Conference Session

Graduate Aerospace Systems Engineering Design

Collection

2005 Annual Conference

Authors

Brij Agrawal

these tasks. Recently, there has been schedule delays and cost over-runon several space programs. One of the reasons has been attributed to the lack of adequate spacesystems engineering knowledge from DoD personnel. The objective of space systems program at the Naval Postgraduate School (NPS) is toeducate DoD space cadre personnel to fill each link in the National Security-Space Chain:requirements, science and technology/research and development, acquisition, and operation. Abreak in this chain will result in failure to deliver national war fighting capabilities. This paper Page 10.1131.1provides an overview of the space systems

Conference Session

Improving Multidisciplinary Engineering Education

Collection

2005 Annual Conference

Authors

Joan Gosink; Catherine Skokan

NSFdata base provides opportunities for additional analyses. This paper classifies the 528 grants interms of NSF program, collaborative partners, annual trends, geographic location, and fundinglevel. The paper concludes with a review of successful strategies for grant-writing formultidisciplinary engineering projects.IntroductionThere have been numerous articles emphasizing the importance of interdisciplinary ormultidisciplinary research to address emerging areas in science and engineering,1, 2 to enhancethe relevancy of undergraduate engineering education,3, 5 and to utilize new technologies ininnovative applications.4 Specific topics, including bioengineering, engineering systems, andenvironmental engineering are often said to be inherently

Conference Session

Trends in Construction Engineering II

Collection

2005 Annual Conference

Authors

Erdogan Sener

Session No. 1621 Does It Also Make Economic Sense: Economics of Assessment Erdogan M. Sener Indiana University Purdue University Indianapolis (IUPUI)IntroductionThe Department of Construction Technology of the Purdue School of Engineering andTechnology (PSET) at Indiana University - Purdue University Indianapolis (IUPUI) hasoffered ABET (Accreditation Board for Engineering and Technology) accredited programssince 1984. The Department went through another accreditation visit in the Fall semester of2000 and was accredited for another six years for all of its programs. Despite the comfort andreassurance this has provided, we

Conference Session

Trends in Construction Engineering II

Collection

2005 Annual Conference

Authors

Philip Dunn

Developing a Workable Senior Construction Management Capstone Project Philip A. Dunn, Jr. PE Assistant Professor of Construction Management Technology, School of Engineering Technology, University of Maine at OronoAbstractA senior capstone course should challenge students to use the skills that they have developed intheir college experience. Because construction management curricula is so diversified, seniorcapstone projects have to be practical exercises that incorporate both business principles andprofessional construction management practice. In the spring 2004 semester at the University ofMaine, a construction management capstone class was

Conference Session

Vendor Partnerships with Engineering Libraries

Collection

2005 Annual Conference

Authors

Ruth Wolfish; Rachel Berrington; Andrew Wheeler; Jay Bhatt

partial rebates to the library for their subscription to the IEEEinformation product (contingent on predetermined IEEE Student Branch membership goals).The IEEE IEEE (The Institute of Electrical and Electronics Engineers) was formed in 1963. TheIEEE has more than 365,000 members in over 150 countries. Of that total, approximately68,000 are students. The IEEE is recognized as the preeminent international body for electricalengineering and organizes over 350 conferences each year worldwide. The IEEE is also veryactive in telecommunications, information technology, nanotechnology, robotics andbiomedical engineering and has 39 technical societies and publishes over 100 periodical titles. The IEEE has long encouraged and supported

Conference Session

Trends in Construction Engineering II

Collection

2005 Annual Conference

Authors

Brian Houston

civilengineering: the ASCE Concrete Canoe Competition and the AISC/ASCE Steel BridgeCompetition. The benefits of these programs are obvious to those who have participated.Involved students have an opportunity to learn many aspects of project management, fromconceptual design through construction. Previous surveys at Lamar University have shown thatstudents who participated in these competitions perceived their knowledge in several core areasto be greatly enhanced. Significant benefits were derived in the areas of Project Managementand Team Building. [2]Promoting student involvement in extracurricular activities is difficult at small engineering andengineering technology schools. Many factors contribute to this opposition. Engineeringstudents tend to focus

Conference Session

K-8 Engineering & Access

Collection

2005 Annual Conference

Authors

Glenn Ellis; Catherine Lewis; Susan Etheredge; Thomas Gralinski

pursued and answered thesequestions by exploring, experimenting with, and engineering pop-up books during a two-weekprofessional development summer institute, held at a four-year liberal arts college in thenortheastern United States. A team of faculty and students from the college's departments ofEngineering and Education and a secondary school technology education teacher led the project-based institute.The power and potential of pop-up books to teach teachers about engineering principles anddesign is the primary focus of the paper. The paper includes rich descriptions and examples ofthe pedagogical methods, models, and materials used to engage the teachers in paper engineeringthrough their immersion into the world of pop-up books. The

Conference Session

Graduate Aerospace Systems Engineering Design

Collection

2005 Annual Conference

Authors

Daniel Schrage

Teaching Graduate Rotorcraft Design Based on Twenty Years of Experience Dr. Daniel P. Schrage Professor and Director Center of Excellence in Rotorcraft Technology School of Aerospace Engineering Georgia Institute of Technology Atlanta, GA 30332-0150IntroductionRotorcraft is a general term for rotary-wing aircraft and includes all aircraft that include anyrotary-wing device for generating lift or propulsion for a portion of the aircraft’s flight envelope.Therefore, rotorcraft includes helicopters

Conference Session

International Engineering Education I

Collection

2005 Annual Conference

Authors

Doug Lauffer; Frank Duda; Peter Idowu

challengesand problems of science, technology and engineering education in the western Ugandaregion. The plan also includes an assessment of energy needs and alternative energypotentials of the Hoima region. The desired outcome of the experience is to outline ideas and plans for inspiringchildren and motivating them to study science. Page 10.76.2 Proceedings of the 2005 American Society for Engineering Education Annual Conference & Exposition Copyright @ 2005, American Society for Engineering Education This paper relates the observations from visits to various secondary schools andhighlights strategies

Conference Session

Collaborations Between Engineering/Education

Collection

2005 Annual Conference

Authors

Philip Parker; Jason Thrun

clear whether they have trained the teachers (Levels 3-5) to ensure success of the integration.The word “engineering” is absent from Wisconsin state standards on mathematics. We investigated the Massachusetts Science and Technology/Engineering Curriculum Framework and were greatly impressed by the ambitious scope of the standards. We compared these standards to the Wisconsin standards for mathematics and science. While the Wisconsin standards never mentioned the word “engineering,” the engineering faculty members on the team clearly saw that nearly every standard could readily be enhanced through engineering applications. Moreover, many of the “applied” science and mathematics topics are actually engineering topics without being

Conference Session

Multidisciplinary Engineering Programs II

Collection

2005 Annual Conference

Authors

Steven VanderLeest

broadlearning helps persuade the student that engineers, the designers of technology, do not design ina vacuum and the products they create reflect their creators. Thus they learn that technology isnot neutral.4 Fourth, breadth encourages a focus on fundamentals that are broadly applicable.Even when the technological details change (as they frequently do), the student in full commandof fundamental principles is well prepared to tackle the next big thing, whatever it might be.Fifth, a broader experience prepares students to work in more than one area (perhaps evenoutside of engineering). In today’s work world, career changes are common, so this preparationcan be vital. In fact, employers who hire for a very narrow set of skills may consider thatemployee

Conference Session

What's New in Engineering Economy

Collection

2005 Annual Conference

Authors

Rafael Landaeta; Bryan Magary; William Peterson

Education”Opportunities abound for change. Some of the opportunities are basic to the teaching ofengineering. Others are discipline specific. Which ones do we embrace as a discipline? Wewould like to propose an in-depth look at the presentation of the discipline to the futurepractitioner in which we take a practitioner-centric view, take advantage of technology and thestudents’ comfort with it, and add-in those active learning elements which are most effect. Wesee this as an ambitious proposal but see it as critical to the health of teaching the discipline sothat its benefits are realized and applied.Bibliographic Information1. Young, Donovan, Modern Engineering Economy, John Wiley and Sons, 19932. Nenan, Donald G., Ted Eschenbach, and Jerome

Conference Session

Multidisciplinary Engineering by Design II

Collection

2005 Annual Conference

Authors

Paul Leiffer

Five Curriculum Tools to Enhance Interdisciplinary Teamwork Paul R. Leiffer, R. William Graff, and Roger V. Gonzalez LeTourneau UniversityAbstractAn ability to function well in a multidisciplinary team has become an expectation of modernindustry and a major goal for engineering students. Since LeTourneau University offers a generalengineering degree with five concentrations, multi-disciplinary design projects naturally arise atall levels of the curriculum. Current capstone projects involve student teams from up to threeengineering disciplines, plus computer science, design technology, and marketing. Obstacles tomulti-disciplinary teamwork, including disciplinary competition

Conference Session

Multidisciplinary Engineering Courses II

Collection

2005 Annual Conference

Authors

Carol Hasenberg

and may inspire some of thestudents to pursue a design oriented career. Students are given the opportunity to explore theirown areas of interest in a two term, self selected and defined design project. The course is alsointended to soften the barrier of required technical courses that freshman technical students take,by welcoming the student into a learning community of design professionals. Students withinterest in science, technology and engineering find Design & Society far more attractive thanother FRINQ themes. Technical students, like any other university students, will also benefitfrom studying in a multidisciplinary setting. For example, engineering courses sometimesdiscuss social responsibility and ethics, but spending a full

Conference Session

Trends in Construction Engineering I

Collection

2005 Annual Conference

Authors

Virendra Varma

discipline. Itcompares the present-day BOK with the BOK of the future for construction engineeringstudents. It puts the construction engineering students at a level comparable to the levelof a civil engineering student. It defines the need for an integrated constructioncurriculum, and an integrated BOK for the future construction engineering students.Present-Day Body of Knowledge Taught in a BS-Level ConstructionEngineering/Technology DegreeConstruction professionals are builders. In recent years, the term constructor has beenused to define individuals who are builders, yet their expertise goes beyond that of homeor commercial builders. Constructors are essentially contractors who know how to buildunlike engineers who know ‘Why’ that goes with

Conference Session

International Engineering Education I

Collection

2005 Annual Conference

Authors

José O Valderrama; Carolina Ponce; Zenaida Otero Gephardt

Department at the Universidad de La Serena. Engineeringclinics were first developed at Rowan University. Students take an engineering clinic courseevery semester and work on projects in their junior and senior years. Some of these projects canrelate directly to courses or be industrial projects funded by regional and national companies.International collaborations offer students an excellent opportunity to experience the globalinteractions and technology exchanges. This is becoming more important as engineers are moreinvolved in the dynamics of the global economy.introduction and backgroundRowan University, as all institutions of higher education in the United States, strives to provide awell rounded engineering education. A well rounded education

Conference Session

Electrical & Computer Engineering Poster Session

Collection

2005 Annual Conference

Authors

Bruce Mork; Leonard Bohmann

evaluation.Bibliographic Information1. Wind and Hydropower Technologies Program: Wind Powering America, U.S. Department of Energy, Energy Efficiency and Renewable Energy, http://www.eere.energy.gov/windandhydro/windpoweringamerica/, 2005.2. U.S. Solar Radiation Resource Maps, National Renewable Energy Lab, Renewable Resource Data Center, http://rredc.nrel.gov/solar/old_data/nsrdb/redbook/atlas/, 2005.3. Criteria For Accrediting Engineering Programs, ABET Engineering Accreditation Commission, November, 2003.4. EE 3120 Term Paper, Leonard J. Bohmann, Michigan Tech, http://www.ece.mtu.edu/faculty/ljbohman/Courses/3120F04/Wind_Design.htm, 2004.Biographical InformationLEONARD J. BOHMANN is an Associate Professor of Electrical Engineering with a

Conference Session

Trends in Construction Engineering I

Collection

2005 Annual Conference

Authors

Ramakanth Mandalika; Enno Koehn

Session : Curriculum Outcome Assesment using Subject Matter on the FE Examination. Enno “Ed” Koehn, Ramakanth Mandalika Lamar UniversityAbstract:In engineering education, assessment has become a major topic as a result of the adoption of EC2000 by The Accreditation Board for Engineering and Technology (ABET). In particular, theutilization of a nationally-normed examination is one method recommended by the ABETcriteria1. In this regard, an effective and recognized tool for assessing engineering education is theFundamentals of Engineering (FE

Conference Session

International Engineering Education II

Collection

2005 Annual Conference

Authors

Gary Kardys; Abraham Michelen

technology classes at HudsonValley Community College. Methods provide students new tools to deliver accurate partsfor design purposes. With Globalspec, users can search by specification more than 75million parts representing over 1.2 million product families from more than 13,000 suppliercatalogs. By using the Globalspec search capabilities and tools, engineers can savecountless of hours of non-productive time because there is no need to use the old way ofmanually searching for precise products attributes by browsing print or PDF catalog aftercatalog for many hours, in order to find the precise electronic part needed for my project.Often individual suppliers present their product specifications using different formats orterminology. On GlobalSpec

Conference Session

Electrical & Computer Engineering Poster Session

Collection

2005 Annual Conference

Authors

Kedmon Hungwe; Seyed Zekavat; Sheryl Sorby

theinterdisciplinary service course Introduction to Electrical Engineering for all non-EE majors atMichigan Technological University. The curriculum optimizes the current 3-credit service courseby addressing: (1) the general needs of all majors through in-class lectures and lab experiments,and (2) special needs of all majors by designing a web-based teaching and lab system. In order tospecify the general and special needs of non-EE majors and form an overall curriculum for them,a survey was designed and distributed to universities and industry. Faculty members, studentsand industrial personnel responded to the survey. This work presents an analysis of the surveyand describes a preliminary overall curriculum for this course

Conference Session

International Engineering Education II

Collection

2005 Annual Conference

Authors

Waddah Akili

employees at the start of their career.Introduction:Engineering education in the Arab Gulf States (Saudi Arabia, Bahrain, Kuwait, United ArabEmirates, Qatar, and Sultanate of Oman) faces many challenges today. Changes in the externalenvironment (e.g. reduced funding, increased costs, demands by industry for well-seasonedgraduates, and rapid advances in technology) coupled with the quest for educational relevance inundergraduate engineering, are forcing colleges of engineering in the Region (the Arab GulfStates) to “rethink” engineering education and to undertake constructive steps towards reformingthe current systems 1,2,3,4The higher education arena interacts in a complex way with a variety of external partners whoserole, participation, and

Conference Session

Electrical & Computer Engineering Poster Session

Collection

2005 Annual Conference

Authors

Xiannong Meng; Luiz Perrone; Maurice Aburdene

Approaches to Undergraduate Instruction in Computer Security Luiz Felipe Perrone†, Maurice Aburdene‡, and Xiannong Meng† † Dept. of Computer Science / ‡Dept. of Electrical Engineering, Bucknell UniversityAbstractAlthough economies of scale have turned the networked computer into a commodity, its usabilityat large is determined by the levels of security and privacy the technology can offer. Thisphenomenon has created a new landscape in which the demand for trained professionals incomputer security is extremely high. Colleges and universities are still adapting to this realityand different approaches to computer security instruction are being used throughout

Conference Session

Vendor Partnerships with Engineering Libraries

Collection

2005 Annual Conference

Authors

Charles Paulsen; Amy Van Epps; Lisa Dunn; Jay Bhatt

are encouraged toensure participants understand the technology, and short assignments reinforce learning. Knovelworks with librarians to promote these sessions and continues the dialogue with attendeesafterward. On-site demonstrations are one of the most effective ways to educate users about newtechnologies and new content. The Information Services Librarian for Engineering at DrexelUniversity will discuss Knovel's use of on-site workshops to promote electronic engineeringinformation awareness. Librarians at smaller institutions often do not have the time andresources to devote to a full-scale on-site workshop. They need an "out-of-the-box" solution thatis quick to deploy with an interface that is self-evident to users. Complete integration

Conference Session

Inservice Teacher Engineering Education

Collection

2005 Annual Conference

Authors

Kathleen Crowe; Kris Wood; Richard Crawford; Daniel Jensen

An Evaluation of the DTEACh Robolab Summer Institute for 2004 – Assessment of Instructional and Hands-on Learning Correlated with MBTI types Dan Jensen Kris Wood & Rich Crawford Kathleen Crowe US Air Force Academy Univ. of Texas, Austin Technology Coordinator Dept of Engr Mechanics Dept. of Mechanical Engr. Pflugerville Independent Dan.jensen@usafa.af.mil School District1. Overview of the InstituteDuring a 2 week period the summer of 2004, the University of Texas at Austin (UTA) hosted theDTEACh ROBOLAB Automation and Control Institute. The institute is sponsored by NationalInstruments; the maker of

Conference Session

Education Ideas in Software Engineering

Collection

2005 Annual Conference

Authors

Rick Homkes; Henry Kraebber; Donna Evanecky

Analysis. Quality Press: Milwaukee, WI.7 Bowles, J., & Wan, C. (2001). Software failure modes and effects analysis for a small embedded control system. 2001 Proceedings Annual Reliability and Maintainability Symposium. IEEE: Washington, DC.8 Pressman, R. (2001). Software engineering: A practitioner’s approach. McGraw Hill: New York, NY.9 Recommended Failure Modes and Effects Analysis (FMEA) for non-automotive applications. (2000-10-18). Aerospace Recommended Practice ARP5580. SAE: Warrendale, PA.Biographical InformationRick Homkes is an associate professor of Computer Technology for the Purdue University College of Technologysite at Kokomo, Indiana. He has participated as a faculty intern for many years at Delphi Electronics

Conference Session

Improving Multidisciplinary Engineering Education

Collection

2005 Annual Conference

Authors

James Farison

pm Multidisciplinary Engineering Programs 1671 4:30 - 6:00 pm Business Meeting Tuesday, June 22 2171 7:00 - 8:15 am Multidisciplinary Programs: A Look Ahead 2471 12:30 - 2:00 pm Multidisciplinary Engineering Education by DesignThe business meeting, chaired by Dr. Gosink, was attended by 9 members. The following werethe primary items of business: Dr. Gosink announced that, on Sunday, June 20, the ASEE Board of Directors had approved the concept of assuming the role of “Lead Society” for “EAC programs in engineering (without modifiers), engineering physics, and engineering science(s), and TAC programs in engineering technology (without modifiers).” The ASEE

Conference Session

Electrical & Computer Engineering Poster Session

Collection

2005 Annual Conference

Authors

Virgilio Gonzalez; Ahmed Musa; Mehdi Shadaram

Development of a Communications Course Integrating a Virtual Laboratory and Complex Simulations Virgilio Gonzalez, Ahmed Musa Assistant Professor/ Student, ECE, University of Texas at El Paso Mehdi Shadaram Professor and Chairman, EE, University of Texas at San AntonioAbstractFaculty in the Electrical Engineering Department at UTEP created a new course incommunications to complement the preparation of students in advanced technologies. Theyimplemented a cost-effective solution by the construction of a computer-based laboratory formodeling and simulation of communication systems linked with a customized lecture. Thecourse

Conference Session

Graduate Aerospace Systems Engineering Design

Collection

2005 Annual Conference

Authors

Paul Lagace; Earll Murman

Aircraft System Design Graduate Curriculum: A Lifecycle Focus Earll M. Murman, Paul A. Lagacé Department of Aeronautics and Astronautics, and Engineering Systems Division Massachusetts Institute of Technology Cambridge, MA 02139AbstractAircraft system design encompasses technical, social and lifecycle topics, and is suitable forgraduate studies at the masters level and beyond. Several degree programs in MIT’s School ofEngineering offer opportunities for students seeking subjects and degrees in this area. Theseprograms are summarized, and one subject on

Conference Session

Architectural Engineering Education II

Collection

2005 Annual Conference

Authors

Stan Guidera

Session ____ Assessing applications for Solid Modeling (CSG) in Architectural education Dr. Stan G. Guidera College of Technology Bowling Green State University, Bowling Green, Ohio Abstract This paper discusses the functionality of solid modeling and proposes approaches toutilizing solid modeling to develop course content that emphasizes the conceptual applications ofcomputer modeling over application-specific CAD coursework. More importantly, the paperdiscusses

Conference Session

Engineering in High School

Collection

2005 Annual Conference

Authors

Robert Sherwood; Stacy Klein-Gardner

made.Students completed a short pre-test intended to measure basic understanding and a post-testcomposed of three parts: the pre-test repeated, more complex questions similar to a traditionaltest, and module specific "near-transfer" questions. On all three test sections, the experimentalgroup significantly outperformed the control group (p<0.02) as measured by ANCOVA in the2003-2004 school year. Additional field test studies are underway in the 2004-2005 school year.These results indicate that this biomedical engineering curriculum appears to have a positiveeffect on students' ability to master and apply fluid dynamics.IntroductionThe VaNTH Engineering Research Center for Bioengineering Educational Technologies isfunded by the National Science