Conference Session

First-Year Programs Division Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

William C. Oakes, Purdue University, West Lafayette; Carla B. Zoltowski, Purdue University, West Lafayette; Monica E. Cardella, Purdue University, West Lafayette; William Travis Horton, Purdue University

Tagged Divisions

First-Year Programs

Page 24.782.7EPICS. Assignments were tailored to complement the learning community sequence. Anexample is that the reflection assignments in the new course built on the EPICS experiences. Forexample, critical and reflective thinking is an area assessed in EPICS but first-year students oftenstruggle. To help them, a weekly reflection was included in the common engineering course ontheir EPICS experience. Feedback was provided and this helped their work in the EPICS course.The common course also provided a means to address their experiences and introduce aspects ofthe EPICS experiences. For example, the assessments in EPICS are modelled after professionalperformance appraisals and require students to identify their most significant

Conference Session

Women in Engineering Division Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

Janis P. Terpenny, Iowa State University

Tagged Divisions

Women in Engineering

behind the approach and methods found in this paper: to succeed inleadership, indeed in life in general, one must be aware of and appreciate what motivates oneselfand others. This requires reflection and answers. Where is your (their) passion? Answering thisquestion is at the heart of Mary Poppins’ insights. When she sings, “A spoonful of sugar helpsthe medicine go down” and says, “in every job that must be done there is an element of fun …”,she is trying to motivate the children to take medicine that, without sugar, would otherwise havea bad taste. She is also making a job fun that the children did not want to do (picking up clothesand clutter). Mary motivates with sugar and fun, rather than raising her voice, behaving harshly,or worse. There

Conference Session

Design Across the Curriculum

Collection

2014 ASEE Annual Conference & Exposition

Authors

Aruna Shekar, Massey University

Tagged Divisions

Design in Engineering Education

: Example course assessment details Assessment Team or Individual Weighting (%)1 Project proposal Team 102 Concept design assessment Individual 103 Detailed design Team 204 Oral presentation Individual & Team 20 (10+10)5 Final project report Team 306 Log book & self-reflection Individual 10Assessment rubrics provide clear

Conference Session

Discipline Specific Topics and Techniques

Collection

2014 ASEE Annual Conference & Exposition

Authors

Katy Luchini-Colbry, Michigan State University; Korine Steinke Wawrzynski, Michigan State University; Megan A. Shannahan, Michigan State University

Tagged Divisions

Graduate Studies

undergraduate researchers and their own role at theuniversity (faculty member, post-doctoral scholar, etc.). The survey did not ask for otheridentifying demographic information (gender, ethnicity, discipline, etc.), in order to preserve thementors’ anonymity. Appendix A details the pre-experience survey questions.The focus of the second survey was to understand how mentors actually interacted with theirundergraduate research assistants, including details like how many hours per week, on average,were spent interacting with students and how the mentors provided constructive feedback. Thepost-experience survey also asked mentors to reflect on their own preparation for mentoringundergraduates, and to assess their satisfaction with the summer research

Conference Session

Student Learning, Problem Solving, & Critical Thinking 3

Collection

2014 ASEE Annual Conference & Exposition

Authors

Megan Kenny Feister, Purdue University, West Lafayette; Carla B. Zoltowski, Purdue University, West Lafayette; Patrice Marie Buzzanell, Purdue University, West Lafayette; William C. Oakes, Purdue University, West Lafayette; Qin Zhu, Purdue University

Tagged Divisions

Educational Research and Methods

intogreater detail about, and reflect on, the concepts probed in the individual and team climateinstrument. Participants offered insights into aspects of ethical decision making that were notdirectly present in the instruments, as well as offering a richer description of the often complexteam interactions as the participants experienced them. The interview data offered insight intoboth ethical issues encountered by the individuals and teams, as well as more generalinformation about the team process and how individuals perceived these experiences. As aresult, we found evidence of the categories probed by both the individual and team climateinstrument, as well as new but important aspects of these processes. This paper discusses thefindings about team

Conference Session

Integrating Engineering & Liberal Education

Collection

2014 ASEE Annual Conference & Exposition

Authors

Donna M. Riley, Smith College

Tagged Divisions

Liberal Education/Engineering & Society

because it fails to value ways ofknowing outside positivist empiricism.Biesta26 further argues that Dewey’s theory of knowing can provide an alternative epistemologyfor education research, because it is not based on a dualism between mind and materiality.Instead of separating the self from the knowable world, Dewey conceived an action-theoreticalframework in which ways of knowing are active – they are ways of doing. Biesta notes that forDewey, knowledge is not prescriptive, and research would not dictate practice: “no conclusion ofscientific research can be converted into an immediate rule of educational art” (19).29 Reflexivity(a practice of reflection that is critical of its own power relations) requires integrating knowledgewith reflection and

Conference Session

WIED: Curricular Undergraduate Student Programs

Collection

2014 ASEE Annual Conference & Exposition

Authors

Jaby Mohammed, Petroleum Institute; Nausheen PashaZaidi, The Petroleum Institute

Tagged Divisions

Women in Engineering

features which candifferentiate them from their Western counterparts, including an emphasis oncollectivism, honor, and social stability that emphasizes extended family and tribalrelations (Feghali, 1997; Al-Krenawi, & Graham, 2000). Feghali (1997) addresses someof the general communication patterns that appear in Arab communities, including code-switching from one language to another, flowery rhetoric, indirect speech in relation totopics that reflect social practices, and direct speech when commenting negatively orpositively on personal appearances. She also notes the importance of physical space,which tends to be closer in all-male or all-female situations as contact and touchingbetween genders is considered offensive in public spaces

Conference Session

Teaching and Pedagogy Issues in Graduate Education

Collection

2014 ASEE Annual Conference & Exposition

Authors

Aaron P. Wemhoff, Villanova University

Tagged Divisions

Graduate Studies

to rising seniors given the right circumstances.I. IntroductionIn recent years, the College of Engineering at Villanova University has increased its emphasis ongraduate research programs, thereby supplementing its traditional focus on undergraduateeducation. This is reflected in the increase in externally-funded projects, resulting in a pushtowards developing a nationally-recognized graduate program. The Department of MechanicalEngineering has played a key role in this movement, where the number of Ph.D. graduates hasgrown from the program’s inception approximately 10 years ago to an anticipated 9 graduates in2014.One important element of growing a graduate program lies in the recruiting and retention ofquality graduate students. The

Conference Session

Materials Division Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

William Joseph Stuart P.E., Oregon Institute of Technology; Natalie Rachel Sheffield, Oregon Institute of Technology

Tagged Divisions

Materials

Manufacturing Engineering, American Society of Mechanical Engineers PUBLICATIONS (i)Most Closely Related [1] W.J. Stuart ’Problem Based Case Learning - Composite Materials Course De- velopment – Examples and classroom reflections’ NEW Conference, Oct 2011 [2] W.J. Stuart and Bedard R. (EPRI) ’Ocean Renewable Energy Course Evolution and Status’ presented at Energy Ocean Pacific & Oregon Wave Energy Trust Conference, Sept. 2010. [3] W.J. Stuart, Wave energy 101, presented at Ore- gon Wave Energy Symposium, Newport, OR, Sept. 2009. [4] W.J. Stuart, Corrosion considerations when designing with exotic metals and advanced composites, presented at Corrosion Conference of Exotic Met- als, Park City, UT, 2009. [5] W.J

Conference Session

Methodological & Theoretical Contributions to Engineering Education 3

Collection

2014 ASEE Annual Conference & Exposition

Authors

Alice L Pawley, Purdue University, West Lafayette; Canek Moises Luna Phillips, Purdue University, West Lafayette

Tagged Divisions

Educational Research and Methods

represent aspects of the social the right names? reality observed? Theoretical validation: Do the The research process needs to be Interpretations need to reflect the concepts and relationships of the able to capture the full extent of the coherence and complexity of the theory appropriately correspond social reality studied. social reality under investigation. to the social reality under investigation? Procedural validation: Which Strategies need to be implemented Processes need to be implemented features of the research design in the research design to mitigate to mitigate risks of mis

Conference Session

Design Realization

Collection

2014 ASEE Annual Conference & Exposition

Authors

Paul O. Leisher, Rose-Hulman Institute of Technology; Scott Kirkpatrick, Rose-Hulman Institute of Technology; Richard W. Liptak, Rose-Hulman Institute of Technology; Sergio Granieri, Rose-Hulman Institute of Technology; Robert M. Bunch, Rose-Hulman Institute of Technology

Tagged Divisions

Design in Engineering Education

where they must reflect upon the choices made in the designprocess and what they could have done to improve their outcome relative to the winning team.We have found this activity to be highly reusable; for example, by simply adjusting thedesignated costs or earning per widget, a previous winning design can be rendered ineffectivegiven the new constraints. Further, this activity is a pedagogical approach that is not discipline-specific; we expect that it is well suited for students in all engineering fields. Page 24.149.22. Motivation & BackgroundDesign for manufacturability (DFM) is the practice of engineering products such that they aremore easily produced in volume [1-3]. Nearly 70% of the cost to manufacture a

Conference Session

K-12 and Pre-college Engineering Curriculum and Programming Resources, Part 1 of 2

Collection

2014 ASEE Annual Conference & Exposition

Authors

Pamalee A. Brady, California Polytechnic State University; James B. Guthrie, California Polytechnic State University

Tagged Divisions

K-12 & Pre-College Engineering

theirstudents. Each class had between 21 and 31 students; a total of 76 students participated in theclassroom activities. The survey, developed by the teacher candidates, reflected their desire tofocus on a few math learning objectives in relation to the work of engineers. Pre-survey resultsshowed that overall students could identify the tasks an engineer performs, but did notunderstand the tools they would use to do their work. About half of the students surveyedunderstood that to become an engineer one needed college education. Most students did nothave a good understanding of proportion or what a scale drawing was.With an understanding of the students’ knowledge lessons were structured as 50 minute modulesthat strove to: 1) develop the elementary

Conference Session

Materials Division Technical Session 1

Collection

2014 ASEE Annual Conference & Exposition

Authors

Yakov E. Cherner, ATEL, LLC; Maija M. Kuklja, University of Maryland College Park; Alexander Rudy, Institute of Physics and Technology of RAS, Yaroslavl Branch

Tagged Divisions

Materials

, or recommendations expressed in this material are those of the authors anddo not necessarily reflect the views of NSF.References:1. Taher, M. Integration of Computer Simulation into Traditional Lecture-Lab Activities: Impact of Using Computer Simulation on Student Learning in a Technology-Based Course (doctoral dissertation), Northern Illinois University, DeKalb, IL (2009) Page 24.351.10Appendix EXAMPLES OF ONLINE ASSIGNMENTS USING THE VIRTUAL X-RAY EQUIPMENTExperiment #1. Indexing Diffraction DataRun the virtual X-ray diffractometer and record the XRD powder pattern of an unknown cubicmetal

Conference Session

Systems Engineering Division Technical Session 1

Collection

2014 ASEE Annual Conference & Exposition

Authors

Ashley Bernal, Rose-Hulman Institute of Technology; Scott Kirkpatrick, Rose-Hulman Institute of Technology; William D. Schindel, ICTT System Sciences

Tagged Divisions

Systems Engineering

Removes Exchanges heat Track sun Exchanges heat Self-made Copper tubing Aluminum Safety Parabolic interface Still in Progress Reflector 1. Reflective External Water sheet metal Heat Exchanger

Conference Session

Cooperative & Experiential Education Division Technical Session 1

Collection

2014 ASEE Annual Conference & Exposition

Authors

Joy Watson, University of Cincinnati; Maureen G. Schomaker, University of Cincinnati

Tagged Divisions

Cooperative & Experiential Education

site visit about three-fourths of the waythrough the co-op semester with the student and their direct supervisor. The advisor gives aletter grade for each co-op semester, which is a 3 credit class. At a different university,students complete a self-evaluation of their co-op term, the employer completes anevaluation of the co-op term. A faculty member completes a one on one evaluation of theco-op term with the student utilizing reflective practice. Cates and Cedercreutz cite thefollowing guiding principles as the key foundational concepts of co-op:  Company selection of co-op students as employees (not placement in positions by the university  A sequential training environment in which students come to understand theory

Conference Session

K-12 and Pre-College Engineering Division Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

Evan C. Lemley, University of Central Oklahoma; Bob Melton, Putnam City Schools; Elizabeth Ann Allan, University of Central Oklahoma; Grant M. Armstrong, University of Central Oklahoma ; James E. Stewart, University of Central Oklahoma; Morshed Khandaker, University of Central Oklahoma

Tagged Divisions

K-12 & Pre-College Engineering

 assigns performance expectations for eachDCI at each grade level: elementary school (ES), middle school (MS), and high school (HS).  Theperformance expectations are the way in which the Framework [5] proposes to integrate SEPinto the classroom.  Even though the NGSS are science standards, the Framework makes it clear thatengineering and technology practices “... are featured alongside the natural sciences for two criticalreasons: (1) to reflect the importance of understanding the human­built world and (2) to recognize thevalue of better integrating the teaching and learning of science, engineering, and technology.”2  So theNGSS reflects this integration and places engineering and engineering design as central to learningscience in K­12

Conference Session

NSF Grantees’ Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

James Logan Oplinger, Arizona State University; Andrew Michael Heiman; Matthew Dickens, Arizona State University; Chrissy Hobson Foster, Arizona State University; Shawn S. Jordan, Arizona State University, Polytechnic campus; Micah Lande, Arizona State University, Polytechnic campus

Tagged Topics

NSF Grantees Poster Session

Tagged Divisions

Division Experimentation & Lab-Oriented Studies

howthey view their trade--“making”--and engineering. Hacker and hobbyist appeared several timesin context of making and the maker movement. Makers often referred to engineering asprofessional or single-output or similar phrases. Despite this a common theme of building andinnovating was expressed in both descriptions. It would seem that the means of making andengineering differ but the general goal overlaps. The following methods describe in further depththe results and analysis of the respondents. Page 24.881.2Makers Reflecting About MakersThe definition of Making was captured via an ad-hoc approach at the September 2013 WorldMaker Faire New York2

Conference Session

Research in Biomedical Pedagogy

Collection

2014 ASEE Annual Conference & Exposition

Authors

Jennifer Rae Papich; Christian James Kennett, Gannon University; Davide Piovesan, Gannon University

Tagged Divisions

Biomedical

a stroboscopic infraredlight. Each marker placed on the subject transmits a signal with a different frequency that is Page 24.956.2recorded by a set of infrared cameras. This allows the system to recognize each marker andavoids accidental swapping if markers’ projections on the plane of the camera become too closeto each other. To describe the markers’ trajectory in the Cartesian space the position of themarkers is triangulated using the acquisition of different cameras. In passive system activemarkers placed on the subject are replaced with reflective dots. The reflection of the dots istracked in the visible spectrum by a set of video

Conference Session

NSF Grantees’ Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

Rebecca A. Atadero, Colorado State University; Meena M. Balgopal, Colorado State University; Karen E Rambo-Hernandez, Colorado State University; Anne Marie Aramati Casper, Colorado State University

Tagged Topics

NSF Grantees Poster Session

Tagged Divisions

Division Experimentation & Lab-Oriented Studies

: the assignment is driven by a motivating problem to be addressed and requires somekind of end product, be it a report, presentation or physical artifact 2. Other commoncharacteristics of projects are students working in teams3 and the greater emphasis on theapplication, rather than acquisition, of knowledge4.Projects are a natural fit for engineering education because they reflect professional practice andprovide an opportunity for students to develop the teamwork and communication skills they willneed5. Furthermore, the broader use of projects in engineering curricula is compatible withrecommendations for improving engineering education, such as including design early in thecurriculum6. Projects are also reported to improve student

Conference Session

Manufacturing and Machine Component Design

Collection

2014 ASEE Annual Conference & Exposition

Authors

Steven W. Beyerlein, University of Idaho, Moscow; Edwin M. Odom, University of Idaho, Moscow; Jay Patrick McCormack, Rose-Hulman Institute of Technology; Dan Cordon, University of Idaho, Moscow

Tagged Divisions

Mechanical Engineering

multitude of design artifacts and associatedlearning objects into interactive, museum-like exhibits that can mediate situated learning in thedesign suite, in the machine shop, and amidst a gallery of capstone project posters. This paperreports on initial efforts to implement such a system in support of just-in-time project learning.The system is uniquely designed to operate within our design environment. It has evolved overthe last two decades to reflect shared beliefs about design pedagogy and product realization. Page 24.1060.2Educational SettingOur inter-disciplinary capstone design program has been a catalyst for local design

Conference Session

K-12 and Pre-College Engineering Division Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

Tess Anne Hegedus, The University of North Carolina, Greensboro; Heidi B. Carlone, The University of North Carolina, Greensboro; Aundrea D. Carter, University of North Carolina, Greensboro

Tagged Divisions

K-12 & Pre-College Engineering

a comparison point in the post-implementation interview for thecultural production of smart in an engineering context.The post-implementation teacher interview consisted of a similar line of questioning to get at theteachers’ and students’ experiences with the engineering curriculum. We asked teachers abouttheir perceptions of students’ successes and difficulties during the unit in light of student learningand engagement. Teachers were asked to reflect on any surprises or unexpected outcomes duringimplementation. Additionally, we wanted to understand teachers’ perceptions of possible uniqueaffordances of the engineering unit regarding students’ performances, engagement, and learning.Thus, we asked them to make comparisons of typical student

Conference Session

Capstone and Online Courses in Construction Education

Collection

2014 ASEE Annual Conference & Exposition

Authors

Carol L. Considine, Old Dominion University; Michael W. Seek, Old Dominion University; Jon Lester, Old Dominion University

Tagged Divisions

Construction

be open-minded about sharing their life, work andeducational experiences. Visual barriers that hinder some students are eliminated, and studentshave time to reflect in preparation of written responses. Since most course correspondence is bywriting, students must be able to communicate clearly through writing. Students need to be self-motivated and self-disciplined to stay on schedule with the course materials and assignments.When they have problems with the course content or assignments, they need to speak up.Instructors are not able to recognize student problems from visual interactions and cannot help ifthey are not notified of problems. Students need to recognize that they are responsible for theirlearning and need to be proactive. On

Conference Session

Engineering Libraries Division Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

Adeel Khalid, Southern Polytechnic State University ; Mir M. Atiqullah, Kennesaw State University; Rajnish Singh, Southern Polytechnic State University; Beth Stutzmann, Southern Polytechnic State University

Tagged Divisions

Engineering Libraries

24.1183.8it could also reflect the availability of graduate level texts as ebooks. As return on investment bythe publishers in ebook heavily depends on volume sales, graduate level sales of textbookscannot match those at undergraduate levels thus limiting incentives.The survey results can be used to observe differences between students by major. The groupingsof majors are by schools at SPSU, with the exception that Construction Management is in thesame school as Architecture at SPSU, but is grouped with Engineering Technology andManagement for the purposes of this analysis. Figure 3 shows how the type of book acquiredvaries with major (without regard to what form of book). Figure 3: Form of book acquired by major.It can be

Conference Session

Impact of Community Engagement on Students

Collection

2014 ASEE Annual Conference & Exposition

Authors

Hoda Baytiyeh, American University of Beirut (Beirut)

Tagged Divisions

Community Engagement Division

% Table 1: Participants’ DemographicsEarthquake Hazard Awareness among ParticipantsBased on participants’ responses, engineering students in Lebanon possess satisfactory level ofearthquake risk awareness. Table 2 illustrates such knowledge regarding the seismic riskinvolved. According to the majority (83%) of participants, the school system in Lebanon has notcontributed to their knowledge and awareness regarding earthquakes. Such fact reflects adeficiency of school programs in Lebanon in covering and highlighting the risk of earthquakes.The lack of such necessary education has direct contribution to the existing seismic vulnerabilityof the Lebanese communities to seismic hazards. Also, it was shown that television did not helpstudents in

Conference Session

Sustainability

Collection

2014 ASEE Annual Conference & Exposition

Authors

Julia M. Williams, Rose-Hulman Institute of Technology; Caroline Carvill, Rose-Hulman Institute of Technology; Richard A. House, Rose-Hulman Institute of Technology; Jessica Livingston, Rose-Hulman Institute of Technology; Anneliese Watt, Rose-Hulman Institute of Technology

Tagged Divisions

Liberal Education/Engineering & Society, Multidisciplinary Engineering

content andtechnical content together in ways that are manageable by faculty who are not engineers. Thecourse in professional and technical writing at our college is required of all engineering andcomputer science majors and is usually taken in the junior year. The course has undergone manytransformations in content and focus since it was first developed in 1994. The latest iterationblends communication principles with technical projects that can bridge the divide and helpstudents see how the two fields are intricately intertwined in the engineering workplace.This paper reflects on the work-in-progress at Rose-Hulman focused on helping our studentsdevelop their communication skills in technical contexts. Currently five faculty are

Conference Session

Measuring Impact: Libraries, Librarians, Instruction, and Institutions

Collection

2014 ASEE Annual Conference & Exposition

Authors

David Matthew Markowitz, Cornell University; Jill H. Powell, Cornell University; Jeffrey T. Hancock, Cornell University

Tagged Divisions

Engineering Libraries

associated with deception can be revealed in language. For example,compared to honest language, deceptive language tends to feature an increase of negativeemotion terms (e.g., hate, aggression, hurt) as a reflection of the guilty or anxiety associated withlying.9 Many of our social relationships are built on honesty, and deception has the potential tojeopardize interpersonal trust. Therefore, it becomes distressing to lie to a friend or colleague,and an increase of negative emotions reflects this apprehension.9,13,17 Deceptive speech alsotends to feature fewer first-person singular pronouns (e.g., I, me) as a mechanism ofpsychological distancing. Liars typically distance themselves from deceit by using fewer “I-words” and increasing the number of

Conference Session

Civil Engineering Division Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

James L. Hanson PE, California Polytechnic State University

Tagged Divisions

Civil Engineering

reviews). Students were encouraged tomark manuscripts directly with comments and provide a separate summary of their review.Copies of the reviews were provided to the authors anonymously. The review from the instructorwas apparent as it was more thorough, generally more critical, and contained both familiarpenmanship and a numerical score for the draft paper. The authors had approximately 1 week tomodify their papers to incorporate changes recommended during the review process. Studentswere required to provide a brief response to reviewers (a point-by-point response was notrequired, simply a statement related to reflection on reviewer recommendations versusmodifications made to the paper). Final papers were due 1 day prior to the oral

Conference Session

Innovative Use of Technology and the Internet in Engineering Education

Collection

2014 ASEE Annual Conference & Exposition

Authors

Edward J. Berger, University of Virginia; Edward Pan, University of Virginia; Amy Orange, University of Houston-Clear Lake; Walter Fredrick Heinecke, University of Virginia

Tagged Divisions

Educational Research and Methods

support learning. We donot consider the full spectrum of social media tools, nor do we focus on the most current (forinstance, twitter). The origins of this study were shaped by the most rapidly-maturingtechnologies of the late 2000’s, as well as those that appeared to offer the highest relativeadvantage compared to other technologies (see the diffusion of innovations discussion below).These rapidly-maturing technologies are blogging and video, and both lend themselves tosubstantial user-generated content.The scholarship on blogging as an educational tool continues to emerge. Much recent work hasfocused on the use of blogs for reflective, self-expressive, peer critique, or highly-individualizedauthoring, and in many cases each student in a class

Conference Session

Engineering Leadership Development Constituent Committee Division Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

Taylor Robert Smith, Brigham Young University; Rollin H. Hotchkiss P.E.,D.WRE, F.ASCE, Brigham Young University

Tagged Divisions

Engineering Leadership Development Division

self-awareness are self-reflection (internal) andfeedback from others (external). Although introspection may provide some self-knowledge,relying too heavily on oneself can be problematic.5 Harris articulated this well when he stated: In order to know oneself, no amount of introspection or self-examination will suffice. You can analyze yourself for weeks, or meditate for months, and you will not get an inch further – any more than you can smell your own breath or laugh when you tickle yourself.6On the other hand, receiving feedback from others is the most effective way to attain self-awareness.1,2,3,5 This is because "others" make their observations from a more objective position,and likely have more factual insight

Conference Session

Engineering Leadership Development Constituent Committee Division Technical Session 1

Collection

2014 ASEE Annual Conference & Exposition

Authors

Ella Lee Ingram, Rose-Hulman Institute of Technology; Richard A. House, Rose-Hulman Institute of Technology; Steve Chenoweth, Rose-Hulman Institute of Technology; Kay C. Dee, Rose-Hulman Institute of Technology; Jameel Ahmed, Rose-Hulman Institute of Technology; Julia M. Williams, Rose-Hulman Institute of Technology; Craig G. Downing, Rose-Hulman Institute of Technology; Donald E. Richards, Rose-Hulman Institute of Technology

Tagged Divisions

Engineering Leadership Development Division

nearly 200 reports of STEM change, they found that the combination of emergentoutcomes and institutional focus (a category they call “Developing: Shared Vision”) was theleast described. This observation revealed a key question for the MACH development team: per-haps the absence of emerging systemic change in STEM education reflects pervasive error inchange agents’ chosen focus and intended outcome. Borrego et al. agree in part with this conclu-sion—they found that diffusion of innovation required “plans that promote transitions to stagesof adoption beyond awareness” (pg. 202)2 and a focus on stakeholders rather than on a specificactivity to be implemented. In designing our workshop, we decided to help faculty and adminis-trators develop shared