. Karen E Rambo-Hernandez, Colorado State UniversityMs. Anne

Collection

2023 CIEC

Authors

Afshin Zahraee; Cheng Zhang; David Pratt; Chandramouli V. Chandramouli

ETD 335 Vertical Integration of Experiential Learning in Construction Curriculum with Industry Collaboration Afshin Zahraee, Cheng Zhang, David Pratt, Chandramouli V. Chandramouli Purdue University NorthwestAbstractThis paper proposes to vertically integrate experiential learning components in courses at variouslevels in the Construction Engineering and Management Technology (CEMT) program at PurdueUniversity Northwest (PNW). Specifically, this project focuses on engaging industryprofessionals to incorporate newly developed

Conference Session

PCEE Session 13: Equity in P-12 Engineering Education

Collection

2022 ASEE Annual Conference & Exposition

Authors

Christine Cunningham, Pennsylvania State University; Gregory Kelly, Pennsylvania State University

Paper ID #36657Curriculum Design Principles for Equity in Engineering(Fundamental, Diversity)Christine M Cunningham (Professor Education and Engineering) Dr. Christine M. Cunningham is a Professor of Practice in Education and Engineering at the Pennsylvania State University. She aims make engineering, science, and computational thinking education more equitable, especially for populations that are underserved and underrepresented in STEM. Christine is the founding director of Youth Engineering Solutions (YES), which develops equity-oriented, research-based, and field-tested curricula and professional learning

Conference Session

Technology Integration in Manufacturing Curriculum

Collection

2024 ASEE Annual Conference & Exposition

Authors

Derek M Yip-Hoi, Western Washington University; David Gill P.E., Western Washington University

Tagged Divisions

Manufacturing Division (MFG)

Paper ID #42597Adapting CAD/CAM and CNC Curriculum to Advances in TechnologyDr. Derek M Yip-Hoi, Western Washington University Dr. Yip-Hoi is currently a professor in Manufacturing Engineering at the Department of Engineering and Design at Western Washington University. Previously, he served on the faculties of the University of the West Indies - St. Augustine, the University of Michigan - Ann Arbor, and the University of British Columbia. His research interests lie in the areas of CAD, geometric and solid modeling, machining and CNC, engineering design and ethics, and machine design.Dr. David Gill P.E., Western Washington

Conference Session

Mechanical Engineering: Thermodynamics

Collection

2022 ASEE Annual Conference & Exposition

Authors

Emmanuel Glakpe, Howard University

Paper ID #37700Teaching, Learning, and Understanding of Thermodynamicsin a Mechanical Engineering CurriculumEmmanuel K. Glakpe (Professor) Dr. Emmanuel Glakpe is a professor in the Mechanical Engineering Department at Howard University in Washington DC and a registered professional engineer. He received BSc., M.S., and Ph.D. degrees from the University of Science and Technology, Ghana, Stanford University, CA, and University of Arizona, AZ., respectively. A Fellow of ASME, Dr. Glakpe teaches classes in the Fluid/Thermal Sciences thread of the curriculum in both the undergraduate and graduate programs in the Department

Conference Session

ERM Technical Session 6: Technology-enhanced Instruction and Assessment

Collection

2019 ASEE Annual Conference & Exposition

Authors

Jim Morgan P.E., Charles Sturt University; Euan Lindsay, Charles Sturt University; Colm Howlin, Realizeit; Maartje E. D. Van den Bogaard, Delft University of Technology

Tagged Divisions

Educational Research and Methods

integrates computers, electronics and physical hardware. Prof Lindsay’s background is in Remote laboratories, investigating whether remote and simulated access alternatives to the traditional in-person laboratory experience can provide the high quality learning outcomes for students. Prof Lindsay’s work in Remote and Virtual laboratory classes has shown that there are significant differ- ences not only in students’ learning outcomes but also in their perceptions of these outcomes, when they are exposed to the different access modes. These differences have powerful implications for the design of remote and virtual laboratory classes in the future, and also provide an opportunity to match alternative access modes to the

Conference Session

Two-year College STEM Programs Meeting the Needs of Industry

Collection

2018 ASEE Annual Conference & Exposition

Authors

David I. Spang, Rowan College at Burlington County; Eric Constans, Rose-Hulman Institute of Technology; Edem G. Tetteh, Rowan College at Burlington County

Tagged Divisions

Two-Year College

Paper ID #23264A Model for Aligning Engineering Technology Curriculum with IndustryNeedsDr. David I. Spang, Rowan College at Burlington County Dr. David Spang is the Sr. Vice President & Provost at Rowan College at Burlington County in Mt. Laurel, NJ. Prior to being named Sr. Vice President & Provost, Dr. Spang served as Interim President, Provost, Vice President of Academic Programs and as Dean of the Science, Mathematics, and Technology division. Dr. Spang holds a PhD degree in Materials Science and Engineering and a MBA degree, with a concentration in Innovation and Technology Management. Prior to joining

Conference Session

Using Laboratories for Instruction in Mechanical Engineering

Collection

2016 ASEE Annual Conference & Exposition

Authors

Heather Dillon, University of Portland; Nathan Schmedake, University of Portland; Karen Elizabeth Eifler, University of Portland; Timothy A Doughty, University of Portland; Ken Lulay, University of Portland

Tagged Divisions

Mechanical Engineering

eachlaboratory class as they progress through the curriculum. The main purpose of the module was tocreate a system where a low-cost oven can be completely controlled via a computer. This allowsfor temperature profile and exact temperatures to be maintained for a variety of applications.Since the faculty group was working as a team, we were able to design a laboratory module thatcould be used through the entire curriculum. The sophomores see the oven in a second year 3material science lab as it is used to heat specimens, and for them it is a sophisticated oven thatrecords temperature. However, the next year in a systems and measurement laboratory the samestudents program the oven to create very specific

Conference Session

First-Year Programs Division Technical Session 1: It's All About Teams and Teamwork

Collection

2015 ASEE Annual Conference & Exposition

Authors

James E. Lewis, University of Louisville; Gerold Willing, University of Louisville; Thomas D. Rockaway, University of Louisville

Tagged Divisions

First-Year Programs

Paper ID #11642Peer-led Team Learning in Early General Engineering CurriculumDr. James E. Lewis, University of Louisville James E. Lewis, Ph.D. is an Assistant Professor in the Department of Engineering Fundamentals in the J. B. Speed School of Engineering at the University of Louisville. His research interests include paral- lel and distributed computer systems, cryptography, engineering education, undergraduate retention and technology (Tablet PCs) used in the classroom.Dr. Gerold Willing, University of LouisvilleThomas D. Rockaway, University of Louisville

Conference Session

Industrial Engineering Division Technical Session 1

Collection

2015 ASEE Annual Conference & Exposition

Authors

Mary J. Meixell, Quinnipiac University; Nebil Buyurgan, Quinnipiac University; Corey Kiassat, Quinnipiac University

Tagged Topics

Diversity

Tagged Divisions

Industrial Engineering

. Page 26.436.96. Bibliography[1] Z. Deng, "Curriculum Planning and Systems Change," in International Encyclopedia of Education (Third Edition), B. McGaw, E. Baker, and P. Penelope, Eds. Oxford: Elsevier, 2010, pp. 384-389.[2] H. D. White, "Computing a curriculum: descriptor-based domain analysis for educators," Information Processing & Management, vol. 37, pp. 91-117, 2001.[3] C. M. Bunăiaşu and A.-C. Strungă, "A Potential Methodological Tool in Order to Plan the Curriculum in School," Procedia - Social and Behavioral Sciences, vol. 76, pp. 140-145, 2013.[4] M. E. Gonzalez, G. Quesada, J. Mueller, and R. D. Mueller, "International business curriculum design: identifying the voice of the customer using QFD," Journal of

Conference Session

Developing Systems Engineering Curriculum and Programs

Collection

2016 ASEE Annual Conference & Exposition

Authors

Polinpapilinho Katina, Old Dominion University; Joseph M Bradley, Leading Change, LLC

Tagged Divisions

Systems Engineering

Paper ID #14643Towards a Systems Theory-based Curriculum for Complex Systems Gover-nanceDr. Polinpapilinho Katina, Old Dominion University Polinpapilinho F. Katina serves as a Postdoctoral Researcher with the National Centers for System of Systems Engineering (NCSOSE) at Old Dominion University, Norfolk, Virginia. He received his PhD in Engineering Management and Systems Engineering at Old Dominion University. He also holds a MEng in Systems Engineering and a BSc in Engineering Technology from Old Dominion University. His research interests include critical infrastructure protection, decision making under uncertainty

Conference Session

Engineering Ethics Division Technical Session - Ethics in the Engineering Curriculum

Collection

2019 ASEE Annual Conference & Exposition

Authors

Chris Swan, Tufts University; Alexandra Kulich, Tufts University; Reece Wallace, Tufts University

Tagged Divisions

Engineering Ethics

Unsafe Conditions -- Client Request for SecrecyAppendix B – Bibliography of 17 non-BER Case StudiesA. Valukas, “Report to Board of Directors of General Motors Company Regarding IgnitionSwitch Recalls,” Jenner & Block, 2014. [Online]. Available: https://www.aieg.com/wp-content/uploads/2014/08/Valukas-report-on-gm-redacted2.pdf“Backgrounder on the Three Mile Island Accident,” United States Nuclear RegulatoryCommission, 2018. [Online]. Available: https://www.nrc.gov/reading-rm/doc-collections/fact-sheets/3mile-isle.htmlCarnegie Mellon School of Computer Science. (2019). Engineering Ethics TranscriptionExercise: Cases. [online] Available at:http://www.cs.cmu.edu/~bmclaren/ethics/caseframes/index.html“Ceiling Collapse in the Interstate 90

Conference Session

Trends and Applications in Curricula and the Capstone Experience

Collection

2013 ASEE Annual Conference & Exposition

Authors

Kristen L. Sanford Bernhardt, Lafayette College; David S. Hurwitz, Oregon State University; Rhonda K Young, University of Wyoming; Rod E. Turochy, Auburn University; Shane A. Brown P.E., Washington State University; Joshua Swake, Oregon State University; Andrea R. Bill, University of Wisconsin-Madison; Kevin Heaslip, Utah State University; Michael Kyte, University of Idaho, Moscow

Tagged Divisions

Civil Engineering

Paper ID #6325A Model for Collaborative Curriculum Design in Transportation Engineer-ing EducationDr. Kristen L. Sanford Bernhardt, Lafayette College Dr. Kristen Sanford Bernhardt is chair of the Engineering Studies program and associate professor of Civil and Environmental Engineering at Lafayette College. Her expertise is in sustainable civil infrastructure management and transportation systems. She teaches a variety of courses including sustainability of built systems, transportation systems, transportation planning, civil infrastructure management, and Lafayette’s introductory first year engineering course. Dr

Conference Session

Capstone Courses in Construction

Collection

2012 ASEE Annual Conference & Exposition

Authors

Mohsin K. Siddiqui, King Fahd University of Petroleum & Minerals; Sulaiman Dawood Alrasheed, Saudi Aramco; Abdul Rahman Mohammed, King Fahd University of Petroleum & Minerals; Azfar Amaan, King Fahd University of Petroleum & Minerals; Waheed Hussain Aljaroudi P.E.; Abdullah Ahmed Al-Jughaiman, King Fahd University of Petroleum & Minerals; Fayez Mohsen Alsaikhan, King Fahd University of Petroleum & Minerals; Bahir Mohamad Alhashem

Tagged Divisions

Construction

AC 2012-3110: INTEGRATING SUSTAINABILITY IN THE CURRICU-LUM THROUGH CAPSTONE PROJECTS: A CASE STUDYDr. Mohsin K. Siddiqui, King Fahd University of Petroleum & Minerals Mohsin K. Siddiqui is an Assistant Professor of construction engineering and management (CEM) at the King Fahd University of Petroleum and Minerals (KFUPM), Dhahran, Saudi Arabia. He is also a project management training consultant for the Saudi Aramco oil company. Siddiqui holds a Ph.D. in civil engineering (CEM) and M.S. degrees in civil engineering (CEM) and computer sciences (CS). Siddiqui’s research interests focus on scheduling, technology-aided construction management, and human technology interactions. In addition to peer review roles for

Conference Session

Teaching Technological Literacy - College Courses and Minors

Collection

2010 Annual Conference & Exposition

Authors

Austin Talley, University of Texas, Austin; Christina White, Columbia University; Kristin Wood, University of Texas, Austin; Richard Crawford, University of Texas at Austin

Tagged Divisions

Technological Literacy Constituent Committee

AC 2010-805: DESIGNING INTERDISCIPLINARY CURRICULUM & TEACHING:INVESTIGATING INNOVATION & OUR ENGINEERED WORLDAustin Talley, University of Texas, Austin Austin Talley is a graduate student in the Mechanical Engineering Department at the University of Texas at Austin, a Cockrell Fellow, and a licensed Professional Engineer. His research focus is in design methodology with Universal Design and engineering education. He has received his B.S. from Texas A&M University and M.S.E. from The University of Texas at Austin. Contact: Austin@talleyweb.comChristina White, Columbia University Christina White is a doctoral candidate in Curriculum & Teaching at Teachers College, Columbia

Conference Session

Engineering Ethics Division Technical Session

Collection

2013 ASEE Annual Conference & Exposition

Authors

Carla B. Zoltowski, Purdue University, West Lafayette; Patrice Marie Buzzanell, Purdue University, West Lafayette; William C. Oakes, Purdue University, West Lafayette

Tagged Divisions

Engineering Ethics

Paper ID #7607Utilizing an Engineering Ethical Reasoning Instrument in the CurriculumDr. Carla B. Zoltowski, Purdue University, West Lafayette Carla B. Zoltowski, Ph.D., is Education Administrator of the EPICS Program at Purdue University. She received her B.S. and M.S. in electrical engineering and Ph.D. in engineering education, all from Purdue University. She has served as a lecturer in Purdue’s School of Electrical and Computer Engineering. Dr. Zoltowski’s academic and research interests include human-centered design learning and assessment, service-learning, ethical reasoning assessment, leadership, and assistive

Conference Session

NSF Grantees Poster Session

Collection

2024 ASEE Annual Conference & Exposition

Authors

Michael Johnson, Texas A&M University; Amarnath Banerjee, Texas A&M University; Bimal P. Nepal, Texas A&M University; Rutwik Dehade, Texas A&M University; Glen Miller

Tagged Topics

NSF Grantees Poster Session

Engineering at Texas A&M University since 1999. His research interests are in modeling and analysis of complex systems and processes, simulation and visualization, and their applications in manufacturing, healthcare, energy, and information systems. He teaches a number of courses in these areas at the undergraduate and graduate levels, and has developed several of these courses. He is currently leading the effort in designing a new undergraduate program in Data Engineering. He is a Fellow of the Institute of Industrial and Systems Engineers (IISE). He served in the Board of the Computer and Information Systems Division of IISE, serves as an Associate Editor of IISE Transactions on Healthcare System Engineering, and is

Conference Session

Improving Student Problem Solving and Performance

Collection

2024 ASEE Annual Conference & Exposition

Authors

Alyssa Powell, University of California, San Diego; Justin Paul Opatkiewicz, University of California, San Diego

Tagged Divisions

Chemical Engineering Division (ChED)

Paper ID #42979Quantitative and Qualitative Analysis of a Curriculum-Wide Chemical ProcessProjectDr. Alyssa Powell, University of California, San Diego Alyssa Powell is an Assistant Teaching Professor at University of California San Diego.Dr. Justin Paul Opatkiewicz, University of California, San Diego Teaching Professor of Chemical Engineering in the NanoEngineering Department at UCSD since 2012. ©American Society for Engineering Education, 2024 Quantitative and Qualitative Analysis of a Curriculum-Wide Chemical Process ProjectAbstractThe chemical engineering program at

Conference Session

First-year Programs: Focus on Student Success 2

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Elizabeth Anne Stephan, Clemson University; Abigail T. Stephan, Clemson University; Baker A. Martin, Clemson University; Matthew K. Miller, Clemson University

Tagged Divisions

First-Year Programs

Paper ID #33016Exploring Engineering: Peer-sharing Presentations in First-yearEngineering CurriculumDr. Elizabeth Anne Stephan, Clemson University Dr. Elizabeth Stephan is the Director of Academics for the General Engineering Program at Clemson University. She holds a B.S. and a Ph.D. in Chemical Engineering from the University of Akron. Since 2002, she has taught, developed, and now coordinates the first-year curriculum. She is the lead author of the ”Thinking Like an Engineer” textbook, currently in its 4th edition.Ms. Abigail T. Stephan, Clemson University Abigail Stephan is a doctoral candidate in the Learning