Conference Session

ECE Poster Session

Collection

2008 Annual Conference & Exposition

Authors

Rosemarie Guzman, University of the Pacific; Michael Golanbari, University of the Pacific

Tagged Divisions

Electrical and Computer

AC 2008-103: ENHANCING ONE STUDENTS’ DESIGN SKILLS IN ANELECTRICAL ENGINEERING CAPSTONE SENIOR DESIGN PROJECT BYLEARNING FROM THE DESIGN AND HARDWARE CONSTRUCTION OF ANANNUNCIATORRosemarie Guzman, University of the Pacific Rosemarie Guzman is a an undergraduate electrical engineering student (senior standing) at the Dept. of Electrical and Computer Engineering, School of Engineering and Comptuer Science, University of the Pacific, Stockton, CA, USA. Her research interests span a wide range of topics in electrical engineering, with special emphasis on the design and development of various instruments for practical applications.Michael Golanbari, University of the Pacific Michael Golanbari received

Conference Session

Teaching and Assessing Sustainability and Life Long Learning

Collection

2013 ASEE Annual Conference & Exposition

Authors

Mary Katherine Watson, Georgia Institute of Technology; Elise M. Barrella, James Madison University; Thomas A. Wall, Georgia Institute of Technology; Caroline R. Noyes, Georgia Institute of Technology; Michael O. Rodgers, Georgia Institute of Technology

Tagged Divisions

Civil Engineering

for capturing the extent to which studentsengage in sustainable design are not currently available. Given that the ultimate goal ofsustainable engineering education is to train engineers to incorporate sustainabilityconsiderations into their professional practices, it is critical that a tool be developed to evaluatesustainable design skills.Study OutlineThe goal of this study is to develop and apply a sustainable design rubric that can be used toevaluate student abilities to incorporate sustainability principles into capstone design projects.Specifically, the rubric was designed to answer the following research questions: (1) What arethe expectations related to sustainable design for student projects? (2) To what extent dostudents actually

Conference Session

Emerging Trends in Engineering Education Poster Session

Collection

2005 Annual Conference

Authors

Steven Northrup

A Need for Developing Continuous Improvement Plans for Capstone Project Management – Both Students and Faculty will Benefit Steven G. Northrup Western New England College snorthru@wnec.eduAbstractOne of the most important shifts in engineering education, brought about by the adoption of theAccreditation Board for Engineering and Technology’s (ABET’s ) Engineering Criteria 2000, isthe framework of continuous improvement. Department-level self-evaluation narratives addressusing feedback to monitor and improve the education process and thereby improve the students’learning outcomes

Collection

2001 Annual Conference

Authors

Herbert Hess

Session 1333 Cost-Tailored Load Management for Power Quality in an Independent Power System as an Interdisciplinary Capstone Design Project Herbert L. Hess Electrical and Compute Engineering University of Idaho Moscow, IdahoAbstract An interdisciplinary undergraduate design team redesigns and builds a hybrid windpower-fossil fuel generation facility that provides electricity and water for an environmentally sensitivewilderness location. Students first develop objectives for quantity of power

Conference Session

Trends in Mechanical Engineering

Collection

2002 Annual Conference

Authors

Brooks Byam

Session 1566 An Enhanced Educational Experience for Capstone Design Projects: Using SAE Student Groups in An Industry Sponsor Role Brooks P. Byam Department of Mechanical Engineering Saginaw Valley State UniversityAbstract The Mechanical Engineering Department at Saginaw Valley State University (SVSU) isenhancing the educational experience of students by using Society of Automotive Engineers (SAE)student groups in the role of industry sponsor for capstone design projects. In many engineeringprograms, industry sponsors are used as a

Conference Session

Graduate Studies Division (GSD) Technical Session 6: Programs in Graduate Education

Collection

2024 ASEE Annual Conference & Exposition

Authors

Bharani Nagarathnam, Texas A&M University; Bimal P. Nepal, Texas A&M University; Malini Natarajarathinam, Texas A&M University; Kourtney Rogers Gruner, Texas A&M University

Tagged Divisions

Graduate Studies Division (GSD)

Paper ID #42435Applied Capstone Project for Working Professionals: A Decade of Experiencesin Design, Execution, and Creating Value for EmployersDr. Bharani Nagarathnam, Texas A&M University Dr. Bharani Nagarathnam is an Associate Professor of Instruction and Associate Director of Master of Industrial Distribution program at the Department of Engineering Technology & Industrial Distribution at Texas A&M University. He is the co-founder of the Talent Development Council that works with Distributions on Talent acquisition, management, and development practices. He teaches graduate and undergraduate courses in

Collection

1999 Annual Conference

Authors

Matt C. Smith; David K. Gattie

“Session 1608" A Multi-disciplinary Fifth-Year Certification Program in Water Resources for Biological and Agricultural Engineering Students With a Capstone Interdisciplinary Project Course Matt C. Smith, David K. Gattie Department of Biological and Agricultural Engineering University of GeorgiaAbstractThe Biological and Agricultural Engineering Department at the University of Georgia is movingtoward a fifth-year certification program in water resources designed to broaden engineeringstudents’ basic science backgrounds and foster the

Conference Session

Teams and Teamwork in Design

Collection

2011 ASEE Annual Conference & Exposition

Authors

Rob O. Hovsapian, Florida State Univeristy ; Chiang Shih, Florida A&M University/Florida State University; Bruce A. Harvey, Florida A&M University/Florida State University, College of Engineering; Okenwa I. Okoli, Florida A&M University/Florida State University

Tagged Divisions

Design in Engineering Education

AC 2011-1665: AN OVERVIEW OF OUR EXPERIENCE INTEGRATINGMULTIDISCIPLINARY AND INTERNATIONAL DESIGN PROJECTS WITHINTHE SENIOR CAPSTONE DESIGN COURSERob O. Hovsapian, Florida State Univeristy Dr. Hovsapian spent almost 15 years working for General Dynamics, TRW and Northrop Grumman. Currently he serves as an associate scholar scientist / faculty, instructor of record for the senior capstone design course, for the Mechanical Engineering department and a program manager at the Center for Advanced Power Systems for the Electric Ship Research and Development Consortium (ESRDC) for the Office of Naval Research. He has been responsible for the successful establishment /deployment of several flexible manufacturing facilities

Collection

2024 South East Section Meeting

Authors

Paul Forsberg; David A. Guerra-Zubiaga, Kennesaw State University; Fadi Hantouli; Amin Esmaeili, Kennesaw State University; Griselda Quiroz-Compean

Tagged Topics

Diversity

. Dr. Guerra-Zubiaga is associate editor (North America) for the International Journal of Computer Integrated Manufacturing since 2011. He has been a topic organizer for ASME-IMECE since 2017 at the advanced manufacturing track. Today Dr. Guerra-Zubiaga is an Associate Professor in the Robotics and Mechatronics Engineering Department at Kennesaw State University.Fadi HantouliAmin Esmaeili, Kennesaw State UniversityGriselda Quiroz-Compean ©American Society for Engineering Education, 2024 Robotics and Mechatronics Engineering Framework to Develop a Multidisciplinary Senior Capstone Design Project: A Biomedical Mechatronics Engineering Case Study

Conference Session

Best of DEED

Collection

2014 ASEE Annual Conference & Exposition

Authors

R. Keith Stanfill, University of Florida; Amy Rigby, www.amywriting.com; Maureen Milch, University of Florida

Tagged Divisions

Design in Engineering Education

Paper ID #10569The Professional Guide: A Resource for Preparing Capstone Design Studentsto Function Effectively on Industry-sponsored Project TeamsDr. R. Keith Stanfill, University of Florida B.S., M.E., and Ph.D. degree in mechanical engineering University of Florida Dr. R. Keith Stanfill is the Director of the Integrated Product and Process Design Program and an Engineer for the Department of Industrial and Systems Engineering. His interests include technology transfer, entrepreneurship, product development, design education and Design for X. Dr. Stanfill has over ten years’ industrial experience with United

Collection

2024 CIEC

Authors

Ahmad Fayed; Mohamed Zeidan; Ephraim Massawe; Mehmet Bahadir

ETD 435 Embedding Standards in Engineering and Related Academic Programs: A Case Study of Senior Design and Capstone Projects Ahmad Fayed, Mohamed Zeidan, Ephraim Massawe, Mehmet Bahadir Southeastern Louisiana University1. AbstractIn a multidisciplinary Industrial and Engineering Technology (IET) Department with multiplesubprograms including Engineering Technology (ET), Industrial Technology (IT), andOccupational Safety, Health and Environment (OSHE) programs, it is not possible to cover thedetailed theory and applications of all high-level classes as in a

Conference Session

WIP: Student Success and Sustainability

Collection

2024 ASEE Annual Conference & Exposition

Authors

Chris Barr, University of Michigan; Taylor Ashley Dotto, University of Michigan; Joseph Gilbert Restivo, University of Michigan; Christina Said, University of Michigan; Rinrada Watchara, University of Michigan; Laura Hirshfield, University of Michigan; Elaine C Wisniewski, University of Michigan; Xiaoxia Nina Lin, University of Michigan

Tagged Topics

Diversity

Tagged Divisions

Chemical Engineering Division (ChED)

Paper ID #41378Work in Progress: Implementation of a Curricular Development Project forExperiential Learning in a Senior Capstone Product-Design CourseDr. Chris Barr, University of Michigan Dr. Christopher Barr is the Instructional Laboratory Supervisor in the Chemical Engineering Department at University of Michigan. He obtained his Ph.D. at University of Toledo in 2013 and is a former Fellow in the N.S.F. GK-12 grant ”Graduate Teaching Fellows in STEM High School Education: An Environmental Science Learning Community at the Land-Lake Ecosystem Interface”. His main responsibilities are supervising and implementing

Collection

2015 Northeast Section Meeting

Authors

Jeffrey R. Mountain

2015 ASEE Northeast Section Conference Capstone Project Selection and Evaluation Processes: More Fair for the Students and Easier for the ABET Evaluator Jeffrey R. Mountain Norwich UniversityAbstractWhile the specific focus of an ABET on site evaluation of student outcomes may vary year toyear, design outcome assessment (ABET c) tends to always be under scrutiny. Searching forevidence of addressing realistic constraints, as well as meeting any discipline specific programrequirements, can be a time consuming process for the evaluator, particularly if the capstonesequence spans two or more semesters. Capstone

Conference Session

Professional Papers

Collection

2025 ASEE Southeast Conference

Authors

Rebekah L Martin, Virginia Military Institute; Kacie Caple D'Alessandro, Virginia Military Institute; Charles D Newhouse P.E., Virginia Military Institute; Tanjina Afrin, Virginia Military Institute

Tagged Topics

Professional Papers

Capstone Projects in Virginia Civil Engineering Programs: A Comprehensive Review of Practices and an Assessment of Virginia Military Institute’s OutcomesAbstractCapstone projects serve as a vital bridge between academic theory and real-world application,equipping students with the skills necessary for professional success. Each university implementscapstone projects in Civil Engineering (CE) using different styles, types of projects, and lengthsof their capstone course. A survey of CE programs in Virginia was performed to gather infor-mation on Capstone courses. In addition to comparing CE programs across Virginia, this paperexamines the capstone course at Virginia Military Institute (VMI), an institution that blends

Conference Session

ETD Design II

Collection

2012 ASEE Annual Conference & Exposition

Authors

John L. Irwin, Michigan Technological University; David Wanless, Michigan Technological University; Paul Sanders, Michigan Technological University; Scott W. Wagner, Michigan Technological University

Tagged Divisions

Engineering Technology

ProjectsEngineering Technology Education NeedsBoth engineering and engineering technology (ET) accredited bachelor degree programs requirea capstone project or cooperative education experience for students to apply their technicalknowledge in real world situations. The Association of Technology, Management, and AppliedEducation (ATMAE) organization in its accreditation standards require baccalaureate degreeprograms to include an element of industrial experience as related in the following. “Each program of study shall include appropriate industrial experiences such as industrial tours, work-study options/cooperative education, and/or senior seminars focusing on problem-solving activities related to industry. Industrial experiences shall be

Conference Session

Trends in Constr. Engr. Educ. I

Collection

2002 Annual Conference

Authors

Peter Ridilla; James Pocock

Session 1421 Project-Based Construction Education JAMES B. POCOCK and PETER A. RIDILLA Department of Civil and Environmental Engineering, United States Air Force AcademyIntroduction This paper describes project-based education as applied in two construction managementcourses at the U.S. Air Force Academy. Both courses are for senior-level civil andenvironmental engineering students. One of the courses is a construction management electiveand the other is a required capstone course for students majoring in both civil and

Conference Session

Design for the Environment

Collection

2007 Annual Conference & Exposition

Authors

David McStravick, Rice University

Tagged Divisions

Design in Engineering Education

AC Powered Backpack ProjectAbstractThe human powered backpack1 was developed by four senior mechanical engineering majors atRice University. The backpack was targeted for students in rural third world countries whereelectrical power is rare or non-existent at home. The concept was to have local power foreducational devices available at the student’s home to augment classroom instruction.This project required collecting data from schools in different third world locations to establishthe need. The project was done in the students’ capstone design course and in conjunction withthe Schlumberger Excellence in Educational Development5 (SEED) Foundation. The SEEDprogram provides support to schools in many of the countries where Schlumberger Ltd

Collection

2001 Annual Conference

Authors

Alok Verma

Session 2149 Innovative Student Research Projects Alok K. Verma Old Dominion UniversityI. IntroductionSenior or Capstone project courses are part of majority of the Engineering TechnologyCurriculum. This is partly because of the faculty’s desire to assess student’s ability to apply theknowledge acquired and, partly because of the mandate by the Accreditation Board forEngineering and Technology (ABET). A number of papers have been published on the topic ofsenior projects and the necessity for providing realistic engineering experience 1,2,3

Collection

2001 Annual Conference

Authors

Stanley Pisarski; Beverly Hunter; Kathy Bearden

Session 15470 Senior Project Presentations Beverly J. Hunter, Stanley J. Pisarski, Kathy C. Bearden University of Pittsburgh at JohnstownAbstractThe current paper describes the Senior Project Proposal and Senior Project classes that comprisethe capstone design sequence for Engineering Technology students at the University ofPittsburgh at Johnstown. This design sequence is required for all Civil, Electrical, andMechanical Engineering Technology students. The paper discusses the investigative workrequired prior to undertaking a project design, the types of projects that are

Conference Session

Electrical and Computer Engineering

Collection

2003 Annual Conference

Authors

Ahmet Bugra Koku; Ali Sekmen; Ismail Fidan

Engineering Vanderbilt University Nashville, TN AbstractSenior and Capstone Design Project courses are widely adapted in engineering and computerscience curricula to prepare students for the industry and give them the opportunity to work inreal-world projects. One of the motivations behind offering such courses is to satisfy the ABETcriteria emphasizing the importance of functioning in multi-disciplinary teams. Senior projectcourses in computer science/engineering are usually designed to be one or two semester-long andthey traditionally involve large-scale software systems development. There is also a tendency toassign

Conference Session

Programmatic Issues in Physics or Engineering Phys

Collection

2010 Annual Conference & Exposition

Authors

Evan Lemley, University of Central Oklahoma; Baha Jassemnejad, University of Central Oklahoma; Matthew Mounce, US Navy; Jamie Weber, Parsons; Sudarshan Rai, Unknown; Willy Duffle, University of Central Oklahoma; Jesse Haubrich, University of Central Oklahoma

Tagged Divisions

Engineering Physics & Physics

AC 2010-1861: LINKING SENIOR DESIGN PROJECTS TO RESEARCHPROJECTSEvan Lemley, University of Central OklahomaBaha Jassemnejad, University of Central OklahomaMatthew Mounce, US NavyJamie Weber, ParsonsSudarshan Rai, UnknownWilly Duffle, University of Central OklahomaJesse Haubrich, University of Central OklahomaBahman Taheri, Alphamicron Page 15.845.1© American Society for Engineering Education, 2010 LINKING SENIOR DESIGN PROJECTS TO RESEARCH PROJECTSAbstractSenior design projects form an important capstone for most engineering disciplines and mustconsist of the realistic application of the engineering design process. Some senior engineeringstudents

Conference Session

Multidisciplinary Technical Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

Matthew Dettman P.E., Western Kentucky University; Walter L. Collett, Western Kentucky University

Tagged Divisions

Multidisciplinary Engineering

single project, these barriers can beminimized, allowing students who were formerly segregated by classes to work together as acohesive unit to solve a problem.During the 2009-2010 academic year, students from the Electrical Engineering program workedwith a Civil Engineering Capstone Design team on the latter’s senior project. During the yearlong project, team meetings were held, requiring the students from each discipline to worktogether, share information, understand what the others were doing, and ultimately complete theproject successfully. Upon completion, students were asked to reflect on their experience andwhat they gained from it. This paper presents the project the students were engaged in, theassessment of the outcomes, and some of

Conference Session

Capstone Design II

Collection

2007 Annual Conference & Exposition

Authors

Stephen Laguette, University of California-Santa Barbara

Tagged Divisions

Design in Engineering Education

advisor to tackle aMechanical Engineering design project. Engineering communication, such as reports and oralpresentations are covered. The course emphasizes a practical, hands-on experience, andintegrates analytical and design skills acquired in the companion ME courses. The courseobjectives are (1) design problem solving, creative thinking, project planning and teamworkthrough a challenging design and build project; (2) to provide experience in fundamentalengineering reporting and communication including project plans, design reviews, and projectreports. To address the transition of the three unit, one quarter design course into a six unit, threequarter Capstone Design course, an Academic Coordinator with over twenty-five years ofengineering

Conference Session

Focus on Undergraduate Impact

Collection

2002 Annual Conference

Authors

Andrew Vavreck

many schools, as asurvey in this paper of publications indicates, with mixed results being experienced. The paperthen focuses on an extensive application of project management techniques to capstone designcourses involving engineering technology students and to other student design projects (e.g. SAEMini Baja) at Penn State Altoona, through involvement by business school faculty and students.Future plans, lessons learned and student perceptions are discussed and recommendations made.IntroductionThe importance of group design projects to today’s engineering and engineering technologyprograms is indisputable,1 and multidisciplinary teams on such projects are of growingsignificance, to give students exposure to other ways of addressing problems

Conference Session

The Best of Design in Engineering Education

Collection

2008 Annual Conference & Exposition

Authors

Stephen Laguette, University of California-Santa Barbara

Tagged Divisions

Design in Engineering Education

, hands-on experience, and integrates analytical and designskills acquired in the companion ME courses. The course objectives are (1) designproblem solving, creative thinking, project planning and teamwork through a challengingdesign and build project; (2) to provide experience in fundamental engineering reportingand communication including project plans, design reviews, and project reports. ACapstone Design program has now been developed and has become an integral andimportant component of the mechanical engineering curriculum. This program nowallows the students to address more significant and practical design projects.The ME Capstone Design Program added an Industry Partner Program for the 2005/06student projects. This program was successfully

Conference Session

Biomedical Division Poster Session

Collection

2016 ASEE Annual Conference & Exposition

Authors

Jeannie S Stephens, University of Delaware; Sarah Ilkhanipour Rooney, University of Delaware; Elisa S. Arch, University of Delaware; Jill Higginson, University of Delaware

Tagged Divisions

Biomedical

; Design Metrics Weeks 2-5 Phase 2: Concept Generation & Selection Weeks 6-9 Phase 3: Final Design, Prototype & Project Budget Midterm Oral Presentation, Outside Reviews Weeks 10-15 Phase 4: Design Validation, Conclusion & Path Forward Final Oral Presentation, Outside Reviews & Poster Session *Falls in the middle of Phase 3, closer to week 7-8Senior Design (BMEG450), a capstone course, is an intensive 6-credit, one semester, team-basedproject driven course, which requires strong teamwork and application of engineering, scienceand design principles to solve a sponsor driven problem. Traditionally, industrial partners

Conference Session

Partnerships in IE Education

Collection

2003 Annual Conference

Authors

Joseph Emanuel

Session 3657 The Community Based Capstone Design Experience: More than Meets the Eye Joseph T. Emanuel Industrial and Manufacturing Engineering and Technology Bradley UniversityAbstractFor the past 36 years, Bradley University’s Industrial Engineering program has used community-based projects as the basis for the Capstone Design experience. For the past 25 years, the“clients” for these projects have been asked to pay for the service provided. The courseemphasizes real-world team problem solving and the need for strong

Conference Session

DEED Technical Session 3 Capstone Design

Collection

2022 ASEE Annual Conference & Exposition

Authors

Chelsea Salinas, Colorado School of Mines; Joel Bach, Colorado School of Mines; Megan Sanders, Colorado School of Mines

Powered by www.slayte.com The Design Firm Model as Applied to Capstone DesignAs the culminating experience in an engineering program, capstone design provides students a glimpseinto real-world design. Yet, real-world problems are complicated and dynamic. How, then, can we pushthe boundaries of successful capstone design programs to encapsulate an experience that more directlymimics the complexities and diversities that exist in professional practice? We propose a model forcapstone design that more closely approximates professional engineering practice with students workingon multiple projects, each on a distinct timeline and each with a different team of participants. TheHuman Centered Design Studio (HCDS) at the Colorado School

Conference Session

Unique Laboratory Experiments & Programs

Collection

2004 Annual Conference

Authors

Terrence O'Connor; Nghia Le

Session Number 2526 The Pressure Sensing Project Nghia T. Le, Terry O’Connor Purdue University School of Technology Electrical Engineering TechnologyA. IntroductionThe paper discusses the use of a multi-faceted electronic project as a capstone experiencefor an associate degree program in Electrical and Computer Engineering Technology(ECET) at Purdue University's School of Technology New Albany location. This projectincorporates several different technologies from both the analog and digital realms ofelectronics. The

Conference Session

TC2K Issues and Assessment

Collection

2003 Annual Conference

Authors

Paul Lin; Harold Broberg

programobjectives [1].The Electrical and Computer Engineering Technology (ECET) has been continuouslyaccredited for over 30 years, was last accredited in 1998, and is preparing for areaccreditation visit in 2004 during the first year of exclusive use of the TC2K criteria.While in the process of refining our curriculum as outcome-based, the authors found thatthe importance of capstone or integrating experiences is also recognized by ABET andhighlighted in the Self-Study Questionnaire [1]. The Senior Design Project courses havebeen in place since 1968 and it was concluded in [2] and [3] that the course providesstudents with the best possible preparation in terms of current technical knowledge,techniques, skills, and written/oral reports for industry