storage, and advanced manufacturing.Prof. Chih-Ping Yeh, Wayne State University Chih-Ping Yeh received his BS in Electrical and Electrnoic Engineering from TamKung University in Taiwan, MS and Ph.D. in Electrical Engineering from Texas A&M University in College Station, Texas. He is the Chair of the Division of Engineering Technology at Wayne State University in Detroit, Michigan.Dr. Chung-Tse Michael Wu, Wayne State University Dr. Chung-Tse Michael Wu is currently an Assistant Professor at the Department of Electrical and Com- puter Engineering at Wayne State University (WSU), Michigan, USA. His research interests include ap- plied electromagnetics, antennas, passive/active microwave and millimeter-wave components
Design Engineering and the Blended Learning Unit at the University of Hertfordshire, UK. Page 12.1568.1© American Society for Engineering Education, 2007 Using technology to support engineering laboratory studiesAbstractLearning requires activities that facilitate exploration, personal (first-hand) experience as wellas provide opportunities for students to develop and re-conceptualise their growingknowledge. Laboratory studies present an ideal opportunity for such personal action andreflection whilst also bringing some of the classroom activity to life. Although carefullyconsidered laboratory studies have the potential
Paper ID #8900Quality of Life Technology Research Experience for Veterans/Teachers Pro-gramMr. Mahender Mandala, HERL/VAPHS Mahender Mandala received a B.Engg. in Mechanical Engineering from Osmania University at Hyder- abad, India (2008), M.S. in Mechanical Engineering from the University of Kansas at Lawrence, KS (2011) and is currently a doctoral student at the University of Pittsburgh (Pittsburgh, PA) studying Re- habilitation Science and Technology. His primary interest lies in the fields of Product Design, Design Education and Statistics.Dr. Mary R Goldberg, University of Pittsburgh Mary Goldberg, MEd received
2006-2584: AIRCRAFT MAINTENANCE TECHNOLOGY EDUCATION:INTEGRATING ASYNCHRONOUS TECHNOLOGY & VIRTUAL REALITYSajay Sadasivan, Clemson University Mr. Sajay Sadasivan is a Research Assistant in the Department of Industrial Engineering at Clemson University, South Carolina, USA. He is currently pursuing his PhD degree and is focused on aviation inspection training and investigating the effects of visual and behavioral fidelity on human performance in virtual simulators.Deepak Vembar, Clemson University Mr. Deepak Vembar is a Research Assistant in the Department of Computer Science at Clemson University, South Carolina, USA. He is currently pursuing his PhD degree and his research interests
2006-531: CALIFORNIA REGIONAL CONSORTIUM FOR ENGINEERINGADVANCES IN TECHNOLOGICAL EDUCATIONSharlene Katz, California State University-Northridge Sharlene Katz is Professor in the Department of Electrical and Computer Engineering at California State University, Northridge (CSUN) where she has been for over 25 years. She graduated from the University of California, Los Angeles with B.S. (1975), M.S. (1976), and Ph.D. (1986) degrees in Electrical Engineering. Recently, her areas of research interest have been in engineering education techniques and neural networks. Dr. Katz is a licensed professional engineer in the state of California.Kathleen Alfano, College of the Canyons Kathleen
2006-1596: AN EXPERIMENT BASED STRUCTURAL DYNAMICS COURSE FORENGINEERING TECHNOLOGY STUDENTSJorge Tito-Izquierdo, University of Houston-Downtown Jorge Tito-Izquierdo is Visiting Associate Professor of Engineering Technology. Dr. Tito-Izquierdo received his Ph.D. and M. Sc. Degrees from the University of Puerto Rico, Mayagüez, Puerto Rico, in Civil Engineering with a major in Structures. He received the Civil Engineer Degree from the Pontifical Catholic University of Peru. Dr. Tito has experience in teaching structural design, and construction management, and is a Registered Professional Engineer.Alberto Gomez-Rivas, University of Houston-Downtown Alberto Gomez-Rivas is Professor
ATMAE Senior Certified Technology Manager and earned his PhD from Iowa State University in 2007. Page 24.509.1 c American Society for Engineering Education, 2014 Engineering Technology Pathways: The Food and Foodstuff Supply ChainIntroduction The proposed Engineering Technology Pathways: Food and Foodstuff Supply Chain is among thefirst Engineering Technology program in which a community college and major research university offerarticulated degrees with a concentration in the food and foodstuff supply chain. Demand for Americanfoodstuffs has helped the United States maintain its
AC 2008-2856: NAVY OUTREACH: SCIENCE AND TECHNOLOGY EDUCATIONPARTNERSHIPDouglass Sugg, Navy Department Head at the Naval Surface Warfare Center in Corona, California Board member of several professional Measurement Science organizations.John Fishell, STEP Attorney and Counsel Science and Technology Education Partnership (STEP) Executive Board of Directors Page 13.921.1© American Society for Engineering Education, 2008 NAVY OUTREACH: The Science and Technology Education Partnership (STEP) ProgramAbstract:The Science and Technology Education Partnership (STEP) is addressed as an
Paper ID #8508Digital Technology Education Collaborative First Year Progress ReportDr. Nasser Alaraje, Michigan Technological UniversityProf. Aleksandr Sergeyev, Michigan Technological University Aleksandr Sergeyev is currently an Associate Professor in the Electrical Engineering Technology program in the School of Technology at Michigan Technological University. Dr. Aleksandr Sergeyev earned his bachelor degree in Electrical Engineering at Moscow University of Electronics and Automation in 1995. He obtained the Master degree in Physics from Michigan Technological University in 2004 and the PhD degree in Electrical
2006-339: NATIONAL RESOURCE CENTER FOR MATERIALS TECHNOLOGYEDUCATIONMel Cossette, Edmonds Community CollegeThomas Stoebe, University of WashingtonJohn Rusin, Edmonds Community CollegeRobert Mott, University of DaytonRobert Simoneau, Keene State University Page 11.952.1© American Society for Engineering Education, 2006session number 1526The National Science Foundation has recently funded a project at Edmonds Community Collegethat will create a National Resource Center for Materials Technology Education. The objectiveof this project is to develop a clearinghouse of teaching materials for the broad field of materialstechnology. All materials considered for this Resource Center will
Paper ID #11129Updates to a Sequence of Fluids Lab Experiments for Mechanical Engineer-ing Technology StudentsMr. Roger A Beardsley PE, Central Washington University Roger Beardsley is an associate professor of Mechanical Engineering Technology at Central Washington University, Ellensburg WA. He teaches classes in Thermodynamics, Fluids and Heat Transfer, among others. His professional interests include renewable energy, including biofuels. Page 26.1633.1 c American Society for Engineering Education
AC 2012-3242: TEACHING ADAPTIVE FILTERS AND APPLICATIONSIN ELECTRICAL AND COMPUTER ENGINEERING TECHNOLOGY PRO-GRAMProf. Jean Jiang, Purdue University, North Central Jean Jiang is currently with the College of Engineering and Technology at Purdue University, North Central, Westville, Ind. She received her Ph.D. degree in electrical engineering from the University of New Mexico in 1992. Her principal technical areas are in digital signal processing, adaptive signal processing, and control systems. She has published a number of papers in these areas. She has co-authored two textbooks: Fundamentals of Analog and Digital Signal Processing, Second Edition, AuthorHouse, 2008; and Analog Signal Processing and Filter Design
Paper ID #9543Science, Technology, Engineering and Mathematics (STEM) Careers: Strate-gies for Engaging and Recruiting GirlsDr. Marilyn Barger, FLATE (Florida Advanced Technological Education Center of Excellence) Dr. Marilyn Barger is the Principal Investigator and Executive Director of FLATE, the Florida Regional Center of Advanced Technological Education, funded by the National Science Foundation and housed at Hillsborough Community College in Tampa, Florida since 2004. FLATE serves the state of Florida as its region and is involved in outreach and recruitment of students into technical career pathway; has produced
journals. He is a registered Professional Engineer (PE) in South Carolina and ETAC of ABET reviewer for Electrical Engineering Technology and Computer Engineering Technology. Page 24.1098.1 c American Society for Engineering Education, 2014 SSTEM Scholarship - A Scholarship Program to Enhance Education in Computer Science and Engineering Technology AbstractUniversity XYZ is the only public, historically black college and university of state XYZ, seeks torecruit and provide scholarships to academically talented students with financial
Paper ID #6248Updates to a Sequence of Thermodynamics Experiments for Mechanical En-gineering Technology StudentsMr. Roger A Beardsley PE, Central Washington University Roger Beardsley PE is an associate professor of Mechanical Engineering Technology at Central Wash- ington University in Ellensburg WA. Mr. Beardsley teaches undergraduate courses in thermodynamics, heat transfer, fluids, and machine design. His professional interests include energy conversion, renewable energy and sustainability issues. Page
2006-1424: LABORATORY DEVELOPMENT FOR ROBOTICS ANDAUTOMATION EDUCATION USING INTERNET BASED TECHNOLOGYRichard Chiou, Drexel University Dr. Richard Chiou is currently Associate Professor of Applied Engineering Technology at Drexel University in Philadelphia. Dr. Chiou received his Ph.D. degree in Mechanical Engineering from Georgia Institute of Technology in 1995. His areas of education and research emphasis include machining, mechatronics, and Internet based robotics and automation. Dr. Chiou incorporates real-world problems into his research and teaching. He has secured many research and education grants from the NSF, the SME Education Foundation, and industries.Yongjin Kwon, Drexel
Paper ID #8911Dissemination of Microprocessor Courses through Classroom and InteractiveCyber-Enabled TechnologiesDr. Steve C. Hsiung, Old Dominion University Steve Hsiung is an associate professor of electrical engineering technology at Old Dominion University. Prior to his current position, Dr. Hsiung had worked for Maxim Integrated Products, Inc., Seagate Tech- nology, Inc., and Lam Research Corp., all in Silicon Valley, CA. Dr. Hsiung also taught at Utah State University and California University of Pennsylvania. He earned his BS degree from National Kauhsi- ung Normal University in 1980, MS degrees from University of
AC 2007-2262: USING VIRTUAL MACHINE TECHNOLOGY IN ANUNDERGRADUATE INTRUSION DETECTION LABPeng Li, East Carolina University Peng Li is an Assistant Professor in the Department of Technology Systems at East Carolina University. His professional certifications include CISSP, LPIC and SCSECA. He received a Ph.D. in Electrical Engineering from University of Connecticut.Philip Lunsford, East Carolina University Phil Lunsford received a B.S. in Electrical Engineering and a M.S. in Electrical Engineering from Georgia Institute of Technology and a Ph.D. in Electrical Engineering from North Carolina State University. He is a registered professional engineer and is currently an Assistant Professor at
Performance Polymers and Composites (HiPPAC) Center. Presently, he is a professor of mechanical engineering technology and the Director of the Center for Advanced Materials Research and Education (CAMRE) at the Southern Polytechnic State University. Veazie was named the National Technical Achiever and National Educator of the Year by the National Technical Association, and he is the recipient of the Faculty Award for Research from NASA, the SAIC Award for Advising Excellence for the Research Papers, the School of Arts & Sciences Best Mentor Award, and has more than 60 refereed publications and conference proceedings. Veazie has 20 years experience in mechanical property characterization and durability of composite
2006-346: HOW TO RESCUE A POORLY OPERATING EXPERIMENT IN ANENGINEERING TECHNOLOGY LAB AND TURN IT INTO A "REAL-WORLD"LEARNING LESSONFrancis Di Bella, Northeastern UniversityMichael Koplow, Northeastern University Mr.Koplow is an ADjunct instructor at Northeastern University and has instructed Thermodynamics for the mechanical engineering technology unit. He has over 30 years of experience in energy research and also operates a consulting company, Emdot Engineering. Page 11.702.1© American Society for Engineering Education, 2006 ASEE 2006 Annual Conference 2006-346
AC 2010-1209: NEW DIRECTIONS IN ENGINEERING EDUCATION: THEDEVELOPMENT OF A VIRTUAL LAB COURSE IN ELECTRONIC CIRCUITS ATMICHIGAN TECHNOLOGICAL UNIVERSITYGlen Archer, Michigan Technological University Glen Archer is a senior lecturer in the Department of Electrical and Computer Engineering at Michigan Technological University. He received his BSEE from Texas Tech University. He brings nearly 30 years of experience as a U.S. Air Force officer to the university setting. He retired from the Air Force at his final assignment as the Commandant of Cadets at AFROTC Detachment 400 at Michigan Tech. He earned an MA in Information Systems Management from Webster University. He currently teaches Circuits and
Page 24.458.1 c American Society for Engineering Education, 2014 Effectively engaging engineers in ethical reasoning about emerging technologies: A cyber-enabled framework of scaffolded, integrated, and reflexive analysis of casesAbstract: Training future engineers to effectively handle ethical dilemmas they will encounterin developing and implementing new technology is a critical and relevant challenge for a nationthat is advancing science and engineering technologies at an ever increasing rate. Each yearthousands of new engineers join the workforce and face novel issues raised by radicaltechnological advances. Concurrently, changing societal responses to new technologies
Society of Plastics Engineers’ Composites Division.Dr. Dominick Esperanza Fazarro, University of Texas at Tyler Dominick Fazarro is the Coordinator of the Nanotechnology focus group for ATMAE and IEEE Senior Member of the Nanotechnology Council. He is currently an Associate Professor in the Department of Human Resource Development and Technology at the University of Texas at Tyler. He is currently re- searching nanotechnology education, nanotechnology workforce development, and NANO-SAFETY.Dr. J. Craig Hanks, Texas State University, San Marcos Dr. Hanks is Professor of Philosophy, an Affiliate Professor of Materials Science, Engineering, and Com- mercialization, and a member of the Steering Committee for the
Paper ID #10325Teaching Digital Signal Processing Course with a Real-Time Digital CrossoverSystem for Electrical and Computer Engineering Technology StudentsProf. Jean Jiang, Purdue University, North Central DR. JEAN JIANG is currently with the College of Engineering and Technology at Purdue University North Central in Westville, Indiana. She received her Ph.D. degree in Electrical Engineering from the University of New Mexico in 1992. Before she joined Purdue University in 2009 as a faculty member, Dr. Jiang had taught analog signal processing, digital signal processing, and control systems for a number of years as a
2006-1337: IMPLEMENTATION OF A PROBLEM-FINDING ANDPROBLEM-SOLVING ORIENTED ENGINEERING EXPERIMENT COURSE IN ALARGE CLASSNobuyuki Kitashoji, Kanazawa Institute of Technology Dr.Eng., Assistant Professor Practical Engineering Education Program Nobuyuki Kitashoji is an assistant professor of the Division of Practical Engineering Education Program at the Kanazawa Institute of Technology in Japan. He has been engaged in the problem-finding and problem-solving oriented engineering experiment course since 1999, endeavoring to improve a learning environment and textbooks so that students will be able to flexibly apply an experiment to deal with problems in any field. He has experience in research in
AC 2010-310: THE SCIENCE AND TECHNOLOGY EDUCATION PARTNERSHIP (STEP): GROWTH,CHALLENGES AND OPPORTUNITIES IN STEM OUTREACHDouglas Sugg, United States NavyElizabeth Gentry, National Institute of Standards and TechnologyJohn Fishell, STEP Conference Page 15.1254.1© American Society for Engineering Education, 2010 The Science and Technology Education Partnership (STEP): Growth, Challenges and Opportunities in STEM OutreachAbstract:This paper explores a comprehensive and proactive approach that is currently being used by theScience and Technology Education Partnership (STEP) Program in Southern California to helpensure that the pipeline of
Paper ID #16656Developing In-Class Experiments for Fluid and Thermal Science Courses forTechnology StudentsMr. Robert Edwards, Pennsylvania State University - Erie Bob Edwards is a Lecturer of Engineering at Penn State Erie, The Behrend College, teaching in the Mechanical Engineering Technology department. He has a Bachelors in Mechanical Engineering from Rochester Institute of Technology and a Masters in Engineering from Gannon University. His primary area of interest is in the thermal sciences. He teaches thermodynamics, heat transfer and a thermal sci- ences course for Electrical Engineering Technology students. He has
2006-480: EFFECTIVE INTEGRATION OF ELECTROMAGNETICCOMPATIBILITY AND SIGNAL INTEGRITY IN ELECTRICAL ANDCOMPUTER ENGINEERING CURRICULAEdward Wheeler, Rose-Hulman Institute of Technology Edward Wheeler is Associate Professor in Electrical and Computer Engineering at Rose-Hulman Institute of Technology. He received a Ph.D. in electrical engineering from the University of Missouri-Rolla in 1996. His interests include electromagnetic compatibility, the electrical and optical properties of materials, and engineering education.JianJian Song, Rose-Hulman Institute of Technology Jianjian Song is Associate Professor of Electrical and Computer Engineering at Rose-Hulman Institute of Technology. He received a
AC 2008-83: DEVELOPMENT OF AN INTERDISCIPLINARY LABORATORYCURRICULUM FOR EMERGING PRODUCT MANUFACTURINGFrank Liou, Missouri University of Science & Technology Frank Liou is a Professor in the Mechanical Engineering Department at the Missouri University of Science and Technology (MST). He currently serves as the Director of the Interdisciplinary Manufacturing Engineering Program at MST. His teaching and research interests include CAD/CAM, rapid prototyping, and rapid manufacturing. He has published over 150 technical papers, and has research grants and contracts over $8M. Page 13.422.1© American
Paper ID #19189Optimizing Efficiency and Effectiveness in a Mechanical Engineering Labo-ratory using Focused ModulesDr. Jeffrey A. Donnell, Georgia Institute of Technology Jeffrey Donnell is the Frank K. Webb Chair in Professional Communication at Georgia Tech’s George W. Woodruff School of Mechanical EngineeringMr. Philip Varney, Georgia Institute of Technology Phil Varney is currently a teaching instructor at Georgia Tech, where he is also completing his PhD degree in rotor fault diagnostics.Dr. David MacNair, Georgia Institute of Technology Dr. MacNair serves as Director of Laboratory Development in the Woodruff School