Collection

2018 Mid Atlantic Section Fall Meeting

Authors

Yasser R Salem, Graduate student; Paul Cotae, University of the District of Columbia

Paper ID #24578Analysis of Distributed Denial of Service Attacks Detection Using Fisher Sta-tistical MethodMr. Yasser R Salem, Graduate studentDr. Paul Cotae, University of the District of Columbia Dr. Paul Cotae, Professor of Electrical and Computer Engineering has more than 25 years of experience in the communication field (research and education). He received a Dipl. Ing. and a M.S. degrees in com- munication and electronic engineering in 1980 from the Technical University of Iassy and a Ph.D. degree in telecommunications from ”Politechnica” University of Bucharest, Romania in 1991, and a Master in Applied Mathematics in

Conference Session

The Challenges of Tech Transfer

Collection

2007 Annual Conference & Exposition

Authors

Bruce Mutter, Bluefield State College; Frank Hart, Bluefield State College

Tagged Divisions

Entrepreneurship & Engineering Innovation

AC 2007-1811: DEVELOPING A CENTER FOR APPLIED RESEARCH ANDTECHNOLOGY TRANSFER (CART, INC.) AT BLUEFIELD STATE COLLEGEBruce Mutter, Bluefield State CollegeFrank Hart, Bluefield State College Page 12.477.1© American Society for Engineering Education, 2007 Developing a Center for Applied Research and Technology Transfer (CART, Inc.) at Bluefield State CollegeAbstractThe paper updates the continuing development of the Center for Applied Research andTechnology (CART, Inc.), at Bluefield State College (BSC), as a vehicle for entrepreneurialsuccess. It discusses our Applied Research Assistant Program (ARAP) to provide teams ofengineering technology students for

Collection

2008 GSW

Authors

Horacio Vasquez; Javier Kypuros; Roy Villanueva

engineering students can be greatly improvedby integrating theory with hands-on activities, implementation, and validation of controllers. Inmechanical engineering, it is a common practice to teach modeling and analysis of dynamicsystem and control systems in a theoretical manner, usually complemented with attractiveexamples and simulations using sophisticated software packages. In most occasions, the controlsystems perfectly accomplish the task they are designed for and they are ready in just a fewiterations, or perhaps, after rigorous theoretical modeling and controller design. However, thereseems to be a need for hands-on activities for students to go through the implementation andvalidation of the designed controllers. The reason why there is a

Conference Session

Using Information Technology to Create New Information Resources

Collection

2009 Annual Conference & Exposition

Authors

Haymwantee Singh, New Jersey Institute of Technology; Richard Sweeney, New Jersey Institute of Technology

Tagged Divisions

Engineering Libraries

AC 2009-1812: ASK NJIT LIBRARY: A NATURAL-LANGUAGE KNOWLEDGEBASE SELF-SERVICE SOLUTIONHaymwantee Singh, New Jersey Institute of Technology Haymwantee P. Singh, Technical Reference Librarian, Robert W. Van Houten Library, New Jersey Institute of Technology, singhh@njit.eduRichard Sweeney, New Jersey Institute of Technology Richard T. Sweeney, University Librarian, Robert W. Van Houten Library, New Jersey Institute of Technology, richard.sweeney@njit.edu Page 14.234.1© American Society for Engineering Education, 2009 ASK NJIT LIBRARY: A Natural Language Knowledge Base Self

Conference Session

BME Laboratory Courses and Experiences

Collection

2009 Annual Conference & Exposition

Authors

Virgilio Gonzalez, University of Texas, El Paso; Eric Freudenthal, University of Texas, El Paso; Homer Nazeran, University of Texas, El Paso

Tagged Divisions

Biomedical

” installation environments such as Gentoo and Linux-from-scratch have been published. These bare-bone systems are pedagogically useful because they expose the full process of system configuration and force students to directly manage low level interfaces.  Linux and a plethora of development tools are freely available without license costs.  Linux is well supported by a wide range of low cost ARM platforms and education boards such as OpenMoko’s open cell phone and Texas Instruments’ Beagle Board.To this end, we chose the “OpenMoko” Linux-based cell phone as our principal target embeddedsystem 3. The OpenMoko project has developed a flexible low-cost cell phone with a completely“open” electrical design and software

Collection

1997 Annual Conference

Authors

T. Chang; R. Barat; J. F. Federici; H. Grebel; A. M. Johnson

level course.OPSE 301 and 402, which include integrated laboratory components, are intended for upperlevelundergraduates. OPSE 601, which emphasizes small group projects in each faculty member'sresearch lab, is designed for advanced undergraduate and new graduate students. Detailed courseand laboratory descriptions may be found at URL:http//www.njit.edu/Directory/Centers/OPSE.I. MotivationA 1994 NSF workshop on "Optical Science and Engineering: New Directions and Opportunitiesin Research and Education" recommended an emphasis in optics research and education because Page 2.119.1"Optical Science and Engineering is an enabling technology--that is, a

Conference Session

Innovative and Computer-Assisted Lab Studies

Collection

2006 Annual Conference & Exposition

Authors

Richard Helgeson, University of Tennessee-Martin

Tagged Divisions

Division Experimentation & Lab-Oriented Studies

2006-984: AN INTERDISCIPLINARY VIBRATIONS/STRUCTURAL DYNAMICSCOURSE FOR CIVIL AND MECHANICAL STUDENTS WITH INTEGRATEDHANDS-ON LABORATORY EXERCISESRichard Helgeson, University of Tennessee-Martin Richard Helgeson is an Associate Professor and Chair of the Engineering Department at the University of Tennessee at Martin. Dr. Helgeson received B.S. degrees in both electrical and civil engineering, an M.S. in electral engineering, and a Ph.D. in structural engineering from the University of Buffalo. He actively involves his undergraduate students in mutli-disciplinary earthquake structural control research projects. He is very interested in engineering educational pedagogy, and has taught a wide

Conference Session

Environmental Engineering Division Technical Session 1

Collection

2017 ASEE Annual Conference & Exposition

Authors

Alexa Rihana-Abdallah, University of Detroit Mercy; James Joseph Lynch, University of Detroit Mercy

Tagged Divisions

Environmental Engineering

nondestructive testing based on wave propagation methods. He is a licensed professional engineer in the State of Michigan. He is the advisor for the student chapter of the American Society of Civil Engineers and the concrete canoe team. c American Society for Engineering Education, 2017Using Matlab-generated Numerical Solutions in an Environmental Engineering Class toPredict the Fate and Transport of ContaminantsAbstract Contaminant transport and fate is an important topic in environmental engineering.Closed-form solutions exist for homogeneous domains; however actual contaminated sites arerarely homogeneous, which means that no-closed form solution exists. An alternative to closed-form solutions is a

Conference Session

Teams, Teaching, Leadership, and Technical Communications in Mechanical Engineering

Collection

2017 ASEE Annual Conference & Exposition

Authors

Megan Reissman, University of Dayton; Timothy Reissman, University of Dayton

Tagged Divisions

Mechanical Engineering

experimentation, mecha- tronics, and dynamic systems and controls. c American Society for Engineering Education, 2017 Scaffold Approach to Teaching Experimentation Megan Reissman and Timothy Reissman Department of Mechanical Engineering, University of DaytonIntroductionIn the real world, engineers are often faced with the task of designing and conducting experimentsto evaluate the performance of products, systems, or processes. Realizing the importance of thisknowledge on how to construct and analyze meaningful experiments, many mechanicalengineering curriculums have incorporated a required undergraduate course dedicated to teaching“engineering experimentation

Conference Session

Engineering Physics and Physics Division Technical Session 2

Collection

2019 ASEE Annual Conference & Exposition

Authors

Michael Daugherity, Abilene Christian University

Tagged Divisions

Engineering Physics and Physics

Engineering and Physics de- partment. Dr. Daugherity’s other research interests include data science and machine learning as well as education and science outreach. c American Society for Engineering Education, 2019 Introducing Programming and Problem Solving with Arduino-based LaboratoriesAbstractFirst year engineering and physics undergraduate students at Abilene Christian University begintheir studies with an intro course designed to teach fundamental skills, explore career options inengineering and physics, and build community. We have developed a series of labs andactivities based on Arduino microcontrollers that helps us accomplish all three of these

Conference Session

Computing and Information Technology Division Technical Session 9

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Mohammad Rafiq Muqri, DeVry University, Pomona

Tagged Divisions

Computing and Information Technology

Paper ID #29236CARLO SIMULATIONSDr. Mohammad Rafiq Muqri, DeVry University, Pomona Dr. Mohammad R. Muqri is a Professor in College of Engineering and Information Sciences at DeVry University. He received his M.S.E.E. degree from University of Tennessee, Knoxville. His research interests include modeling and simulations, algorithmic computing, analog and digital signal processing. c American Society for Engineering Education, 2020ObjectiveThis teaching module was designed to enhance the knowledge and expertise of ourstudents which enabled them to successfully apply Mont Carlo Methods to solve differential

Conference Session

Clinical Learning Experiences in BME

Collection

2018 ASEE Annual Conference & Exposition

Authors

Won Joo, Robert Morris University

Tagged Divisions

Biomedical Engineering

Paper ID #21582Impact of Classroom Surgical Procedure Demonstration Using Artificial Bonein Orthopedic Implant DesignDr. Won Joo, Robert Morris University Won Joo is an Assistant Professor in engineering department at Robert Morris University, Pitt. Pa. He received his Ph.D. in Mechanical Engineering from Case Western Reserve University, and joined RMU in 2013 after 8 years of R&D experience in medical device industry. He has been teaching and researching in mechanics of materials and biological tissue/joint biomechanics. c American Society for Engineering Education, 2018 Impact of Classroom

Conference Session

Instrumentation Division Technical Session 1

Collection

2018 ASEE Annual Conference & Exposition

Authors

Asad Yousuf, Savannah State University; Mohamad A. Mustafa, Savannah State University; Alberto G. De La Cruz; Alfredo Villanueva; Mir M. Hayder, Savannah State University

Tagged Topics

Diversity

Tagged Divisions

Instrumentation

had an enthusiastic response fromstudents interested in both Robotic projects and interest in learning more about Robotics. Roboticsis an interdisciplinary field that incorporates the integration of many systems in software,electronics, control systems, actuators and sensors. The Robotics of today imparts the mostimportant attributes such as the nature of motion, the motions available to rigid bodies and the useof kinematic constraints to organize motion. Because the growing field of Robotics covers manyareas of EET education we decided we would develop curriculum for an introductory course inRobotics. This paper explores the curriculum design and the Lie Algebra and Lie Group that arekeeping track of the variables involved in arm robotic

Conference Session

Engineering Ethics Division Technical Session - Classroom Practices

Collection

2019 ASEE Annual Conference & Exposition

Authors

Amir Hedayati Mehdiabadi, University of New Mexico

Tagged Divisions

Engineering Ethics

research in past years at multiple conferences including American Evaluation Association, International Congress of Qualitative Inquiry, and Academy of Human Resource Development. c American Society for Engineering Education, 2019Comparing Ethical Decision-Making Processes of Students in Computer Science with Non-Computer Science Majors: Lessons for Teaching Ethics to Undergraduate Students Amir Hedayati Mehdiabadi Assistant Professor University of New Mexico AbstractThe aim of this research paper is to understand whether and in what ways undergraduatecomputer

Conference Session

Curricular Issues in Computing and Information Technology Programs I

Collection

2015 ASEE Annual Conference & Exposition

Authors

Mohammad Rafiq Muqri, DeVry University, Pomona; Eric John Wilson; Javad Shakib, DeVry University, Pomona

Tagged Divisions

Computing & Information Technology

Paper ID #12461A Taste of Python - Discrete and Fast Fourier TransformsDr. Mohammad Rafiq Muqri, DeVry University, PomonaMr. Eric John Wilson Electrical and electronics engineering studentDr. Javad Shakib, DeVry University, Pomona Page 26.123.1 c American Society for Engineering Education, 2015 A Taste of Python - Discrete and Fast Fourier Transforms  This paper is an attempt to present the development and application of a practical teaching module introducing Python programming techniques to electronics

Conference Session

ECCD Applications

Collection

2015 ASEE Annual Conference & Exposition

Authors

Esther T. Ososanya, University of the District of Columbia; Sasan Haghani, University of the District of Columbia; Wagdy H Mahmoud, University of the District of Columbia; Samuel Lakeou, University of the District of Columbia; Samuel Daouda Diarra, University of the District of Columbia

Tagged Divisions

Energy Conversion and Conservation

Paper ID #13224Design and Implementation of a Solar-Powered Smart Irrigation SystemDr. Esther T. Ososanya, University of the District of Columbia Dr. Esther T. Ososanya is a professor of Electrical and Computer Engineering at the University of the District of Columbia, and the current BSEE program director. During her career, Dr. Ososanya has worked for private industry as a circuit development engineer and as a software engineer, in addition to her academic activities. She received her education in the United Kingdom, where she achieved her Ph.D. in Electrical Engineering from the University of Bradford in 1985, and a

Conference Session

Systems Engineering Division Technical Session 1

Collection

2015 ASEE Annual Conference & Exposition

Authors

Rama N Reddy; Kamran Iqbal, University of Arkansas, Little Rock

Tagged Divisions

Systems Engineering

/. Page 26.988.1 c American Society for Engineering Education, 2015 Integrating Systems Engineering Concepts in all Design Oriented Courses in the Engineering Curriculum University of Arkansas at Little Rock, 2801 S. University Ave., Little Rock, AR 72204Systems engineering is an interdisciplinary field of engineering that focuses on how to designand manage complex engineering systems over their life cycles. This study makes a case forintroducing core systems engineering concepts in undergraduate courses across engineeringdisciplines. We argue that rapid advances in technology, increasing complexity of engineeringprojects, lack of protection in a globalized world, and the pressures of

Conference Session

Make It!

Collection

2015 ASEE Annual Conference & Exposition

Authors

Rodney Boehm, Texas A&M University - Dwight Look College of Engineering; Magdalini Z Lagoudas, Texas A&M University

Tagged Divisions

Manufacturing

projects sponsored by industry, developing the teaching the Engineering Projects in Community Service course, and developing curricular and co-curricular programs at the Engineering Innovation Center which promote innovation and entrepreneurship among engineering students and in collaborations with other colleges on campus and partnering with other institutions across the country. Page 26.1107.1 c American Society for Engineering Education, 2015 Designing an Intensive Innovation Experience – Aggies InventBackgroundIn 2013, the National Academy of Engineering publication, The

Conference Session

Dynamics

Collection

2015 ASEE Annual Conference & Exposition

Authors

Scott Bevill, Colorado Mesa University; Kelly Bevill, Colorado Mesa University

Tagged Divisions

Mechanical Engineering

. Page 26.1377.1 c American Society for Engineering Education, 2015Smartphone-Based Measurement of Acceleration: Development of aSmartphone Application for Use in an Engineering Dynamics Course Page 26.1377.2AbstractThere is an increasing trend towards use of smartphones as mobile computing devices, and engineeringeducation should stay abreast of this movement. The built-in sensing capabilities of most smartphoneslend themselves especially well to engineering mechanics classes (such as Dynamics) in which kinematicrelationships between position, velocity, acceleration, and time are taught. The purpose of this paper is todescribe the development and

Conference Session

Mechanics of Materials

Collection

2008 Annual Conference & Exposition

Authors

Arnaldo Mazzei, Kettering University; Richard Scott, University of Michigan

Tagged Divisions

Mechanical Engineering

FORCE VERSUS θ, 0 ≤θ ≤π 2References[1] A. Mazzei and R. A. Scott, "Enhancing student understanding of mechanics using simulation software," Proceedings of the 2006 American Society for Engineering Education Annual Conference & Exposition, Chicago - IL, 2006.[2] A. Mazzei and R. A. Scott, "Broadening student knowledge of dynamics by means of simulation software.," Proceedings of the 2007 American Society for Engineering Education Annual Conference & Exposition, Honolulu - HI, 2007.[3] Y. Miyamoto, W. A. Kaysser, B. H. Rabin, A. Kawasaki, and R. G. Ford, Functionally graded materials: design, processing and applications, 1st ed: Springer, 1999.[4] T.-C. Chiu and F. Erdogan, "One-dimensional

Conference Session

Curriculum Implementation of Materials Advances

Collection

2007 Annual Conference & Exposition

Authors

Ajit Kelkar, North Carolina A&T State University; Ronnie Bolick, North Carolina A&T State University; Ram Mohan, North Carolina A&T State University; Oladapo Akinyede, North Carolina A&T State University

Tagged Divisions

Materials

Structures. His research interests include process modeling of manufacturing of composite materials, finite element modeling, high performance coputing, molecular dynamic simulations. He is the member of several professional societies including SAMPE, ASME and ASEE.Oladapo Akinyede, North Carolina A&T State University Page 12.1094.1© American Society for Engineering Education, 2007 NANOENGINEERING OF STRUCTURAL MATERIALSAbstract For the past five years, the research involving the fabrication and processing of reinforcedpolymer nanocomposites has grown exponentially. These new materials are helping in

Conference Session

Projects in ECE

Collection

2014 ASEE Annual Conference & Exposition

Authors

Ying Yu, University of Hartford

Tagged Divisions

Electrical and Computer

Paper ID #10627A Speech Quality and Intelligibility Assessment Project Using Google VoiceDr. Ying Yu, University of Hartford Dr. Ying Yu received her B.Eng. from Fudan University, Shanghai, China, in 2000. She received her M.Eng. and Ph.D. in Electrical Engineering from Brown University, R.I., USA, in 2003 and 2007, respec- tively. Since 2008, she has been teaching at the University of Hartford. Her current research interests are audio and speech signal processing, acoustic scene classification, speaker identification and verification, and teaching with new educational methods, including peer instruction, video games, and

Conference Session

NSF Grantees' Poster Session

Collection

2013 ASEE Annual Conference & Exposition

Authors

Stephanie Farrell, Rowan University; Jennifer Vernengo, Rowan University; Madina Yermagambetova, Al-Farabi KazNU; Peter John Schwalbenberg

Tagged Topics

NSF Grantees Poster Session

Paper ID #7702An Experiment to Introduce pH-responsive Hydrogels for Controlled DrugDelivery: Mechanical TestingDr. Stephanie Farrell, Rowan University Dr. Stephanie Farrell is an Associate Professor of Chemical Engineering at Rowan University (USA). She obtained her PhD in Chemical Engineering from New Jersey Institute of Technology in 1996. Prior to joining the faculty at Rowan in 1998, she was an Assistant Professor of Chemical Engineering and Adjunct Professor of Biomedical Engineering at Louisiana Tech University until 1998. Dr. Farrell has made significant contributions to engineering education through her work in

Conference Session

Emerging Information Technologies

Collection

2010 Annual Conference & Exposition

Authors

Nipul Patel, Purdue University, North Central

Tagged Divisions

Information Systems

AC 2010-1234: WIRELESS NETWORKS IN THE HEALTH CARE INDUSTRY: ADISCONNECTNipul Patel, Purdue University, North Central Page 15.1376.1© American Society for Engineering Education, 2010 WIRELESS NETWORKS IN THE HEALTH CARE INDUSTRY: A DISCONNECTAbstractWireless networking is relatively new and exciting technology for health care. Using handheldperipherals and wireless networking technologies, medical professional can have omnipresentaccess to patient information, clinical functions, and business functions. Wireless networks bringinformation access, data collection capabilities, and clinical applications closer to the point ofcare than is possible using

Collection

2000 Annual Conference

Authors

Robert Schottler; Kamal B. Rojiani

for teaching are discussed and examples of the use of these applets in theclassroom are presented.IntroductionThe development of the World Wide Web (WWW) has led to unprecedented growth in access toinformation over the Internet. In the last five years, educational institutions have realized theimportance of the web as a tool for education. The web offers many advantages including ease ofuse, quick access and low cost. The web-based learning environment is available without thelimitations of time or location. Information on the web can be accessed from any computerplatform since it is hardware and software independent. Another important advantage is globalaccessibility. Web documents are accessible from any computer connected to the Internet

Conference Session

Trends in Mechanical Engineering II

Collection

2011 ASEE Annual Conference & Exposition

Authors

Michael Rex Maixner, U.S. Air Force Academy

Tagged Divisions

Mechanical Engineering

. Page 22.1310.1 c American Society for Engineering Education, 2011 Solar Distillation Project by Michael R. Maixner1. AbstractA solar design project has been developed for use at the United States Air Force Academy(USAFA) in a sustainable energy course; the project entails prediction of solar position, surfaceinsolation intensity, heat transfer modeling of a solar distillation unit, and the possibility for moreopen-ended applications with other locations, environmental conditions, or system modifications.The course was offered for the first time in the spring of 2011, and included many

Conference Session

Teaching Mechanics

Collection

2011 ASEE Annual Conference & Exposition

Authors

Jennifer Kadlowec, Rowan University; Andrew D. Rosenthal, Rowan University; Patrick C. Leung, Rowan University, Undergraduate Student; Alexander Vincent Redfield, Rowan University

Tagged Divisions

Mechanics

AC 2011-462: USING AN ORTHOPAEDIC BIOMECHANICS PROJECTTO REINFORCE SOLID MECHANICS PRINCIPLESJennifer Kadlowec, Rowan UniversityAndrew D. Rosenthal, Rowan UniversityPatrick C. Leung, Rowan University, Undergraduate StudentAlexander Vincent Redfield, Rowan University Page 22.1608.1 c American Society for Engineering Education, 2011 An orthopaedic biomechanics project to reinforce mechanics principlesAbstractA team of junior and senior students investigated the mechanics of an interlocked IM rod andtibial Sawbone construct associated with increasing cortical comminution as part of research

Conference Session

Course and Curriculum Development

Collection

2012 ASEE Annual Conference & Exposition

Authors

Yuan Liao, University of Kentucky; Lawrence Holloway, University of Kentucky; Paul A. Dolloff, University of Kentucky

Tagged Divisions

Multidisciplinary Engineering

. Page 25.454.1 c American Society for Engineering Education, 2012 Development of a New Multidisciplinary Course: Smart Grid1. IntroductionThe future power grid will be a comprehensive cyber-physical (hybrid) system, where the powergrid should be able to deliver high quality, clean, reliable, efficient, and affordable electricity toconsumers 1, 2. Importantly, consumers will have more freedom in monitoring and managingtheir usage of power. More smart appliances and electric vehicles will emerge that interact withthe grid. There will be a greater diversity of generation including thermal, wind, solar, hydraulic,biomass, etc. and all will be more easily integrated into the grid. Though power transfer

Conference Session

Mechanics Concepts II

Collection

2012 ASEE Annual Conference & Exposition

Authors

Olufunmilola Atilola, Texas A&M University; Francisco Vides, Texas A&M University; Erin M. McTigue, Texas A&M University; Julie S. Linsey, Texas A&M University; Tracy Anne Hammond Ph.D., Texas A&M University

Tagged Divisions

Mechanics

AC 2012-4935: AUTOMATIC IDENTIFICATION OF STUDENT MISCON-CEPTIONS AND ERRORS FOR TRUSS ANALYSISMs. Olufunmilola Atilola, Texas A&M UniversityFrancisco Vides, Texas A&M University Francisco Vides is a Graduate Researcher at the Sketch Recognition Lab at Texas A&M University. He received a double major from Los Andes University in Bogota, Colombia, in electrical engineering and computer science. He is now finishing his master’s degree in computer science at Texas A&M University. His research interests are in computer-human interaction (CHI), artificial intelligence (AI), computer- assisted instructional (CAI) software, and intelligent tutoring systems (ITS).Prof. Erin M. McTigue, Texas A&M UniversityDr

Collection

1998 Annual Conference

Authors

Michael Rudko

designed to encompass areas, and develop analytical and applied skills which can be expected to form the basis of electrical engineering in the future. (2) To give the students a more in-depth mastery of at least one area of electrical engineering. (3) To instill in the students the ability to apply this knowledge in the analysis, design and testing of engineering systems, processes and components. This includes the ability to use the computer and appropriate software tools, a facility with laboratory techniques, and with the analysis and interpretation of data. (4) To expose the students to engineering practice and to its ethical and societal aspects, and to make them proficient in