Conference Session

Integrating Sustainability Across the Curriculum

Collection

2012 ASEE Annual Conference & Exposition

Authors

Stefan J. Grimberg, Clarkson University

Tagged Divisions

Environmental Engineering

panels was distributed to the local extension services for further dissemination with the opportunity to secure further input in the design. (3) the operation and implementation of a prototype system at a local extension farm and (4) the communication of the process to government and industry stake holders through annual participation of the team at the P3 competition meeting.In order to determine optimum process operating conditions, three laboratory scale reactors wereoperated throughout the first year of Phase 2 project. Three hydraulic residence times (HRT)were tested, 10 days, 15 days, and 20 days all using 5 liters of liquid volume mixed reactorsoperated at 37 ºC. As expected the 20 day HRT digester had the highest volatile solids

Conference Session

Online Learning

Collection

2012 ASEE Annual Conference & Exposition

Authors

Grant Huang, University of Texas, San Antonio; Andreas Gampe, University of Texas, San Antonio; Arsen Melkonyan, University of Texas, San Antonio; Murillo Pontual, University of Texas, San Antonio; David Akopian, University of Texas, San Antonio

Tagged Divisions

Computers in Education

Antonio (UTSA). He joined UTSA in 2003 where he founded Software Communication and Navigation Systems Laboratory. He re- ceived the M.Sc. degree in radio-electronics from the Moscow Institute of Physics and Technology in 1987 and Ph.D. degree in electrical engineering from the Tampere University of Technology (TUT), Fin- land, EU, in 1997. From 1999 to 2003, he was a Senior Engineer and Specialist with Nokia Corporation. Prior to joining Nokia in 1999, he was a member of teaching and research staff of TUT. His current re- search interests include digital signal processing algorithms for communication and navigation receivers, positioning methods and mobile applications, and remote labs

Conference Session

Innovative Energy Projects

Collection

2012 ASEE Annual Conference & Exposition

Authors

Faruk Yildiz, Sam Houston State University; Keith L. Coogler, Sam Houston State University; Reg Recayi Pecen, University of Northern Iowa

Tagged Divisions

Energy Conversion and Conservation

ingreenhouse gas emissions. In order to implement renewable energy in projects, qualifiedpersonnel take a very important role in planning and design prior to project implementation.Education and training of workforce who will be involved in the projects is important and shouldbe taken into account when investments are considered to execute projects, so that there will bequalified personnel. In preparing students for their future career, real-world experiences andhands-on training is an important part of their education. Research projects and laboratories areexcellent teaching aids for providing students with opportunities to implement the theory theylearn in class. Educating the younger generations about sustainable and clean energy sources isvital to

Conference Session

New Classrooms, New Challenges II: Assessing Non-traditional Approaches

Collection

2012 ASEE Annual Conference & Exposition

Authors

Richard L. Zollars, Washington State University; Adam Scott Carter, Washington State University; Christopher Hundhausen, Washington State University

Tagged Divisions

Chemical Engineering

classwould seem to be a large impediment for using SBL. With the advent of the numerous,asynchronous communication media now available this no longer need be a barrier.Prior WorkThe desire to seek improvements in teaching strategies in material/energy balance classes startedwith the observation that approximately 35% of the students enrolling in such classes eitherdropped out of the class, failed the class or received a grade lower than a “C”. This statisticseemed to be constant no matter who taught the course and also appeared to be the situation atother universities. In 2006 pairs of students from the material/energy balance course were askedto participate in a laboratory study in which they were observed solving problems typical of theclass

Collection

2012 EDI

Authors

Roger Stancliff

/defense disease research Forensics, drugs of abuse Low-cost instrumentation Agilent g Research Laboratories Enabling technology breakthroughs across Agilent Agilent Profile3 April 2012 Advances in Fundamental Knowledge Measurement Technology Advances Improvements

Conference Session

K-12 Experiences in Energy Education

Collection

2012 ASEE Annual Conference & Exposition

Authors

Jana Sebestik, University of Illinois, Urbana-Champaign; Quanyan Zhu, University of Illinois, Urbana-Champaign

Tagged Divisions

Energy Conversion and Conservation

AC 2012-3865: AN INTERACTIVE K-12 ENGINEERING CURRICULUMDEVELOPMENT ON RENEWABLE SOURCES AND ENERGY STORAGEAND IN POWER SYSTEMSJana Sebestik, University of Illinois, Urbana-Champaign Jana Sebestik received a B.S. in mathematics and M.Ed. in mathematics education from the University of Illinois, Urbana-Champaign. She has 34 years of classroom experience teaching mathematics in grades 7-12. She is currently a curriculum specialist at the Office for Mathematics, Science, and Technology Education (MSTE) in the College of Education at the University of Illinois, Urbana-Champaign, and Education Lead for Trustworthy Cyber Infrastructure for the Power Grid (TCIPG). MSTE works with mathematics and science teachers to

Conference Session

How Are We Preparing Our Students for the 21st Century Workforce?

Collection

2012 ASEE Annual Conference & Exposition

Authors

Ronald H. Brown, Marquette University; Thomas F. Quinn, Marquette University; George Corliss, Marquette University; Jay R. Goldberg, Marquette University; Mark Nagurka, Marquette University

Tagged Divisions

Cooperative & Experiential Education

Wooster (Ohio) and his Ph.D. in mathematics from Michigan State University. He has taught and worked at the Uni- versity of Nebraska, Lincoln, University of Wisconsin, Madison, Swiss Federal Institute of Technology, Argonne National Laboratory, Karlsruhe Institute of Technology (Germany), Compuware Corp., and Mar- quette University, as well as in several industrial and consulting positions. His research interests include scientific computation and mathematical modeling, guaranteed enclosures of the solutions of ordinary differential equations, industrial applications of mathematics and scientific computation, numerical opti- mization, automatic differentiation, and software engineering. He teaches courses in

Conference Session

BME Course and Curriculum Development

Collection

2012 ASEE Annual Conference & Exposition

Authors

Kurt A. Thoroughman Ph.D., Washington University, St. Louis; Ranjan Patrick Khan, Washington University, St. Louis; Haoxin Sun, Washington University, St. Louis; Patricia L. Widder, Washington University, St. Louis

Tagged Divisions

Biomedical

material through repetition. Aunique advantage to the CL sequence, however, arises from a constructivist approach. Accordingto a recent review by McDaniel and Wooldridge9, “Constructivist teaching methods … differfrom traditional education in that students are expected to take responsibility for their ownlearning in order to actively create knowledge structures.” The sequence of CLs requiredstudents to build explicit models of instrumentation, control systems, sensation, bioelectricity,and biomechanics within a repeated Simulink environment, with explicit callbacks to previouslabs. The students therefore found, and reported upon, connections in the mathematical modelsacross topically different material. The laboratory environment encouraged

Conference Session

Innovative Learning, Comparative Learning Analysis, and Lessons Learned

Collection

2012 ASEE Annual Conference & Exposition

Authors

Mohammad Saleh Keshawarz, University of Hartford; Hisham Alnajjar, University of Hartford; Azizurahman Azimi, Herat University

Tagged Divisions

International

at HU spent a month at UH in September/November 2008 and anothermonth in September 2009. He shadowed the Associate Dean of Engineering at UH. Shadowingactivities included: 1. Observation of engineering classes at different levels. 2. Supervised assistance teaching a variety of engineering courses to develop a variety of pedagogical models and options. 3. Developing course(s) for HU, particularly in an electronic/computer-based classroom or for distance learning environment. One point of emphasis is the development of future shared projects between UH and HU students. 4. Observation, study, and practice of administrative and management skills, including ongoing faculty and curriculum development and revision. 5

Conference Session

Manufacturing Education for Emerging Technologies and Competitiveness

Collection

2012 ASEE Annual Conference & Exposition

Authors

Yalcin M. Ertekin, Drexel University; Richard Chiou, Drexel University

Tagged Divisions

Manufacturing

technology discipline.At the undergraduate level, many courses related to robotics, design, and materials are offered tothe students in the Bachelor of Science in Engineering Technology program. Courses such asRobotics and Mechatronics, Quality Control, Manufacturing Materials, Microcontrollers, andApplied Mechanics can benefit from the laboratory experience in applications of mechatronics,robotics, and rapid prototyping. As well as helping in the teaching of various courses, suchexperience benefits students who are pursuing degrees in the engineering field. Students in theMechanical, Electrical, and Industrial fields along with many others can learn many new skills

Collection

2012 Spring ASEE Middle Atlantic Section Conference

Authors

Laura-Ann S. Chin; Kenneth A. Kroos; Justinus A. Satrio

  scope   through   scale-­‐up   of   laboratory   work   to   a   biodiesel   processing  plant  while  incorporating  whole  systems  thinking  of  sustainability.     2. Introduction:   Well-­‐designed   first   year   experience   courses   are   mainstays   in   the   curriculum   for   freshman   engineering   students,  as  well  as  for  freshmen  in  other  fields.  First  year  courses  are  building  blocks  in  helping   freshmen   navigate   through

Collection

2012 ASEE Zone 1 Conference

Authors

Laura-Ann S. Chin; Kenneth A. Kroos; Justinus A. Satrio

  scope   through   scale-­‐up   of   laboratory   work   to   a   biodiesel   processing  plant  while  incorporating  whole  systems  thinking  of  sustainability.     2. Introduction:   Well-­‐designed   first   year   experience   courses   are   mainstays   in   the   curriculum   for   freshman   engineering   students,  as  well  as  for  freshmen  in  other  fields.  First  year  courses  are  building  blocks  in  helping   freshmen   navigate   through

Conference Session

Faculty and Program Developments, Exchanges, and Best Practices

Collection

2012 ASEE Annual Conference & Exposition

Authors

Brian P. Self, California Polytechnic State University; Peter Wolfsteiner, Munich University of Applied Sciences

Tagged Divisions

International

AC 2012-3668: REFLECTIONS ON INTERNATIONAL EXCHANGE OFSTUDENTS AND PROFESSORS IN MECHANICAL ENGINEERINGDr. Brian P. Self, California Polytechnic State University Brian P. Self obtained his B.S. and M.S. degrees in engineering mechanics from Virginia Tech and his Ph.D. in bioengineering from the University of Utah. He worked in the Air Force Research Laboratories before teaching at the U.S. Air Force Academy for seven years. Self has taught in the Mechanical En- gineering Department at Cal Poly, San Luis Obispo, since 2006. During the 2011-2012 academic year, he participated in a professor exchange, teaching at the Munich University of Applied Sciences. His engineering education interests include collaborating

Conference Session

K-12 Experiences in Energy Education

Collection

2012 ASEE Annual Conference & Exposition

Authors

Liping Guo, Northern Illinois University; Mansour Tahernezhadi, Northern Illinois University

Tagged Divisions

Energy Conversion and Conservation

learning in biomedical engineeringcurricula", in Proc. 31st Annual Frontiers in Education Conference, Oct 2001, Vol. 2, pp. 16-21.10. M. Cline and G. J. Powers, "Problem based learning via open ended projects in Carnegie Mellon University'schemical engineering undergraduate laboratory", Proc. of 27th Annual Frontiers in Education Conference, Nov1997, Vol. 1, pp. 350-354.11. P. Van Kampen, C. Banahan, M. Kelly, E. McLoughlin and E. O'Leary, "Teaching a single physics modulethrough problem-based learning in a lecture-based curriculum", American Journal of Physics, Vol. 72, No. 6, pp.829-834, June 2004. Page 25.1066.6

Conference Session

BME Course and Curriculum Development

Collection

2012 ASEE Annual Conference & Exposition

Authors

Steve R Marek, University of Texas, Austin; William Liechty, University of Texas, Austin; James W. Tunnell, University of Texas, Austin

Tagged Divisions

Biomedical

teaching responsibilities comprises the biomedical engineering laboratory courses. His previous research interests included small- molecule organic synthesis, intelligent hydrogels for controlled drug delivery, pulmonary drug delivery, and materials characterization.Mr. William Liechty, University of Texas, Austin William B. Liechty is a NSF Graduate Research Fellow in the Department of Chemical Engineering at the University of Texas, Austin, conducting research under the direction of Prof. Nicholas Peppas. He re- ceived a B.S.E. in chemical engineering from the University of Iowa in 2007 and studied at the University of Cambridge as a Gates Scholar until 2008. His research interests include responsive materials, RNA

Conference Session

Projects in Alternative Energy: Wind and Solar

Collection

2012 ASEE Annual Conference & Exposition

Authors

Reg Recayi Pecen, University of Northern Iowa; Faruk Yildiz, Sam Houston State University; Bekir Z. Yuksek, University of Northern Iowa; Ulan Dakeev, University of Northern Iowa; Kenan Baltaci, University of Northern Iowa

Tagged Divisions

Energy Conversion and Conservation

wind turbine with a Power SinkII utility intertie module (208 V/240V AC, 60 Hz), and related power and instrumentation/dataacquisition hardware with a major funding from Iowa Alliance for Wind Innovation and NovelDevelopment (IAWIND.org). The electricity generated by this power station is used as arenewable energy input for a smart grid based greenhouse educational demonstration project toaid the teaching and research on wind power system development, wind turbine and towerselection, smart grid and energy efficiency issues8-11. The following classes use this proposedtestbed as a laboratory/demonstration activities; Introduction to Electrical Power/Machinery,Advanced Electrical Power Systems, Wind Energy Applications, and Wind EnergyManagement

Conference Session

NSF Grantees' Poster Session

Collection

2012 ASEE Annual Conference & Exposition

Authors

Hirak C. Patangia, University of Arkansas, Little Rock

Tagged Topics

NSF Grantees Poster Session

engineering as a career path or for personal enrichment. He has written a textbook and a laboratory manual for the course ”Introduction to Electronics and Electrical Systems: A PBL Approach.” He has received numerous awards for teaching excellence at UALR, including the Donaghey Outstanding Teacher Award. He has also received recognition for re- search excellence from the chancellor and college. His research interest is in the general area of signal processing (analog/digital), and he is working on new approaches in inverter design and solar controller to improve efficiency of solar energy conversion. Another area of interest is engineering education research. He received a bachelor’s degree with honors from the Indian

Conference Session

Aerospace Technical Session

Collection

2012 ASEE Annual Conference & Exposition

Authors

Mehdi Shadaram, University of Texas, San Antonio; Thomas B. Morrow, University of Texas, San Antonio; C. Mauli Agrawal, University of Texas, San Antonio

Tagged Divisions

Aerospace

operations in vectors,complex numbers and matrix algebra. We have included the following topics in the JITM course:Linear and Quadratic Equations; Trigonometry; 2-D Vectors; Complex Numbers; Sinusoids andHarmonic Signals; Systems of Equations and Matrices; Basics of Differentiation; Basics ofIntegration; and Linear Differential Equations with Constant Coefficients. In order to teach thesetopics motivated by their direct engineering application, we have appointed an engineeringfaculty to coordinate and teach the course. In addition, course material are emphasized byphysical experiments in the classroom and laboratory, and are thoroughly integrated with theengineering analysis software Matlab. The topics for laboratory experiments includes

Conference Session

Attracting Young Minds: Part I

Collection

2012 ASEE Annual Conference & Exposition

Authors

Rafic Bachnak, Texas A&M International University; Rohitha Goonatilake, Texas A&M International University

Tagged Divisions

Minorities in Engineering

curriculum beyond classroominstruction and laboratory activities. However, relevant and effective teaching is still critical forthose who aspire to be engineers. Research and teaching functions are often balanced to providea right recipe for optimum benefit to the clientele who target this population. It is believed thatuniversities need to recognize that they are in a competition with the rest of the world and Page 25.1212.2preparation and exposure of adequate innovation to young students are done accordingly [3].Keeping these ideas in mind, activities for this program were designed and implemented.Program SynopsisThis paper outlines a program

Conference Session

ABET Accreditation, Assessment, and Program Improvement in ECE

Collection

2012 ASEE Annual Conference & Exposition

Authors

Larry L Wear, University of Washington, Tacoma; Orlando R. Baiocchi, University of Washington, Tacoma; Matthew Alden, University of Washington, Tacoma; Robert Gutmann, University of Washington, Tacoma; Jie Sheng, University of Washington, Tacoma

Tagged Divisions

Electrical and Computer

AC 2012-3601: GETTING ABET ACCREDITATION RIGHT THE FIRSTTIMEDr. Larry Wear, University of Washington, Tacoma As professor and Associate Director of the Institute of Technology at the University of Washington, Tacoma, Larry Wear teaches in such areas as software process improvement, software engineering, C/C++ programming, assembly language programming, logic and digital design, and introductory engineering courses. Many of these classes are laboratory intensive and some have been taught via distance learning. Wear received his B.S. and M.S. degrees in electrical engineering from the University of Washington, Seattle, and both his M.S. in applied mathematics and Ph.D. in electrical engineering from Santa Clara

Conference Session

New Trends in ECE Education I

Collection

2012 ASEE Annual Conference & Exposition

Authors

Kenneth A. Connor, Rensselaer Polytechnic Institute; Dianna L. Newman, University at Albany/SUNY; Meghan Morris Deyoe, University at Albany/SUNY; Craig J. Scott, Morgan State University; Mohamed F. Chouikha, Howard University; Yacob Astatke, Morgan State University

Tagged Divisions

Electrical and Computer

AC 2012-4523: MOBILE STUDIO PEDAGOGY, PART 1: OVERCOMINGTHE BARRIERS THAT IMPEDE ADOPTIONProf. Kenneth A. Connor, Rensselaer Polytechnic Institute Kenneth Connor is a professor in the Department of Electrical, Computer, and Systems Engineering, where he teaches courses on plasma physics, electromagnetics, electronics and instrumentation, electric power, and general engineering. His research involves plasma physics, electromagnetics, photonics, en- gineering education, diversity in the engineering workforce, and technology enhanced learning. Since joining the Rensselaer faculty in 1974, he has been continuously involved in research programs at such places as Oak Ridge National Laboratory and the Universities of Texas

Conference Session

NSF Grantees' Poster Session

Collection

2012 ASEE Annual Conference & Exposition

Authors

Raymundo Arroyave, Texas A&M University; Miladin Radovic, Texas A&M University; Jefferey E. Froyd, Texas A&M University

Tagged Topics

NSF Grantees Poster Session

to ensure sustained effort throughout the semester. Students can perform experimental work using existing equipment in some of the existing teaching laboratories or in a laboratory that will be established especially for the course as a part of this project. The instructors provide only logistical help in performing experimental and theoretical research.5. During the last week of the semester, groups give oral presentations of their experimental findings. When possible students are encouraged to perform an in-class demonstration of their experiment. Groups are to submit a detailed written report on the experiment as well as the theoretical basis for it and a brief description of linkages between the experiment and the

Conference Session

Energy, the Environment, and Nano Technology

Collection

2012 ASEE Annual Conference & Exposition

Authors

Dhananjay Kumar, North Carolina A&T State University; Devdas M. Pai, North Carolina A&T State University; Kwadwo Mensah-Darkwa; Robin Guill Liles, North Carolina A&T State University; Mainul Kader Faruque, North Carolina A&T State University; Courtney Lambeth, North Carolina A&T State University

Tagged Divisions

Multidisciplinary Engineering

AC 2012-3882: IMPACTING UNDERGRADUATE NANOSCIENCE ANDNANOENGINEERING EDUCATION AT NORTH CAROLINA A&T STATEUNIVERSITYDr. Dhananjay Kumar, North Carolina A&T State University Dhananjay Kumar is an Associate Professor of mechanical engineering at North Carolina A&T State University. His areas of research are thin films and nanomaterials. He teaches classes in materials science, advanced materials, and nanotechnology.Dr. Devdas M. Pai, North Carolina A&T State UniversityMr. Kwadwo Mensah-DarkwaDr. Robin Guill Liles, North Carolina A&T State UniversityMr. Mainul Kader Faruque, North Carolina A&T State UniversityMiss Courtney Lambeth, North Carolina A&T State University Courtney Lambeth, North Carolina

Conference Session

Project-based and Cooperative Learning in ECE

Collection

2012 ASEE Annual Conference & Exposition

Authors

Robert Adams, University of Kentucky; Jens Hannemann, University of Kentucky; Lawrence Holloway, University of Kentucky

Tagged Divisions

Electrical and Computer

AC 2012-5528: CREATIVITY AND DESIGN: A GENERAL EDUCATIONCOURSE FOR ECE FRESHMANDr. Robert Adams, University of Kentucky Robert Adams is an Associate Professor of electrical and computer engineering at the University of Ken- tucky. He teaches several courses within the department and was the 2006 ECE Teacher of the Year. Most recently, he has redesigned the ECE 101 course: Creativity and Design in Electrical & Computer Engineering. Adams’ research interests and activities are in the areas of theoretical and applied electro- magnetics.Dr. Jens Hannemann, University of KentuckyMr. Lawrence Holloway, University of Kentucky Lawrence Holloway, professor and Chair. Department of Electrical and Computer Engineering

Collection

2012 ASEE International Forum

Authors

Nagarjuna Sadineni, Mission10X Wipro Technologies; Rajendra Kumar v Joshi, WIPRO Technologies

board member position in the Indo American Chamber of Commerce (IACC) Education Council and part of the strategic planning committee of International Federation of Engineering Education Societies (IFEES).Dr. Rajendra Kumar Joshi, WIPRO Technologies Dr. Rajendra Joshi is the Head of Research Center, Mission10X. Dr Joshi completed his PhD from Indian Institute of Technology Bombay, after his post graduation in Philosophy from Bangalore University. Joshi taught for 17 years as lecturer, Reader in philosophy and Vice-principal of Chowgule College-Goa. Later he worked as Dean Education at International Academy for Creative Teaching, Bangalore and as founder Director of Indus Training and Research Institute, a training

Collection

2012 ASEE Midwest Section Conference

Authors

Robert I. Egbert; Douglas R. Carroll

&T and MSU faculty members.Those MSU faculty members selected for the program are granted adjunct faculty status atMissouri S&T. Teaching assignments for all faculty in the program are assigned by the ProgramDirector in consultation with the appropriate Department Chairs at Missouri S&T. Initialappointments, salary, tenure, and promotion issues are primarily left to the institution making theappointment, although the other institution is advised of such issues.Students are initially admitted to MSU and then after approximately three semesters apply foradmission to Missouri S&T as a special student in the Cooperative Engineering Program. Theregistrar’s offices of both institutions maintain copies of student records.Tuition and

Conference Session

Design in Freshman and Sophomore Courses

Collection

2012 ASEE Annual Conference & Exposition

Authors

Yosef S. Allam, Embry-Riddle Aeronautical University, Daytona Beach; Clifford A. Whitfield, Ohio State University; Jintana Nina Phanthanousy, Embry-Riddle Aeronautical University

Tagged Divisions

Design in Engineering Education

design process at least 1.2 times per week throughout the term of the project.IntroductionFreshman engineering design coursework, now widely termed “Cornerstone” experiences, beganwide adoption in the 1990’s and into the new millennium through the National ScienceFoundation’s eight Engineering Education Coalitions, among other efforts. These first-year Page 25.1141.2engineering design laboratories serve to complement the already established seniorundergraduate level, or “Capstone” design experiences widely adopted in the 1980’s atengineering colleges across the United States. The combination of the Cornerstone and Capstonecoursework for beginning

Conference Session

Methods, Cases, and Directions

Collection

2012 ASEE Annual Conference & Exposition

Authors

Joseph C. Hartman, University of Florida

Tagged Divisions

Engineering Economy, Engineering Management, Industrial Engineering, Systems Engineering

AC 2012-4293: INCORPORATING AND ASSESSING RISK ANALYSIS INUNDERGRADUATE ENGINEERING ECONOMY COURSESDr. Joseph C. Hartman, University of Florida Joseph C. Hartman is professor and Chair of Industrial and Systems Engineering. He received his B.S. in general engineering from Illinois and M.S. and Ph.D. in industrial and systems engineering from Geor- gia Tech. His teaching and research interests are in economic decision analysis and applied operations research. He is currently Editor of the Engineering Economist and is author of the textbook Engineering Economy and the Decision-Making Process. Page 25.758.1

Conference Session

International Research Experience, Quality Improvement, and Programs/Curriculum Around the Globe

Collection

2012 ASEE Annual Conference & Exposition

Authors

Peter Wolfsteiner, Munich University of Applied Sciences; Brian P. Self, California Polytechnic State University

Tagged Divisions

International

is currently working as exchange professor at California Polytechnic State University, San Luis Obispo.Dr. Brian P. Self, California Polytechnic State University Brian P. Self obtained his B.S. and M.S. degrees in engineering mechanics from Virginia Tech and his Ph.D. in bioengineering from the University of Utah. He worked in the Air Force Research Laboratories before teaching at the U.S. Air Force Academy for seven years. Self has taught in the Mechanical En- gineering Department at Cal Poly, San Luis Obispo, since 2006. During the 2011-2012 academic year, he participated in a professor exchange, teaching at the Munich University of Applied Sciences. His engineering education interests include

Conference Session

Methods, Techniques, and New Programs in Graduate Education

Collection

2012 ASEE Annual Conference & Exposition

Authors

Jennifer H. Gross, Lehigh University; Donna M. Mohr, Lehigh University; Stephen Pessiki, Lehigh University

Tagged Divisions

Graduate Studies

25.360.5hired for the program. The new laboratory course is taught by the existing faculty. All othercourses for the program are pre-existing and the additional enrollment is partially supportedthrough enhanced funding for teaching assistants. Administrative staff resources are shared withthe department. This program capitalizes on existing resources and creates a new program toattract additional students with minimal additional resources.Market AssessmentAs part of the program development process, a market assessment of the structural engineeringindustry and students was conducted to evaluate the validity and viability of the program.An industry assessment was conducted in the spring of 2007. The goals of the assessment wereto obtain feedback from