Conference Session

Instrumentation Division Technical Session 1

Collection

2015 ASEE Annual Conference & Exposition

Authors

Rizwanul Neyon, Purdue University Calumet (College of Technology); Nirjhar Das Sharma, Purdue University Calumet; Priom Chakraborty, Purdue university Calumet; Akram Hossain, Purdue University Calumet (College of Technology)

Tagged Topics

Diversity

Tagged Divisions

Instrumentation

Society for 15 years at various capacities. He served as chair ofManufacturing Systems Development Applications Department (MSDAD) of IEEE/IAS. Currently, he isserving a two-year term as the chair of the Instrumentation of ASEE (American Society of EngineeringEducation). He authored over 29 refereed journal and conference publications. In 2009 he as PI receivedNSF-CCLI grant entitled A Mechatronics Curriculum and Packaging Automation Laboratory Facility. In2010 he as Co-PI received NSF-ATE grant entitled Meeting Workforce Needs for Mechatronics Tech-nicians. From 2003 through 2006, he was involved with Argonne National Laboratory, Argonne, IL indeveloping direct computer control for hydrogen powered automotives. He is also involved in

Conference Session

Design Throughout the Mechanical Engineering Curriculum

Collection

2015 ASEE Annual Conference & Exposition

Authors

Aaron Lalley P.E., South Dakota School of Mines and Technology; Mark David Bedillion, South Dakota School of Mines and Technology; Michael Langerman, South Dakota School of Mines and Technology; Umesh A. Korde, South Dakota School of Mines and Technology

Tagged Divisions

Mechanical Engineering

degree in 2001, and the PhD degree in 2005, all from the mechanical engineering department of Carnegie Mellon University. After a seven year career in the hard disk drive industry, Dr. Bedillion joined the faculty of the South Dakota School of Mines and Technology in Spring 2011. Dr. Bedillion’s research interests include distributed manipulation, control applications in data storage, control applications in manufacturing, and STEM education.Dr. Michael Langerman, South Dakota School of Mines and Technology Dr. Michael Langerman is professor and Head of the Mechanical Engineering Department and Co- Director of the Computational Mechanics Laboratory at the South Dakota School of Mines and Tech- nology (SDSM&T

Conference Session

NSF Grantees’ Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Narayan Bhattarai, North Carolina A&T State University; Courtney Lambeth, North Carolina A&T State University; Dhananjay Kumar, North Carolina A&T State University; Cindy Waters, North Carolina A&T State University; Devdas M. Pai, North Carolina A&T State University; Matthew B. A. McCullough, North Carolina A&T State University; Caroline S. Booth, North Carolina A & T State University

Tagged Topics

NSF Grantees Poster Session

listed below: I. To develop biomedical nanotechnology modules in existing bioengineering courses. II. To develop a team-based, biomedical nanotechnology course with a significant hands-on laboratory component. III. To develop a semester long research experience course related to biomedical nanotechnology for a limited number of undergraduates. IV. To develop an interdisciplinary nanoengineering certificate program (INCP).ASSESSMENT METHODS & IRB APPROVALEach phase of the undergraduate student’s learning experiences were assessed using multiplemeasurements. Content learning for Objective I, the learning modules in BMEN220 andBMEN310, was assessed using an instructor designed content assessment and studentsatisfaction was assessed

Conference Session

Faculty Development II

Collection

2015 ASEE Annual Conference & Exposition

Authors

Grace Panther, Oregon State University; Devlin Montfort, Oregon State University; Shane A. Brown P.E., Oregon State University

Tagged Divisions

Educational Research and Methods

). 2008. Page 26.980.93. Hall GE, Dirksen DJ, George AA. Measuring implementation in schools: Levels of use. Southwest Educational Development Laboratory; 2006.4. Borrego M, Froyd JE, Hall TS. Diffusion of Engineering Education Innovations: A Survey of Awareness and Adoption Rates in U.S. Engineering Departments. Journal of Engineering Education 2010;99(3):185- 207.5. Henderson C, Dancy MH. Increasing the impact and diffusion of STEM education innovations. 2011.6. George AA, Hall GE, Stiegelbauer SM. Measuring implementation in schools: The stages of concern questionnaire. Southwest Educational Development

Conference Session

NSF Grantees’ Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Alexander Vincent Struck Jannini, Rowan University; C. Stewart Slater, Rowan University

Tagged Topics

NSF Grantees Poster Session

Pharmaceutical Manufacturing into the Chemical Engineering CurriculumAbstractOver the past several years we have explored ways to incorporate concepts of pharmaceuticalengineering within the chemical engineering curriculum. Our initial efforts in this area have beendirected towards the integration of these concepts in freshman and sophomore level courses. Thisprovides an experience that reinforces core educational objectives and increases student interestin the pharmaceutical field. This paper is a continuation of our educational methodsdevelopment, and will describe several pharmaceutical and consumer product educationalmodules. These modules include both laboratory and course-related activities for both lower andupper-level

Conference Session

Manufacturing Materials and Processes

Collection

2015 ASEE Annual Conference & Exposition

Authors

Yalcin Ertekin, Drexel University; Richard Chiou, Drexel University

Tagged Divisions

Manufacturing

time. Contemporary manufacturers have the option of selecting optimumtechnologies or processes to suit their manufacturing environment. Fast paced transformations inEngineering Technology (ET) field require new and enhanced learning and teaching strategies inengineering technology curriculum. More than ever, the educational advance is leaning towardsmeeting the demands of industrial world. Engineering Technology curricula needs to adapt tonovel technologies and modern tools by enabling students to acquire meaningful and relevantpractices. Laboratory activities should be incorporated into dry-lectured courses, being vital toET programs, since they are ultimately enhancing the understanding process, leading towardsdeveloping experience-led

Conference Session

Circuits and Systems Education 3

Collection

2015 ASEE Annual Conference & Exposition

Authors

Nesreen Alsbou, Ohio Northern University; Khalid S. Al-Olimat P.E., Ohio Northern University; Vladimir A Labay, Gonzaga University; Heath Joseph LeBlanc, Ohio Northern University

Tagged Divisions

Electrical and Computer

fourcredit hour semester course that consists of three 50-minute lectures and a 2-hour associatedlaboratory each week, and is considered one of the core courses in the Electrical Engineeringcurriculum. The course covers electric circuit analysis techniques in addition to certain aspects ofcircuit design. The objectives of the course include circuit analysis, design, simulation, and datagathering and analysis in the laboratory. The circuit analysis portion emphasizes proficiency inthe analysis of DC and AC circuits, which include circuits theorems and analysis techniques,operational amplifiers, first-order transient analysis, ideal transformers, and balanced three-phasecircuits. The design objectives in the course include design and construction of

Conference Session

Topics in Computing and Information Technologies II

Collection

2015 ASEE Annual Conference & Exposition

Authors

Regina Melo Silveira P.E., Universidade de São Paulo; Itana Stiubiener Mrs, Universidade Federal do ABC - UFABC; Wilson V Ruggiero, LARC-EPUSP

Tagged Divisions

Computing & Information Technology

Paper ID #11364Is a video used as a didactic content effective in the learning process?Dr. Regina Melo Silveira P.E., Universidade de S˜ao Paulo Regina Melo Silveira is Assistant Professor and researcher at the Department of Computer and Digital Systems Engineering (PCS) at Escola Polit´ecnica - Universidade de S˜ao Paulo (EPUSP), since February 2002. Associated to LARC (Laboratory of Computer Architecture and Networks) she works in the Net- working area since 1995. She participated in relevants Projects like Poli-Virtual, Multimedia on Demand System, RMAV-SP (S˜ao Paulo Internet 2), Tidia-Ae, KyaTera, and Interactive TV

Conference Session

ECCD Innovative Teaching Methods & Outreach

Collection

2015 ASEE Annual Conference & Exposition

Authors

Lynn Albers, North Carolina State University

Tagged Divisions

Energy Conversion and Conservation

during the execution of each program that will prove helpfulwhen implementing the Model.Need to promote ST(EE)2MThe Wind Powering America initiative has set a goal to power 20% of the country’s energy fromwind by the year 2030 6. In order to accomplish this goal, a workforce needs to be developedwith the necessary skillsets. The National Renewable Energy Laboratory (NREL) workforcedevelopment analyses studies show that, “The greatest near-term solar and wind workforce needsinclude technicians and tradesmen with hands-on solar- and wind-specific experience,experienced electrical, mechanical and solar engineers, and project managers.” 13 And in orderto create this workforce a “Standardized education and training at all levels – primary

Conference Session

International Division Technical Session 5

Collection

2015 ASEE Annual Conference & Exposition

Authors

Cheryl Matherly, The University of Tulsa; Sarah R. Phillips, Rice University ; Cody A. Chapman, University of Tulsa

Tagged Topics

Diversity

Tagged Divisions

International

through which twelve freshmanand sophomore physics and engineering students from U.S. universities complete researchinternships in the multidisciplinary field of nanoscience and nanoengineering in leadingJapanese laboratories.34 The program first received five years of funding in 2006 and wasselected for a five-year renewal in 2010 with funding confirmed through 2015. Within thisPIRE grant, the research projects conducted by NanoJapan students are concerned with variousaspects of nanoscience and nanoengineering, ranging from synthesis of nanomaterials throughnanodevice fabrication to a variety of electrical, magnetic, and optical characterizationmeasurements.35NanoJapan recruits high-potential first and second year physics and engineering

Conference Session

NSF Grantees’ Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Nathan W. Klingbeil, Wright State University; Anthony Bourne, Wright State University

Tagged Topics

NSF Grantees Poster Session

attrition inengineering programs across the country. Assuch, there is a drastic need for a proven modelwhich eliminates the first-year mathematicsbottleneck in the traditional engineeringcurriculum, yet can be readily adopted byengineering programs across the country. Such Figure 1. The Derivative Labis the focus of this work. Page 26.1580.2The Wright State model begins with the development of a novel first-year engineering mathcourse, EGR 101 Introductory Mathematics for Engineering Applications. Taught byengineering faculty, the course includes lecture, laboratory and recitation

Conference Session

Interest and Movitation: Formulating New Paradigms to Increase URM Participation in Engineering

Collection

2015 ASEE Annual Conference & Exposition

Authors

Daniel Christe, Drexel University; Arpit Shah, Drexel University; Jay J. Bhatt, Drexel University; Marisol Rodriguez Mergenthal, Drexel University; Linda Powell, Community College of Philadelphia; Antonios Kontsos, Drexel University

Tagged Topics

Diversity

Tagged Divisions

Minorities in Engineering

-8) at Los Alamos National Laboratory in New Mexico.Arpit Shah, Drexel University, School of Biomedical Engineering, Science, and Health Systems. Arpit Shah is a Ph.D candidate in Drexel’s School of Biomedical Engineering , Science, and Health Systems.Mr. Jay J. Bhatt, Drexel University (Eng. & Eng. Tech.) Jay Bhatt is responsible for building library collections in engineering subject areas, outreach to fac- ulty and students, and teaching information and research skills to faculty and students in Engineering, Biomedical Engineering, and related subject areas. He provides individual and small group consultations to students, instructional sessions to specific classes, online research support in both face to face

Conference Session

NSF Grantees’ Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Sheng-Jen Hsieh, Texas A&M University

Tagged Topics

NSF Grantees Poster Session

Automation laboratory at Texas A&M University, a state-of-the-art facility for education and research in the areas of automation, control, and automated system integration. Page 26.1332.1 c American Society for Engineering Education, 2015 Research Experiences for Undergraduates in Mechatronics, Robotics, and Automated System DesignAbstractIndustrial automation makes modern manufacturing possible, and mechatronics and robotics arethe building blocks for industrial automation. Even in challenging economic times, U.S.manufacturers are still looking to hire highly skilled

Conference Session

Electrical and Computer Engineering Curriculum Design and Evaluation

Collection

2015 ASEE Annual Conference & Exposition

Authors

Kenneth A Connor, Rensselaer Polytechnic Institute; Yacob Astatke, Morgan State University; Charles J. Kim, Howard University; Abdelnasser A Eldek, Jackson State University; Hamid R. Majlesein, Southern University and A&M College; Petru Andrei, Florida A&M University & Florida State University; John Okyere Attia P.E., Prairie View A&M University; Kathy Ann Gullie PhD, University at Albany/SUNY; Corey A Graves, North Carolina A&T State University; Ali Reza Osareh, NC A&T State University

Tagged Topics

Diversity

Tagged Divisions

Electrical and Computer

engineering grant supporting Historically Black University and Col- leges; ”Building Learning Communities to Improve Student Achievement: Albany City School District” , and ”Educational Leadership Program Enhancement Project at Syracuse University” Teacher Leadership Quality Program. She is also the PI on both ”Syracuse City School District Title II B Mathematics and Science Partnership: Science Project and Mathematics MSP Grant initiatives.Dr. Corey A Graves, North Carolina A&T State University Corey A. Graves is an associate professor and the director of the Auto Mobile Pervasive and Embedded Design 9AMPED) Laboratory in the Electrical and Computer Engineering Department at North Carolina A&T State University

Conference Session

Curriculum and New Course Development in ET

Collection

2015 ASEE Annual Conference & Exposition

Authors

Sunil Mehendale, Michigan Technological University; John L. Irwin, Michigan Technological University; Robert A. Marlor, Northern Michigan University

Tagged Divisions

Engineering Technology

indications that technologists and engineers are active learners and therefore hands-onexperiences are an important part of their education [11]. In order to facilitate hands-on learningin the MET course of dynamics, we propose to design and fabricate several manipulativephysical models of selected linkages or mechanisms that students frequently encounter in theirstudy of dynamics and will also encounter regularly in the real world. Sirinterlikci and Kerzmann[22] have described an educational initiative involving developing laboratory kits that wouldallow the mechanical engineering courses ENGR 1010 - Introduction to Engineering and ENGR2160 - Engineering Graphics to utilize the same kits for numerous laboratory sessions.Simulations and/or

Conference Session

Chemical Engineering Division Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Christi L Patton Luks, Missouri University of Science & Technology; Laura P Ford, University of Tulsa

Tagged Divisions

Chemical Engineering

student teams work out theirinterpersonal problems only to then be faced with hours of grading lengthy reports. And,although the students only have to complete the work once, for faculty, the cycle repeatsannually.Two years ago, we attended a presentation on gamification in a laboratory course 1. Although theplan used in that paper did not suit us, the idea of adding an element of fun and competition tothe Unit Ops Lab had a certain appeal. We brainstormed ways to incorporate the game conceptand fix some of the small annoyances of teaching the lab courses. The small gamificationaddition was dubbed “Bragging Points”. The idea would be to recognize the students for doingsomething right (that they probably should have been doing anyway) and let them

Conference Session

NSF Grantees’ Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Mukasa E. Ssemakula, Wayne State University; Gene Yeau-Jian Liao, Wayne State University; Shlomo S. Sawilowsky, Wayne State University

Tagged Topics

NSF Grantees Poster Session

New Approach to Integrating Design and Manufacturing into Engineering Curricula." Proc.,1995 ASEE Annual Conference & Exposition, June 25-28, 1995; Anaheim, CA. pp. 2262 - 2269.5. DeMeter, E. C., Jorgensen, J. E. and Rullan, A.: "The Learning Factory of The Manufacturing Engineering Education Program." Proceedings, SME International Conference on Manufacturing Education for the 21st Century, San Diego, CA6. Ssemakula, M. E. and Liao, G. Y.: ‘Implementing The Learning Factory Model In A Laboratory Setting’ Page 26.252.8 IMECE 2004, Intl Mech Engineering Congress & Exposition, Nov. 13-19, 2004

Conference Session

Concurrent Paper Tracks - Session II

Collection

2015 ASEE International Forum

Authors

Ronald J Hugo, University of Calgary; Bob Brennan P.Eng., University of Calgary; Jian Zhang; Xiaodong Niu, Shantou University

Tagged Topics

Diversity, International Forum

exchange where students enrol and study for either one semester or an academic year at an institution located in another country. 2. International project refers to a senior-year capstone design project with the involvement of another (host) country, often including sponsors and co-workers from the host country. 3. International work placement involves work at a foreign firm for a duration that ranges anywhere from 4 months to an entire year. 4. International field trip is usually a short-duration visit (one to two weeks) to one or more foreign countries, often including visits to other universities, research laboratories, and industrial establishments (factories, plants, etc.). 5

Conference Session

Concurrent Paper Tracks - Session II

Collection

2015 ASEE International Forum

Authors

Anna Friesel, Technical University of Denmark; Tatjana Welzer, University of Maribor, Faculty of Electrical Engineering and Computer Science; Ian Andrew Grout, University of Limerick; Dorian A. Cojocaru, University of Craiova, Romania

Tagged Topics

International Forum

as their route to personal development. Page 19.26.5Each of these types of learner have different support needs especially in relation to developingcompetence in laboratory skills and generic, transferable competences (such as group working,presentation skills, creativity, etc.). The work package-WP46,7 explores the implications on theeducation system of students with disabilities (reference of best practice across Europe in supportingstudents with such issues, eg: Dyslexia, Dyspraxia, Mental Health, Autism, Aspergers, etc.).As we are aware of the importance of technology in the educational processes and life of disabledstudents, one

Collection

2015 Pacific Southwest Section Meeting

Authors

Martin Koch

147production rate and high cost of use. While still explaining and demonstrating the possibilities ofthe AM processes we focused on the rapid machining of patterns. We have been quite successfulin this and hopefully the descriptions of the details of the Course and the Laboratory will showthis. But, the transformation is still on-going.Details of the CourseIME 141 Netshape is a one unit hands-on laboratory course that meets once a week for threehours throughout a 10 week quarter. We have between 120 to 168 students each and everyquarter. Each laboratory section is limited to 24 students for safety reasons, so every quarter weoffer 6 to 7 lab sections. The students come mainly from Mechanical, Industrial andManufacturing Engineering with representation

Conference Session

Best of DEED

Collection

2015 ASEE Annual Conference & Exposition

Authors

Ibrahim Mohedas, University of Michigan; Grace Louise Cravens, Sienko Research Group; Shanna R. Daly, University of Michigan; Kathleen H. Sienko, University of Michigan

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

Paper ID #13654Valuing and engaging stakeholders: The effects of engineering students’ in-teractions during capstone designIbrahim Mohedas, University of Michigan Ibrahim Mohedas is currently a Ph.D. candidate in the Department of Mechanical Engineering at the University of Michigan. He received his B.S. in mechanical engineering from the University of Texas at Austin in 2011. His research focuses on the design of medical devices for resource limited settings, particularly related to the use of design ethnography in developing these technologies. He works in the Laboratory for Innovation in Global Health Technology (LIGHT

Conference Session

Computers in Education Engineering Division Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Peter Goldsmith P.Eng., University of Calgary

Tagged Divisions

Computers in Education

. Page 26.1752.1 c American Society for Engineering Education, 2015 Work in Progress: Flatlab–An interactive learning environment for experiential learning, problem-based assessment, and dynamic instruction in engineering Peter Goldsmith peter.goldsmith@ucalgary.ca Dept. Mechanical Engineering University of CalgaryAbstractThe goal of this work in progress is to design a virtual environment that integrates experientiallearning with assessment and teaching. The proposed FLATLAB is a Focused Learning,Assessment, and Teaching Laboratory with a

Conference Session

Best Papers in K-12 / Pre-college Division

Collection

2015 ASEE Annual Conference & Exposition

Authors

Aran W Glancy, University of Minnesota, Twin Cities; Tamara J Moore, Purdue University, West Lafayette; Siddika Selcen Guzey, Purdue University, West Lafayette; Karl A Smith, Purdue University, West Lafayette

Tagged Divisions

K-12 & Pre-College Engineering

in laboratory investigations or testand evaluate engineering designs, they must apply what they know about data analysis inrealistic situations. Because these contexts are more applied and more realistic than whatstudents encounter in typical mathematics and statistics classes, however, data analysistasks embedded within STEM activities can create for students different obstacles as wellas potentially creating new opportunities to learn. Thus, understanding the ways in whichstudents engage with data in applied engineering and science activities is an importantstep in helping to maximize the learning opportunities inherent in integrated STEMsettings. In order to gain some insight into this process for fifth grade students, this casestudy

Conference Session

First-year Programs Division Technical Session 2: Design in the First Year: Challenges and Successes

Collection

2015 ASEE Annual Conference & Exposition

Authors

Kevin Calabro, University of Maryland, College Park; Ayush Gupta, University of Maryland, College Park; Jackelyn Raquel Lopez Roshwalb, University of Maryland, College Park

Tagged Divisions

First-Year Programs

 second major undertaking was re­purposing the laboratories that support the ENES 100 course to better reflect the new project.  For example, hot wire cutters and a small wind tunnel that were used extensively for the hovercraft project were placed in storage and drill presses and mechanical fastening tools were purchased for the OSV project.  Additional laboratory modifications included developing the vision system and building in­lab test beds (7 x 14 ft sand boxes).  A notable shortcoming in the project transition was the lack of time and expertise to  Page 26.95.9develop laboratory equipment to test the output of motors or the wheel­sand

Conference Session

Teaching & Learning in Graduate Programs

Collection

2015 ASEE Annual Conference & Exposition

Authors

Guangming Chen, Morgan State University; Jumoke 'Kemi' Ladeji-Osias, Morgan State University; Gbekeloluwa B. Oguntimein, Morgan State University; Young-Jae Lee, Morgan State University

Tagged Topics

Diversity

Tagged Divisions

Graduate Studies

advanced education or career advancement. Many Morgan State University (MSU) graduate students come from economically disadvantaged families and have very limited financial support for their full-time graduate study. Some of them solely count on the scholarships provided by the school or have to take out student loans. Supported by National Science Foundation (NSF) Scholarships for Science, Technology, Engineering, and Mathematics (S-STEM), NASA research grants and other Federal research grants, many MSU engineering graduate students have been involved in applied research projects with NASA Goddard Space Flight Center, Army Research Laboratory, and the local industry. These projects include but

Conference Session

Multidisciplinary Approaches for Enhancing Non-technical Skills

Collection

2015 ASEE Annual Conference & Exposition

Authors

Elizabeth Wuerffel, Valparaiso University; Jeffrey Dale Will, Valparaiso University

Tagged Topics

Diversity

Tagged Divisions

Multidisciplinary Engineering

and engineering projects. She also co-directs the Welcome Project (welcomeproject.valpo.edu), a first-person story collection about identity and inclusion.Dr. Jeffrey Dale Will, Valparaiso University Will completed his B.S.E.E., M.S.E.E., and Ph.D. degrees from the University of Illinois at Urbana- Champaign and has been a full-time faculty member in the Electrical and Computer Engineering De- partment at Valparaiso University since August of 2001. He teaches courses in senior design, computer architecture, digital signal processing, freshman topics, and circuits laboratories and is heavily involved in working with students in undergraduate research. Will is also a 2013 recipient of the Illinois-Indiana ASEE

Conference Session

Computer Science, Computer Engineering, and Digital Systems Education 1

Collection

2015 ASEE Annual Conference & Exposition

Authors

Cheng Chih Liu, University of Wisconsin Stout

Tagged Divisions

Electrical and Computer

American Society for Engineering Education, 2015Teaching Digital Designs by Building Small Autonomous Robotic Vehicles Using an FPGA PlatformThis article discusses the experiences of implementing a new model in teaching and learningdigital designs using Verilog in an embedded systems design course. This paper discusses thecourse structure, laboratory exercises, student projects and project evaluation process, and finallythe student evaluation outcomes. Students’ course assessment and student learning outcomeswere very positive. In many existing digital designs curriculum, students learn how to createstructural and behavioral models in Verilog Hardware Description Language (HDL) to designsimple combinational and

Conference Session

ECCD Innovative Teaching Methods & Outreach

Collection

2015 ASEE Annual Conference & Exposition

Authors

Madhumi Mitra Ph.D, University of Maryland, Eastern Shore; Abhijit Nagchaudhuri, University of Maryland, Eastern Shore; Xavier Shastri Domnique Henry, University of Maryland, Eastern Shore; Courtney RC Shirvani, University of Maryland Eastern Shore

Tagged Topics

Diversity

Tagged Divisions

Energy Conversion and Conservation

, Electricityy Scenarios) simulation tool developed byNational Renewable Energy Laboratory (NREL) of the United States Department of Energy(DOE) and made freely available over the internet allowed participants to play out scenarios toreduce carbon foot print based on various situations that can be realized through policy decisionsleading to building improvements, reduction of industrial pollution, use of alternative fuels,electric cars, and other design modifications in the transportation sector, and cleaner moreefficient conversion technologies for electricity generation and conservation. A total of forty oneeducators have been trained through this program over a period of four years. The evaluationsurveys (content and perceptions) reveal that

Conference Session

Supply Chain and Logistics in Manufacturing Education

Collection

2015 ASEE Annual Conference & Exposition

Authors

Sangarappillai Sivaloganathan, United Arab Emirates University; Omar Gamal Ayad; Waseem Yousef Hittini

Tagged Topics

Diversity

Tagged Divisions

Manufacturing

learning and with respect toprograms and courses, they describe how will the successful learner be changed. Theresponsibility of the course provider or instructor is to formulate (i) objectives (ii)instructional activities and materials and (iii) assessments as defined below: i. Objectives: Objectives thoroughly clarify and narrow the outcomes to specific and measurable goals. They identify what is to be accomplished in terms of comprehension, application and integration. ii. Instructional Activities and Materials: Instructional Activities refers to teaching and teaching-related activities such as preparing for and conducting class meetings, including laboratory work and developing instructional materials. iii

Conference Session

Flipped Electrical and Computer Engineering Classrooms 1

Collection

2015 ASEE Annual Conference & Exposition

Authors

Steven G Northrup, Western New England University; John J. Burke P.E., Western New England University

Tagged Topics

Diversity

Tagged Divisions

Electrical and Computer

Electromagnetics, Physics of Semiconductor Devices, High Frequency Circuit Design, Antenna Design and Analog Electronics. Prior to joining WNE, Dr. Burke was with the EM Observables Division of Mission Research Corporation (MRC) from 1995 to 2000. From 1992 to 1995, Dr. Burke was with the MacNeal-Schwendler Corporation (MSC) Corporation. From 1990 to 1992, Dr. Burke was with Compact Software as a senior research engineer. From 1987 to 1990, Dr. Burke was with the Microwave Electronics Laboratory at the University of Massachusetts. From 1984 to 1986, Dr. Burke was with the Hughes Aircraft Corporation. Page 26.57.1