Conference Session

Design Communications

Collection

2008 Annual Conference & Exposition

Authors

William Riddell, Rowan University; Maria Simone, Rowan University; Stephanie Farrell, Rowan University; Peter Mark Jansson, Rowan University

Tagged Divisions

Design in Engineering Education

AC 2008-468: COMMUNICATION IN A PROJECT BASED LEARNING DESIGNCOURSEWilliam Riddell, Rowan University William Riddell is an Assistant Professor in the Civil and Environmental Engineering Department at Rowan University. His research and teaching interests include design, structural mechanics, transportation safety, energy efficiency and clean energy generation. Prior to Rowan University, he worked for the US Department of Transportation Research and Special Program Administration, and was a National Research Council Postdoctoral Fellow in the Mechanics of Materials Branch at NASA Langley Research Center.Maria Simone, Rowan University Maria Simone is the Director of Public Speaking and

Conference Session

Innovation & Assessment in the delivery of IT/IET

Collection

2008 Annual Conference & Exposition

Authors

Akbar Eslami, Elizabeth City State University; Andrew Oxendine, Elizabeth City State University; Chelsey Daniels, Elizabeth City State University

Tagged Divisions

Engineering Technology

AC 2008-607: A PLC PROJECT IN A CONTROL COURSE LABORATORYAkbar Eslami, Elizabeth City State University Dr. Akbar Eslami is a professor and Engineering Technology coordinator in the Department of Technology at Elizabeth City State University. He received his Ph.D. in Mechanical Engineering from Old Dominion University. His research interests are in computer aided manufacturing, design, and automation.Andrew Oxendine, Elizabeth City State University Andrew Oxendine is a senior student in the Department of Technology at Elizabeth City State University and 2006-2007 McNair Scholar. His research interests are in PLC and automation.Chelsey Daniels, Elizabeth City State University Chelsey Daniels

Conference Session

Engineering in Middle Schools

Collection

2008 Annual Conference & Exposition

Authors

Paul Crips, Laramie Middle School; William Parker, Laramie County School District 1; Steven Barrett, University of Wyoming; Jerry Hamann, University of Wyoming

Tagged Divisions

K-12 & Pre-College Engineering

AC 2008-16: DISCOVERY PROJECT – IMPROVING SEVENTH GRADECRITICAL THINKING SKILLSPaul Crips, Laramie Middle School Paul M. Crips received his B.S. degree from the University of Wyoming in 1978 in Industrial Technology. He received a M.S. degree from the University of Wyoming in 2001 in Natural Science. Crips has spent the last 28 years as a teacher of junior high school aged students teaching both industrial technology and science. His most recent assignment is teaching seventh graders physical science, which includes classical physics and biological adaptation. Crips is an Amateur Radio operator holding an Extra Class FCC license (KI7TS). He is the advisor of two after school clubs

Conference Session

Experiential and Service Learning

Collection

2008 Annual Conference & Exposition

Authors

Jim Chamberlain, Clemson University

Tagged Divisions

Multidisciplinary Engineering

AC 2008-161: MULTIDISCIPLINARY DESIGN OF STUDENT PROJECTS INDEVELOPING COUNTRIESJim Chamberlain, Clemson University Jim F. Chamberlain is a Ph.D. student at Clemson University in Environmental Engineering and Earth Sciences. He received his M.S. in Environmental Systems Engineering from Clemson in 1994 and has worked as an environmental consultant for 12 years. His research interests are in the environmental impacts of growing monocultural switchgrass as a biofuel. Jim is a registered professional engineer and a member of the American Society for Engineering Education. Page 13.913.1© American

Conference Session

Mechanical Engineering Poster Session

Collection

2008 Annual Conference & Exposition

Authors

Kevin Schmaltz, Western Kentucky University

Tagged Divisions

Mechanical Engineering

AC 2008-176: STUDENT IMPLEMENTATION OF A UNIQUE GREENHOUSEHEATING PROJECTKevin Schmaltz, Western Kentucky University Kevin Schmaltz has been teaching thermo-fluid, energy conversion and professional component courses in Mechanical Engineering at Western Kentucky University since 2002. These include the Freshman Experience, Sophomore Design, Junior Design and the Senior Project Design course sequence. Prior to teaching at WKU, he was the ME Department Chair at Lake Superior State University for five years and the University Distinguished Teacher in 2001. Before entering the academic world, he was a project engineer for Shell Oil for eight years, designing and building offshore oil and

Conference Session

Manufacturing Engineering Technology Curriculum

Collection

2008 Annual Conference & Exposition

Authors

Wei Zhan, Texas A&M University; Jay Porter, Texas A&M University

Tagged Divisions

Engineering Technology

teaching Six Sigma as a course project in ajunior level Electronics Engineering Technology course. Instead of using a lecture onlystyle of teaching, the Six Sigma methodology was applied during a course project. Over aperiod of seven weeks, the students learned and practiced Six Sigma theory and processes.They followed the DMAIC (Define, Measure, Analyze, Improve, Control) process toimprove a given design. Six Sigma tools such as Critical to Quality (CTQ), QualityFunction Deployment (QFD), Failure Mode Effects and Analysis (FMEA) and CriticalPath Method (CPM) were introduced to the students. The business aspect of the productdevelopment process was added to the technical design contents to make the project morelike a real world experience for the

Conference Session

Electrical ET Curriculum and Projects

Collection

2008 Annual Conference & Exposition

Authors

James Everly, University of Cincinnati; Brian Resnick, University of Cincinnati

Tagged Divisions

Engineering Technology

AC 2008-1239: A PSK31 AUDIO BEACON PROJECT PROVIDES ALABORATORY CAPSTONE DESIGN EXPERIENCE IN DIGITALCOMMUNICATIONSJames Everly, University of Cincinnati James O. Everly is an Associate Professor of Electrical and Computer Engineering Technology at the University of Cincinnati. He received a BSEE and MSEE from The Ohio State University in 1969 and 1970, respectively. He is a Senior Member of the Institute of Electrical and Electronics Engineers (IEEE) and a registered professional engineer in the state of Ohio. He is the current past Chair of the IEEE Cincinnati Section, and in 1997 he received the IEEE Professional Achievement Award. He has held several research and management positions in

Conference Session

Alternative Energy Source Projects

Collection

2008 Annual Conference & Exposition

Authors

Mark Henderson, Arizona State University; Bradley Rogers, Arizona State University

Tagged Divisions

Energy Conversion and Conservation

AC 2008-1306: THE DEVELOPMENT OF AN ECONOMIC MODEL FORBIODIESEL PRODUCTION IN GHANAMark Henderson, Arizona State UniversityBradley Rogers, Arizona State University Page 13.1216.1© American Society for Engineering Education, 2008 The Development of an Economic Model for Biodiesel Production in GhanaAbstractIn this paper, the results of a project in which an interdisciplinary team of honors studentstravelled to Ghana in West Africa for the purpose of developing an economic model of biodieselproduction from energy crops in this region is described. The students included majors inengineering, business and finance, economics, and global studies

Conference Session

Mechanics Education Programs and Projects

Collection

2008 Annual Conference & Exposition

Authors

Cliff Lissenden, Pennsylvania State University; Nicholas Salamon, Pennsylvania State University; Andrew Miller, Pennsylvania State University

Tagged Divisions

Mechanics

AC 2008-1350: DESIGN PROJECT DESIGN FOR AN ELEMENTARY STRENGTHOF MATERIALS COURSECliff Lissenden, Pennsylvania State UniversityNicholas Salamon, Pennsylvania State UniversityAndrew Miller, Pennsylvania State University Page 13.374.1© American Society for Engineering Education, 2008 Design Project Design for an Elementary Strength of Materials CourseAbstractOur goal is to enable deeper learning by undergraduate engineering students via experience withan open-ended design project. In addition to knowledge, comprehension, and application,engineering design requires students to analyze and synthesize. Furthermore, students

Conference Session

Projects & Laboratories in Mechanical ET

Collection

2008 Annual Conference & Exposition

Authors

Joshua Pippin, Frostburg State University; Julie Wang, Frostburg State University

Tagged Divisions

Engineering Technology

Joshua Pippin and Julie Wang Frostburg State UniversityAbstractSince the need for alternate power sources is becoming more prevalent with each newday, a decision was made to work on the research and design for a laboratory-scale windturbine as an undergraduate research project. As such, the main goal of the project was tocreate advancements in wind power technologies. The objective of this research was todesign and build a wind turbine for experimental tests. Two different wind turbine bladesare tested on the model of the wind turbine. These results will further research that canhelp develop less expensive and smaller turbines that can be used in homes and farms.IntroductionThe challenge for this research project

Conference Session

Electrical ET Curriculum and Projects

Collection

2008 Annual Conference & Exposition

Authors

Min-Sung Koh, Eastern Washington University; Esteban Rodriguez-Marek, Eastern Washington University; Claudio Talarico, Eastern Washington University; David Freiberger, Eastern Washington University

Tagged Divisions

Engineering Technology

AC 2008-798: A CLASS PROJECT ON AN LDPC-BASED ERROR CORRECTINGSYSTEMMin-Sung Koh, Eastern Washington University MIN-SUNG KOH obtained his B.E. and M.S. in Control and Instrumentation Engineering in the University of ULSAN, South Korea, and his Ph. D in Electrical Engineering and Computer Engineering in Washington State University. His interests are in the areas of speech and image signal processing, signal processing in communication, photoacoustics and embedded systems.Esteban Rodriguez-Marek, Eastern Washington University ESTEBAN RODRIGUEZ-MAREK did his graduate work in Electrical Engineering at Washington State University. He worked as a research scientist at Fast Search & Transfer before

Conference Session

Electrical ET Curriculum and Projects

Collection

2008 Annual Conference & Exposition

Authors

Kathleen Ossman, University of Cincinnati

Tagged Divisions

Engineering Technology

the overlap-add algorithm works. This is the lab that students typicallyidentify as the most challenging for them.Student LearningDigital signal processing theory can be difficult for engineering technology students to grasp, butit is essential that students understand principles of sampling, aliasing, filter design, etc. beforemoving on to hardware-based design projects. Hands on experimentation usingMATLAB/Simulink enables them to visualize the concepts without becoming lost in themathematics or in hardware related issues. Including practical applications with music, sound, orpictures definitely sparks interest.In the wordlength effects lab, students are often surprised by the number of bits required for astable filter and the effect that

Conference Session

Electrical ET Curriculum and Projects

Collection

2008 Annual Conference & Exposition

Authors

Carl Spezia, Southern Illinois University-Carbondale

Tagged Divisions

Engineering Technology

AC 2008-940: INSTRUCTIONAL DEVELOPMENT AND ASSESSMENT OF ATASK-ORIENTED SENIOR LEVEL DATA ACQUISITION PROJECT IN ASIMULATED BUSINESS ENVIRONMENTCarl Spezia, Southern Illinois University-Carbondale Carl J. Spezia is an Assistant Professor in the Electrical Engineering Technology Program located in the Department of Technology at Southern Illinois University Carbondale (SIUC). He joined the program in1998 as a Visiting Assistant Professor. He worked as a power systems engineer for electric utilities for eight years prior to seeking a career in higher education. He is a licensed professional engineer in Illinois. His industrial assignments included power system modeling, power systems protection

Conference Session

Mechanics Education Programs and Projects

Collection

2008 Annual Conference & Exposition

Authors

Bridget Wadzuk, Villanova University; David Dinehart, Villanova University; Edward Glynn, Villanova University; Shawn Gross, Villanova University; Frank Hampton, Villanova University

Tagged Divisions

Mechanics

within the civil engineering curriculum and some schools mayopt out of requiring these courses for all civil engineering students to add flexibility to thecurriculum and reduce required credits.There is a trend that programs are moving to a track system. Sixteen of the surveyed schoolshave track systems; schools without a formal track system do tend to let students specialize in an Page 13.1124.7area with senior level electives and design projects. The most common two tracks areenvironmental and structural, although other common tracks are in transportation, waterresources and construction management. Fourteen of the sixteen schools that offer

Conference Session

Electrical ET Curriculum and Projects

Collection

2008 Annual Conference & Exposition

Authors

Helen McNally, Purdue University, West Lafayette

Tagged Divisions

Engineering Technology

to interest, professional conducted was expected of all and project/laboratoryassignments were to be made throughout the semester. A text was not required. A tentativegrading system was provided but the instructor reserved the right to make adjustments as thecourse developed. This approach was adopted from Singham2 “to model the exhilaration of thelife of the mind” rather than to stifle innovation through a “rigid rule-infested, watertightsyllabus.” Opinions of senior ECET faculty were elicited to insure our students could handle thechallenge.The tentative course schedule is presented in figure 1. The laboratory exercise occurred betweenthe two lectures each week and the schedule was designed for this. The course was designed inthe following

Conference Session

Projects & Laboratories in Mechanical ET

Collection

2008 Annual Conference & Exposition

Authors

Razwaan Arif, Farmingdale State College; Han Chu, Farmingdale, SUNY; Yeong Ryu, State University of New York, Farmingdale; Adam Filios, Farmingdale, SUNY; Hazem Tawfik, Farmingdale State College; Kamal Shahrabi, Kean College of New Jersey

Tagged Divisions

Engineering Technology

, control systems, fluid mechanics, thermodynamics, andsoftware applications. Major parts of this work were performed as student projects by the firsttwo authors who are students in the school of engineering technology. Namely students wereinvolved in setting up the fuel cell system, developing code for control algorithm and dataacquisition, and running the experiments. It is expected that this lab setup will be used in futureundergraduate senior projects for students in the departments of mechanical engineeringtechnology and electrical engineering technology. In addition, interdisciplinary courses inalternate forms of energy, fuel cells, solar energy systems, and control mechanisms could bedeveloped in the future as outgrowth of these experimental

Conference Session

Design Project Based Learning

Collection

2008 Annual Conference & Exposition

Authors

Vernon Ulrich, Grove City College

Tagged Divisions

Mechanical Engineering

designprojects for all students. Assessing a team’s project results is usually a relatively easy task.However, fairly assessing the performance of individual students within the team is much moredifficult. The complexity of the assessment task is compounded by the wide range of subjects,difficulty, and engineering tasks involved in differing projects. Assessing engineeringperformance across a variety of projects is also a common problem for most industrialemployers. Many companies that employ engineers use a management-by-objective (MBO)assessment system for their professional employees. Grove City College capstone designstudents are now being assessed with a MBO system similar to industrial employers. Adescription of the Grove City College rating

Conference Session

Mechanics Education Programs and Projects

Collection

2008 Annual Conference & Exposition

Authors

Sridhar Condoor, Saint Louis University, Parks College of Eng.; Sanjay Jayaram, Saint Louis University, Parks College of Eng.; Lawrence Boyer, Saint Louis University

Tagged Divisions

Mechanics

rotates the wheel in the direction of motion. To create the couple,the pivot and the reaction at the ground are offset in the caster design. Figure 7. Caster design3.3. Intelligent Formulation ProblemsThese problems are designed to nurture the ability to identify alternative approaches to formulatethe problem. This enables them to get out of stuck-in-a-rut as well as verify the result in analternative method.3.3.1. Problem 1Let us look at the problem of a boom supporting a 2000 lb weight at its end. The projection of itsend A on the xy plane is shown in fig. 8. The boom is supported by two cables, AB and AC. Thecables can only exert tensile load, whereas the boom can take loads along its axis in both

Conference Session

Mechanics Education Programs and Projects

Collection

2008 Annual Conference & Exposition

Authors

Christopher Papadopoulos

Tagged Divisions

Mechanics

needed to intuit theelegant solution directly, but it was not until I embraced the use of procedure that I reallydeveloped what I now consider to be my expertise in mechanics. I suspect that forreasons ranging from laziness to sincere sense of requirement and curiosity, studentscircumvent the application of procedure and attempt to identify a simple concept (whichoften corresponds to a simple formula) to solve a problem. Page 13.226.7I also remember very clearly a poignant incident that further illustrates the distinctionbetween procedure and concept22. Two former students once asked me about the designof a crane hook for a project in another course

Conference Session

Alternative Energy Source Projects

Collection

2008 Annual Conference & Exposition

Authors

Peter Schubert, Packer Engineering

Tagged Divisions

Energy Conversion and Conservation

AC 2008-2758: PLASMA TORCH FOR BIOMASS PYROLYSISPeter Schubert, Packer Engineering Dr. Schubert conducts research into alternate energy, space-based manufacturing, and engineering education at Packer Engineering in Naperville, IL. He is Senior Director, and has served as PI on projects from DOE, NASA and the GSA. He has published 47 technical papers, has 25 US patents, and is an instructor with the Society of Automotive Engineers. Prior experience includes 21 years in automotive electronics with Delphi Corporation, where he was a Technical Fellow. His doctorate in EE from Purdue was sponsored by a GM Fellowship. His MSEE is from U. of Cincinnati on a Whirlpool Fellowship, and his

Conference Session

Projects & Laboratories in Mechanical ET

Collection

2008 Annual Conference & Exposition

Authors

Pramod Kumar, University of Louisiana at Lafayette; Pavel Ikonomov, Western Michigan University; Suren Dwivedi, University of Louisiana-Lafayette; Alamgir Choudhury, Western Michigan University; Jorge Rodriguez, Western Michigan University

Tagged Divisions

Engineering Technology

AC 2008-2782: MEASURING AND MODELING OF A 3-D ROAD SURFACEPramod Kumar , University of Louisiana at LafayettePavel Ikonomov, Western Michigan UniversitySuren Dwivedi, University of Louisiana-LafayetteAlamgir Choudhury, Western Michigan UniversityJorge Rodriguez, Western Michigan University Page 13.875.1© American Society for Engineering Education, 2008 Laser Scanning and Modeling of a 3D Road SurfaceAbstractThe aim of this research is to create 3D model of an existing road surface and build with specialdeviation features used for vehicle testing. For the purpose of this project a special scanningsystem using two laser measuring scanner was designed and built. Data

Conference Session

Projects & Laboratories in Mechanical ET

Collection

2008 Annual Conference & Exposition

Authors

Jorge Rodriguez, Western Michigan University; Pavel Ikonomov, Western Michigan University; Luis Rodriguez, University of Wisconsin - Waukesha; Alamgir Choudhury, Western Michigan University

Tagged Divisions

Engineering Technology

importance of validation in a lab-setting. It can be saidthat it is even more important in academics because students are at the initial phase of theirengineering formation. Towards that end, a project involving flexible elements, such as hosesand cables, was utilized to get students involved in a validation exercise.Flexible elements are absolutely essential to the safe and successful operation of any vehicle, butthey are often difficult to design and define because they are subject to large elastic deformationsand because of their potential collisions with other components. This combination of factorsleaves flexible elements to be rushed into production near the end of a design cycle. Therefore, incollaboration between industry and academia, a CAE

Conference Session

Alternative Energy Source Projects

Collection

2008 Annual Conference & Exposition

Authors

Esther Ososanya, University of the District of Columbia; Abiose Adebayo, University of the District of Columbia; Jean-Pierre Fodjouo, University of the District of Columbia; Steven Omoijuanfo, University of the District of Columbia; Francis Ayissi, University of the District of Columbia; Tuan Ly, University of the District of Columbia; Kevin Allen, University of the District of Columbia; Mamoun Mohammed Ali, University of the District of Columbia; Gizaw Mulugeta, University of the District of Columbia; Anene Wynn, University of the District of Columbia; Dimitri Ditombi Bamba, University of the District of Columbia; Meraj Shaikh, University of the District of Columbia

Tagged Divisions

Energy Conversion and Conservation

ofthe biogas produced, using a Gas Chromatograph (CG), with Flame Ionization Detector(FID), to separate the methane from carbon dioxide.The biogas produced contains Methane CH4, with very small percentage of Carbondioxide CO2, and some traces of Nitrogen N2, Hydrogen H2, and Hydrogen SulfideH2SO4. The economic viability of this technology, advantages, and the production costcompared to other renewable energy resources are also compared. This technology willbe used to power the heating unit in a Zero Energy Home (ZEH) currently underconstruction.Introduction:The first phase of the Anaerobic digestor design project takes students through theengineering design process, i.e., the conceptual design and analysis, and design feasibilitystudy. The

Conference Session

Multidisciplinary Capstone Design Projects

Collection

2008 Annual Conference & Exposition

Authors

Zachary Gutierrez, University of Wyoming; Charles Dolan, University of Wyoming

Tagged Divisions

Multidisciplinary Engineering

toevaluate the level of learning that the students display in a longitudinal study. By comparing theresults of similar courses inside and outside of specific departments, instructors have theopportunity to adjust their courses to improve the students educational experience. Tying theEngineering Science Courses together with a realistic and interesting project, such as windturbines, is intended to increase student interest and create a desire to further their education aswell as increase their learning levels. Bloom’s Taxonomy1,2,3 was selected as an assessment tool for this project. It is one ofthe most identifiable tools for examining student’s cognitive skills. In this case the cognitiveskills are the learning levels and critical thinking

Conference Session

Multidisciplinary Capstone Design Projects

Collection

2008 Annual Conference & Exposition

Authors

Charles Dolan, University of Wyoming; Ovid Plumb, University of Wyoming

Tagged Divisions

Multidisciplinary Engineering

Education, 2008 Interdisciplinary Capstone Design Program A Case StudyAbstractTo advance interdisciplinary engineering, an all college multi-disciplinary senior design programwas initiated. The initial project was a two year effort to design an automated transit system forthe campus. The first semester was a planning stage to establish vehicle, route and infrastructureparameters. The planning semester was followed by three semesters of sequential design.Students enter the program at various stages of development and must complete defined portionsof the overall project. The program places emphasis on documenting work, picking up workinitiated by others and communicating design objectives

Conference Session

Mechanics Education Programs and Projects

Collection

2008 Annual Conference & Exposition

Authors

Michael Hennessey, University of St. Thomas

Tagged Divisions

Mechanics

AC 2008-565: STATICS AND DYNAMICS PROJECTS EMPHASIZINGINTRODUCTORY DESIGN AND MANUFACTURINGMichael Hennessey, University of St. Thomas DR. MICHAEL P. HENNESSEY is a tenured Associate Professor of Mechanical Engineering within the School of Engineering. He has taught over 15 different courses in mechanical engineering at the undergraduate and graduate level and has written 33 papers in research (kinematics, dynamics and control of mechanical systems and related areas of applied mathematics) and mechanical engineering education, including the presentation of 10 papers at ASEE conferences (National (3), along with North Midwest (6) and St. Lawrence (1) sections

Conference Session

Electrical ET Curriculum and Projects

Collection

2008 Annual Conference & Exposition

Authors

Michael Dutko, Bloomsburg University; Cathy Auburger, Bloomsburg University; Patrick Anderson, Bloomsburg University; Biswajit Ray, Bloomsburg University

Tagged Divisions

Engineering Technology

AC 2008-718: COMPUTER-CONTROLLED INSTRUMENTATION PROJECTS BYSOPHOMORE-LEVEL EET STUDENTSMichael Dutko, Bloomsburg University Mike is a junior in the EET program at Bloomsburg University of Pennsylvania. He recently completed his co-op experience in designing electromechanical systems with Beck Actuators. Mike is looking forward to professional work in high-power electromechanical systems after graduation.Cathy Auburger, Bloomsburg University Cathy is a junior in the EET program at Bloomsburg University of Pennsylvania. She recently completed her co-op experience in automated manufacturing systems with Harley-Davidson. Cathy is looking forward to professional work in a high-tech

Conference Session

Projects & Laboratories in Mechanical ET

Collection

2008 Annual Conference & Exposition

Authors

Robert Edwards, Pennsylvania State University-Erie

Tagged Divisions

Engineering Technology

Student ProjectAbstr act:It can be fairly expensive to equip a heat transfer lab with commercially available devices. It isalways nice to be able to make a device that provides an effective lab experience for the students.It is an extra bonus if the device can be designed as a student project, giving the studentsworking on the device both a real design experience and a better understanding of the principlesinvolved with the device and the associated lab exercise.One example of such a device is a 2-dimensional heat conduction device which was designedand built as a student senior design project by mechanical engineering technology students atPenn State Erie, The Behrend College. The device described in this paper allows the students todetermine

Conference Session

Electrical and Computer Engineering Laboratories

Collection

2008 Annual Conference & Exposition

Authors

Oscar Ortiz, LeTourneau University; Paul Leiffer, LeTourneau University

Tagged Divisions

Division Experimentation & Lab-Oriented Studies

Page 13.843.1© American Society for Engineering Education, 2008 LEARNING ANALOG ELECTRONICS THROUGH PROJECT- BASED INVESTIGATION OF FM COMMUNICATION CIRCUITSAbstractSince historically much of the early development of analog electronics took place in thecommunication field present, day students’ understanding of electronics can be enhanced byworking with FM communication circuits. Students majoring in the electrical and computerengineering concentrations at our university are required during their junior year to take a three-hour lecture course and a two-credit-hour lab course in analog electronics. By the end of thecourses, students learn the theory and application of such components as diodes, Zener diodes,NPN and PNP

Conference Session

Venturing Out: Service Learning, Study Abroad, and Criterion H

Collection

2008 Annual Conference & Exposition

Authors

John Duffy, University of Massachusetts Lowell; Carol Barry, University Massachusetts Lowell; Linda Barrington, University of Massachusetts-Lowell; David Kazmer, University of Massachusetts-Lowell; William Moeller, University of Massachusetts Lowell; Cheryl West, University of Massachusetts Lowell

Tagged Divisions

Liberal Education

AC 2008-1525: SERVICE-LEARNING PROJECTS IN 35 COREUNDERGRADUATE ENGINEERING COURSESJohn Duffy, University of Massachusetts Lowell Professor, Mechanical EngineeringCarol Barry, University Massachusetts Lowell Associate Professor, Plastics EngineeringLinda Barrington, University of Massachusetts-Lowell Service-Learning Coordinator, College of EngineeringDavid Kazmer, University of Massachusetts-Lowell Professor, Plastics EngineeringWilliam Moeller, University of Massachusetts Lowell Professor Emeritus, Civil EngineeringCheryl West, University of Massachusetts Lowell Doctoral Student, Work Environment Department Page 13.1074.1© American