Conference Session

Innovative Energy Projects

Collection

2012 ASEE Annual Conference & Exposition

Authors

Alamgir A. Choudhury, Western Michigan University; Jorge Rodriguez P.E., Western Michigan University; Jian Peng He, Western Michigan University; Ryan Kamm; Saleem Hason Hinton; Brandon De Young

Tagged Divisions

Energy Conversion and Conservation

industrysponsored student project for design and development of a human powered transportation systemis presented. It allows a single rider to move in all types of terrain by transferring power to thedrive train through the use of a biodegradable hydraulic fluid. Besides the design criteriaspecified by the project sponsor, functionality, safety and reliability, manufacturability, and costeffectiveness are focus of this design process. Overall design objective is to minimize the weightand maximize energy efficiency of the low power hydraulic drive train. Among the innovativehuman powered transportation ideas, an upright carbon fiber configuration is adapted. Itoptimizes rider comfort, weight and provides support of all hydraulic components and drivetrain

Conference Session

Innovative Energy Projects

Collection

2012 ASEE Annual Conference & Exposition

Authors

Robert W. Fletcher, Lawrence Technological University

Tagged Divisions

Energy Conversion and Conservation

AC 2012-4683: DESIGNING AND BUILDING COMPETITIVE HYBRIDELECTRIC RACING VEHICLES AS A VALUED TEACHING AND LEARN-ING METHOD FOR UNDERGRADUATE ENGINEERING STUDENTS: ATWO-YEAR REVIEW WITH A PROJECTION OF FUTURE PLANSDr. Robert W. Fletcher, Lawrence Technological University Robert W. Fletcher joined the faculty of the Mechanical Engineering Department at Lawrence Techno- logical University in the summer of 2003, after several years of continuous industrial research, product development and manufacturing experience. Fletcher earned his bachelor’s of science degree in chemical engineering from the University of Washington, in Seattle, Wash., a master’s of engineering in manufac- turing systems from Lawrence Technological

Conference Session

Innovative Energy Projects

Collection

2012 ASEE Annual Conference & Exposition

Authors

Craig W. Somerton, Michigan State University

Tagged Divisions

Energy Conversion and Conservation

AC 2012-3381: A COMPUTER SIMULATION PROJECT ON UNDERGROUNDHEAT PUMPSDr. Craig W. Somerton, Michigan State University Page 25.31.1 c American Society for Engineering Education, 2012 A Computer Simulation Project on Underground Heat PumpsIntroductionGeothermal energy may be the most visibly striking of all the alternative energy sources. Theidea of capturing the energy from a geyser or even from the flowing lava of an erupting volcanois very exciting to students. However, the truth is that in the United States there is very limitedaccess to hot geothermal sources. On the other hand, the possibility exists throughout the

Conference Session

Innovative Energy Projects

Collection

2012 ASEE Annual Conference & Exposition

Authors

Faruk Yildiz, Sam Houston State University; Keith L. Coogler, Sam Houston State University; Reg Recayi Pecen, University of Northern Iowa

Tagged Divisions

Energy Conversion and Conservation

Iowa in general. He was recognized as an Advisor of the Year Award nominee among eight other UNI faculty members in 2010-2011 academic year Leadership Award Ceremony. Pecen re- ceived a Milestone Award for outstanding mentoring of graduate students at UNI, and recognition from UNI Graduate College for acknowledging the milestone that has been achieved in successfully chair- ing 10 or more graduate student culminating projects, theses, or dissertations, in 2011 and 2005. He was also nominated for 2004 UNI Book and Supply Outstanding Teaching Award, March 2004, and nominated for 2006, and 2007 Russ Nielson Service Awards, UNI. Pecen is an Engineering Technol- ogy Editor of American Journal of Undergraduate Research

Conference Session

Innovative Energy Projects

Collection

2012 ASEE Annual Conference & Exposition

Authors

Steven R. Walk, Old Dominion University

Tagged Divisions

Energy Conversion and Conservation

and comments on theinitial experiments, and the author‟s observations and recommendations for other instructorsattempting student-led laboratory design. The results can help shorten the laboratorydevelopment learning curve and alert faculty to common early project errors and omissions to beavoided. More significantly, the results show the value of employing student feedback duringthe laboratory development phase.Introduction and Lab ObjectivesA new course in energy conversion systems was designed to meet several developing needs: therenewed or expanding government and private interest in support of alternative energy sourceresearch and applications, and the technology and society studies requirement in the universityGeneral Education program

Conference Session

Energy Conversion and Conservation Division Technical Session 2: Solar Track

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Danielle S. Washington, North Carolina Agricultural and Technical State University; Tony D. Martin Jr.; Evelyn Sowells-Boone, North Carolina Agricultural and Technical State University

Tagged Divisions

Energy Conversion and Conservation

Paper ID #33679ETHR-ENRG Smart Solar Project KitsMs. Danielle S. Washington, North Carolina Agricultural and Technical State University Danielle Washington is a first year graduate student majoring in Information Technology at North Car- olina A&T State University. Danielle obtained her Bachelor of Science in Electronics/Computer Systems Engineering Technology from North Carolina A&T State University as well. She also obtained an As- sociate of Applied Science in Electrical/Electronics Engineering Technology from Guilford Technical Community College. She is a very perseverant, ambitious and analytical

Conference Session

Energy Learning through Simulation and Analysis

Collection

2006 Annual Conference & Exposition

Authors

Timothy Skvarenina, Purdue University

Tagged Divisions

Energy Conversion and Conservation

. Page 11.94.1© American Society for Engineering Education, 2006 A Power Systems Analysis ProjectAbstractThis paper describes a six-week laboratory project in which students analyze a small powersystem. The analysis is done with PowerWorld and is supplemented with MatLab calculations.The students were provided information concerning a small (seven bus, two generator) powersystem. They were required to assemble all of the information into tables, both in actual valuesas well as in per unit on a common base, before beginning the analysis. Since the system wassmall, students could manually calculate Ybus and Zbus values and compare them to thePowerWorld results. Any discrepancies had to be resolved in order to get the

Conference Session

Alternative Energy Laboratory Experiences

Collection

2011 ASEE Annual Conference & Exposition

Authors

Kendrick T. Aung, Lamar University

Tagged Divisions

Energy Conversion and Conservation

renewable energy projectsAbstract In recent years, renewable energy resources have become significant contributorsto energy usage among both developed and developing countries. New textbooks dealingwith alternative and renewable energy resources have been published recently. Manyuniversities have also started offering classes on renewable and alternative energy courseto both undergraduate and graduate students. Simulation and analysis tools on thesealternative energy resources may be useful in conducting these classes. This papercompares some of these simulation tools and evaluates their effectiveness based on theiruse during an elective course at Lamar University. During the course, the students arerequired to complete a design project on

Conference Session

Energy Conversion and Conservation Division Technical Session 2: Solar Track

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Matt Aldeman, Illinois State University; Jin Ho Jo, Illinois State University

Tagged Divisions

Energy Conversion and Conservation

Paper ID #33159A Model Passive Solar Home Student Design ProjectDr. Matt Aldeman, Illinois State University Matthew Aldeman is an Assistant Professor of Technology at Illinois State University, where he teaches in the Renewable Energy and Engineering Technology programs. Matt joined the Technology department faculty after working at the Illinois State University Center for Renewable Energy for over five years. Previously, he worked at General Electric as a wind site manager at the Grand Ridge and Rail Splitter wind projects. Matt’s experience also includes service in the U.S. Navy as a nuclear propulsion officer

Conference Session

Design Experiences in Energy Systems

Collection

2007 Annual Conference & Exposition

Authors

Jennifer Mullin, Virginia Tech; Jinsoo Kim, Korea National University of Education; Vinod Lohani, Virginia Tech; Jenny Lo, Virginia Tech

Tagged Divisions

Energy Conversion and Conservation

AC 2007-1375: SUSTAINABLE ENERGY DESIGN PROJECTS FORENGINEERING FRESHMENJennifer Mullin, Virginia TechJinsoo Kim, Korea National University of Education Dr. Jinsoo Kim is a visiting professor in the Department of Engineering Education at Virginia Tech from July 2006 to July 2007. He is a professor in the Department of Technology Education at Korea National University of Education. He is interested in subject-matter education of Technology, Engineering, and Industry. His permanent e-mail address is jskim@knue.ac.krVinod Lohani, Virginia TechJenny Lo, Virginia Tech Page 12.1336.1© American Society for

Conference Session

Learning about Electric Energy Conversion

Collection

2008 Annual Conference & Exposition

Authors

Ilya Grinberg, Buffalo State College; Carl Spezia, Southern Illinois University-Carbondale; Herbert Hess, University of Idaho

Tagged Divisions

Energy Conversion and Conservation

AC 2008-931: ELECTRIC MACHINES PROJECT ACTIVITIES USING MATHCADE-BOOKIlya Grinberg, Buffalo State CollegeCarl Spezia, Southern Illinois University-CarbondaleHerbert Hess, University of Idaho Page 13.476.1© American Society for Engineering Education, 2008 Electric Machines Project Activities Using a MathCAD® E-BookAbstractRecent software advances have made a wide variety of computer-based learning tools availablefor teaching induction motor theory. These tutorials and visualizations typically target specificfundamental topics, require detailed knowledge of the development software to produce, andprovide a rudimentary connection with other relevant practical topics like

Conference Session

Alternative Energy Source Projects

Collection

2008 Annual Conference & Exposition

Authors

Craig Somerton, Michigan State University

Tagged Divisions

Energy Conversion and Conservation

AC 2008-1054: AN OCEAN ENERGY PROJECT: THE OSCILLATING WATERCOLUMNCraig Somerton, Michigan State University CRAIG W. SOMERTON Craig W. Somerton is an Associate Professor and Associate Chair of the Undergraduate Program for Mechanical Engineering at Michigan State University. He teaches in the area of thermal engineering including thermodynamics, heat transfer, and thermal design. He also teaches the capstone design course for the department. Dr. Somerton has research interests in computer design of thermal systems, transport phenomena in porous media, and application of continuous quality improvement principles to engineering education. He received his B.S. in 1976, his M.S. in 1979

Conference Session

Alternative-energy Laboratory Experiences

Collection

2009 Annual Conference & Exposition

Authors

Laura Genik, Michigan State University; Craig Somerton, Michigan State University

Tagged Divisions

Energy Conversion and Conservation

© American Society for Engineering Education, 2009 Connecting Lab Experiments to a Design ProjectIntroductionA senior level heat transfer laboratory course incorporates a major design and build projectcompetition which accounts for about 1/3 of the course. This project addresses the ABETMechanical Engineering Program Criteria that requires graduates to possess the ability to designin the thermal engineering area. The remaining 2/3 of the laboratory course consists of standardthermal engineering experiments on such topics as thermocouples, convection, and power plants.A unique feature of these standard experiments is the way in which they support the designproject. With the variety of experiments available, the students run

Conference Session

Installation, Integration, and Development

Collection

2017 ASEE Annual Conference & Exposition

Authors

Herbert L. Hess, University of Idaho, Moscow; Saied Hemati, University of Idaho, Moscow

Tagged Topics

Diversity

Tagged Divisions

Energy Conversion and Conservation

— Small photovoltaic energy collection systems are readily available in a wide range offorms, from various do-it-yourself project instructions to plug-and-play demonstrators.Piezoelectric energy collection systems are likewise readily available, though some assemblymay be required. Each can capture energy and store that energy in a battery. Various indicatorsand communications hardware sometimes accompany such photovoltaic systems. This paperdescribes an undergraduate student project that integrates energy collection by means of acombined photovoltaic and piezoelectric system, communicating the process wirelessly to anLCD display. The students learn and apply basic engineering skills, including the important skillof specifying and combining

Conference Session

Energy Conversion and Conservation Division Technical Session 1

Collection

2019 ASEE Annual Conference & Exposition

Authors

Jinmyun Jo, Virginia State University; Xiaoyu Zhang, Old Dominion University; Ali A. Ansari, Virginia State University; Pamela Leigh-Mack, Virginia State University; James Irvin Cooke Jr., Virginia State University

Tagged Topics

Diversity

Tagged Divisions

Energy Conversion and Conservation

control system. Dr. Ansari is a professor of Computer Engineering at Virginia State University.Dr. Pamela Leigh-Mack, Virginia State UniversityDr. James Irvin Cooke Jr., Virginia State University Director of Assessment and Senior Capstone Experiences Program Coordinator of Information Logistics program Department of Technology Virginia State University c American Society for Engineering Education, 2019 Extended Summer Research to Senior Design Project Jinmyun Jo1, Xiaoyu Zhang2, Pamela Leigh-Mack1, Ali Ansari1, James I. Cooke Jr1 Virginia State University, Petersburg, VA 238061 Old Dominion University, Norfolk, VA 235292IntroductionThere

Conference Session

Energy Conversion and Conservation Division Technical Session on Solar

Collection

2018 ASEE Annual Conference & Exposition

Authors

William Hutzel, Purdue University, West Lafayette; Jan T. Lugowski, Purdue University, West Lafayette

Tagged Divisions

Energy Conversion and Conservation

. Achieving these skills requires modernized teaching methodsthat engage students in open-ended assignments where students encounter uncertain data thatforces them to question the results of technical computations. These are some of the key reasonsfor a large energy transformation project underway in an Engineering Technology program. Thetransformation project crosses traditional course boundaries by highlighting similar energyconversion processes that occur in many different disciplines. As one example of the progress sofar, undergraduate students in a thermodynamics course assisted with the installation of an 8 kWsolar photovoltaic array on the roof of a campus building. More importantly, a web-basedgraphic interface was created so that future

Conference Session

Energy Conversion and Conservation Division Technical Session 3

Collection

2019 ASEE Annual Conference & Exposition

Authors

Benjamin Emery Mertz, Rose-Hulman Institute of Technology

Tagged Divisions

Energy Conversion and Conservation

- partment. His teaching focus is in fluid mechanics and thermodynamics but has also taught classes such as numerical methods and introduction to engineering. His interests include student pathways and mo- tivations into engineering and developing lab-based curriculum. He has also developed an interest in non-traditional modes of content delivery including online classes and flipped classrooms and incorporat- ing the entrepreneurial mindset into curriculum. c American Society for Engineering Education, 2019 A First-Year Power Plant Design ProjectAbstractThis evidence-based practice paper discusses the development and refinement of a first-yearengineering design project related to

Conference Session

Trends in Energy Conversion and Conservation

Collection

2006 Annual Conference & Exposition

Authors

Giri Venkataramanan, University of Wisconsin-Madison; Annette Muetze, University of Wisconsin-Madison

Tagged Divisions

Energy Conversion and Conservation

2006-1309: A PROJECT EXPERIENCE IN POWER ENGINEERING DESIGNASPECTSGiri Venkataramanan, University of Wisconsin-Madison Giri Venkataramanan received the B.E. degree in electrical engineering from the Government College of Technology, Coimbatore, India, the M.S. degree from the California Institute of Technology, Pasadena, and the Ph.D. degree from the University of Wisconsin, Madison. After teaching electrical engineering at Montana State University, Bozeman, he returned to University of Wisconsin, Madison, as a faculty member in 1999, where he continues to direct research in various areas of electronic power conversion as an Associate Director of the Wisconsin Electric Machines and

Conference Session

Teaching Courses in Renewable Energy Systems

Collection

2007 Annual Conference & Exposition

Authors

Arthur Haman, University of Detroit Mercy; Robert Ross, University of Detroit Mercy; Mark Schumack, University of Detroit Mercy; Will Wittig, University of Detroit Mercy; David Chew, University of Detroit Mercy; Krysten Dzwigalski, University of Detroit Mercy; Chris Keimig; Meghann Mouyianis, University of Detroit Mercy; Tim Rourke, University of Detroit Mercy

Tagged Divisions

Energy Conversion and Conservation

ProjectIntroductionIn light of the growing recognition that the country must accelerate efforts to develop alternativesto oil, the U.S. government has offered incentives for installation of alternative energy systems.One incentive program administered by the State of Michigan Energy Office called fororganizations to install and demonstrate large scale (10 kW or larger) solar photovoltaic systemsfor purposes of public education. The College of Engineering & Science at the University ofDetroit Mercy applied for and was awarded such a grant in 2005. The project had twoobjectives: first, to demonstrate that photovoltaic solar energy generation can be seamlesslyincorporated into existing architecture; and second, to inform and educate a wide-ranging

Conference Session

Alternative Energy Source Projects

Collection

2008 Annual Conference & Exposition

Authors

Mark Henderson, Arizona State University; Bradley Rogers, Arizona State University

Tagged Divisions

Energy Conversion and Conservation

AC 2008-1306: THE DEVELOPMENT OF AN ECONOMIC MODEL FORBIODIESEL PRODUCTION IN GHANAMark Henderson, Arizona State UniversityBradley Rogers, Arizona State University Page 13.1216.1© American Society for Engineering Education, 2008 The Development of an Economic Model for Biodiesel Production in GhanaAbstractIn this paper, the results of a project in which an interdisciplinary team of honors studentstravelled to Ghana in West Africa for the purpose of developing an economic model of biodieselproduction from energy crops in this region is described. The students included majors inengineering, business and finance, economics, and global studies

Conference Session

Alternative Energy Source Projects

Collection

2008 Annual Conference & Exposition

Authors

Peter Schubert, Packer Engineering

Tagged Divisions

Energy Conversion and Conservation

AC 2008-2758: PLASMA TORCH FOR BIOMASS PYROLYSISPeter Schubert, Packer Engineering Dr. Schubert conducts research into alternate energy, space-based manufacturing, and engineering education at Packer Engineering in Naperville, IL. He is Senior Director, and has served as PI on projects from DOE, NASA and the GSA. He has published 47 technical papers, has 25 US patents, and is an instructor with the Society of Automotive Engineers. Prior experience includes 21 years in automotive electronics with Delphi Corporation, where he was a Technical Fellow. His doctorate in EE from Purdue was sponsored by a GM Fellowship. His MSEE is from U. of Cincinnati on a Whirlpool Fellowship, and his

Conference Session

Alternative Energy Source Projects

Collection

2008 Annual Conference & Exposition

Authors

Esther Ososanya, University of the District of Columbia; Abiose Adebayo, University of the District of Columbia; Jean-Pierre Fodjouo, University of the District of Columbia; Steven Omoijuanfo, University of the District of Columbia; Francis Ayissi, University of the District of Columbia; Tuan Ly, University of the District of Columbia; Kevin Allen, University of the District of Columbia; Mamoun Mohammed Ali, University of the District of Columbia; Gizaw Mulugeta, University of the District of Columbia; Anene Wynn, University of the District of Columbia; Dimitri Ditombi Bamba, University of the District of Columbia; Meraj Shaikh, University of the District of Columbia

Tagged Divisions

Energy Conversion and Conservation

ofthe biogas produced, using a Gas Chromatograph (CG), with Flame Ionization Detector(FID), to separate the methane from carbon dioxide.The biogas produced contains Methane CH4, with very small percentage of Carbondioxide CO2, and some traces of Nitrogen N2, Hydrogen H2, and Hydrogen SulfideH2SO4. The economic viability of this technology, advantages, and the production costcompared to other renewable energy resources are also compared. This technology willbe used to power the heating unit in a Zero Energy Home (ZEH) currently underconstruction.Introduction:The first phase of the Anaerobic digestor design project takes students through theengineering design process, i.e., the conceptual design and analysis, and design feasibilitystudy. The

Conference Session

Energy Efficiency and Capstone Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

Frank Wicks, Union College

Tagged Topics

Diversity

Tagged Divisions

Energy Conversion and Conservation

Paper ID #20574Developing Relevant and Practical Projects for a Senior Capstone ThermalFluids Design CourseDr. Frank Wicks, Union College Frank Wicks is a member of the mechanical engineering department at Union College in Schenectady. He has served all positions including chair of the Energy Conversion and Conservation Division. He is an ASME Fellow and frequent contributor to Mechanical Engineering magazine. He holds a BMarineE from SUNY Maritime College, a MSEE from Union College and PhD from Rensselaer and is a licensed professional engineer. He is the inventor of the Electricity Producing Condensing Furnace and also

Conference Session

Energy Efficiency and Capstone Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

Irina Nicoleta Ciobanescu Husanu, Drexel University; Richard Chiou, Drexel University

Tagged Divisions

Energy Conversion and Conservation

and graduate courses in ET Masters program. Also, she introduced the first experiential activity for Applied Mechanics courses. She is coordinator and advisor for capstone projects for Engineering Technology.Dr. Richard Chiou, Drexel University Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different engineering and technology courses at undergraduate and graduate

Conference Session

Energy Efficiency and Capstone Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

David McDonald P.E., Lake Superior State University

Tagged Divisions

Energy Conversion and Conservation

vehicle market in the world, with more than13 million motor vehicles sold in 2009. China used to be self-sufficient in oil supplies, but isnow estimated to import 40% of its oil consumption.(1) Other industrialized countries such asJapan, Germany, India and Brazil have seen tremendous growth in car sales.The history and projections of oil demand and production support the belief of the theory of peakoil at the present time. Basically, the theory predicts that oil production is at its peak in history,and will soon be below oil demand and possibly create an energy crisis.(1) Economic growth (1)relies heavily on energy supply. Emissions from fossil fuel are the primary source of GreenHouse Gas.(1) The emissions of a

Conference Session

Energy Efficiency and Capstone Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

Hayrettin Bora Karayaka, Western Carolina University; Trevor Parrish, Western Carolina University; Robert D. Adams, Western Carolina University

Tagged Topics

Diversity

Tagged Divisions

Energy Conversion and Conservation

Paper ID #19415A Capstone Project: Assessment of Energy Savings from Retuning of AirHandlersDr. Hayrettin Bora Karayaka, Western Carolina University Bora Karayaka is an Assistant Professor at School of Engineering and Technology, Western Carolina University. He has worked as a Senior Engineer for smart grid and wireless communication industries for over ten years. He is currently responsible for teaching electric power engineering courses in the department. Dr. Karayaka’s research interests include power engineering education, ocean wave energy harvesting, identification, modeling and control for electrical machines

Conference Session

Energy Efficiency and Capstone Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

Jonathan Michael Newton, John Brown University; Harrison Lee Hosteter, John Brown University; Ted Song, John Brown University

Tagged Divisions

Energy Conversion and Conservation

to the current grid and how return-on-investment (ROI)could be analyzed. In particular, as there are not many students who have experienced thedemand charge that utilities charge to commercial customers, JBU has tried to use this system asa learning tool for students to realize the demand charge impact on the electricity cost.From 2014 to 2016, a team of undergraduate engineering students has developed a monitoringsystem that could track the PV generation and the power usage of the building. A primary goal ofthis project was to determine the installed PV system’s contribution to lowering the demandcharge. Since this measurement of contribution could not be determined without the real-timecollected data sets, the student team focused on

Conference Session

Innovative Projects in Energy Education

Collection

2014 ASEE Annual Conference & Exposition

Authors

Dale H. Litwhiler, Penn State - Berks

Tagged Divisions

Energy Conversion and Conservation

Paper ID #9544A Multi-Year Thermoelectric Energy Harvesting Project for First-Year En-gineering and Technology StudentsDr. Dale H. Litwhiler, Penn State - Berks DALE H. LITWHILER is an Associate Professor at Penn State - Berks in Reading, PA. He received his B.S. from Penn State University, M.S. from Syracuse University and Ph.D. from Lehigh University all in electrical engineering. Prior to beginning his academic career in, he worked with IBM Federal Systems and Lockheed Martin Commercial Space Systems as a hardware and software design engineer

Conference Session

Innovative Projects in Energy Education

Collection

2014 ASEE Annual Conference & Exposition

Authors

Salahuddin Qazi, State University of New York, Institute of Tech.; Farhan Qazi

Tagged Divisions

Energy Conversion and Conservation

irrigation systems of automatic irrigation,livestock watering and management, electric fencing, automatic feeders.Health: Refrigeration, very useful in developing countries for the conservation of vaccines andblood, emergency power for clinics.Examples of Practical Standalone SystemsGiven below are two examples of standalone systems which are cost effective to build and canbe easily acquired from charitable organizations on donations. The first standalone system is asolar generator cart which can be assembled easily as a DIY project. The second system is a solarsuitcase, manufactured for humanitarian and disaster area for medical applications. Both systemscost less than $1500 and provide easy access to electrify at remote areas.Solar Generator CartA

Conference Session

Innovative Projects in Energy Education

Collection

2014 ASEE Annual Conference & Exposition

Authors

Vladimir Gurau P.E., Kent State University at Tuscarawas

Tagged Divisions

Energy Conversion and Conservation

identify the optimum process characteristicsincluding material composition, compression level, curing temperature, the mold design andperformed property measurements on the obtained samples, including the measurement of bulkelectrical conductivity using a four-point probe. The samples obtained demonstratecharacteristics that exceed the requirements of the U.S. Department of Energy. This investigationwas performed by students in the Engineering Technology Department at Kent State Universityat Tuscarawas during a capstone design project class – Engineering Technology Project offeredin the spring semester of 2013. The paper presents as well the development of this course.At the recommendation of the ABET accreditation committee, a new capstone design