Conference Session

Design of Laboratory Experiments

Collection

2006 Annual Conference & Exposition

Authors

Peter Avitabile, University of Massachusetts-Lowell; Tracy Van Zandt, University of Massachusetts-Lowell; Nels Wirkkala, University of Massachusetts-Lowell; Jeffrey Hodgkins, University of Massachusetts-Lowell

Tagged Divisions

Division Experimentation & Lab-Oriented Studies

definitely helped thestudents to comprehend solutions to problems where clearly defined parameters are not available as isthe case in most real-world situations.AcknowledgementSome of the work presented herein was partially funded by the NSF Engineering Education DivisionGrant EEC-0314875 entitled “Multi-Semester Interwoven Project for Teaching Basic Core STEMMaterial Critical for Solving Dynamic Systems Problems”. Any opinions, findings, and conclusions orrecommendations expressed in this material are those of the authors and do not necessarily reflect theviews of the National Science Foundation The authors are grateful for the support obtained from NSFto further engineering education.System ConstructionA complete set of drawings, bill of materials

Conference Session

NSF Grantees Poster Session

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Laura Melissa Cruz Castro, Purdue University at West Lafayette (PPI); Huma Shoaib, Purdue University; Kerrie A Douglas, Purdue University at West Lafayette (COE)

Tagged Topics

NSF Grantees Poster Session

backgroundIn 2006, Jeannette Wing, at that time, head of the computer science department at Carnegie Mellon,promoted the term computation thinking (CT). She defined computational thinking as "a range ofmental tools that reflect the breadth of the field of computer science."[1] (p.33). In this same article,Wing invited the community to see CT not only as a set of skills concerning computer scientistsbut every professional.After 2006 a significant movement of supporters of CT started to look for a formal definition andcomposition of CT. In the last 14 years, over 20 definitions and frameworks for CT have beenproposed [2], [3]. Nevertheless, although there have been increasing efforts to compile a singledefinition, those were unsatisfactory[4]. It is the

Conference Session

Assessing Design Coursework

Collection

2006 Annual Conference & Exposition

Authors

Jennifer Miskimins, Colorado School of Mines; Ramona Graves, Colorado School of Mines; Craig Van Kirk, Colorado School of Mines

Tagged Divisions

Design in Engineering Education

Conference Session

ELD Poster Session

Collection

2006 Annual Conference & Exposition

Authors

Bruce Reid, Pennsylvania State University-Wilkes-Barre

Tagged Divisions

Engineering Libraries

. Retrieved 3/13/2005 from http://www.gopsusports.com/pressreleases/pressrelease.cfm?anncid=7327 Thamel, P. (2005, February 24). Lessons in life. New York Times, p.D1. Retrieved 3/20/2005 Page 11.324.13 from the Proquest Database.Welch, J., & Welch, S. (2005). Winning. New York: HarperCollins Publishers.Wooden, J., & Jamison, S. (1997). Wooden: A lifetime of observations and reflections on and off the court. Chicago: Contemporary Books.Wooden, J., & Jamison, S. (2005). Wooden on Leadership. New York: McGraw-Hill Page 11.324.14

Conference Session

ETD Green Energy/Sustainability

Collection

2017 ASEE Annual Conference & Exposition

Authors

Jesse Gilmore, University of Houston, Downtown; Scott Patterson, University of Houston, Downtown; Lisa Deane Morano; Vassilios Tzouanas, University of Houston, Downtown

Tagged Topics

Diversity

Tagged Divisions

Engineering Technology

Fig.14: Timer Control HMIIV. ResultsThis section summarizes results which demonstrate the functionality of the system and discussproject execution from a cost and schedule viewpoint.System PerformanceInitially, to test the integrity of the sensor, an RS232 terminal named Termite was utilized. Thisterminal allows the user to send and receive data from a sensor based upon written commands.When commands were sent to the sensor through the terminal, desired responses andmeasurements were received assuring that the sensor was in good working order and ready to beemployed. Further experimentation included the testing of the sensor in dry soil and wet soil toconfirm that the sensor’s measurement numbers are consistent and reflect nominal values

Conference Session

Revolutionizing Engineering Departments (RED)

Collection

2017 ASEE Annual Conference & Exposition

Authors

Susan M. Lord, University of San Diego; Edward J. Berger, Purdue University, West Lafayette (College of Engineering); Nadia N. Kellam, Arizona State University; Ella Lee Ingram, Rose-Hulman Institute of Technology; Donna M. Riley, Virginia Polytechnic Institute and State University; Diane T. Rover, Iowa State University; Noah Salzman, Boise State University; James D. Sweeney, Oregon State University

Tagged Topics

Diversity

Tagged Divisions

Educational Research and Methods

: built into the key program features were evaluation criteriathat efforts be “radically, suddenly, or completely new; producing fundamental, structuralchange; or going outside of or beyond existing norms and principles” [6]. With an innovativedepartment head or dean at the helm, change had to be rooted in engineering education research,a social science understanding of organizations, and a theoretical change framework that couldmove research to practice, with team composition reflecting this varied expertise. Facultydevelopment efforts, incorporation of professional practice, and a plan for scalability thatcountered anticipated obstacles had to be baked in to the original vision and project plan.With NSF investing relatively large amounts of

Conference Session

Manufacturing Curriculum and Course Innovations

Collection

2017 ASEE Annual Conference & Exposition

Authors

Ryan W. Krauss, American Society of Mechanical Engineers; Arjumand Ali, Grand Valley State University; Amy L. Lenz, Grand Valley State University

Tagged Topics

Diversity

Tagged Divisions

Manufacturing

reflects less understanding thantalking about which first order pole is slowest.Question 2Question 2 is a bit of a philosophical one that probes the students understanding of the definitionof a transfer function. Students are given time domain expressions of the input and output of asystem and asked to find the transfer function. If students remember that a transfer function is theLaplace transform of the output divided by the Laplace transform of the input, this problemshould be fairly straight forward. Ideally, students will also remember the instructors’ preferencesthat a transfer function be given as a proper fraction with one polynomial of s in the numeratorand one polynomial in the denominator.Question 2 Problem Statement ∙ You are given a

Conference Session

Pre-college: Blending Computers, Computational Thinking, and Engineering Education

Collection

2017 ASEE Annual Conference & Exposition

Authors

Andrea Carneal Burrows Borowczak, University of Wyoming; Mike Borowczak, University of Wyoming

Tagged Divisions

Pre-College Engineering Education Division

, Engineering Education1. Introduction – Research to Practice PaperEngineering education, and especially computer science (CS) within that realm, is embeddedwithin science, technology, engineering and mathematics (STEM), but K12 classroom practicesdo not often reflect CS content due in part to teacher skill levels and an efficacy gap. CS can takeon many meanings, but at its core, it is the science of problem solving in a computationalcontext, and CS as a skill is challenging (Burrows, Borowczak, Slater, & Haynes, 2012). MostCS university programs prepare software engineers, and as such the subjects are entwined. Thedistinction between engineering and CS can be blurry if only examining the theory of CS insteadof the practical applications. This

Conference Session

Computing Technology Session 1

Collection

2017 ASEE Annual Conference & Exposition

Authors

Emre Tokgoz, Quinnipiac University

Tagged Divisions

Computers in Education

responses. The nature of quantitativeresults consist of probabilities that reflect the students’ technology preferences and the variationanalysis of the programming preferences across different research questions. The results presentedin this paper help to determine and understand engineering students’ technology choices forsolving different calculus problems based on their technology education. The participants of thisInstitutional Review Board (IRB) approved research completed the third calculus course of a four-course calculus sequence. This article is a continuation of another IRB approved research that wasconducted by the researcher at a large Midwest U.S. institution.Key Words: Computer programming preference; Undergraduate education

Conference Session

Curricular Issues in Computing

Collection

2017 ASEE Annual Conference & Exposition

Authors

Secil Caskurlu, Purdue University; Iryna Ashby, Purdue University; Marisa Exter, Purdue University

Tagged Topics

Diversity

Tagged Divisions

Computing & Information Technology

Proceedings of the 45th ACM Technical Symposium on Computer Science Education (pp. 355-360). ACM.15 Exter, M., & Turnage, N. (2012). Exploring experienced professionals’ reflections on computing education. ACM Transactions on Computing Education (TOCE), 12(3), 12.16 Lethbridge, T. C. (2000). What knowledge is important to a software professional? Computer, 33(5), 44-50.17 Andriole, S. J. and Roberts, E. (2008). Technology curriculum for the early 21st century. Retrieved from http://cacm.acm.org/magazines/2008/7/5359-point-counterpoint- technology-curriculum-for-the-early-21st-century/fulltext 21Formal

Conference Session

Qualitative Research Methods

Collection

2017 ASEE Annual Conference & Exposition

Authors

Diana Jaleh Arya, University of California, Santa Barbara; Noreen Balos, University of California, Santa Barbara; Maria Teresa Napoli, University of California, Santa Barbara; Elizabeth Sciaky, University of California, Santa Barbara

Tagged Topics

Diversity

Tagged Divisions

Educational Research and Methods

& Lechuga, 2017; Trowler, 2014).Researching such learning communities involves a systematic exploration of many contextualaspects, including “the culture of the institution, the administrative hierarchy, students, faculty,and external constituencies” (Pasque & Lechuga, 2017, p. 2).The recent surge in ethnographic or participant-centered, qualitative research in higher educationaligns with an increased awareness that classrooms, programs, lectures, work sessions and thelike all operate within a system that is multilayered and often hierarchical (Bryk, Sebring,Allensworth, Easton, & Luppescu, 2010). As such, final scores or reflections may hint at thecomponents, activities, and resources most useful to, or constraining the

Conference Session

Edifying Engineering Education through Multidisciplinary Efforts

Collection

2017 ASEE Annual Conference & Exposition

Authors

Nael Barakat P.E., Texas A&M University, Kingsville; David Ramirez, Texas A&M University, Kingsville; Selahattin Ozcelik, Texas A&M University, Kingsville; John Austin McCoy, Texas A&M University, Kingsville; Aws Al-Shalash; Jong-Won Choi, Texas A&M University, Kingsville

Tagged Topics

Diversity

Tagged Divisions

Multidisciplinary Engineering

Conference Session

Action on Diversity - Disability Experiences & Empathy

Collection

2017 ASEE Annual Conference & Exposition

Authors

Fernando Garcia Gonzalez, Florida Golf Coast University

Tagged Topics

ASEE Diversity Committee, Diversity

,” Academic Exchange Quarterly, 2007. 3. http://idea.ed.gov/explore 4. The State of Learning Disabilities, 3rd edition, 2013, National Center for Learning Disabilities. 5. “Academic accommodations for students with learning disabilities,” Disabilities, Opportunities, Internetworking, and Technology (DO-IT), University of Washington, 2012. 6. U.S. Department of Education, National Center for Education Statistics, 2016. 7. U.S. Department of Education, National Center for Education Statistics, 2011, Table 4. 8. “For your consideration… suggestions and reflections on teaching and learning,” University of North Carolina Center for Faculty Excellence, Nov. 2009. 9. Lyman, F. T. (1992). Think-Pair

Conference Session

Engaging Faculty Across Disciplines, Colleges, and Institutions

Collection

2017 ASEE Annual Conference & Exposition

Authors

Mei-Mei Song, Tamkang University; Shang-Hsien Hsieh, National Taiwan University; Shih-Yao Lai, National Taiwan University, Graduate Institute of Building and Planning

Tagged Divisions

Multidisciplinary Engineering

towards interdisciplinary cooperation in the next phase, which isa long way from the initial state three years ago when we were not quite familiar with oneanother’s areas of expertise, it would be worthwhile to share our reflections on the journeywith other teachers.Context Over the course of 3-year-cooperation (from December 2013 to November 2016), threecurricular experiments were conducted consecutively in the Spring Semesters (i.e., Februaryto June) from 2014 to 2016 at National Taiwan University (NTU) in Taiwan. The firstexperiment was meant to be an initial try-out, embedding two 8-hour sessions of futuresthinking curriculum in an existing selective advanced CE course, with the purpose offamiliarizing engineering teachers with futures

Conference Session

Minorities in Engineering Division Technical Session 6

Collection

2017 ASEE Annual Conference & Exposition

Authors

Aldo Morales, Pennsylvania State University, Harrisburg; Sedig Salem Agili, Pennsylvania State University, Harrisburg, The Capital College; Sofia M Vidalis, Pennsylvania State University, Harrisburg; Linda M. Null, Pennsylvania State University; Jennifer Leigh Sliko, Pennsylvania State University, Harrisburg

Tagged Topics

Diversity

Tagged Divisions

Minorities in Engineering

, as well as publishing papers in conference or in journals.In summary, as depicted by the testimonials, the results of assessing the peer mentoring,undergraduate research output, and post-graduation placement, our NSF STEM program,coupled with well-designed support services, helps students successfully complete theirundergraduate studies and secure a bright future for themselves. Further longitudinal assessmentsare forthcoming.References[1] S. Agili, A. Morales, L. Null, J. Smith, and S. Vidalis, “Reflections on Experiences of a Successful STEM Scholarship Program for Underrepresented Groups,” Proceedings of 2015 ASEE Conference, Seattle, Washington June 14-June 17, 2015.[2] P. Hubel, “Student Satisfaction: An Examination of

Conference Session

Entrepreneurship & Engineering Innovation Division Poster Session

Collection

2017 ASEE Annual Conference & Exposition

Authors

Christopher Kitts, Santa Clara University; Anne Mahacek, Santa Clara University

Tagged Topics

Diversity

Tagged Divisions

Entrepreneurship & Engineering Innovation

entity along the lines of a maker lab? In somecases, existing facilities are rebranded, but in other cases, brand new spaces are created.The “origin story” of SCU’s maker lab is that of a new space that grew out of a desire for anenhanced level of accessibility to a broad set of tools of making. SCU’s School of Engineeringhas a well-equipped, maintained and managed suite of standard fabrication/assembly/test labs.These shops have been developed, operated, and maintained by individual departments, withpolicies and use reflecting decades of practice. Traditional shop use typically serves students ina single department once students reach a specific point in their program. While these shopsserve their traditional purpose well, they are not at all

Conference Session

Pre-College: Perceptions and Attitudes on the Pathway to Engineering (3)

Collection

2017 ASEE Annual Conference & Exposition

Authors

Araceli Martinez Ortiz, Texas State University, San Marcos; Laura Rodriguez Amaya, Texas State University; Hiroko Kawaguchi Warshauer, Texas State University; Sara Garcia Torres M.Ed., Texas State University, San Marcos; Erin Scanlon, Texas State University; Michelle Pruett, Texas State University

Tagged Topics

Diversity

Tagged Divisions

Pre-College Engineering Education Division

leadingthem to construct and organize patterns of ideas (logico-mathematical knowledge) and throughsocial experiences (social-conventional knowledge; Piaget, Henriques, & Ascher, 1992). Theactivities utilizing design in engineering education serve as a potential context for providing thekinds of experiences Piaget alluded to in his research, as these experiences allow the learner toactively engage in his or her own learning process, reflect on the use of existing structures ofknowledge, and benefit from scaffolded learning in an environment that values participation andinteraction among students, teachers, and other resources (deMiranda, 2004; Loewenberg Ball,2010).Engineering Problem Solving & Design as Context Curricular units and

Conference Session

Aerospace Hot Topic: Unmanned Aerial Systems

Collection

2017 ASEE Annual Conference & Exposition

Authors

Michael C. Hatfield, University of Alaska, Fairbanks; Catherine F. Cahill, Alaska Center for UAS Integration, University of Alaska, Fairbanks; John Monahan, University of Alaska, Fairbanks, Upward Bound

Tagged Divisions

Aerospace

aerospaceinfrastructure. These include the incorporation of multiple new UAS/aerospace academiccourses, implementation of several research projects for undergraduate and graduate students,and creating a new aerospace engineering minor (beginning AY2015-2016). Each of theseefforts has proven popular with students and has brought positive awareness to UAF programs.MotivationAs is broadly reflected in societal trends, UAF is also experiencing a huge increase in demandfor UAS-related courses, training, and activities. UAS are currently in demand within virtuallyall sectors of society – federal, state, and local agencies, industry, small business, andentrepreneurs – all have growing interest in the application of UAS to their missions. Forstudents and our education

Conference Session

Entrepreneurship & Engineering Innovation Division Poster Session

Collection

2017 ASEE Annual Conference & Exposition

Authors

Wei Zhang, Zhejiang University; Yuexin Jiang, Zhejiang University; Xiaofeng Tang, Pennsylvania State University

Tagged Topics

Diversity

Tagged Divisions

Entrepreneurship & Engineering Innovation

interdisciplinary model for engineering education in ZJU is reflected in ACEE (Advanced HonorClass of Engineering Education. Through integrating interdisciplinary general education,professional education, and comprehensive innovation education, ACEE prepares professionallycompetent engineering leaders who are capable of organizing and leading projects in key areas ofengineering and technological innovations, and has been recognized as a national “ExperimentalZone for Paradigm Innovation in Educating Comprehensive Engineering Talents.” ACEE emphaseson “fundamentals, design, and creation,” aiming to educate comprehensive engineering talents whoare solidly grounded in the natural sciences, have strong ethical principles, and display command ofengineering

Conference Session

Software and Related Tools for Teaching and Course Efficiencies

Collection

2017 ASEE Annual Conference & Exposition

Authors

Amir Karimi P.E., University of Texas, San Antonio; Randall D. Manteufel P.E., University of Texas, San Antonio

Tagged Divisions

Mechanical Engineering

students’ difficulties. An effective practice is to rephrase andrepeat questions at the end of a lecture or the start of the next lecture. The technique of adaptivequestioning is effective at addressing common persistent misunderstandings. Examples of thesequence of questions are described. Student feedback shows the use of frequent and persistentquestions which focus on fundamental concepts are effective at improving student mastery offundamental concepts.IntroductionMany engineering students have difficulty explaining the fundamental concepts used in solvingengineering problems. They succeed at algorithmic problem solving but have difficulty explainingthe physical systems being described. This is reflected in low scores on concept inventoryexams

Conference Session

Construction 2: Teaching Using Projects, Case Studies, and Service Learning

Collection

2017 ASEE Annual Conference & Exposition

Authors

Denise Diana Gravitt, Western Illinois University

Tagged Divisions

Construction

debate case study to reflect the increasing level of difficulty oftopics and the decreasing amount of information provided by the instructor. The students wereprovided with a scored points outline (see Appendix B) attached to their written research papersso they were aware of the strengths and weaknesses of their research and debate preparation foreach case study.Summary and Lessons LearnedThe legal course was taught two times with the same text book before introduction of debates inthe course. The reason for introduction of the debates was not to improve overall course grades,which were in the 83% to 85% overall for those two semesters, but in the hopes of improvingstudent participation, motivation for learning the materials, and understanding

Conference Session

Engineering Economy Division Technical Session 3

Collection

2017 ASEE Annual Conference & Exposition

Authors

James D Burns, Purdue Univeristy; Bob E. White P.E., Western Michigan University

Tagged Topics

Diversity

Tagged Divisions

Engineering Economy

semester, we believe there is great value in students working with the two new subjects(Capital Budgeting and VBA) over time and within the same context (the simulation).Development work is distributed throughout the first two-thirds of the semester to create a senseof flow in relation to the topics of the course. After development, students use the remainder ofthe semester to examine peer-reviewed literature in order to find other methods for ranking andselecting projects, to design new or novel approaches to project selection, and to modify thesimulation model to better reflect real-world operating environments. Students then use thesimulation model to perform experiments and test hypotheses related to research objectives theydefine.Of course

Conference Session

Computing Technology Session 3

Collection

2017 ASEE Annual Conference & Exposition

Authors

Peter J Clarke, Florida International University; Debra Lee Davis, Florida International University; Raymond Chang Lau, Florida International University; Yujian Fu P.E., Alabama A&M University; James D Kiper, Miami University; Gursimran Singh Walia, North Dakota State University

Tagged Divisions

Computers in Education

introduction to the instructors’view of WReSTT-CyLE, one (1) session on using DLOs in WReSTT-CyLE, two (2) sessions on de-signing and conducting a research study, and two (2) sessions on using software testing tools in theclassroom. Additional details of the workshops can be found at http://wrestt.cis.fiu.edu/events.On average for each WISTPC workshops held at FIU, there were 19 applications for the work-shops, 14 applicants attended the workshops, 27 total attendees (including PIs and students) at-tended the workshops, and 18 institutions were represented at the workshops. Based on the surveysconducted at the workshops the attendees found the workshops to be very helpful, relevant to theircourses and interesting. This was reflected in attendees

Conference Session

Pre-College: Fundamental Research in Engineering Education (1)

Collection

2017 ASEE Annual Conference & Exposition

Authors

Emilie A Siverling, Purdue University, West Lafayette (College of Engineering); Elizabeth Suazo-Flores, Purdue University; Corey A Mathis, California State University, Bakersfield; Tamara J Moore, Purdue University, West Lafayette (College of Engineering); Siddika Selcen Guzey, Purdue University, West Lafayette (College of Engineering); Kyle Stephen Whipple, University of Minnesota

Tagged Topics

Diversity

Tagged Divisions

Pre-College Engineering Education Division

redesign. The practice of engineering requires the application of Apply Science, Engineering, science, mathematics, and engineering knowledge and Mathematics Knowledge engineering education at the K-12 level should emphasize (SEM) this interdisciplinary nature. Students should be independent and reflective thinkers Engineering Thinking capable of seeking out new knowledge and learning from

Conference Session

Multidisciplinary Design Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

Alireza Yazdanshenas, University of Texas, Tyler ; Caleb Nathaniel Nehls, The University of Texas, Tyler; Chung-Hyun Goh, University of Texas, Tyler

Tagged Divisions

Multidisciplinary Engineering

-engineering majors.This reflects the fact that the interdisciplinary disciplines are essential to develop recent cuttingedge technology. These results can be seen in Figure 9. 83% Engineering 62% No 38% Majors Experience Experience in MDP in MDP 17% Non-Engineering

Conference Session

Emerging Computing and Information Technologies I

Collection

2017 ASEE Annual Conference & Exposition

Authors

Tamer Omar, East Carolina University; Philip J. Lunsford II, East Carolina University

Tagged Divisions

Computing & Information Technology

resources, lab materials (questions templatesand manual), operating systems, software applications and programs are required at least everytwo years. Due to the continuous advancement of technology, the different resources, systems andtools used to implement the network security lab environment must be regularly reviewed to ensurethat the lab environment reflects the current technology used in industry.The rest of the paper is organized as follows. In section two a background about the lab modelincluding lab structure, components, lab support system and the tools used are presented. Sectionthree demonstrates the evaluation methodology. Analysis of the student survey, and feed-backregarding their lab experience during the course and the lessons

Conference Session

Investigating Instructional Strategies

Collection

2017 ASEE Annual Conference & Exposition

Authors

Ada Hurst, University of Waterloo; Mehrnaz Mostafapour, University of Waterloo; Rania Al-Hammoud P.Eng., University of Waterloo; Andrea Prier, University of Waterloo; Erin Jobidon, University of Waterloo; Carol Hulls P.Eng., University of Waterloo; Christopher Rennick, University of Waterloo; Jason Grove P.E., University of Waterloo; Eugene Li, University of Waterloo; Sanjeev Bedi P.Eng., University of Waterloo

Tagged Divisions

Multidisciplinary Engineering

engineeringundergraduates. To accomplish this, it has chosen a method which lies mid-way between the twoextremes found in typical engineering curricula, namely self-learning and explicit courseinstruction. In the selected model, the cost to a specific course, or academic term, is small, andthe distributed nature of the modules (once per term for the first three years of the program)enhances their impact by keeping teamwork always “front of mind” for students.Upon reflection, the success of the team’s initiative can be largely attributed to the team’scharacteristics as a well-functioning team, made up of people with complementary expertisewhich covers the broad spectrum required to teach teamwork skills to engineering students whilenavigating significant and varied

Conference Session

Motivation

Collection

2017 ASEE Annual Conference & Exposition

Authors

Meagan R. Kendall, University of Texas, El Paso; Michele Carolynn Williams, University of Texas, El Paso

Tagged Divisions

Educational Research and Methods

of Peer Designed Instruction? 2. Does Peer Designed Instruction increase student motivation when compared to other courses students have taken at the University of Texas at El Paso? 3. Does motivation in this context change based on gender? 4. Does motivation in this context change based on the student having been a Student Instructor?To answer these questions, a mixed-methods approach was used to collect student feedback via athree-part survey. In the first part, a series of multiple choice and open-ended questions wereincluded to allow students the opportunity to reflect on their experience. Questions one throughten are a set of introductory open-ended questions related to the

Conference Session

Division Experimentation and Lab-Oriented Studies - Best of DELOS

Collection

2017 ASEE Annual Conference & Exposition

Authors

Jenna P. Carpenter, Campbell University; Lee Kemp Rynearson, Campbell University

Tagged Divisions

Division Experimentation & Lab-Oriented Studies

communicate their role as co-learners, or stifle both. It suggests that today’sstudents are interested in small group workspaces, access to tutors and faculty, table space thatsupports a variety of learning tools (books, laptops, projects), integrated lab facilities, ITintegrated into learning spaces, availability of labs/equipment, accessible facilities, sharedcommunication spaces, and workgroup facilitation. Moreover, research on learning theorysuggests that supportive spaces should reflect flexibility, comfort, sensory stimulation,technology support and decenteredness.4 There are numerous initiatives which have restructuredclassroom spaces to support active learning. Some programs have also used a studio design toteach courses with some lab

Conference Session

Improving Presentation Skills Through Summer Research and Ambassador Programs

Collection

2017 ASEE Annual Conference & Exposition

Authors

Joanna K. Garner, Old Dominion University; Michael Alley, Pennsylvania State University, University Park; Christine Haas, Engineering Ambassadors Network; Suzanne Sontgerath, Worcester Polytechnic Institute; Avi Kaplan, Temple University

Tagged Topics

Diversity

Tagged Divisions

Liberal Education/Engineering & Society

. For many, the ambassador rolebegins during a large, multi-institution workshop. Post-event surveys reveal high levels ofability, confidence, and preparedness to create and deliver outreach presentations. Post-workshopinterviews reveal that the training offers a platform for role identity development. Theambassador role aligns career-related motivations, resonance with messages contained in theNational Academy of Engineering’s Changing the Conversation report, beliefs about the missionof the EAN, and plans for fulfilling the Network’s mission. After the initial training, students’role identities reflect an integration of their undergraduate engineering student role with the newrole of ambassador, with the intermediary role of an effective