Paper ID #5871A Project Based Implementation of a Power Systems Course for Electricaland Computer Engineering Technology StudentsDr. Hayrettin Bora Karayaka, Western Carolina University Bora Karayaka is an Electrical Engineering faculty at Kimmel School, Western Carolina University. With his over ten years of industry experience, he has extensive experience in project management, and a clear understanding of deadlines, industry requirements, safety and reliability issues, and other aspects in the power and energy fields. He is responsible for teaching electric power engineering courses in the department. Dr
Paper ID #6444First Results with a Virtual Platform for the Renewable Energy TechnologyCoursesDr. Radian G Belu, Drexel University (Tech.) Dr. Radian Belu is Assistant Professor within the Engineering Technology (ET) program - Drexel Uni- versity, Philadelphia, USA. He is holding the second position as Research Assistant Professor at Desert Research Institute – Renewable Energy Center, Reno, Nevada. Before joining to the Drexel University Dr. Belu hold faculty and research positions at universities and research institutes in Romania, Canada and United States. He also worked for several years in industry as a project manager
Paper ID #8129The LowCost Vertical Axis Wind Turbine Project: An exercise in learningacross disciplinesDr. Narayanan M. Komerath, Georgia Institute of Technology This is a student-led paper guided by Professor Komerath. Dr. Komerath is a professor of aerospace engineering at Georgia Institute of Technology, and director of the Micro Renewable Energy Systems Laboratory. He has over 300 publications, over 120 of them peer-reviewed, plus 3 US Patents, and has guided 15 PhDs , 50+ MS and over 160 undergraduate research special problem projects. He is a former Chair of the Aerospace Division.Akshay Milind Pendharkar, Georgia
Paper ID #8080An Inexpensive Inverted Downdraft Biomass Gasifier for Experimental Energy-Thermal-Fluids DemonstrationsDr. Matthew J. Traum, Milwaukee School of Engineering Dr. Matthew J. Traum is an assistant professor of mechanical engineering at the Milwaukee School of Engineering (MSOE). He received a Ph.D. in mechanical engineering from the Massachusetts Institute of Technology [2007] where he held a research assistantship at MIT’s Institute for Soldier Nanotechnologies (ISN). At MIT he invented a new nano-enabled garment to provide simultaneous ballistic and thermal pro- tection to infantry soldiers. Dr. Traum
Paper ID #7132Smart Grid, Industry Trends and Power Engineering EducationDr. Wajiha Shireen, University of Houston (CoT) Wajiha Shireen received her B.S degree from Bangladesh University of Engineering and Technology in 1987, her M.S and PhD degrees in 1991 and 1993, both from Texas A&M University, College Station, Texas, all in Electrical Engineering. She joined University of Houston in 1993 and currently is a full Professor and holds a joint appointment in the Engineering Technology Department and the Electrical and Computer Engineering Department at University of Houston, Houston, Texas. Her current research
Paper ID #6721Energy Sustainability in Transportation Systems: Translating Electric Vehi-cle Research Results to 7th and 8th GradersDr. Ona Egbue, Missouri University of Science and Technology, Rolla MO Dr. Ona Egbue is a postdoctoral associate in the Engineering Management and Systems Engineering De- partment at Missouri University of Science and Technology. She holds a Ph.D. in Engineering Manage- ment from Missouri University of Science and Technology, a master’s degree in Earth and Environmental Resource Management from the University of South Carolina and a bachelor of Engineering degree in Electrical/Electronics
Paper ID #7381Laboratory Development for a CCLI Course on PV EngineeringDr. Hirak C Patangia, University of Arkansas, Little Rock Dr. Hirak Patangia is a professor of Electronics and Computer in the College of Engineering and Informa- tion Technology with teaching responsibilities in both Engineering Technology and Systems Engineering. He has served the university in various administrative positions including interim dean, associate dean, and department chair before returning to full time teaching and research. He has involved undergraduates in his research extensively and many of his publications include undergraduates
2020.5Regionally, three of the large employers of power engineers, Portland General Electric (PGE),PacifiCorp and the Bonneville Power Administration (BPA), project short-term, 2015-2020,retirement percentages on the order of 60% or greater (Table 1). 6, 7 In addition, technological,regulatory and political changes are resulting in increased investment in power systems planningand capital investment, further driving the demand for power engineers.Table 1 Eligible and projected retirements of engineers in 2015 and 2020 at the two local investor owned utilitiesand BPA; data collected by the Oregon and SW Washington Energy Consortium, of which PGE, PacifiCorp and BPAare members. Current Eligible for Projected to
support to Air Force Space Command in their oversight of strategic and tactical satellite communications. He received his B.S.E.E. degree in 1991 from the United Stated Air Force Academy, an M.S. degree in Systems Engineering in 1995, and his PhD in Electrical Engineering in 2005 from the Air Force Institute of Technology. He also received an M.S.E.E from Florida State University in 1998. Dr. Peterson is a Senior member of IEEE and served as Deputy Department Head in the Department of Electrical and Computer Engineering at the United Stated Air Force Academy until retiring from the military in 2011.Ms. Susan Elmore, US Air Force Academy Susan Elmore received a BA degree from California State University, Sacramento in
energy effi- ciency to energy and water sector workforce development, education and training. My field sites include urban communities in the US and Denmark as well as rural Tanzania.Dr. Michael S. Isaacson, University of California, Santa CruzAli Shakouri Shakouri, Purdue University Ali Shakouri is the Mary Jo and Robert L. Kirk Director of the Birck Nanotechnology Center and a Profes- sor of Electrical and Computer Engineering at Purdue University in Indiana. He received his Engineering degree from Telecom Paris, France in 1990 and Ph.D. from California Institute of Technology in 1995. His current research is on nanoscale heat and current transport in semiconductor devices, high resolution thermal imaging, micro
Paper ID #6261Nuclear Workforce Development Scholarships and Enhancements ProgramPhase I: Outreach and RecruitingDr. Hayrettin B Karayaka, Western Carolina University Hayrettin Bora Karayaka, PhD Assistant Professor of Electrical Engineering Western Carolina University Department of Engineering and Technology Belk Building 339 Cullowhee, NC 28723 Bora Karayaka is an Electrical Engineering faculty at Kimmel School, Western Carolina University. With his over ten years of industry experience, he has extensive experience in project management, and a clear understanding of deadlines, industry requirements, safety and
her Bachelor’s degree from Presidency College, Calcutta, India; thereafter received her Master’s degree in Botany with a first class from the University Colleges of Sciences and Technology, Calcutta, India. Dr. Mitra is actively involved in research and teaching in the fields of biology, geology, environmental and marine sciences, and pedagogy. She is the recipient of many awards, scholarships, and grants.Dr. Abhijit Nagchaudhuri, University of Maryland, Eastern Shore Abhijit Nagchaudhuri is a Professor in the Department of Engineering and Aviation Sciences at University of Maryland Eastern Shore. Dr. Nagchaudhuri is a member of ASME and ASEE professional societies and is actively involved in teaching and research
Paper ID #6502Economic and Life Cycle Analysis of Renewable Energy SystemsDr. Kendrick T. Aung, Lamar University Dr. Kendrick Aung is a professor in the Department of Mechanical Engineering at Lamar University. He received his Ph.D. in Aerospace Engineering from University of Michigan in 1996. He is an active member of ASEE, ASME, AIAA, SAE and Combustion Institute. He has published over 70 technical papers and presented several papers at national and international conferences. Page 23.447.1 c
Paper ID #6556Optimization of a Trash to Energy SystemDrew Witte, IUPUIProf. Peter J. Schubert, IUPUI Peter J. Schubert, Ph.D., P.E. is Professor of Electrical and Computer Engineering at IUPUI, and serves as the Director of the Richard G. Lugar Center for Renewable Energy. He has published 75 technical papers and ha 35 US patents. He has been the principal investigator on grants from NASA, DOE, DOD, USDA, and GSA. Page 23.949.1 c American Society for Engineering Education, 2013
trainings on engineering, communication, and socialawareness.The project was a great example of developing suitable technology to the targeted population.From the project, the students learned that the best technology is not necessary the mostadvanced technology, but the most suitable one. They did not need to use state-of-the-artcomponents and materials. On the contrary, they are limited to the most primitive means.Nevertheless, they still need to apply their engineering skills to solve demanding problems. Forexample, they had to build a bomb calorimeter to test the calorific value of the briquette. Theyalso need to develop a systematic way to find out the minimum pressure of making a usablebriquette. They also learned the importance of having
Paper ID #7578Hands on Experience for students on an Energy Management SystemDr. Jaime Ramos P.E., University of Texas, Pan AmericanMr. Emmanuel Benitez, University of Texas, Pan AmericanMr. Leonel Aguilera, University of Texas, Pan American Leonel Aguilera earned his B.S degree in Electrical Engineering from The Technology Institute of Saltillo, Coahuila, Mexico in 2006. He obtained a MS in Electrical Engineering at the University of Texas-Pan American in Edinburg, Tex. He is an active researcher with interests in Networking and Renewable Energy
Page 23.879.1 c American Society for Engineering Education, 2013 Low Voltage Power Distribution System Provides Incubator for Energy- Related Student ProjectsAbstractAn emerging technology in building power distribution involves the use of a room ceiling tilesupport grid to create a low voltage “microgrid” network. With this network, 24VDC power isrouted throughout the room via conductors embedded in the drop-ceiling support structure. Userscan then tap into the low voltage supply from any location in the room. The microgrid effort isorganized by a consortium of industry and university partners exploring the use of low voltageDC indoor power distribution for a variety of commercial
-ZeroEnergy installation meaning it should attempt to generate as much energy as it uses. With a primarymission of education, USAFA has a unique opportunity to contribute to the Net-Zero Energy efforts whileat the same time promoting Science, Technology, Engineering, and Math (STEM). Within USAFA, theDepartment of Electrical and Computer Engineering has developed a Green Energy Lab to further bothfaculty and student understanding of solar, wind, and other energy generation technologies and theirapplications. Over the last several years and including the current year, undergraduate senior capstoneteams have designed and developed a highly mobile renewable/green energy system supporting the NetZero goal. The system consists of an all-electric off-road
time, previously havingbeen offered in spring 20091. In this second offering of the course, three engineering studentsand ten non-engineering students enrolled in this elective course. The intention was to bringtogether different majors to learn about the many facets of marine renewable energy (policy,technology, economics, etc.) and to develop cross-discipline communication. Of the fourteenscheduled meeting times throughout the semester, eight seminars were presented, two classperiods were used for debates, another two for student presentations, and the remaining periodsfor discussion. The final paper was on the student’s perspective of the future of marinerenewable energy with respect to the U.S. Coast Guard.In this second offering of the
Paper ID #6635Piloting an Energy Specialist Training Program: Lessons LearnedDr. Sungwon S. Kim, Minnesota State University, Mankato Dr. Sungwon S. Kim joined the Mechanical Engineering faculty at MSU Mankato in January of 2011. He received his Ph.D. degree in Mechanical Engineering from Purdue University (2008), working in the area of synthesizing carbon nanotubes, his M.S. degree in Mechanical Engineering from Korea Advanced Institute of Science and Technology (KAIST), working in the area of designing and analyzing double spiral heat exchangers, and his B.S. degree in Mechanical Engineering from Korea University (2000
Paper ID #6733Economic Enhancements to a First-Year Net Zero Energy Home Design ProjectProf. Andrew Lau, Pennsylvania State University, University Park Andrew Lau is an associate professor of Engineering and coordinator of first-year seminars. He earned his B.S.M.E. from Penn State in 1977, and his M.S.M.E. from the University of Wisconsin - Madison in 1983. Page 23.448.1 c American Society for Engineering Education, 2013 Economic Enhancements to a First-Year Net Zero Energy Home
country.Developing the technology to produce and utilize biofuels is truly a multidisciplinary project,involving chemists to understand the fundamental chemical processes, chemical engineers toefficiently produce the biofuel, mechanical engineers to understand the effects of using biofuel inconventional engines, and mathematicians to aide with developing predictive models.At Kettering University an interdisciplinary group of faculty have been using biofuel educationactivities to motivate their students and develop student understanding of the opportunities andchallenges associated with producing and utilizing biofuels. Ongoing activities include projectsfor the classroom, undergraduate research, co-operative learning projects, and studentcompetition
Paper ID #6044An Interdisciplinary Senior Design Project to Convert Agricultural Residuesto Solid Fuel PelletsDr. Wookwon Lee, Gannon University Wookwon Lee, P.E. received the B.S. degree in electronic engineering from Inha University, Korea, in 1985, and the M.S. and D.Sc. degrees in electrical engineering from the George Washington University, Washington, DC, in 1992 and 1995, respectively. He is currently on the faculty of the Department of Electrical and Computer Engineering at Gannon University, Erie, PA. Prior to joining Gannon, he had been involved in various research and development projects in industry and academia
monitor daily electricity consumption has becomeincreasingly important with the ever growing demands for energy. Monitoring and quantifyingpower consumption enables engineers to notice problems with systems while in operation, andalso better plan future systems from the data gathered. As a result, power quality (PQ)measurement concepts are evolving from instantaneous metering to continuous monitoring andrecent developments in measurement technology make PQ monitoring systems more powerful.This equates to the construction and utilization of more flexible, compact and intelligent PQsystems.The goal of this project was to design, construct and test a monitoring system that is cost-effective, reliable and easily deployable in any environment. The
Department ofIndustrial and Manufacturing Engineering, teaching fundamentals of energy efficiency will be mainlythrough the thermodynamics and fluid mechanics courses. For a more comprehensive practice of thesubject from freshman thru senior level, a new freshman level product design fundamentals is introduced.The thermodynamics and fluid mechanics courses are reformed as a lecture and lab classes, and a newadvanced product design course is introduced. Prior to graduation, students would utilize this knowledgein their capstone design project for design of innovative energy efficient products.3. Energy efficiency testingIn recent years students of engineering technology programs of WMU have been offered capstone designprojects for innovative design
), Buffalo, NY. His interests are in power systems control, artificial-intelligence (AI) applications in Smart Grids, power electronics for Smart Grids and Advanced Protection and Automation centersDr. Ilya Y. Grinberg, Buffalo State College llya Grinberg graduated from the Lviv Polytechnic Institute (Lviv, Ukraine) with an M.S in E.E. and earned a Ph.D. degree from the Moscow Institute of Civil Engineering (Moscow, Russia). He has more than 30 years of experience in design and consulting in the field of power distribution systems and design automation. He has over 38 published papers. Currently he is professor of engineering technology at SUNY Buffalo State. His interests are in the field of electric power distribution
acquisition/analysis.With growing environmental concern and the cost of energy rising, many cost effective andenergy efficient technologies are developed. Such an example is heating water usingconventional gas/electric water heaters or renewable energy such as solar power or geothermalpower. Currently, most widely used method to heat water is by burning fossil fuels. This is oftena large factor in determining the pollution caused by heating water for commercial or residentialuse. Despite the availability of renewable energy resources, the innovations that rely upon thesealternative sources are not viable due to their uncontrollable nature and economic factors. In thispaper, the cavitation heat pump serves as a promising beacon to engineers as it may
://www.its.caltech.edu/~jsnyder/thermoelectrics/#top[2] G. Jeffrey Snyder and Eric S. Toberer "Complex Thermoelectric Materials" Nature Materials Page 23.150.127, 105-114 (2008).[3] CRC Handbook of Thermoelectrics, Introduction, Edited by D.M. Rowe, CRC Press, 1995.[4] G. Jeffrey Snyder, Tristan Ursell. "Thermoelectric efficiency and compatibility" PhysicalReview Letters, Volume 91 p. 148301 (2003)[5] Thermal Radiaton: Planck’s Law. Warren M. Rohsenow Heat And Mass TransferLaboratory. Retrieved on January 3, 2013 fromhttp://ocw.mit.edu/courses/mechanical-engineering/2-997-direct-solar-thermal-to-electrical-energy-conversion-technologies-fall-2009/audio-lectures
Paper ID #7072Center for Energy Education LaboratoryDr. Robert Gilbert, Sinclair Community College Robert B. Gilbert, Ph.D., LEED AP, BA, is an Associate Professor of Energy Management Technology, and the Director of the Center for Energy Education at Sinclair Community College, Dayton, Ohio. He is also an Adjunct Professor of Mechanical Engineering and Assistant Director of the Industrial Assessment Center at the University of Dayton, Dayton, Ohio. He serves on the Ohio Board of Building Standards filling the position Renewable Energy, is on the Board of Directors of Green Energy Ohio, is on the Faculty Renewable
Paper ID #8094Use of Various Software Tools in an Alternative Energy Systems CourseDr. Mehmet Sozen, Grand Valley State University Dr. Mehmet S¨ozen is a professor of mechanical engineering at Grand Valley State University. His general area of interest is thermo/fluid sciences with specialty in transport phenomena in porous media, thermal management of high heat flux systems and applications of alternative energy systems. Page 23.1300.1 c American Society for Engineering Education, 2013