Conference Session

Innovations in Advanced Fabrication Technologies

Collection

2016 ASEE Annual Conference & Exposition

Authors

R. Radharamanan, Mercer University

Tagged Topics

Diversity

Tagged Divisions

Manufacturing

were assembled to make the prototype of the quadcopter drone.Through this hands-on project, the students were trained in two new and emergingmanufacturing technologies: 3D printing and rapid prototyping as well as drone technology.Some of the difficulties encountered by the student team include assembly errors, sizing issues,and software incompatibility. Flight tests were performed and the errors identified and corrected.The results of the flying quadcopter drone designed, built, and tested are presented anddiscussed.IntroductionThis paper is one of the outcomes of the Mercer Summer Engineering Experience (MeSEE2015), an Academic Training program, in which multidisciplinary student teams were trained inengineering labs and then worked on hand

Conference Session

Technology Integration in the Classroom

Collection

2009 Annual Conference & Exposition

Authors

Hung-da Wan, University of Texas, San Antonio; Venkata Tarun Cherukuri, University of Texas, San Antonio; Saumya Tamma, University of Texas, San Antonio; Kranthi Kumar Tiyyagura, University of Texas, San Antonio

Tagged Divisions

Manufacturing

AC 2009-1492: A WEB-BASED INTERACTIVE ROAD MAP FACILITATINGSELF-LEARNING FROM CAD MODELING TO RAPID PROTOTYPINGHung-da Wan, University of Texas, San Antonio Dr. Hung-da Wan is an Assistant Professor of the Mechanical Engineering Department at U.T.-San Antonio. He is also a faculty members of the Center for Advanced Manufacturing and Lean Systems (CAMLS) and the Interactive Technology Experience Center (iTEC). He received his Ph.D. in Industrial and System Engineering from Virginia Tech. His current research interests include lean manufacturing implementation and evaluation, web-based applications in manufacturing systems, and computer integrated manufacturing.Venkata Tarun Cherukuri, University of

Conference Session

Technology Integration in the Classroom

Collection

2008 Annual Conference & Exposition

Authors

Yuqiu You, Morehead State University; Xiaolong Li, Morehead State University; Gabriel Alungbe, Morehead State University; Sam Mason, Morehead State University

Tagged Divisions

Manufacturing

AC 2008-1947: DEVELOPMENT OF AN ONLINE LABORATORY FORCOMPUTER-INTEGRATED MANUFACTURING COURSESYuqiu You, Morehead State University Dr. Yuqiu You has academic background from both automation engineering and industrial technology. For six years, she taught many courses in the area of manufacturing and automation. She has experience in developing new manufacturing courses and establishing online process control station for virtual laboratory. Presently, she is teaching NC-CNC machining technology, Computer Integrated Manufacturing, and Robotic Interface Engineering, Robotic Applications, and Fundamentals of Computer Technology.Xiaolong Li, Morehead State University Dr. Xiaolong Li has an

Conference Session

Innovations in Advanced Fabrication Technologies

Collection

2016 ASEE Annual Conference & Exposition

Authors

Allen Duong; Akihiko Kumagai, California State University - Sacramento; Adewale George Ogbogho, SMAL; John Tien

Tagged Topics

Diversity

Tagged Divisions

Manufacturing

Paper ID #14775Electrostatic Force-Driven Millimeter-Class Mechanisms for Micro-AssemblyWorkAllen DuongDr. Akihiko Kumagai, California State University - Sacramento Akihiko Kumagai is a Professor of Mechanical Engineering at California State University, Sacramento. His research interests include manufacturing, robotics, mechatronics, and controls. He obtained his B.S. and M.S. in from the University of Florida, and Ph.D. from University of Wisconsin-Milwaukee all in Mechanical Engineering. He worked for Motorola Inc. and United Technologies Automotive as a man- ufacturing engineer for the automation area. He also worked at

Conference Session

Innovations in Advanced Fabrication Technologies

Collection

2016 ASEE Annual Conference & Exposition

Authors

Christopher P. Pung, Grand Valley State University

Tagged Divisions

Manufacturing

Paper ID #14638Science Olympiad: Encouraging Makers in Middle and High SchoolDr. Christopher P. Pung, Grand Valley State University Dr. Pung has interests in experiential learning, design processes and student teams. c American Society for Engineering Education, 2016 Science Olympiad – Encouraging Makers in Middle and HighschoolThe 2016 Science Olympiad has several events that require students to design and build an itemthat meets a certain set of criteria. These are air trajectory (object launch), bridge building, anelectric vehicle, video game design, time keeping, model airplane building and a robotic

Conference Session

Technology Integration in the Classroom

Collection

2009 Annual Conference & Exposition

Authors

Min Jou, National Taiwan Normal University; Yu-Shiang Wu, China Institute of Technology; Han-Wei Zhang, National Taiwan University; Ming-Jenn Wu, National Taiwan Normal University

Tagged Divisions

Manufacturing

AC 2009-2537: DEVELOPMENT OF WEB-BASED ENVIRONMENTS TOSUPPORT SELF-DIRECTED LEARNING OF INDUSTRIAL TECHNOLOGY: ANEXAMPLE FROM MICROTECHNOLOGYMin Jou, National Taiwan Normal University Min Jou received M.S. from University of Missouri in 1992 and Ph.D. from Rensselaer Polytechnic Institute in 1994. Since 2001, he has been with National Taiwan Normal University where he is currently a professor in the Department of Industrial Education with a joint appointment in the Department of Mechatronic Technology. Professor Jou has authored 1 technical book in design, and over 30 papers in diverse areas of computer technology, e-learning technology, engineering education, automation, and material

Conference Session

Incorporating Advanced Technologies into Curriculums

Collection

2010 Annual Conference & Exposition

Authors

Wayne Hung, Texas A&M University; Jorge Leon, Texas A&M University; Luis San Andres, Texas A&M Univeristy

Tagged Divisions

Manufacturing

design and manufacturing of microturbomachinery. Some students study materials, dynamics, or thermal aspects ofturbomachinery, while others explore and develop various micromanufacturing technologies formicroturbine fabrication. The nature of micromachinery requires the development of novelmicromanufacturing technologies for superalloys and other robust engineering materials. Theselected participants study micromilling, electrical discharge micromachining, electrochemicalmicromachining, and vacuum assisted microcasting. They complete a research methodologyworkshop and then apply to their own projects through setting objectives, planning schedule,performing experiments, documenting data, presenting results at the campus-wide poster session

Conference Session

Use of Technology for Education

Collection

2014 ASEE Annual Conference & Exposition

Authors

Zhenhua Wu, Virginia State University; Nasser Ghariban, Virginia State University

Tagged Divisions

Manufacturing

Paper ID #8607Design of Laboratory Apparatus for Temperature Prediction in Turning Pro-cessDr. Zhenhua Wu, Virginia State University Dr. Zhenhua Wu, is currently an Assistant Professor at Virginia State University. He received his PhD in Mechanical Engineering from Texas A&M University. His current research interests focus on control and diagnose complex systems, sustainable manufacturing, and nano manufacturing.Dr. Nasser Ghariban, Virginia State University Page 24.371.1 c American

Conference Session

Use of Technology for Education

Collection

2014 ASEE Annual Conference & Exposition

Authors

Derrick Robinson, Virginia State University; Pallant Ramsundar, Virginia State University; Chandan B Samantaray, Virginia State University

Tagged Divisions

Manufacturing

Development.Dr. Chandan B Samantaray, Virginia State University Dr. Chandan B. Samantaray, has been working as Assistant Professor of Physics in the Department of Chemistry & Physics, Virginia State University. He has almost fifteen years of active research in the fields of ceramic thin films/coating, semiconductor devices & process, and modeling. His interests include advanced manufacturing, nanosensors, and finite element simulation. Page 24.185.1 c American Society for Engineering Education, 2014 Analyzing Porosity in Thermal Barrier Coatings: Edge Detection

Conference Session

Multidisciplinary and Project-based Experiences in Manufacturing

Collection

2009 Annual Conference & Exposition

Authors

David Culler, Oregon Institute of Technology; Noah Anderson, Oregon Institute of Technology; Stanley Ames, Oregon Institute of Technology

Tagged Divisions

Manufacturing

AC 2009-2230: DESIGN AND CONSTRUCTION OF A RAPID PROTOTYPINGMACHINE: A BREAKDOWN OF THE MACHINE SUBSYSTEMS USED TOLEARN MULTIDISCIPLINARY ENGINEERING SKILLSDavid Culler, Oregon Institute of Technology Dr. Culler has more than 20 years experience in CAM systems and is currently an Associate Professor at the Oregon Institute of Technology in Klamath Falls, OR. He has worked with Sandia National Laboratories, the Army Research Organization and most recently spent 4 years teaching at the Costa Rica Institute of Technology. He has published some of his work in the RCIM journal and at the 2004 Frontiers in Engineering Education Conference in Savannah GA.Noah Anderson, Oregon Institute of Technology Noah

Conference Session

Design Education II

Collection

2011 ASEE Annual Conference & Exposition

Authors

Sabah Razouk Abro, Laurence Tecnological University, Department of Engineering Tecnology; Jerry Cuper, Lawrence Technological University

Tagged Divisions

Manufacturing

has many publications related to education and statistics. He is a member of several professional organizations like the American Mathematical Society. Sabah has participated in 2010 in AESS conference with a paper jointly with Ken CookJerry Cuper, Lawrence Technological University Jerry Cuper is a professor and advisor in the Department of Engineering Technology in the College of Engineering. His education includes graduate and undergraduate degrees, and completion of a technol- ogy apprenticeship program. Mr. Cuper’s career has spanned a wealth of experience in the machine shop, on the drawing board, in construction, and many years in engineering design, testing and development, management, and planning. Most of

Conference Session

Incorporating Innovative Technologies into the Curriculum

Collection

2011 ASEE Annual Conference & Exposition

Authors

Arif Sirinterlikci, Robert Morris University; Tony Lee Kerzmann, Robert Morris University

Tagged Divisions

Manufacturing

. These periodicals and other SAE resources keep students updated in their field. 11. Have an ability to use techniques, skills, and modern engineering tools necessary for engineering practice. CAD/CAM/CAE, CNC or manual machine operation, welding, plasma cutting, and various other current technologies are utilized and practiced by the team.In addition to the basic outcomes listed above, the team members get a good dose of practicalmanufacturing education even though they may be enrolled in a different program.Manufacturing engineering students also improve their backgrounds. Material science andengineering, manufacturing processes and assembly operations, tool engineering, planning,strategy, and

Conference Session

Manufacturing Education for Emerging Technologies and Competitiveness

Collection

2012 ASEE Annual Conference & Exposition

Authors

Yalcin M. Ertekin, Drexel University; Richard Chiou, Drexel University

Tagged Divisions

Manufacturing

AC 2012-4756: DEVELOPMENT OF A WEB-BASED RAPID PROTOTYP-ING AND PRODUCT DESIGN COURSEDr. Yalcin M. Ertekin, Drexel University Yalcin Ertekin received his B.S. degree in mechanical engineering from Istanbul Technical University. He attended the Business School of Istanbul University and received a M.S. degree in production man- agement. After working for Chrysler Truck Manufacturing Company in Turkey as a Project Engineer, he received dual M.S. degrees in engineering management and mechanical engineering from Missouri University of Science and Technology (MS&T), formerly the University of Missouri, Rolla. He worked for Toyota Motor Corporation as a Quality Assurance Engineer for two years and lived in Toyota City

Conference Session

Emerging Technologies in Manufacturing Education II

Collection

2007 Annual Conference & Exposition

Authors

Shirish Sreedharan, University of Missouri; Frank Liou, University of Missouri

Tagged Divisions

Manufacturing

AC 2007-273: CAN LEAN MANUFACTURING BE APPLIED TO UNIVERSITYLABORATORIES?Shirish Sreedharan , University of MissouriFrank Liou, University of Missouri Frank Liou is a Professor in the Mechanical Engineering Department at the University of Missouri-Rolla (UMR). He currently serves as the Director of the Manufacturing Engineering Program at UMR. His teaching and research interests include CAD/CAM, rapid prototyping, and rapid manufacturing. He has published over 100 technical papers and has research grants and contracts over $8M. Page 12.340.1© American Society for Engineering Education, 2007 Can

Conference Session

Emerging Technologies in Manufacturing Education - I

Collection

2007 Annual Conference & Exposition

Authors

Zbigniew Czajkiewicz, Robert Morris University; Arif Sirinterlikci, Robert Morris University; Ozden Uslu, Robert Morris University

Tagged Divisions

Manufacturing

fields of Mechanical, Industrial, and Manufacturing Engineering.Ozden Uslu, Robert Morris University Graduate Student in Engineering Management program Page 12.1218.1© American Society for Engineering Education, 2007 Rapid Manufacturing – The Future of Production Systems ABSTRACTRapid Prototyping is a technology that converts three-dimensional computer models intophysical parts typically by building layers upon layer of material. This technology has beenserving designers for almost 20 years in support of demonstrating, testing, and confirmingtheir designs early and

Conference Session

Instructional technologies - Simulations, VR, Remote Education

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Tzu-Liang Bill Tseng, University of Texas at El Paso; Md Fashiar Rahman, University of Texas at El Paso; Richard Chiou, Drexel University; Ivan Arturo Renteria-Marquez, University of Texas at El Paso; Aditya Akundi, University of Texas, Rio Grande Valley; Amit J Lopes, University of Texas at El Paso; Jeevarathinam Senthilkumar

Tagged Divisions

Manufacturing

Chiou, Drexel University Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different engineering and technology courses at undergraduate and graduate levels. His tremendous re- search experience in manufacturing includes environmentally conscious manufacturing, Internet based robotics, and Web based quality. In the past years, he has been involved in sustainable

Conference Session

Emerging Technologies in Manufacturing Education II

Collection

2007 Annual Conference & Exposition

Authors

David Wells, North Dakota State University

Tagged Divisions

Manufacturing

AC 2007-99: MICRO-MANUFACTURING IN THE CLASSROOM ANDLABORATORYDavid Wells, North Dakota State University David L. Wells has been Professor of Industrial and Manufacturing Engineering at North Dakota State University since January 2000. He teaches undergraduate and graduate courses in process engineering and production engineering systems design for conventional manufacturing, electronics assembly and micro-manufacturing. His active research lies in micro-assembly, micro-machining, PCB process engineering, printed electronics, applications of RFID technologies, quantitative manufacturing management and manufacturing engineering pedagogy. He is active in SME, ASEE, SMTA, IEEE and ABET. Prior

Conference Session

Manufacturing Education for Emerging Technologies and Competitiveness

Collection

2012 ASEE Annual Conference & Exposition

Authors

Hung-da Wan, University of Texas, San Antonio; Firasath Ahmed Syed, University of Texas, San Antonio

Tagged Divisions

Manufacturing

and instructors to use the technology properly. With the experience ofmanaging two different RP machines (i.e. fused deposition modeling and 3D printing), theauthors have documented a collection of failures of student projects involving RP. The causes offailure have been categorized into Dimensional, Functional, Operational, and Economical.Finally, a guideline is provided for preparation of using RP in design or manufacturing courses inhopes of helping the readers create a more enjoyable and effective learning environment.IntroductionIn recent years, an increasing number of engineering educators have adopted Rapid Prototyping(RP) as a tool to enhance engineering curricula. Commonly known as 3D Printers, RP machinesare capable of making three

Conference Session

Emerging Technologies in Manufacturing Education II

Collection

2007 Annual Conference & Exposition

Authors

jack danziger, Rochester Institute of Technology; David Street, Rochester Institute of Technology; William Leonard, Rochester Institute of Technology

Tagged Divisions

Manufacturing

innovation and commercialization, and rapid product developmentDavid Street, Rochester Institute of Technology David M. Street received BS degree in Mechanical Engineering Technology (MET) from Rochester Institute of Technology. He is graduate student at RIT in the Manufacturing and Mechanical Systems Integration department. His research interest includes rapid prototyping, product innovation & commercialization, and rapid product development.William Leonard, Rochester Institute of Technology is the program chair has been on faculty in the MET Department at Rochester Institute of Technology since 1998. Bill has a BSME from the College of Engineering at RIT and an M.S. at RIT. He has

Conference Session

Emerging Technologies in Manufacturing Education II

Collection

2007 Annual Conference & Exposition

Authors

Ertunga Ozelkan, University of North Carolina-Charlotte; Agnes Galambosi, University of North Carolina-Charlotte

Tagged Divisions

Manufacturing

AC 2007-2822: LAMPSHADE GAME FOR TEACHING LEAN MANUFACTURINGErtunga Ozelkan, University of North Carolina-Charlotte Ertunga C. Ozelkan, Ph.D., is an Assistant Professor of Engineering Management and the Associate Director of the Center for Lean Logistics and Engineered Systems at the University of North Carolina at Charlotte. Before joining academia, Dr. Ozelkan worked for i2 Technologies, a leading supply chain software vendor in the capacity of a Customer Service and Global Curriculum Manager and a Consultant. He also worked as a project manager and a consultant for Tefen Consulting in the area of productivity improvement for Hitech firms. Dr. Ozelkan holds a Ph.D. degree in Systems and

Conference Session

Instructional technologies - Simulations, VR, Remote Education

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Irina Nicoleta Ciobanescu Husanu, Drexel University; Kevin Frank, Drexel University; Ayanna Elise Gardner, Drexel University; Richard Chiou, Drexel University

Tagged Divisions

Manufacturing

Paper ID #31659Learning Module of PEM Fuel CellsDr. Irina Nicoleta Ciobanescu Husanu, Drexel University (Eng. & Eng. Tech.) Irina Ciobanescu Husanu, Ph. D. is Assistant Clinical Professor with Drexel University, Engineer- ing Technology program. Her area of expertise is in thermo-fluid sciences with applications in micro- combustion, fuel cells, green fuels and plasma assisted combustion. She has prior industrial experience in aerospace engineering that encompasses both theoretical analysis and experimental investigations such as designing and testing of propulsion systems including design and development of pilot

Conference Session

Emerging Technologies in Manufacturing Education - I

Collection

2007 Annual Conference & Exposition

Authors

Robert Creese, West Virginia University

Tagged Divisions

Manufacturing

part is approximately $ 100,000 with the educational discount andhas a build volume of 250mm x 200mm x 200mm. The equipment for large production molds isapproximately $ 1.5 million and is used in several automotive and defense research laboratories.Conclusions Rapid manufacturing has advanced the metal casting process to new levels and has Page 12.1217.6greatly reduced the tooling and labor requirements. Rapid manufacturing is revitalizing themetal casting industry in the developed nations by making it more competitive on a cost basisand more appealing to engineers of the future. The new technology will reduce many of theproblems of the

Conference Session

Emerging Technologies in Manufacturing Education - I

Collection

2007 Annual Conference & Exposition

Authors

Ben Zoghi, Texas A&M University; Ryan Beasley; Wei Zhan, Texas A&M University

Tagged Divisions

Manufacturing

AC 2007-971: A THOROUGH HANDS-ON PROCESS TO IMPLEMENT A RFIDSYSTEMBen Zoghi, Texas A&M University Dr. Ben Zoghi is currently a Professor and Director of RFID/Sensor Lab in the Engineering Technology and Industrial Distribution Department at Texas A&M University. He has served the department as Industrial Distribution Program Coordinator, Executive Director of Thomas and Joan Read Center and Associate Department Head for Research since he joined Texas A&M in 1987. His research activities include RFID/Sensors and engineering leadership development. Dr. Zoghi is a senior member fo IEEE, meber of ASEE, TAP, TBP. He has over 100 educational and research publications.Ryan Beasely, TAMU

Conference Session

Manufacturing Education for Emerging Technologies and Competitiveness

Collection

2012 ASEE Annual Conference & Exposition

Authors

Mysore Narayanan, Miami University

Tagged Divisions

Manufacturing

AC 2012-4952: ASSESSMENT OF A WELL-DESIGNED MECHANICALVIBRATIONS COURSEDr. Mysore Narayanan, Miami University Mysore Narayanan obtained his Ph.D. from the University of Liverpool, England in the area of electrical and electronic engineering. He joined Miami University in 1980 and teaches a wide variety of electrical, electronic, and mechanical engineering courses. He has been invited to contribute articles to several ency- clopedias and has published and presented dozens of papers at local, regional, national, and international conferences. He has also designed, developed, organized, and chaired several conferences for Miami University and conference sessions for a variety of organizations. He is a Senior Member of

Conference Session

Instructional technologies - Simulations, VR, Remote Education

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Sheng-Jen Hsieh, Texas A&M University

Tagged Divisions

Manufacturing

Paper ID #29830Remotely Accessible 3D Printer for Teaching CNC Programming: LessonsLearnedDr. Sheng-Jen ”Tony” Hsieh, Texas A&M University Dr. Sheng-Jen (”Tony”) Hsieh is a Professor in the College of Engineering at Texas A&M University. He holds a joint appointment with the Department of Engineering Technology and the Department of Mechanical Engineering. His research interests include engineering education, cognitive task analysis, automation, robotics and control, intelligent manufacturing system design, and micro/nano manufactur- ing. He is also the Director of the Rockwell Automation laboratory at Texas A&M

Conference Session

Incorporating Innovative Technologies into the Curriculum

Collection

2011 ASEE Annual Conference & Exposition

Authors

Wayne P. Hung, Texas A&M University

Tagged Divisions

Manufacturing

AC 2011-1492: CLICKER CLICKS ITWayne P Hung, Texas A&M University Dr. Hung is an Associate Professor at Texas A&M University and has a joint appointment with Depart- ment of Engineering Technology & Industrial Distribution and Department of Mechanical Engineering. He is an active member of ASEE, SME, HTEC and enjoys teaching and researching in the field of ad- vanced materials, micro manufacturing, and medical manufacturing. Page 22.330.1 c American Society for Engineering Education, 2011 Clicker Clicks It!AbstractManufacturing requires

Conference Session

Instructional technologies - Simulations, VR, Remote Education

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Yi-hsiang Isaac Chang, Illinois State University; Kevin L. Devine, Illinois State University; Gunnar Keith Klitzing, Illinois State University

Tagged Divisions

Manufacturing

is in product innovation, process improvement, and technology diffusion.Dr. Kevin L Devine, Illinois State University Kevin is the Program Coordinator for the Engineering Technology major at Illinois State University. His primary teaching assignments are in engineering graphics, industrial robotics, and CNC program- ming/machining.Mr. Gunnar Keith Klitzing, Illinois State University c American Society for Engineering Education, 2020 Exploring the VR-Based Programming-by-demonstration Approach to Teach Industrial Robotics in Manufacturing EducationAbstract Traditionally industrial robots have been programmed on-line using a teach pendant oroff-line using programming

Conference Session

Incorporating Innovative Technologies into the Curriculum

Collection

2011 ASEE Annual Conference & Exposition

Authors

Michael J. Kozak, University of Dayton

Tagged Divisions

Manufacturing

AC 2011-1741: THE CREATION AND ASSESSMENT OF A GAGE RE-PEATABILITY AND REPRODUCIBILITY STUDY EXERCISE IN A METROL-OGY CLASSMichael J. Kozak, University of Dayton Page 22.1435.1 c American Society for Engineering Education, 2011 The Creation and Assessment of a Gage Repeatability and Reproducibility Study Exercise in a Metrology ClassAbstractA gage repeatability and reproducibility (R&R) study was implemented in a metrology class inan engineering technology program. An R&R can be a relatively confusing exercise for astudent that is new to the concept of gage analysis. This is especially true for

Conference Session

Emerging Technologies in Manufacturing Education - I

Collection

2007 Annual Conference & Exposition

Authors

Leslie Pagliari, East Carolina University; David Batts, East Carolina University; Lawrence Behr, LBA Group; Kenneth Dingle, Allvac

Tagged Divisions

Manufacturing

Environmental Health andSafety had the second highest response rate at 23%. The respondents that listed other could enterin their program and the two responses stated “Engineering with a minor in Occupational Safety”and “Risk Control”. Page 12.1435.10Table 1Type of Safety and Health Degree Response f CountOccupational Safety 47.0% 14Environmental Health 10.0% 3Occupational and 7.0% 7Environmental Health andSafetyFire Protection 3.0% 1Safety Studies (Safety 3.0% 1Sciences)Industrial Technology 7.0

Conference Session

Manufacturing Division Technical Session 7

Collection

2019 ASEE Annual Conference & Exposition

Authors

Irina Nicoleta Ciobanescu Husanu, Drexel University; M. Eric Carr, Drexel University

Tagged Divisions

Manufacturing

Paper ID #26691Senior Capstone Project in Green Technologies: Study of ElectromagneticBraking as Prospective Enhancement of Friction-based Automotive BrakingSystemDr. Irina Nicoleta Ciobanescu Husanu, Drexel University Irina Ciobanescu Husanu, Ph. D. is Assistant Clinical Professor with Drexel University, Engineer- ing Technology program. Her area of expertise is in thermo-fluid sciences with applications in micro- combustion, fuel cells, green fuels and plasma assisted combustion. She has prior industrial experience in aerospace engineering that encompasses both theoretical analysis and experimental investigations such