Collection

2022 ASEE Gulf Southwest Annual Conference

Authors

Darius Miles Gatson, Houston Baptist University; Ryan Duane Barnes, Houston Baptist University

Tagged Topics

Diversity

RISC-V Instruction Set Architecture (ISA). Toimplement this project, we used the SN74LS283N 4-bit full adder IC, the SiFive HiFive1 Rev B boardthat hosts a 32-bit RISC-V processor, breadboard, LEDs, and few resistors. To program the circuit,we used Visual Studio Code with the PlatformIO extension to allow deployment and debugging of theRISC-V assembly code on the HiFive board. The goal of this project was to demonstrate the full 4-bitadder truth table by cycling through different inputs and displaying the adder output using LED lights.The input to the adder was driven by onboard GPIO pins that were actuated through RISC-V assemblycode. Using the SiFive HiFive1 Rev B manuals, we identified the base memory addresses of the GPIOpins and the

Conference Session

College Industry Partnerships Division (CIP) Technical Session 1

Collection

2023 ASEE Annual Conference & Exposition

Authors

Martha Cervantes, Johns Hopkins University ; Sydney Danielle Floryanzia, University of Washington and Johns Hopkins University; Jackie Sharp; William Roberts Gray-Roncal; Erik C. Johnson, University of Illinois, Urbana-Champaign

Tagged Topics

Diversity

Tagged Divisions

College Industry Partnerships Division (CIP)

Paper ID #39983Empowering Trailblazers toward Scalable, Systematized, Research-BasedWorkforce DevelopmentMartha Cervantes, Johns Hopkins University Martha Cervantes is a Mechanical Engineer at the Johns Hopkins University Applied Physics Labora- tory where she works in mechanical design and integration of robotic systems. Additionally, Martha is the project manger of the CIRCUIT Program at JHU/APL, which connects and mentors students from trailblazing backgrounds to STEM careers through science and engineering projects. Martha received her B.S. in Mechanical Engineering from Johns Hopkins University, and she is currently

Conference Session

Learning through Instrumentation: Experiences and Applications

Collection

2023 ASEE Annual Conference & Exposition

Authors

Asad Yousuf, Savannah State University; Md Rakibul Karim Akanda, Savannah State University

Tagged Topics

Diversity

Tagged Divisions

Instrumentation Division (INST)

in Modeling and Simulation and lack of institutions with a degreeprogram in the discipline in our region, designing, promoting and implementing a degree programin an institution that traditionally attracts students from the minority population will represent aviable pathway to increasing the participation of underrepresented minorities in this emerging field.After an extensive search we could not identify any Minority Serving Institution (MSI) that offers adegree program in Modeling and Simulation in our region. This paper will present the ModellingSimulation project which will help students learn the concepts of Modeling and Simulation. Themodeling and simulation project work is supported by the grant from the Department of Education.To

Conference Session

K-12 & Pre-College Engineering Division: Use of Technology and Tools for K-12 Engineering Education

Collection

2016 ASEE Annual Conference & Exposition

Authors

Siddika Selcen Guzey, Purdue University, West Lafayette; Tamara J. Moore, Purdue University, West Lafayette

Tagged Topics

Diversity

Tagged Divisions

Pre-College Engineering Education Division

Purdue University Purdue University sguzey@purdue.edu tamara@purdue.edu Project Website: http://engineeringteams.org Project Description The EngrTEAMS project is an engineering, design-based approach to teacher professional development that has 50 teachers per year designing curricular units for science topic areas related to the Next Generation Science Standards (NGSS). The project includes summer professional development and curriculum writing workshops, paired with coaching, to allow teams of teachers to design engineering curricular units focused on science concepts, meaningful data analysis, and measurement. Each unit goes through an extensive design research

Conference Session

K-12 & Pre- College Engineering Division Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Robert Shultz, Drexel University; Daniel Edward Ueda, GRASP Laboratory, University of Pennsylvania; Jessica S Ward, Drexel University (Eng. & Eng. Tech.); Adam K Fontecchio, Drexel University (Eng. & Eng. Tech.)

Tagged Topics

Diversity

Tagged Divisions

K-12 & Pre-College Engineering

fellow and a high-schoolteacher.Throughout the course of the year, students participate in a series of hands-on activities relatingto computer technologies and cybersecurity, including case studies, small group projects, andclass discussions. Students conduct surveys of their peers and construct infographic displaysillustrating cybersecurity-related data, such as average password length. At the same time,students begin building basic circuits, and using Arduino microcontrollers accomplish simpletasks, such as causing a single LED light to blink at a defined rate. The year culminates in thedesign and creation of Arduino-based biomimetic devices for user identification, where studentsapply their new computer programming and circuitry skills to

Conference Session

Design in Engineering Education Division: Student Empathy & Human-centered Design

Collection

2019 ASEE Annual Conference & Exposition

Authors

Colin Dixon, Concord Consortium; Corey T. Schimpf, The Concord Consoritum; Sherry Hsi, Concord Consortium

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

Analytics Scientist with interest in design research, learning analytics, re- search methods and under-representation in engineering, A major strand of his work focuses on develop- ing and analyzing learning analytics that model students’ cognitive states or strategies through fine-grained computer-logged data from open-ended technology-centered science and engineering projects. His disser- tation research explored the use of Minecraft to teach early engineering college students about the design process.Ms. Sherry Hsi, Concord Consortium Dr. Sherry Hsi is the Executive Vice President of the Concord Consortium. She leads the strategic de- velopment, design, and research of learning technologies using her background in

Conference Session

Educational Research and Methods Division (ERM) Technical Session 7

Collection

2024 ASEE Annual Conference & Exposition

Authors

Djedjiga Belfadel, Fairfield University

Tagged Topics

Diversity

Tagged Divisions

Educational Research and Methods Division (ERM)

) program, aimed at promoting undergraduate research. Theprogram offers students the opportunity to engage in voluntary research, receive stipends, andaccess paid residency dorms. It contributes to academic growth and practical experience,enhancing communication skills, presentation abilities, resilience, teamwork, and problem-solving capabilities.The program spans eight weeks from June 1st to July 27th. Students are required to dedicate 20hours per week to their respective research projects and attend weekly seminars organized by thedean's office on important topics such as responsible conduct of research training, intellectualproperty rights, regulatory aspects of research including Institutional Review Board (IRB) andInstitutional Animal Care

Conference Session

NSF Grantees Poster Session

Collection

2024 ASEE Annual Conference & Exposition

Authors

Amy B Chan Hilton, University of Southern Indiana

Tagged Topics

Diversity, NSF Grantees Poster Session

Faculty Communities Exploring Data and Sharing Their StoriesMotivation and Project OverviewThis NSF Improving Undergraduate STEM Education (IUSE: EHR) Institutional andCommunity Transformation (ICT) capacity-building project is designed to support faculty tocollaboratively explore questions on student learning and success in introductory and gatewayundergraduate STEM courses, such as early engineering courses as well as prerequisite math andscience courses. The project is motivating faculty to consider evidence-based teaching strategiesby including them as co-designers of learning analytics tools and storytellers inspired by the dataand their reflections. Learning analytics uses data about learners and learning to draw

Collection

2025 ASEE -GSW Annual Conference

Authors

Kendra Zagozda, Fort Worth ISD; Roberto Wheelock; Raziye Aghapour, The University of Texas at Arlington; Soulmaz Rahman Mohammadpour, The University of Texas at Arlington; Jaivardhan Sood, The University of Texas at Arlington; Erick C. Jones, The University of Texas at Arlington; Victoria C. P. Chen, The University of Texas at Arlington

Tagged Topics

Diversity

Wheelock, Great Hearts Academy, Irving, TX Raziye Aghapour, Soulmaz Rahman Mohammadpour, Jaivardhan Sood, Victoria C. P. Chen, Ph.D., Erick C. Jones Jr., Ph.D. Industrial, Manufacturing, and Systems Engineering Department University of Texas at Arlington AbstractWe present K-12 educational lesson plans towards conducting college level research in engineering.These experiences are an extension of a National Science Foundation Research Experiences forTeachers project (EEC-2055705), where math and science K-12 teachers are trained to conductresearch on sustainable and resilient engineering systems in various disciplines. For

Conference Session

Ocean & Marine Engineering Division Technical Session 2

Collection

2023 ASEE Annual Conference & Exposition

Authors

Daniel Brahan, US Coast Guard Academy; Thomas W. Denucci, United States Coast Guard Academy; Jaye Falls, United States Naval Academy; Paul H. Miller, P.E., United States Coast Guard Academy; Peter A. Sousa, United States Coast Guard Academy

Tagged Topics

Diversity

Tagged Divisions

Ocean and Marine Division (OMED)

composites and micro-autonomous surface vessels.Peter A. Sousa, United States Coast Guard Academy Engineering Lab Technician in the School of Engineering and Cyber Systems at the United States Coast Guard Academy (USCGA). After serving as a Machinery Technician in the United States Coast Guard I worked for a top-end yacht service company before joining the USCGA. My area of expertise include fabrication in metals, wood and composites, and operation of a variety of CNC machines ©American Society for Engineering Education, 2023 Assessment and Experience of Boatbuilding-based PBL in Two Naval Architecture ProgramsAbstractNumerous studies highlight the advantages of Project

Conference Session

Construction Engineering Division (CONST) Technical Session 2

Collection

2023 ASEE Annual Conference & Exposition

Authors

Behnam Shadravan, Florida A&M University

Tagged Topics

Diversity

Tagged Divisions

Construction Engineering Division (CONST)

engineering, research, and teaching experience in Construction Management, Materials and Methods, and Structural, Civil, and Geotechnical Engineering. His research areas are Structural Resilience, Sustain- able Construction Methods and Materials, Sustainable Development, Structural Retrofitting, Damage and Collapse Patterns, Soil Improvement Methods, and engineering education. He has a broad engineering experience in large and small-scale projects, including large dams, bridges, and buildings in different fields of Construction, geotechnical and structural engineering. ©American Society for Engineering Education, 2023Teamwork Assessment Methods in Undergraduate Projects and Lab CoursesTeamwork

Conference Session

NSF Grantees Poster Session

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Christine Alvarado, University of California, San Diego; Joe Hummel, University of Illinois at Chicago; Diba Mirza, University of California, Santa Barbara; Renata A. Revelo, University of Illinois at Chicago

Tagged Topics

Diversity, NSF Grantees Poster Session

minorities in CS and related disciplines.DesignThe design of ERSP is based on four pillars:1. A course-supported apprentice model2. A dual-mentoring framework3. A team-based environment4. An inclusive selection processERSP students work in teams under the guidance of a research faculty member, as part of anactive research project. This apprenticeship is supported by a required course that introducesstudents to research in a structured class setting: topics, findings, how to read and evaluate aresearch paper, and a variety of research exercises. The students are mentored by both ERSPmentors and a member of the research project (faculty, or graduate student). The program isteam-based, building a strong sense of student community and support

Conference Session

Software Engineering Division Technical Session 2

Collection

2017 ASEE Annual Conference & Exposition

Authors

Bruce R Maxim, University of Michigan, Dearborn; Sushil Acharya, Robert Morris University; Stein Brunvand, University of Michigan-Dearborn; Marouane Kessentini, University of Michigan-Dearborn

Tagged Topics

Diversity

Tagged Divisions

Software Engineering Division

Paper ID #17715WIP: Introducing Active Learning in a Software Engineering CourseDr. Bruce R Maxim, University of Michigan, Dearborn Bruce R. Maxim has worked as a software engineer, project manager, professor, author, and consultant for more than thirty years. His research interests include software engineering, human computer interaction, game design, social media, artificial intelligence, and computer science education. Dr. Maxim is associate professor of computer and information science at the University of Michigan—Dearborn. He established the GAME Lab in the College of Engineering and Computer Science. He has

Conference Session

Faculty Development

Collection

2017 ASEE Annual Conference & Exposition

Authors

Bugrahan Yalvac, Texas A&M University; Antonia Ketsetzi; Xiaobo Peng, Prairie View A&M University; Suxia Cui, Prairie View A&M University; Lin Li, Prairie View A&M University; Yongpeng Zhang, Prairie View A&M University; Deniz Eseryel, North Carolina State University; T. Fulya Eyupoglu, North Carolina State University; Tianyun Yuan, Prairie View A&M University

Tagged Topics

Diversity

Tagged Divisions

Educational Research and Methods

, 21st century skills, and design and evaluation of learning environments informed by the How People Learn framework.Antonia Ketsetzi Antonia Ketsetzi is a graduate student in the Department of Teaching Learning & Culture at Texas A&M University. She received her BS degree in Mechanical Engineering at the Technological Educational Institute in Crete. She received her M.Sc degree in Environmental Technologies at University of Crete in Greece. Ketsetzi’s research is in How People Learn / Engineering Design and evaluation of educational innovations. She also serves as a Research Assistant in the project. Antonia Ketsetzi, M.Ed. Texas A&M University ketsetzi@tamu.eduDr. Xiaobo Peng, Prairie View A&M

Conference Session

NSF Grantees Poster Session I

Collection

2016 ASEE Annual Conference & Exposition

Authors

Bimal P. Nepal, Texas A&M University; Michael Johnson, Texas A&M University; Maria Antoun Henri, Texas A&M University ; Norma Perez, Houston Community College; Madeline Burillo, Houston Community College; Roberto Sanchez, Houston Community College

Tagged Topics

Diversity, NSF Grantees Poster Session

; specifi- cally, the cost modeling and analysis of product development and manufacturing systems; computer-aided design methodology; and engineering education.Miss Maria Antoun Henri, Texas A&M University Maria Henri is a doctoral student in Educational Psychology, at Texas A&M University, focusing on measurement and statistics. She graduated from the University of Texas at San Antonio with a MS in psychology in 2015, where she taught undergraduate psychology courses. She worked as a data analyst on a variety of quantitative and qualitative projects that strived to improve education in San Antonio. Her interests include hierarchical linear modeling and structural equation modeling. Currently, she is Graduate

Conference Session

Assessment of Engineering Leadership Skills

Collection

2015 ASEE Annual Conference & Exposition

Authors

William J. Davis P.E., The Citadel; Dimitra Michalaka P.E., The Citadel

Tagged Topics

Diversity

Tagged Divisions

Engineering Leadership Development Division

graduation.Attainment of proficiency for each outcome is measured using embedded indicators based onmapping to the six levels of Bloom’s Taxonomy 11,12. Table 1 summarizes the 22 CEE Page 26.1465.3Table 1 Summary of Citadel Civil Engineering CEE Department Program Outcomes Dept. Program Outcome Dept. Program Outcome with Professional Skills Linkage 1. Mathematics 2. Science 3. Solid & Fluid Mechanics 4. Experiments 5. Problems Solving a.) Techniques b.) Tools Design 6. a.) Environmental 7. b.) Structural 8. c.) Land Development 9. d.) Transportation 10. Contemporary Issues 11. Project Management

Conference Session

International Division Technical Session 1

Collection

2015 ASEE Annual Conference & Exposition

Authors

Christopher Joseph Lombardo, Harvard School of Engineering and Applied Sciences; Daniela Faas, Harvard University; Avinash Uttamchandani, Harvard SEAS; Evelyn Lynn Hu, SEAS Harvard

Tagged Topics

Diversity

Tagged Divisions

International

-HKUST International SummerDesign Experience occurred completely outside of any classroom setting during nine weeks andwas co-located in Boston and Hong Kong for four weeks each. The reason to hold this programin both Hong Kong and Cambridge, MA was to give the students a chance to work within andexperience both campuses, culturally and geographically. The pedagogical approach was unique,as there was no embedded curriculum and students were able to freely pursue a project in a giventopic area that they were interested in. The major topic for this summer was Visible LightCommunication systems. In this paper we present the general pedagogical approach to thisexperience and provide some insights and examples of the effect the program had on

Conference Session

NSF Grantees Poster Session

Collection

2024 ASEE Annual Conference & Exposition

Authors

Noppadon Sathitsuksanoh, University of Louisville; Zhihui Sun, University of Louisville; Jason Cullen Immekus, University of Louisville

Tagged Topics

Diversity, NSF Grantees Poster Session

-funded project, we have developed an innovative teaching andtraining methodology to address this critical gap and engage undergraduate students in STEMfields. We actively involve eight STEM undergraduate students in interdisciplinary andlaboratory-based research activities focused on waste-to-value concepts. Through ten weeks oftraining, all participants were immersed in the practical applications of sustainable wastemanagement strategies through self and peer learning. The project outcomes were evaluated byassessing the knowledge acquisition and skill development resulting from the 10-week trainingperiod of our eight student participants with diverse STEM backgrounds.Our initiative extends beyond individual student growth; the insights gained

Conference Session

Two-Year College Division Poster Session

Collection

2023 ASEE Annual Conference & Exposition

Authors

Ibrahim F. Zeid, Northeastern University; Jennifer Ocif Love, Northeastern University; Claire Duggan, Northeastern University

Tagged Topics

Diversity

Tagged Divisions

Two-Year College Division (TYCD)

meetings with mentors; extensiveprofessional development seminars; formal research training including daily reflection journals,poster presentations and technical writing with a faculty member. REU students completed twodeliverables: a research project and an open-ended Arduino engineering design project. Initially,students chose their research projects from a list of available opportunities. Once a match wassecured, students worked in their research labs daily with their graduate student and facultymentors.A list of students’ engineering research projects included:1. Accelerating Operations on Graph Neural Network2. Computational Design of Single Atom Catalysts for Electrochemical CO2 Reduction3. Information Theory to Pinpoint Causal Links

Conference Session

NSF Grantees Poster Session

Collection

2023 ASEE Annual Conference & Exposition

Authors

Shasta Ihorn, San Francisco State University; Anagha Kulkarni, San Francisco State University; Michael Savvides, San Francisco State University; Ilmi Yoon

Tagged Topics

Diversity, NSF Grantees Poster Session

diversity.4 The program consists of five classes,unique to the minor, that span across two academic years (4 semesters) and relies on the use ofcohort-based program structure, near-peer mentoring, and project-driven learning. The cohortstructure allows for close relationships to form, combatting the social isolation that historicallymarginalized students may feel in CS classes. Peer mentoring benefits students by offeringfurther academic, social, and professional development support within the program. Project-based learning provides strong ties to students’ major area(s) of study (primarily biology andbiochemistry) and supports students’ future success in fields that are becoming increasingly data-driven.1 Finally, the minor program courses focus

Conference Session

Continuing Professional Development Division (CPD) Technical Session 1

Collection

2023 ASEE Annual Conference & Exposition

Authors

Iftekhar Ibne Basith, Sam Houston State University; Ulan Dakeev, Sam Houston State University; Vajih Khan, Sam Houston State University; Sumith Yesudasan, Sam Houston State University; Faruk Yildiz, Sam Houston State University; Suleiman M Obeidat, Sam Houston State University; Euijin Yang; Christopher J. Rabe

Tagged Topics

Diversity

Tagged Divisions

Continuing Professional Development Division (CPD)

professional developmentand trying to quickly educate their workforce to adopt Agile as an underlying approach to their overalldigital transformation projects. Agile workshops and certifications for professional development take onvarious forms. Professionals with no exposure to Agile are exposed to workshops to immerse themselvesin the values, principles, and practices, with the goal to quickly gaining skills to be part of effective Agileteams, conversant in terminology, approach, and digital lifecycle. In the core Agile sessions, thefundamentals of Agile history, mindset, values, principles, and practices are taught to the attendees. Theyare exposed to case scenarios allowing them to learn various roles and apply Agile to digital developmentto in

Conference Session

Civil Engineering Division Poster Session

Collection

2018 ASEE Annual Conference & Exposition

Authors

Yusuf A Mehta, Rowan University; Ayman Ali, Rowan University; Parth Bhavsar, Rowan University; Seri Park, Villanova University; Kakan C. Dey, West Virginia University

Tagged Topics

Diversity

Tagged Divisions

Civil Engineering

at Rowan University. His research interests include Intelligent Transportation System (ITS), Connected, Autonomous, and connected-automated Vehicle Technologies, Transportation Data Analytics, and Alter- native Fuel Vehicles. Dr. Bhavsar has published in peer reviewed journals such as the Transportation Research Part C: Emerging Technology, Transportation Research Part D: Transport and the Environment and Transportation Research Record Journal of the Transportation Research Board. Dr. Bhavsar was pre- viously a postdoctoral fellow in a connected vehicle research program in the Glenn Department of Civil Engineering at Clemson University, where he worked on several connected vehicle technology research projects

Conference Session

Energy Conversion and Conservation Division Technical Session 2

Collection

2019 ASEE Annual Conference & Exposition

Authors

Patrick A. Tebbe, Minnesota State University, Mankato; Bruce Allen Peterson, Minnesota State Energy Center of Excellence

Tagged Topics

Diversity

Tagged Divisions

Energy Conversion and Conservation

level, he administers implementation of 9 research projects in renewable energy as well as serving as Executive Director of the Minnesota State Energy Center of Ex- cellence. Bruce is a leader of collaborative efforts in the Minnesota system. He has been an initiator of many efforts of statewide influence. As a charter member of the Minnesota Energy Consortium, he has served on the leadership steering committee since the inception of the group. His leadership led to establishing the Energy Technical Specialist program, a multi-college program leading to industry positions in energy production in solar, wind, bio-fuels, fossil and nuclear fields. Current focus areas of the Minnesota Energy Center include education

Conference Session

International STEM Education: International Division Technical Session 6

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Sanjeev Adhikari, Kennesaw State University

Tagged Topics

Diversity

Tagged Divisions

International

, faculty members traveled to the country of Honduras to help installfour shipping containers that had been converted into STEM classrooms (labs). Instantaneously,an entire town was granted the opportunity to alter the cycle of poverty gripping their communitiesfor generations. Being part of a delegation of educators and students including those representingSKY (Skilled Knowledgeable Youth) (a 501c3 non-profit organization) [5], they delivered andinstalled the labs in the town of Belfante, Honduras. The converted containers were the product ofyear-long STEM projects completed by four high schools in Alabama. The four containers wereconverted into a computer lab, a welding lab, a woodshop, and an engine repair lab.This paper chronicles this and

Conference Session

ET Curriculum and Programs II

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Sanjeevi Chitikeshi, Old Dominion University; Shirshak K. Dhali P.E., Old Dominion University; Betsey Odell, Commonwealth Center for Advanced Manufacturing ; Vukica M. Jovanovic, Old Dominion University; Cheng Y. Lin P.E., Old Dominion University

Tagged Topics

Diversity

Tagged Divisions

Engineering Technology

Controls for Biomedical Applications and Structural Health monitoring. He worked on funded projects from NASA, Caterpillar and Federal High way. He published journals and conference papers in the areas of smart instrumentation and control and mechatronics systems.Dr. Shirshak K. Dhali P.E., Old Dominion UniversityMrs. Betsey Odell, CCAM - Commonwealth Center for Advanced ManufacturingDr. Vukica M. Jovanovic, Old Dominion University Dr. Vukica Jovanovic is a Batten Fellow and an Associate Professor of Engineering Technology in Me- chanical Engineering Technology Program. She holds a Ph.D. from Purdue University in Mechanical Engineering Technology, focuses on Digital Manufacturing, Magistar (Ph.D. candidate) degree in Ind

Conference Session

Focus on the Classroom: Innovative Pedagogies

Collection

2016 ASEE Annual Conference & Exposition

Authors

David I. Spang, Rowan College at Burlington County; Kathryn E. Strang, Rowan College at Burlington County

Tagged Topics

Diversity

Tagged Divisions

Two Year College Division

. success for each. Conduct assessments and collect data using qualitative or quantitative analysis. Figure 1. RCBC Assessment CycleWithin the assessment process, a RCBC faculty is assigned to chair an assessment project (i.e., aspecific course) for each academic year and, working collaboratively with the assessmentcoordinator, the assessment chair determines how to measure the intended learning outcomes foreach assessment project. The chairperson creates the assessment device(s) and

Conference Session

Design in Engineering Education Division Poster Session

Collection

2016 ASEE Annual Conference & Exposition

Authors

Janice M. Margle P.E., Pennsylvania State University - Abington; Kathleen Fadigan, Pennsylvania State University - Abington

Tagged Topics

Diversity

Tagged Divisions

Design in Engineering Education

design to freshmen. From its start in 2008 through 2014, she was also co-PI and project manager of Penn State’s $2.5M, NSF-sponsored, Toys’n MORE project.Dr. Kathleen Fadigan, Pennsylvania State University - Abington Kathy Fadigan received her BS in Biology and her Ed.D. in Curriculum, Instruction, and Technology in Education from Temple University. She is currently the Program Chair for Education at Penn State Abington. She teaches courses in sustainability, early childhood and STEM education for pre-service elementary teachers. Her research investigates the long-term effects of out-of-school STEM programs on students’ educational and career trajectories. c American Society for Engineering

Conference Session

Curriculum Exchange

Collection

2015 ASEE Annual Conference & Exposition

Authors

Corey A Mathis, Purdue University, West Lafayette; Tamara J Moore, Purdue University, West Lafayette; Siddika Selcen Guzey, Purdue University, West Lafayette

Tagged Topics

Diversity

Tagged Divisions

K-12 & Pre-College Engineering

tamara@purdue.edu sguzey@purdue.edu Project Website: http://engrteams.org Project Description The Engineering to Transform the Education of Analysis, Measurement, & Science (EngrTEAMS) project is an engineering, design-based approach to teacher professional development that has 50 teachers per year designing curricular units for science topic areas related to the Next Generation Science Standards. The project includes summer professional development and curriculum writing workshops, paired with coaching, to allow teams of teachers to design engineering curricular units focused on science concepts, meaningful data analysis, and measurement. Each unit goes through an extensive design research

Conference Session

Latest Trends and Implementations in Manufacturing Education

Collection

2015 ASEE Annual Conference & Exposition

Authors

Sheng-Jen Hsieh, Texas A&M University

Tagged Topics

Diversity

Tagged Divisions

Manufacturing

research allows them to learn about recent discoveries and innovations,share about them in the classroom, and thereby encourage and stimulate students to pursueengineering and computer science careers such as industrial automation. The paper will describeprogram activities, research projects, outcomes, and lessons learned from a National ScienceFoundation-sponsored Research Experiences for Teachers program. Participants were recruitedfrom science, technology, engineering and math departments in high schools and collegesthroughout the U.S. Special effort was made to recruit teachers and instructors from districts andtwo-year colleges with large numbers of underrepresented minority students. Program objectiveswere to 1) provide opportunities for

Conference Session

Cooperative & Experiential Education Division Technical Session 2

Collection

2015 ASEE Annual Conference & Exposition

Authors

Greg Rulifson P.E., University of Colorado, Boulder; Nathan E Canney PE, Seattle University; Angela R Bielefeldt, University of Colorado, Boulder

Tagged Topics

Diversity

Tagged Divisions

Cooperative & Experiential Education

interests in engineering education include service-learning, sustainable engineering, social responsibility, ethics, and diversity. Page 26.1368.1 c American Society for Engineering Education, 2015 Service-Motivated Students’ Transitions to PracticeAbstractWith a growing emphasis on developing holistic engineers, many engineering educators areturning to service-based pedagogies to help students gain broader perspectives of their roles asengineers in society. The explosive growth of Engineers Without Borders (EWB) and the rise ofprograms such as Purdue’s Engineering Projects in