Baltimore , Maryland
June 25, 2023
June 25, 2023
June 28, 2023
Chemical Engineering Division (ChED) Technical Session 8: Lab Module Development
Chemical Engineering Division (ChED)
20
10.18260/1-2--42964
https://peer.asee.org/42964
277
Andrew Maxson is an associate professor of practice in chemical engineering at The Ohio State University where he teaches Chemical Engineering Unit Operations. He earned his B.S. in chemical engineering from Rose-Hulman Institute of Technology and his M.S. and Ph.D. in chemical engineering at Ohio State. Having worked as a manufacturing process engineer for ten years, his focus is on optimizing the process of teaching at scale, as well as hands-on, practical engineering concepts relevant to chemical engineers entering industry.
Pumping is ubiquitous in the chemical processing industry, and many Chemical Engineering Unit Operations Laboratories include pumping among the experiments operated by undergraduate engineering students.
A new Unit Operations Laboratory pumping experiment was designed and constructed at [Name of University] in Summer of 2022. The apparatus consists of a feed tank, pressure sensor, throttle valve, electromagnetic flow meter, two pumps, two variable frequency drives, two differential pressure sensors, four pipe sections of varying diameter, and an automatic data acquisition system for logging flow rate, head pressure, pressure drop, and motor power input. The total cost of the system was approximately $12,000.
This paper provides a detailed list of all parts of the pumping apparatus, including pipes, fittings, instruments, and equipment, along with the part number, vendor, and cost of each component. A detailed construction / assembly drawing is also provided so that other Unit Operations Laboratories can easily "steal this experiment."
This paper also discusses the learning objectives of the experiment and how they are achieved in the lab. After completing the pumping lab, students should be able to: 1. Safely operate centrifugal and positive displacement pumps, 2. Predict pressure drop through a horizontal pipe section, 3. Calculate pump efficiency, 4. Construct and interpret pump performance curves, and 5. Perform statistical tests to analyze the effects of the independent variables in the experiment on the dependent variables.
The experimental design carried out by students is also presented, along with a sample of the data generated and the calculations and statistical analysis performed in order to achieve the learning objectives in the experiment.
Maxson, A., & Strayer, J. (2023, June), Design, Construction, and Analysis of a Chemical Engineering Unit Operations Laboratory Pumping Experiment Paper presented at 2023 ASEE Annual Conference & Exposition, Baltimore , Maryland. 10.18260/1-2--42964
ASEE holds the copyright on this document. It may be read by the public free of charge. Authors may archive their work on personal websites or in institutional repositories with the following citation: © 2023 American Society for Engineering Education. Other scholars may excerpt or quote from these materials with the same citation. When excerpting or quoting from Conference Proceedings, authors should, in addition to noting the ASEE copyright, list all the original authors and their institutions and name the host city of the conference. - Last updated April 1, 2015