Paper ID #23357Impacts on Teaching Practices from a Solar Photovoltaic Institute FacultyProfessional Development ProgramDr. Kenneth Walz, Madison Area Technical College Dr. Walz completed his Ph.D. at the University of Wisconsin in Environmental Chemistry and Tech- nology, while conducting electrochemical research on lithium-ion batteries with Argonne National Lab- oratory and Rayovac. His studies also included research with the University of Rochester Center for Photo-Induced Charge Transfer. Since 2003, Dr. Walz has taught chemistry and engineering at Madi- son Area Technical College, where he serves as the the Director
.""The ImpactThe impact of this project on the students, faculty and departments was large. As stated aboveopportunity for visibility was high. The mentor was invited to speak at several occasions and thestudents received extensive exposure to the public policy decision making process.The FutureThe H2-Tractor project continues for a second design sequence in the ME department to addressproblems identified above and to extend a broadened research program. Although the skill set ofthe current team is not quite as serendipitous as the first team, these students are quite capable in Page 13.167.8the right. An added
energy. In the private sector, he developed an extensive experience training junior engineers just coming out of college. More recently, he has been involved in supervising graduate students and coordinating group based senior projects.Dr. Andrew Davol, California Polytechnic State University, San Luis ObispoMiss Huy Anh Duong, Mechanical Engineering Department Cal PolyTrent Hamilton c American Society for Engineering Education, 2020 Development of a Multidisciplinary Renewable Energy Laboratory for Research and Education Dr. Jacques J. Belanger, Dr. Andrew Davol, Huy Duong, Trent Hamilton California Polytechnic State University, San Luis Obispo
. Investigate Strategies to minimize Negative impacts of soiling on PV Panel efficiency (S. Randall)Conduct a research study to investigate strategies to minimize the negative impacts of soiling onphotovoltaic (PV) panel efficiency and reduce the cost-per-kilowatt hour of electricity producedwithin the context of Minnesota’s mid-latitude, mid-continental climate.Round 2 Grants:6. Axial Flux Generator Improvement (V. Winstead)Develop a viable enhanced axial flux generator design with integrated ultracapacitor storage andVirtual Synchronous Generator (VSG) characteristic. Test and validate the design to ensurerobust operability and demonstrate the enhanced capability for improved grid interoperability.Design and construct prototype axial flux
reducing greenhouse emissions; focusing on creative strategies for improving energy performance in buildings; reducing the need for carbon-based fuels in the energy supply; and encouraging occupant behaviors that reduce the net environmental impact of the campus. Through our unique requirement for all undergraduate students to enroll in two Interprofessional Projects ( IPRO) courses, and the simultaneous offering of a broad array of graduate and undergraduate research projects, IIT students are getting involved in many ongoing energy and sustainability initiatives using campus energy and sustainability operations as a real-world and practical laboratory. These projects include: micro grid (smart grid) and renewable
industrial practice to slow down the depletion of energy resources and subsequentenvironmental impacts. Achieving these goals would be a complex gradual process and requires aparadigm shift in product and process design. In the academia, this awareness underscores need forreforming curriculum so that graduates of programs are ready to lead these changes in real life practices.National Science Foundation funds projects to update engineering curriculum for comprehensive teachingof energy utilization in different undergraduate programs. Among them, the process intensification project[3] integrated energy efficiency and safety in several engineering courses. US Department of Energypromotes best practices in energy efficiency, reusable energy, waste
overviews thestudent exploration of various techniques used by construction professionals, property ownersand policy makers that promote the aesthetic and economic benefits of green construction.The research gathered by the students resulted in the following reports produced byundergraduate students and compiled by graduate students. The compendium of constructionpractices from the student perspective that bring to light the advantages of implementing greenconstruction include the following five sustainability topical areas: Educating Property Ownersand Buyers, A Greener World – Green Construction Practices to Rebuild and Preserve, GreenerRoofs for A Greener Community, Benefits of Protective Construction Practices and TreeConservation through
Paper ID #21690Integrated Learning In Context for Heat Exchanger AnalysisDr. Jan T. Lugowski, Purdue University, West Lafayette Jan Lugowski is an Associate Professor of Mechanical Engineering Technology (MET) at Purdue Univer- sity in West Lafayette, IN, where he teaches and conducts research in fluid power and energy systems.Prof. William Hutzel, Purdue University, West Lafayette William (Bill) Hutzel is a Professor in the Department of Mechanical Engineering Technology at Purdue University, where he teaches and conducts research into high performance buildings. c American Society for Engineering
Paper ID #15777Renewable Energy Technician Education: The Impact of International Fac-ulty CollaborationMary Slowinski , M.Ed., CREATE NSF-ATE Mary Slowinski is an educator/consultant specializing in collaborative learning research and design. She received her M.Ed. in Learning Science from the University of Washington and is currently completing her PhD with a dissertation on communities of practice for educators. A co-PI on a National Science Foundation research grant focused on industry/education partnerships, she has worked extensively with the NSF’s Advanced Technological Education program in a variety of consulting
the kiosk staff, public relations, amongothers. The students would work in close coordination with these other teams. The studentsattended bi-weekly “all hands” meetings, where they would regularly report on their progress.This is in addition to the in-class presentations associated with the Senior Design course.The students were charged with the technical design and specifications of the energy kiosk.Many factors would influence the design, including: best practices of energy development workin LEDCs; international and local electrical codes; component availability; and non-technicalconstraints and considerations. The scope of the project and the composition of the project teamprovided an enriching learning environment for the students.3
Paper ID #29546A comparison of the renewable energy and energy storage sectors inGermany and the United States, with recommendations for engineeringteaching practices.Dr. Lisa Bosman, Purdue University-Main Campus, West Lafayette (College of Engineering) Dr. Bosman holds a PhD in Industrial Engineering. Her research interests include STEM Education and the Impacts of Technology on Society. Within the realm of STEM Education, she has done a variety of work in areas including teaching the entrepreneurial mindset, competency-based learning, self-regulated learning, transdisciplinary education, integrating the humanities into
AC 2011-1838: DESCRIPTION OF THREE ALGAE-RELATED INTER-DISCIPLINARY SENIOR DESIGN PROJECTS IN MECHANICAL ENGI-NEERING AND THEIR IMPACT ON STUDENTSTeodora Rutar, Seattle University Teodora Rutar Shuman is a Paccar Associate Professor at Seattle University, Department of Mechanical Engineering. She received a B.S. in Mechanical Engineering from Belgrade University, Yugoslavia, and an M.S. and a Ph.D. in Mechanical Engineering from the University of Washington. She pursues research in electro-mechanical systems for sustainable processing of microalgae. email: teodora@seattleu.eduGregory Mason, Seattle University Page
electrical power generation, including the use of renewableenergy resources. An important aspect of any Introduction to Engineering course is the projector projects which are chosen for the students to work on. Since renewable energy is a relevantand multidisciplinary field, it provides a good topic for a first-year engineering design course,provided the experience is properly designed.This paper describes a successful renewable energy project that has been used for the past sevenyears in an Introduction to Engineering class at a large, public, research university. Details ofthis project and its evolution based on the curricular needs of the university and research-basedbest-practices will be discussed. Some of these research-based best practices
B.S. in Building Construction Management. He earned his M.S. in Urban Planning from Columbia University where he investigated critical environmental justice issues in New York City. His 2010 Ph.D. from Arizona State University was the nation’s first in sustainability. His research, which has been widely published, focuses on the use of renewable energy systems and sustainable building strategies to reduce negative impacts of urbanization. American c Society for Engineering Education, 2021 A Model Passive Solar Home Student Design ProjectAbstract In a course focused on renewable
AC 2011-1793: EDUCATIONAL NEEDS OF THE FUTURE HVAC DESIGNENGINEERPatrick A. Tebbe, Minnesota State University, Mankato Patrick A. Tebbe is an Associate Professor and Graduate Coordinator for mechanical engineering at Min- nesota State University, Mankato. He has degrees in both mechanical and nuclear engineering from the University of Missouri - Columbia. He is a member of ASME, ASEE, and currently serves as a Student Branch Advisor for ASHRAE. Page 22.523.1 c American Society for Engineering Education, 2011 Educational Needs of the Future HVAC Design EngineerI
Ph.D. levels and enter the world of research. However, some of themdo not have an appreciation for the nature of research. To remedy this situation, faculty couldrecommend to these students to visit research labs of different faculty members and volunteer toconduct a short research project. This short research project could be defined by faculty membersas a senior design project for a student team that would be conducted over two academic termsand require 10 hours work per week. The method of involvement of undergraduate students inresearch by faculty members may be one of the key determining factors to motivate them tocontinue their education. Although there are many general studies evaluating the impact ofacademic advising on the students
AC 2012-4683: DESIGNING AND BUILDING COMPETITIVE HYBRIDELECTRIC RACING VEHICLES AS A VALUED TEACHING AND LEARN-ING METHOD FOR UNDERGRADUATE ENGINEERING STUDENTS: ATWO-YEAR REVIEW WITH A PROJECTION OF FUTURE PLANSDr. Robert W. Fletcher, Lawrence Technological University Robert W. Fletcher joined the faculty of the Mechanical Engineering Department at Lawrence Techno- logical University in the summer of 2003, after several years of continuous industrial research, product development and manufacturing experience. Fletcher earned his bachelor’s of science degree in chemical engineering from the University of Washington, in Seattle, Wash., a master’s of engineering in manufac- turing systems from Lawrence Technological
conferences. c American Society for Engineering Education, 2018 RESEARCH-BASED TEACHING IN UNDERGRADUATE THERMOFLUID MECHANICAL ENGINEERING COURSES IN A PRIMARY UNDERGRADUATE UNIVERSITY Farshid Zabihian California State University, Sacramento Sacramento, California, U.S.AAbstractThis paper presents the author’s approach to use open-ended research and design projects assupplement to traditional teaching in undergraduate thermofluid mechanical engineering courses.It is widely accepted that teaching and research in higher education, especially in engineeringprograms, should support and supplement each
technology program accredited by ABET-TAC. The EET program teaches the fundamental elements of circuits, conventional andrenewable electrical power, analog/digital electronics, microcomputers, telecommunications,instrumentation and data acquisition, control systems, and networking principles. The programbegins with a base of introductory classes in math, physics, statistics, and computerprogramming and continues on into practical applications of the EET in industrial settings. AnEET junior student, also a co-author of this paper worked as a summer undergraduate researchstudent involving a number of applied research projects and summer STEM events from May 15through July 31, 2011. The student’s initial role was designing and building a testbed for
, she introduced the first experiential activity for Applied Mechanics courses. She is coordinator and advisor for capstone projects for Engineering Technology.Dr. Michael G. Mauk, Drexel University Michael Mauk is Assistant Professor in Drexel University’s Engineering Technology program. c American Society for Engineering Education, 2016 Training Global Engineers: A Capstone Senior Design Project in Energy Harvesting and SustainabilityAbstractAs the world of engineering becomes more global in character and practice, our instructionalendeavors must follow suit and enable our graduates with the necessary skills to thrive in theircareer. Our task is to prepare students to be more
. Becoming a leader in the Clean Energy Senior Design allowed for the excelling of the program in a way that was never thought possible. By adhering to strict deadlines and turning in quality work, the project was completed on time, while meeting every customer requirement designated. The unparalleled managerial skills that were implemented in the senior design project, which are taught in the military, allowed for an overall project success.Dr. Yan Tang, Embry-Riddle Aeronautical Univ., Daytona Beach Dr. Yan Tang is an associate professor of mechanical engineering at Embry-Riddle Aeronautical Uni- versity in Daytona Beach, Fla. Her current research in engineering education focuses on cognitive load theory, deliberate
Ph.D. from SIUC in 1991 and 2002 respectively. He teaches courses in electric power and machinery, industrial automation, and electric circuits. His research interests include power systems economics, power markets, and electric energy management. Page 14.534.1© American Society for Engineering Education, 2009 Energy Management and Renewable Power Design Projects from a University Power GridAbstractProject-based learning is a recognized method for engaging students. Projects involvingindustrial power systems give students exposure to current methods and practices relevant
area of product development, topology optimization, additive manufacturing, sustainable design, and biomechanics.Awilma Paola Ventura Lugo, Western Michigan University Awilma Ventura is a graduate student in manufacturing engineering at Western Michigan University. She comes from the Dominican Republic and did her undergraduate studies in mechanical engineering at Utah State University. c American Society for Engineering Education, 2019 Virtual instrumentation for study of a fluid power systemIntroductionRecognizing the global demand for energy and its impact on the environment, practice of energyefficiency in all products and processes is essential for future sustainable industries
. Pecen established solar electric boat R & D center at UNI where dozens of students were given opportunities to design solar powered boats. UNI solar electric boat team with Dr. Pecen’s supervision won two times a third place overall in World Championship on solar elec- tric boating, an international competition promoting clean transportation technologies in US waters. He was recognized as an Advisor of the Year Award nominee among 8 other UNI faculty members in 2010- 2011 academic year Leadership Award Ceremony. Dr. Pecen received a Milestone Award for outstanding mentoring of graduate students at UNI, and recognition from UNI Graduate College for acknowledging the milestone that has been achieved in successfully
Paper ID #30133Enlightened Education: Solar Engineering Design to Energize SchoolFacilitiesDr. Kenneth A. Walz, Madison Area Technical College Dr. Walz completed his Ph.D. at the University of Wisconsin, while conducting electrochemical research on lithium-ion batteries with Argonne National Laboratory and Rayovac. His studies also included re- search with the University of Rochester Center for Photo-Induced Charge Transfer. Since 2003, Dr. Walz has taught science and engineering at Madison Area Technical College, where he serves as the director of the Center for Renewable Energy Advanced Technological Education (CREATE
graduates in the department of engineering and technology at WCU,developing an emphasis in electric power engineering plays a vital role in educating the nextgeneration of the region’s power industry workforce.To that end, an undergraduate curriculum development effort was planned and is projected totrain, prepare for research, and educate the students enrolled in the Department of Engineeringand Technology for careers in the power industry. The curriculum includes three fundamentalpower engineering courses: 1. Power Systems 2. Power Electronics 3. Electrical Machines and DrivesThis paper describes in detail the first pilot implementation of the Power Systems coursecomponent entitled “Modern Power Systems Analysis” for Electrical and
School Teachers in a Hispanic Serving InstitutionAbstractIn recent years, Texas A&M University Corpus Christi entered into a partnership with theNuclear Power Institute or NPI to attract students into careers in nuclear power and science. Thepartnership naturally involved both student recruitment and curriculum development efforts. As apart of this recruitment effort, a summer workshop was designed and implemented to train,prepare for research, and educate local area high school teachers for the careers in engineering,engineering technology and the nuclear power industry. First, an outreach effort to local areapublic, private high and junior high schools was organized to advertise and promote theworkshop. After a considerable
skills must be suited for the modern way of doing engineering and to the modernengineering business. One of the drivers for power engineering education at the graduate level isthe pertinence and excitement of research projects. However, the long term research work onmore difficult topics tends to be more motivational for graduate students and to encourageundergraduate students to pursue graduate studies in power and energy engineering. A full list ofgrand challenges is too expensive to produce, but a sampling below illustrates the types ofmaterial that excite and may serve to recruit) students. Among the new attractive research powerand energy areas are: conducting research to effectively develop and design commercial super-conductivity
Paper ID #13952Concentrated Solar, Dual Axis-Tracking, Multi-junction GaAs Cell Photo-voltaic System Design for Efficient Solar Energy ConversionDr. Mustafa G. Guvench, University of Southern Maine Dr. Guvench received M.S. and Ph.D. degrees in Electrical Engineering and Applied Physics from Case Western Reserve University. He is currently a full professor of Electrical Engineering at the University of Southern Maine. Prior to joining U.S.M. he served on the faculties of the University of Pittsburgh and M.E.T.U., Ankara, Turkey. His research interests and publications span the field of microelectronics including I.C
graduate programs are growing, thought stillprimarily teaching based. Research work is required at the doctorate degree level.In May of 2006 Lawrence Technological University (LTU), with the author serving as thePrincipal Investigator, received a research contract from the Auxiliary Power Group within theUS Army Tank-Automotive Research, Development and Engineering Center (TARDEC), inWarren, Michigan, to undertake durability and reliability testing on two Ballard NEXA 1.2 kWproton exchange membrane fuel cells. Contract discussions had been underway for severalmonths prior to the formal contract award. This project involved three components: a literaturesearch to develop a detailed test plan for a NEXA fuel cell system, design and install a