visualization of the first method whileFigure 4(b) shows the second method. In Figure 5 (a) and (b), the red torque-speed curve is thewound-rotor induction motor and the blue is the squirrel-cage induction machine. In theapplication of this new testing method, the second approach was used as the machine under-testwas the wound-rotor induction machine.As can be seen in Figure 5(b), this movement of torque-speed curves results in two uniqueintersection points – one in the stable region and one in the un-stable region of the torque-speedcurves. The unique intersection points in the stable region, from here on referred to as the stablepoint, is utilized for measurements. The stable point provides current, voltage, power input, andspeed in rpm. From these
faculty expressed and interest to expand their educational efforts in this area, but do nothave a clear understanding of how to do so. This paper attempts to document some of those keyelements in the efforts to create, organize and carry out the work efforts required for thesuccessful implementation of this Li-ion cell assembly, testing and characterization effort.2) Background: Between 1976 and 1986, John B. Goodenough developed the theoretical basis and basicoperational characteristics of a Li-ion battery. Later in the 1980s, he comprehensively developedthe Li-ion battery [2]. Li-ion battery technology was quickly embraced and in 1991 Sony Co.employed the first Li-ion battery system in a commercial product [3]. Since the early 2000
the operation of the electrical power systemin Dominican Republic were used for the simulations in cybersecurity. Some data points weremodified to model an attack condition in the electrical system. MATLAB classification learnertool was utilized to run the simulation. The classifier will train the network. The predictors arethe electrical line current for each phase (A, B, C), the electrical line voltage for each phase (A,B, C) and the energy consumption in kWh. The network is a classification tree type. At the endthe MATLAB tool classify test data into one of two scenarios defined as attack and normaloperation. The step-by-step process of data processing is presented in the appendix A of thispaper.2.3 Methodology for Optimization
m Po sy er N er ri d Si w LE er w Po B/ G w Po SI LAPo Ig AT D M (a) 5 Excellent 4 Average 3 2 Poor
Paper ID #40149Strategic Outreach for Nuclear Workforce Pipeline Development andMaintenance at a Historically Black College University (HBCU)Dr. Antony Kinyua, Morgan State University Dr Kinyua is an Associate Professor of Nuclear Science and currently affiliated to the Physics and En- gineering Physics Department at Morgan State University (MSU) as a Lecturer. He teaches Physics, Engineering Physics and Earth Sciences. He has more than 30 years experience in College teaching and research utilizing Nuclear and Related Analytical Techniques (NRATs) in material analysis, climate and environmental pollution monitoring.Ezana
requirements engineers: An exploration of RE jobs in Canada," in Proceedings of the 12th ACM/IEEE International Symposium on Empirical Software Engineering and Measurement, 2018, pp. 1-10.[14] C. Wang, Y. Tang, P. Liang, M. Daneva, and M. van Sinderen, "What industry wants from requirements engineers in China? An exploratory and comparative study on RE job ads," in Proceedings of the 14th ACM/IEEE International Symposium on Empirical Software Engineering and Measurement (ESEM), 2020, pp. 1-11.[15] A. Ward, B. Baruah, A. Gbadebo, and N. Jackson, "What do job adverts tell Higher Education about the ‘shape’of Biomedical Engineering graduates?," in International Conference on Advancements of Medicine and
Paper ID #39511Board 91: Work-in-Progress: A Systematic Gap Analysis of the AustralianPower Engineering CurriculumMiss Nisaka Munasinghe, University of New South Wales Nisaka Munasinghe is an enthusiastic undergraduate student at the University of New South Wales. She will be graduating with a Bachelor of Electrical Engineering (Hons), 2023, with her thesis project present- ing research for improvements to the Australian Power Engineering Curriculum. Since 2020, she has been working in construction as a cadet engineer with Sydney Trains, helping deliver and commission railway signalling projects for the NSW transport
each harmonic.References[1] Duell, T., Muehlbauer, M., Seitzinger, T., Westfall, J., & Rashidi, R. (2018, September).MEMS capacitive sensor for wound monitoring applications. In IOP conference series: materialsscience and engineering (Vol. 417, No. 1, p. 012040). IOP Publishing.[2] Mbaye, A., Kreamer, C., Zink, L., Fredenburg, M., & Rashidi, R. (2018, September). 3Dprinted micro check valve for biomedical applications. In IOP Conference Series: MaterialsScience and Engineering (Vol. 417, No. 1, p. 012041). IOP Publishing.[3] Cooke, I., DeClerck, B., Hallett, J., Miller, T., Mitchell, A., & Rashidi, R. (2019, November).A Magnetic and Shape Memory Alloy Actuated Gripper for Surgical Applications. In ASMEInternational Mechanical
Paper ID #37157What makes a solar engineer?Dr. Joseph Ranalli, Pennsylvania State University Hazleton Dr. Joseph Ranalli is an Associate Professor at Penn State Hazleton, teaching in the Alternative Energy and Power Generation Engineering program. He previously earned a BS from Penn State and a PhD from Virginia Tech, both in Mechanical Engineering. His research interests include solar energy and enhancing the use of technology resources in engineering education.Mesude Bayrakci Boz, Pennsylvania State University Hazleton Dr. Mesude Bayrakci Boz is an assistant professor engineering at Penn State Hazleton. She holds mas
Paper ID #39007Efficiency Analysis of a Hybrid Solar System DesignRyan Thomas FlynnCaleb HoldridgeAlexandra MurphyMs. Jacquelyn Autumn Carter Undergraduate electrical engineering student at the United States Coast Guard Academy.Sarah SchollenbergerProf. Tooran Emami Ph.D., United States Coast Guard Academy Tooran Emami is a tenured associate professor of Electrical Engineering in the Department of Electrical Engineering and Computing at the U. S. Coast Guard Academy (USCGA). Her research interests are control and power systems, particularly Proportional Integral Derivative (PID) controller design, robust control, time delay
, "Automated lithology classification from drill core images using convolutional neural networks," Journal of Petroleum Science and Engineering, vol. 197, 2021.[3] M. Liu and T. Mukerji, "Digital transformation in rock physics: Deep learning and data fusion," The Leading Edge, vol. 41, pp. 591-598, 2022.[4] S. Sattarin, T. Muther, A. K. Dahaghi, S. Negahban and B. Bell, "GeoPixAI: From Pixels to Intelligent, Unbiased and Automated Fast Track Subsurface Characterization," in 2021 IEEE International Conference on Imaging Systems and Techniques (IST), Kaohsiung, Taiwan, 2021.[5] J. K. Ali, "Neural Networks: A New Tool for the Petroleum Industry?," in European Petroleum Computer Conference, Aberdeen, United Kingdom, 1994.[6] S
power systems is extremely vital and relevant due to the ongoing efforts tomodernize the grid. The authors are trying to shift from carbon-based energy sources to renewableenergy sources. This requires developing the workforce of the future which can handle thesecontemporary challenges. Two of the most useful tools when it comes to the analysis of electricpower systems are power flow simulation and fault studies. There are simulators that are providedto universities for educational purposes so that students can learn how to run power flowsimulations and use the results for analysis and design. The problem that the authors have observedis that students need a better intuition on how to interpret the results. This leads to studentsaccepting
picture with their specifications. If your chosen gas turbine produces more energy than a pump, you can sell the excess energy to the power companies at a price of $0.13/KWhr. 9) For the selected gas turbine model in point 8) how much power can be generated using the mass flow rate from point 6)? Distinguish the part of the power used by the compressor and the rest coming out of the system to power the pump jack. 10) In point 5) you calculated the efficiency for a pressure ratio of 9, what will be the efficiency of the pressure ratio was 15? 11) Design a 500 MW system to be established in Odessa-Midland region. a) Using regenerative natural gas powered gas turbine and b) combined gas turbine and steam
, “Experiential learning implementation inundergraduate engineering education: A systematic search and review,” Taylor & Francis, 08-Feb-2022.[Online]. Available: https://www.tandfonline.com/doi/full/10.1080/03043797.2022.2031895. [Accessed:20-Jan-2023].[9]“Propeller,” Encyclopædia Britannica. 2019. [Online]. Available:https://www.britannica.com/technology/propeller[10]B. Maheswaran, Y. Guo, A. Hervella, A. Pavlov, and M. D. Dinh, “Water flow generator: Innovatingwater faucet use,” ASEE PEER Document Repository, 09-Jul-2019. [Online]. Available:https://peer.asee.org/water-flow-generator-innovating-water-faucet-use. [Accessed: 13-Apr-2023].[11]B. Maheswaran, A. Bard, A. Sozio, S. Haggans, N. Tarallo, and T. Bennett, “Hydropower from gutters:Generating
also.The project’s relatedness to critical alternative energy topics will be discussed in this sectionalso. In section 3, several course sample projects will be discussed. Section 4 will discuss theassessment outcomes related to the hands-on project. Section 5 presents the conclusions andnext steps. II. Course Development, Objectives, and OutcomesThe course has been designed to provide a foundation to engineering students in several energy-related areas including: (a) Conventional energy source technologies and their promise, advantages, and disadvantages (b) Renewable energy source technologies and their promise, advantages, and disadvantages. (c) A general background in solar energy technologies including solar thermal
Dec. 2022.[7] Engine Power and Torque Curves. images.cdn.circlesix.co/image/still/uploads/posts/2016/08/58863cb65bd5ff6ed7edb03f4 1 9b51c6.gif.[8] Typical Electric Motor Torque & Power Curves. images.theconversation.com/files/269180/original/file-20190414-76843- 99pwbb.png?ixli b=rb-1.1.0&q=45&auto=format&w=754&fit=clip.[9] yashastronomy. "Arduino based RPM counter with a new and faster algorithm." Arduino Project Hub, 30 Apr. 2020, create.arduino.cc/projecthub/yashastronomy/arduino-based-rpm-counter-with-a-new- and- faster-algorithm-3af9f3.Appendix 1: Data Collection and Analysis [4]
under varying wind conditions, generator power output. Figure 8: (a) Virtual Reality Wind Turbine Module (b)Proposed data flow diagram for wind turbine simulations.Assessment of the VRLE platformThe preliminary assessment of the module was performed by our partner institution at University ofTexas at El-Paso, on a sample of 31 graduate students with a diverse background and majors, fromindustrial engineering, mechanical and manufacturing engineering, and systems engineering according toFigure 9 below. However, only 15 students completed the entire trial and the survey, therefore all ourresults are presented based only on the limited number of surveys. It is to be noted that out of 15 students,the vast majority (89
Paper ID #39253Making Electric Machinery Labs Easier to GradeDr. Glenn T. Wrate P.E., Northern Michigan University Dr. Wrate returned to his boyhood home and began teaching at Northern Michigan University in 2014. He was promoted to full professor in 2016 and tenured in 2018. He is a member of HKN and IEEE and is a past chair of the Energy Conversion and Conservation Division of ASEE ©American Society for Engineering Education, 2023 Making Electric Machinery Labs Easier to GradeAbstractThe best way to teach electric machinery is with hands-on labs. At the beginning of the Fall2020 semester
Paper ID #37748Power Generation Using the BayousDr. Mahmud Hasan, University of Houston-Downtown Strong and diverse teaching, research, industry, and service (department, college, university, and commu- nity level) experience in innovative safety environments. Worked in different multinational engineering companies: McDermott International, Inc., Genesis Oil and Gas (Technip USA Inc.), and Shahjibazar Gas Turbine Power Plant. A licensed Certified Safety Professional (CSP) and Professional Engineer (PE) from two states (Texas and Louisiana). Evidence of scholarship as demonstrated by national and/or inter- national
Paper ID #37170Adapting Capstone Design for the Solar District Cup CompetitionDr. Joseph Ranalli, Pennsylvania State University Hazleton Dr. Joseph Ranalli is an Associate Professor at Penn State Hazleton, teaching in the Alternative Energy and Power Generation Engineering program. He previously earned a BS from Penn State and a PhD from Virginia Tech, both in Mechanical Engineering. His research interests include solar energy and enhancing the use of technology resources in engineering education. ©American Society for Engineering Education, 2023 Adapting Capstone Design for the Solar District
Paper ID #38144Online Labs and DEI in Introduction to Thermodynamics CourseDr. Teodora Rutar Shuman, Seattle University Professor Teodora Rutar Shuman is the Chair of the Mechanical Engineering Department at Seattle Uni- versity. She is the PI on the NSF RED grant titled ”IUSE/PFE:RED: Revolutionizing Engineering Educa- tion through Industry Immersion and a Focus on Identity.” Her research also includes NOx formation in lean-premixed combustion and electro-mechanical systems for sustainable processing of microalgae. Her work is published in venues including the Journal of Engineering Education, IEEE Transactions on Ed