Collection

1998 Annual Conference

Authors

Kristopher Delgado; Hartono Sumali

Department at Page 3.344.1Purdue University has decided to start offering an undergraduate course in instrumentation andmeasurement. The authors are drafting a plan for such a course to be given in the Fall 1998semester on an experimental basis. The plan is outlined in this paper.Challenges in offering an instrumentation courseSome agricultural or biological engineering departments do not offer any instrumentation course.The lack of instrumentation courses in those departments may be caused by several factors:FacilityA good instrumentation course requires a laboratory that can be very expensive. Manyagricultural and biological engineering

Collection

1998 Annual Conference

Authors

Daniel P. Schrage

chance to enter national competitions andprovide a seamless transition with the graduate program was needed. This has beenaccomplished over the past few years by having highly motivated undergraduates takeboth the capstone senior design courses, as well as enter national student designcompetitions and participate as teams, using the CE/IPPD methodology developed in thegraduate program. This approach has proven to be highly successful and has provided anexcellent recruiting program for the graduate design program as well as provide a smoothtransition. It also has been used to help satisfy the ABET 2000 intent of outcomemeasurement. With the conversion from a quarter system to a semester system in 1999we plan to provide an even tighter linkage

Collection

1998 Annual Conference

Authors

Daniel Walsh; David Gibbs; Alan Demmons

to technology.Assessment results are presented and discussed. IntroductionCal Poly is currently reevaluating its curricula, indeed its very role as a polytechnic university. Part of thatreevaluation is a discussion of educational expectations and desired outcomes for non-technical majors. Shouldliberal arts majors be aware of the strong effect of technology on our culture? Should music majors appreciate thelinks between their discipline and computers? At first glance, it seems that the answer is a resounding yes. TheUniversity Strategic Plan calls for all Cal Poly graduates “to have acquired knowledge regarding technology, itsimportance to society and its impacts on natural systems”. Our

Collection

1997 Annual Conference

Authors

Parris C. Neal; Donna E. Peterson; Cindy L. Lynch; Cameron Wright

.”• “After reviewing my journal, it was apparent that there was a trend in my study habits and grades. When I did the homework and went in for extra instruction, there was a dramatic improvement in my grades. I got into a bad cycle of doing well and then letting up.”• “By looking at the study journal I had written for the first [exam], I was able to make changes to my study plans... These techniques have helped me become a better student. I was able to get better grades on [exams] not only in this class, but also in all my other classes as well.”• “I felt I have improved my study skills, not only in this class, but in all of my classes.”• “What I learned for study habits is that because I had to write in a study journal I thought

Collection

1997 Annual Conference

Authors

Heather Nachtmann Umphred; Kim LaScola Needy; Jerome P. Lavelle

groups nearly twice as often asIE faculty. Further probing into this finding is planned for future work. As depicted in Figure 3,groups are being used most frequently in the form of term projects and presentations. Groups 6% term 12% projects/presentations case studies homework 46% 18

Collection

1997 Annual Conference

Authors

G. Frederick d'Almaine; Brian Manhire; Samuel O. Atteh

faculty by engineering discipline is given in Table 2. The mainstream disciplinesare chemical, civil, electrical and mechanical engineering. Other disciplines such as avionics,industrial and medical engineering as well as town and regional planning, computer science, ar-chitecture and building are also offered but not at every technikon. The engineering qualifications offered at South African technikons consist of the follow- Page 2.169.4ing:11• National Diploma in Engineering (3 year course)• Baccalaureus Technologiae, B Tech degree in Engineering (at least one year beyond the Na- tional Diploma)• Magister Technologaie, M Tech

Collection

1997 Annual Conference

Authors

Mark A. Shields

. Finally,instructor-generated materials, workshops, lectures, and assignments were also produced duringthe five-week project period.A key emphasis of the whole project was intensive documentation and analysis of sourcematerial, including not only published articles and books on each team’s topic, but also data andreports compiled by a range of national and international organizations (including the United Page 2.176.2Nations, World Watch Institute, World Bank, Planned Parenthood, U. S. Census Bureau, Agencyfor International Development, World Health Organization, Oxfam, and many others). Teamsalso were instructed to make appropriate (but not

Collection

1997 Annual Conference

Authors

Peck Cho

one of the stages, then the discussion on making effective exams wouldfocus around tricks, situation-specific techniques, and other peripheral matters. For example, adebate can be generated ad infinitum on things like whether or not open-book exams are betterthan closed-book exams.6, 7 In the next section, the process of exam is briefly reviewed.The process of examThe process of exam can be analyzed in seven stages: the planning, writing or making,administering, scoring, returning, following up, and giving the final grade. Each step requirescareful considerations. In general, the considerations fall in one of three categories: procedural(how often, when, where, who, and how long), technical content (what, and how), andphilosophical (why

Collection

1997 Annual Conference

Authors

Michael H. Gregg

and functions -- reinforces the need to break largeproblems into smaller, digestible pieces.The FORTRAN project in EF1005 represents a significant level of programming -- both inquantity and structure. As a large project, it requires planning, not procrastination. Studentslearn through this process to plan their time, to design solution algorithms prior to writing code,to take one step or problem element at a time. EF faculty introduce upper class engineeringtopics as part of the project -- statics, heat transfer, queue theory as well as other selected topics.The majority of these students have not been exposed to engineering problems -- multi-facetedword problems -- prior to coming to Virginia Tech. The FORTRAN project represents their

Collection

1997 Annual Conference

Authors

T.R. Kurfess; M.L. Nagurka

behind the renewed ties betweenuniversities and industries. In developing a plan for a joint research project and when workingtogether towards its solution, both sides need to be cognizant of their respective roles to ensure asuccessful partnership.INTRODUCTION Interactions between industry and academia continue to increase in frequency. Thisgrowth is a result of the requirements and abilities of both parties involved. Many universitiescurrently suffer from cutbacks in government funding and are looking elsewhere for researchsupport. Simultaneously, corporations have reduced their R&D staff in an epidemic of “down-sizing” due to (generally, short-sighted) economic reasons. Many of these corporations still havesignificant demands in

Collection

1997 Annual Conference

Authors

P.R. Roberge; M.A.A. Tullmin

. However, experience has shownthat, despite advances in software applications, an enormous investment in professionaltime in planning and developing the course material is required. This computer basedcorrosion course is unique, in that emphasis has been placed on quantitative material,rather than on more descriptive subject matter often found in existing corrosion educationproducts. The course was also designed to be fundamentally interactive in nature, with theuse of situational case studies and assignments, in direct contrast to some approaches ofre-creating books in hypertext format. Course modules have been created initially inpaper based format, to place the scientific/technical course content on a sound footing.Selected case studies and

Collection

1997 Annual Conference

Authors

Sharon Zelmanowitz

Local residents living down gradient from the site A local PhD student studying the fate of lead in soils Two members of a pro-environment group Two members of an anti-environmentalist group A local T.V. reporter A local newspaper reporter The school nurse and the school principalThe mayor was responsible for conducting the meeting and keeping it moving so that everyonehad a chance to participate. The mayor was also encouraged to confer with all speakers to findout what they planned to cover and how long their presentations would be. Students wereencouraged to discuss the meeting and coordinate with each other where necessary, but it wasmade clear that each

Collection

1997 Annual Conference

Authors

Jawaharlal Mariappan

home appliances. Rapid changes in theindustry, and the increasing use of microprocessors in many of today′s machines lead to productsthat are mechatronics in nature. In order to design such products, an engineer must have generalknowledge of various design techniques and special knowledge of a blend of technologies. Suchskills can be obtained from multidisciplinary mechatronics courses. Recognizing the need for mechatronics education, some Japanese higher educationalinstitutions[1] and European colleges and universities[2-4] offer courses in mechatronics atdifferent levels. Some schools abroad even plan to offer degree programs[5] in mechatronics.The significance of this can be underscored by the fact that there is already an

Collection

1997 Annual Conference

Authors

Deborah Hochstein

faculty are called uponto do, namely service and teaching. Engineering and technology faculty are often unaware of thebroader definition of research offered by Ernest L. Boyer in his text, Scholarship Reconsidered.Many universities are adopting this expanded view of research. At The University of Memphis,teaching-faculty are encouraged to share their experience in the classroom through thescholarship of teaching. Technology faculty are joining in the research arena by sharing theirtechnical experience through the scholarship of application and the scholarship of integration.This paper presents, as an example of the expanded definition of research, one engineeringtechnology faculty member’s efforts to develop a research plan based upon teaching

Collection

1997 Annual Conference

Authors

Matthew R. James; Mario G. Beruvides

most capable authors on this issue since they are the founding fathers ofEngineering Management as we know it. They founded the first EM program in the US at the University of Missouri- Page 2.318.2Rolla.2 The course had more than one group, which addressed other research questions as their course assignment.Committee for the Protection of Human Subjects to run the experiment. The list of criteria forsubject acceptance are given below: • Subjects were recruited indirectly through engineering management faculty at various universities across the USA. • Subjects were sought from MBA and EM degree plans only

Collection

1998 Annual Conference

Authors

Milo D. Koretsky

Cpk are defined as follows: Specification Tolerance USL − LSL CP = = , Process Spread 6σ x − LSL USL − x  C pk = minimum  ,  3σ 3σ  where USL and LSL are the upper and lower specification limits, respectively, σ is the standard deviation of the sample and x is the mean. • Use of control charts, to monitor processes, access variation and determine process capability • Use of Design of Experiments (DOE) for planning experiments which

Collection

1999 Annual Conference

Authors

Ruben Rojas-Oviedo

resolved.International engineering education must evolve and mature in the near term as part of asystemic plan for bi-national economic development. International engineering education Page 4.59.3can not be placed out of the radar screen without risking increasing gaps on competencies ininternational communication, international teamwork and international manufacturing in thenext generation of engineering graduates.While before the 1990’s international education has grown substantially in areas of business,culture, tourism, health and agricultural aspects among others; however that has not been thecase for international engineering undergraduate education. The

Collection

1999 Annual Conference

Authors

John I. Hochstein; E. H. Perry

requisite knowledge or skill? DCTcan provide clear evidence that every student successfully completing a course has acquired aspecified ability. Careful curricular planning can produce a set of competencies that, when takenin the aggregate, provide proof of a demonstrated educational outcome for every student.Returning to the metaphor of a building, DCT can produce the essential building blocks todemonstrate that program objectives are being achieved.Another fundamental shift embodied by EC2000 is a new focus on the “process” of education. Itis no longer adequate to document the educational experience provided by a program. Tosuccessfully pass an EC2000 review, the program must demonstrate that processes are in place topursue continuous program

Collection

1999 Annual Conference

Authors

Naseem Ishaq; Salahuddin Qazi

all higher education institutions in the U.S. plan 7to offer distance education courses .V. Distance EducationDistance education takes place when a teacher and a student are separated by physical distanceand instructional gap is often bridged with a technology like voice, video, data and print. It is Page 4.201.4not a new concept and was pioneered by Stanford University in the USA, more than 30 yearsago in response to Silicon Valley’s demand to educate high-tech engineers and computerscientists. Soon after the Open University of United Kingdom was chartered in 1969, and iscurrently one of Britain’s largest

Collection

1999 Annual Conference

Authors

J. Hardwick Butler; Burton Courtney

andpotential surveyors throughout Georgia. This presentation will discuss the major aspects of thecurrent program and the potential for applying the same practices to meet the needs of othernon-traditional students.I. IntroductionOver the past few years, educators in all areas of the U.S. have sought innovative ways tointegrate rapid technological advances in computers and communications with traditionalmethods of instruction. Thanks to the foresight, planning, and financial support of GeorgiaState government officials, the University System administrators and college officials, MiddleGeorgia College has been provided the resources needed to provide distance learningopportunities to residents all across the State of Georgia. In this presentation, the

Collection

1999 Annual Conference

Authors

Winston F. Erevelles

assessment using the project evaluation matrix that addressesresearch questions, performance criteria, implementation strategies, assessment/evaluationmethods, timelines, and audience dissemination (4).Once the project description has been developed a plan of attack and a timeline are essential forgood project management. Regular communication on a weekly or other pre-determined timeinterval must be conducted using a variety of media. This is needed and involves allconstituents for purposes of project updates, periodic reports, exception handling, and focus/re-direction if necessary. Formative and summative assessments must be conducted to assess theimpact of the project over its lifecycle. The final stage involves the preparation of a

Collection

1999 Annual Conference

Authors

T. Scott; John P. O'Connell

several NSF Engineering Coalitions, there are only a few computer-orientedmaterials and no experiments in this subject.This paper describes our workshop content, philosophy, and execution. Some activities arediscussed in detail and we review part of the assessment information obtained from studentevaluations. Finally we discuss our plans for modifications and improvements of experimentsfor the first engineering thermodynamics course.II. Some Challenges to Learners and Teachers in the First Thermodynamics CourseAs in most schools, our first thermodynamics course follows basic physics and chemistry takenby all undergraduate engineers. It precedes, or sometimes accompanies, courses introducingstudents to their major discipline, especially in

Collection

1999 Annual Conference

Authors

Allen Leybourne

intensive well-organized trial at American Telephone andTelegraph, many things were tried to make employees feel better about their jobs, many ofwhich the reader might guess. Among these were: reduced hours and longer vacations,increased wages, better benefit packages, profit sharing and better training, communications,planning and job participation. These efforts met with limited or even questionable success. Asurvey was conducted to determine what factors affected job satisfaction. The factors foundincluded: accomplishments of the employee, true (not contrived) recognition foraccomplishments, increased responsibility resulting from achievements, opportunity to grow inknowledge and task competence and the chance for advancement.What environment

Collection

1999 Annual Conference

Authors

Roger Ruggles

Page 4.12.3methods used to implement the equations with the data available. Information collectedfrom the field with surveying instruments was provided to the students in order todevelop input values for the program. Typical results obtained from the secondlaboratory of this block are shown in Figure 2 and Table1. The resulting depth of flowand flow velocity information obtained from this computer simulation were used asconstraints in the design project. 0 Figure 2: Stream cross section at point of monitoring device placement.Plan: Plan 01 Reach: gopher Riv Sta: 2 Profile: 1 10/6/98W.S. Elev (ft) 310.23 Element

Collection

1999 Annual Conference

Authors

Phillip Farrington; Mel Adams; Mary Spann; Dawn R. Utley

is a member of ASEE, ASEM, and IIE.MEL ADAMS is Senior Research Scientist in the Center for Automation and Robotics at the University ofAlabama in Huntsville. He has a Ph.D. in management from the University of Tennessee and consults withFortune 500 and high tech new ventures on strategic planning, implementation and business development.His research focuses on managing strategic change, technology commercialization and entrepreneurship.MARY S. SPANN, a Senior Research Scientist in the Center for Automation and Robotics at theUniversity of Alabama in Huntsville, received her Ph.D. in management from the University of Tennessee.She consults and researches in the areas of strategic planning, business development, technologycommercialization

Collection

1999 Annual Conference

Authors

Sima Parisay

received considerable positive feedback from students. One suchtype of assignments was to write a report for a manager, who is not familiar with OperationsResearch (OR), explaining the output of the Quant software on different OR problems. Studentswere not allowed to use the terms specific to the OR field. They had to explain the situation andprovide comments. Based on students’ feedback, this was an excellent exercise in criticalthinking, communication skills, and writing a report.A team project was assigned with the intention to improve students’ communication skills(teamwork, preparing professional report, and planning), as well as dealing with a more complexcase and applying software.Students were required to prepare a portfolio from the

Collection

1998 Annual Conference

Authors

Marybeth Lima

glass viewing areasinstead of bars, and contains a natural habitat with numerous types of flora, a varied terrain, and apool, stream and waterfall system. Off exhibit areas include a medical facility, a keeper office,and two den areas to facilitate the addition of a second tiger to the exhibit. A completeenrichment plan is also part of the design; this comprehensive list of activities will providemental and physical stimuli for Mike in his new surroundings. The top of the enclosure iscovered with wire mesh. Recommendations. 1. The instructor should provide the students with more structurefor interacting in groups. While group governance was left up to the students, insufficientguidelines were provided to the students with respect to

Collection

1998 Annual Conference

Authors

Fathi Finaish

section, advantages and disadvantages, and completedrawings of the designed wing, showing size and plan form, are documented in this step.STEP 5: Compute model performance, iterate, and generate final wing designIn this step, the students calculate the model performance based on the designed wing of Step 4.It is required to determine the lift slope, and the oswald efficiency factor of the wing, lift anddrag coefficients, and lift to drag ratio. The required and available thrust and power aredetermined and plotted as functions of aircraft speed. These results are employed to determinethe maximum and minimum aircraft speeds and excess horsepower at any speed. For easyaccess of these calculations, the reader may refer to chapter 6 of reference 1

Collection

1998 Annual Conference

Authors

Hamid Khan

Management 13-19 (Seven Questions) Two coursesFinancial Management 20-22 (Three Questions) One courseDecision Making 23-28 (Six Questions) Three coursesStrategic Planning 29-33 (Five Questions) Four coursesNegotiation and Conflict Resolution 34-40 (Seven Questions) Two coursesManagerial Communication 41-42 (Two Questions) One course=============================================================== Table 1. Classification of Subscales of skills for analysis and number of courses offeredThe Executive Development Associates (EDA) study has shown earlier that managementdevelopment programs normally have four main areas of thrust

Collection

1998 Annual Conference

Authors

W. Cully Hession; Marty D. Matlock; G. Scott Osborn; Daniel E. Storm; Ann L. Kenimer

to decline 30percent (Brown, et al., 1997). According to a recent United Nations report, water use hasbeen growing at more than twice the rate of the population increase during this century(United Nations, 1997). Currently, about one third of the world’s population lives incountries that are experiencing moderate-to-high water stress partly resulting fromincreasing demands from a growing population and human activities; this number isexpected to double in the next 15 years (Gleick, 1993).The impact of human civilization on Earth’s ecosystem is not clearly understood.Certainly the human species is changing Earth’s ecosystem in a manner not planned,desired, or predicted. There is a growing concern that our demands for ecologicalservices may