Collection

1996 Annual Conference

Authors

Emil C. Neu

Notebooks, PC World, July 1995, pp. 190-202. 7. nView Corp., nSight Monochrome LCD Data Projector, Newport News, VA: nView Corp., 1993. EMIL C. NEUEmil C. Neu is Professor of Electrical Engineering and Computer Science at Stevens Institute of Technology. Inaddition to teaching, Dr. Neu has done research on reliability, computer-aided testing, and partial period FourierSeries. He currently is working on the integration of computers and modern teaching methods into theEngineering Curriculum. He also is Secretary of the Faculty and Coordinator of Graduate Advising. Page 1.116.4

Collection

1996 Annual Conference

Authors

Jr., Alfred J. Bedard; David G. Meyer

. Page 1.232.9 ---- .— - . . . .— Biographical InformationALFRED J. BEDARD, JR.Dr. Bedard is an expert in the design of instrumentation and techniques for the detection and study of acousticgravity waves in the atmosphere. He has been a supervisory physicist with the Environmental TechnologyLaboratory of NOAA since 1966, and he has been an adjunct associate professor of Aerospace EngineeringSciences in the College of Engineering and Applied Science at the University of Colorado since 1988.DAVID G. MEYERDr. Meyer’s research activities center around the modeling and control of advanced dynamic systems. He wason the faculty of the University of Virginia for four years where he was the recipient of the Young

Collection

1996 Annual Conference

Authors

Ph.D., Robert D. Borchelt

neatly under the headings that they use. To further complicate the issue, it should be noted that lecturing on the subject of manufacturingsystems integration is not sufficient. To truly understand the difficulties and uncertainties that can arise in asystems integration effort, students really need to be involved in a project that exposes them to theunpredictable and unforeseeable nature of the task.A Solution In the Industrial and Manufacturing Engineering Department of the University of Wisconsin-Milwaukee, a course has been developed to address these needs. The course is entitled (not surprisingly)ManufacturingSystems Integration and is a senior-level undergraduate/first-year graduate level course. It is an elective courseand

Collection

1996 Annual Conference

Authors

William Davis; Joseph A. Heim

.Authors Biographical InformationWilliam Davis is a graduate student in Industrial Engineering at the University of Washington. His primaryresearch focuses on the economic analysis of advanced manufacturing technologies and computer integratedmanufacturing systems. His interests include discrete event simulation, manufacturing system modeling,manufacturing automation and enterprise computing technology.Dr. Joseph Heim is an assistant professor of Industrial Engineering at the University of Washington in Seattle,Washington. His primary teaching responsibilities include computer integrated manufacturing systems,simulation, inventory management and scheduling. His research interests include modeling complex collaborativetasks, as well as the design

Collection

1997 Annual Conference

Authors

Seung H. Kim

. 131-141, Adison-Wesley,Reading, MA, (1985).SEUNG H. KIMDr. Seung H. Kim is currently an Assistant Professor in the Manufacturing Technology Department at IndianaUniversity-Purdue University at Fort Wayne. He graduated from Hanyang University in 1979 with a B.S. inCeramics Engineering. He received his M.S. and Ph.D. in Metallurgy at the University of Illinois at Chicago in 1993.He had worked in semiconductor manufacturing company for several years. His research has focused on materialssynthesis and process by plasma technology. Page 2.5.4 Figure 1. Mathcad worksheet for solving example in Fick's first law

Conference Session

Engineering Physics and Physics Division Technical Session 2

Collection

2019 ASEE Annual Conference & Exposition

Authors

Kanti Prasad, University of Massachusetts, Lowell

Tagged Divisions

Engineering Physics and Physics

Best Campus award for the Zone 1 from ASEE dur- ing 2012. He is also coordinator for Graduate Studies in VLSI and Semiconductors certificate program. Professor Prasad already offered Online 16.517 MMIC Design and Fabrication during Spring 2009 and also developing MEMS Design and Fabrication to be offered Online starting from Spring 2013. He is the author of over 150 theses, dissertations and papers published and presented in journals/conferences of national and international repute. In 2013 Professor Prasad was awarded Fellow from the ASEE. c American Society for Engineering Education, 2019 Integration of Physics Fundamentals to Prepare Students for the Hi-Tech World through Design

Conference Session

Multidisciplinary Effects on Student Learning

Collection

2016 ASEE Annual Conference & Exposition

Authors

Doanh Van, Union University

Tagged Topics

Diversity

Tagged Divisions

Multidisciplinary Engineering

Francisco, CA: Jossey-Bass, Inc.5. Measuring Student Learninghttp://cte.cornell.edu/teaching-ideas/assessing-student-learning/measuring-student-learning.html#26. Design project rubric http://www.engr.wisc.edu/cmsdocuments/DesignProjectRubric.pdf viewed on March 18,20167. Presentation rubric http://www.engr.wisc.edu/cmsdocuments/PresentationRubric.pdfviewed on March 18, 20168. Research paper/project http://www.engr.wisc.edu/cmsdocuments/ResearchPaperProjectRubric.pdf Viewed onMarch 18, 20169. Rogers, G., Developing Rubrics, 2010 ABET Webinar on CD, Baltimore, MD10. Self-Study Displays. 2014 ABET Symposium, Pittsburgh, PA

Conference Session

Retention Programs for Women Students

Collection

2007 Annual Conference & Exposition

Authors

Kimberly Douglas, Kansas State University

Tagged Divisions

Women in Engineering

. The projectmanagers are responsible for forming groups, handling one on one communication withparticipants, hosting events, and providing follow-up to determine if groups arefunctioning effectively.Each mentoring group also has access to $20 per person to fund small group activitieseach semester. Groups will use this for activities such as going to the movies, going outto dinner, taking a study break to get ice cream, bowling, or meeting for coffee. Whilethis funding may seem insignificant, it provides the means for students to do thingstogether as a group.Program ActivitiesWomen Mentoring Women hosts monthly large group events. Historically, events wereprimarily opportunities for social interaction. Over the past two years, the

Conference Session

ASEE Multimedia Session

Collection

2003 Annual Conference

Authors

Sandra Cruz-Pol

Cruz-PolSandra Cruz-Pol is Associate Professor of the Electrical Engineering Department at UPRM. She obtainedher Ph.D. in Electrical Engineering from the Pennsylvania State University. Her research interests are inthe area of microwave remote sensing, specifically in the Microwave Atmospheric Absorption near the 22GHz water vapor resonance line, and studies of the microwave sea surface brightness temperature seenfrom space over calm ocean. Dr. Cruz-Pol is currently working in various projects sponsored by NSF,NASA, IBM and IAP within the microwave remote sensing area including an Engineering ResearchCenter (ERC) for Subsurface Sensing and Image Systems in collaboration with Northeastern University

Conference Session

Curriculum Development in Computer ET

Collection

2003 Annual Conference

Authors

Sivakum Venkatanarayanan; John Robertson, Arizona State University; Lakshmi Munukutla, Arizona State University

Threshold adjust Source contact Figure 1Subsequent thermal processing steps shift the as-implanted profile but the effects can bevery adequately simulated 2,3. If small random variations in process conditions areintegrated into the simulation program, sensitivity to the major control parameters, driftand even failure effects can be explored. This is an important attribute of the simulatorthat is very expensive to demonstrate with a real tool. It also provides an educationalplatform to study management of variation - one of the key determinants of businesscompetitiveness. There is a natural link to statistical process control and Design ofExperiments (DOE).3. Implant tool simulationFigure 2 shows

Conference Session

Innovation in ChE Teaching

Collection

2005 Annual Conference

Authors

Jason Keith

instructor to give as "prizes" something that he did not want to keep • The students get a chance to laugh and have some fun while learning • It allows the instructor a chance to review a concept from the last class • It recaptures the student's attention after the question and review are overAn unintended consequence of this competition is increased student pride in theperformance of their team and encouragement of their "team members" to come to class.IntroductionFelder and Silverman1 have studied the subject of learning and teaching styles, andclassify a learner by the following categories: Page 10.1324.1 1. What type of information

Conference Session

Embedded Computing

Collection

2005 Annual Conference

Authors

Daniel Pack; Barry Mullins

Page 10.421.1 Proceedings of the 2005 American Society for Engineering Education Annual Conference & Exposition Copyright © 2005, American Society for Engineering Educationcomponents of the completed project. The student chose this project because it waschallenging and stimulated his interests. He was given three weeks to complete the finalproject.The experience was invaluable in motivating the student to become a better digitalelectrical engineer for three reasons: (1) the project stimulated his personal interests; (2)the project enriched his abilities to gain new knowledge as he researched therequirements and capabilities of the AND1371, an NES controller and the game of Tetris;and (3) programming video game graphics

Conference Session

Emerging Trends in Engineering Education

Collection

2004 Annual Conference

Authors

Ryan Kowalski; Paul Santi

geology to interpreting subsurfaceconditions for nine years, and he conducted site investigations in the engineering consulting industry for six years.His investigation simulation program, BEST SiteSim, was a finalist for the 2002 Premier Award.RYAN J. KOWALSKI is a graduate student in Geology and Geological Engineering at the Colorado School ofMines. He has a bachelor’s degree in Geological Engineering from the same program. In addition to his researchwork on BEST SiteSim and evaluating its effectiveness, he is also researching the influence of geology andgeomorphology on the Lewis and Clark Expedition. Page 9.1368.6

Conference Session

Electrical & Computer Engineering Poster Session

Collection

2004 Annual Conference

Authors

Derek Maxwell; Kathleen Kramer

design more relevant to these applications resulted in thedevelopment of student digital design projects based both upon their relevance tocommunications topics and their suitability as undergraduate design projects within a digitaldesign course. The projects selected included a direct digital synthesizer (DDS) and aspects of adigital delay-locked loop (DLL). Both projects offer an opportunity for a variety of approachesand the use of realistic constraints.IntroductionThe study of wireless and other advanced communications systems topics at the undergraduatelevel has developed at some universities, largely in response to the increased interest resultingfrom the impressive research and development in such technology over the past several

Conference Session

TIME 9: Thermal Fluids/Fluid Mechanics

Collection

2004 Annual Conference

Authors

David Pines

take more advanced fluid mechaniccourses or go to graduate school.IntroductionAt the University of Hartford, the civil, biomedical, and acoustical engineering students take a 4-credit Thermal Fluid Engineering course in their junior year. The fluid mechanics part of thecourse covers topics such as fluid properties, fluid statics, continuity equation, momentumbalance, energy balance, pipe flow, and flow over bodies. Demonstrations supplement thelectures by providing students an opportunity to see first- hand various aspects of fluid flow.However, most undergraduate students are not aware of the power of computational fluiddynamics (CFD) for visualizing, analyzing, and designing fluid/thermal systems. It is theseelements, especially

Conference Session

Real-World Applications

Collection

2004 Annual Conference

Authors

John Robertson

given rapidtechnology development and global business competition, the need for skill enhancementis unremitting at all levels. To further define and realize our broad educational objective,there are a number of important supporting factors: ‚" The Microelectronics Teaching Factory (MTF) is a 15,000 sq ft clean room that is run as a managed facility for teaching and research. ‚" The Industry Advisory Board is composed of operations managers from all the local companies. They view the ASU program as an investment in their own intellectual capital. ‚" Through two NSF grants, there are collaborations with local community colleges, schools and the Arizona Science Museum to use the MTF. ‚" The companies have generously

Conference Session

Integrating Math in Mechanical Engineering Curriculum

Collection

2003 Annual Conference

Authors

Surendra Gupta

, and case studies) they could help educatethe statistics instructors about engineering applications; provide high-quality resources tostatistics instructors for easy integration into their statistics courses for engineers; begin acollaboration among statistics and engineering faculty that teach the same sets of students; andprovide engineering students the motivation to learn statistics well, and be able to apply theirstatistical skills to engineering data in a meaningful and productive way.The engineering modules proposed are based on concepts and laboratory experiments from twocourses: Materials Processing (a 1st year course) and Materials Science (a 2nd year course). Bothare mandatory courses for mechanical as well as industrial engineering

Conference Session

Curriculum Development in EM ET

Collection

2003 Annual Conference

Authors

Sreenivas Sathyanarayana; Saravanan Rajendran; Robert Bolton

study a Sugeno-Takagi (TSK) model was used for the rulebase to estimate the output voltage. The output voltage is adjusted based on the error andchange in error.Initially a simple model was developed with just the error as a feedback parameter. Atotal of 5 rules were obtained based on the magnitude of error. Table 1 shows the rulebase Error LN SN Z SP LP Output LP SP Z SN LN Table 1. Rule base for the Fuzzy ControllerLater this system was developed with a fuzzy controller design based on direction andmagnitude of error and change in error. A total of 15 rules were obtained based on theabove parameters. The following three conditions arise based on error and

Conference Session

Teaching Design

Collection

2003 Annual Conference

Authors

Georg Mauer

American Society for Engineering Education Annual Conference &Exposition Montreal 2002.http://www.asee.org/conferences/caps/document2/2002-1905_Paper.pdf[10] D.C. Davis, K.L. Gentili, M. S. Trevisan, D. E. Calkins “Engineering Design AssessmentProcesses and Scoring Scales for Program Improvement and Accountability,” Journal ofEngineering Education 211- 221, April 2002.[11] Robolab 2.5 The Lego Group, Inc.http://www.lego.com/dacta/products/productsbyproductline.asp, 2002GEORG MAUERGeorg F. Mauer is a Professor of Mechanical Engineering at The University of Nevada, LasVegas. Dr. Mauer is active in instructional computing, as well as in research on AutomaticControl, Robot Sensors and Control. He graduated as a Diplom-Ingenieur from the

Collection

2001 Annual Conference

Authors

Paul Marquard; Bruce R. Dewey; Sally Steadman; Raymond Jacquot

the students have not yet studied the material on dccircuits, they are instructed how to hook up the meters. Approximately ten values of current andvoltage are recorded and analyzed with Excel. As shown in Fig. 1, linear regression is best forthe battery and polynomial regression is best for the bulb. Battery Test Bulb Test 3.15 800 3 2

Collection

2000 Annual Conference

Authors

Edward H. McMahon

at Chattanooga. He has over 19 years ofindustrial experience and is registered in Tennessee. His teaching and research interests are in design, valueanalysis, and product development. Dr. McMahon graduated from Rutgers University in 1965 with a BS inChemical Engineering, ME degree, and doctorate in Chemical Engineering from New York University in 1974. Page 5.481.7

Collection

2001 Annual Conference

Authors

Tina Varma; Virendra Varma

Technology at Missouri Western State College. He has served as a mentor to several faculty oncampus including faculty in his own department. He has over 25 years of industrial experience in highly responsiblepositions ranging from a project manager to a partner in an engineering company.TINA VARMATina Varma holds a B.S. degree in Biology with a minor in Chemistry, and a B.S.E. degree with a Scienceconcentration from Missouri Western State College. She is currently pursuing graduate studies at NorthwestMissouri State University. Page 6.563.5 "Proceedings of the 2001 American Society for Engineering Education Annual Conference &

Conference Session

New Approaches in Engineering

Collection

2013 ASEE Annual Conference & Exposition

Authors

Singli Garcia-Otero, Virginia State University; Nasser Ghariban, Virginia State University; Fedra Adnani

Tagged Divisions

Minorities in Engineering

other engineering programs in the U.S., we require incoming freshmen to declaretheir intended major. All the engineering students are required to take two semesters ofIntroduction to Engineering (ENGR 101 and ENGR 102). This paper discusses some of themethods we used in first semester of Introduction to Engineering to increase the retention rate,and provides the statistical results for the past two years.IntroductionThe demand for more diversified and qualified graduates in science, technology, engineering andmathematics (STEM) has increased dramatically in recent years, as many baby boomersapproach the retirement age [1]. In response to the demand, the number of freshman engineeringstudents has grown considerably over the last decade and this

Conference Session

Design Cognition II

Collection

2012 ASEE Annual Conference & Exposition

Authors

Cyrus Habibi P.E., Minnesota State University, Mankato; Ronald R. Ulseth, Itasca Community College

Tagged Divisions

Design in Engineering Education

well as teachesstudents professional skills and technical content 5,14. These professional skills include:communication (written, verbal, presentation), organization and time management, research andinquiry, self-assessment and reflection, group participation and leadership skills 14,15.With guidance from some of the most respected leaders in engineering education, a new model,Iron Range Engineering (IRE), has been developed to utilize industry-based PBL for design,outcome-based assessment, just-in-time interventions, self-directed learning, and emphasis onreflection 16. This new model for engineering education has been funded and began delivery inJanuary 2010. This model is a complete PBL program in which students work with industry ondesign

Collection

2001 Annual Conference

Authors

John Carpinelli

Session 1420 The Relatively Simple CPU Simulator John D. Carpinelli New Jersey Institute of TechnologyAbstractThe Relatively Simple CPU Simulator is an instructional aid for students studying computerarchitecture and CPU design, typically at the junior or senior level. It simulates the RelativelySimple CPU, a 16-instruction processor introduced in the textbook Computer SystemsOrganization and Architecture1. Students first enter an assembly language program, which isassembled by the simulator. After correcting any syntax errors, the user simulates the

Collection

2001 Annual Conference

Authors

David S. Cottrell

Session 2650 Building Bridges: Computer-Aided Design as a Vehicle for Outreach to High School Students in the New Millennium David S. Cottrell Pennsylvania State University at HarrisburgI. IntroductionThis paper describes the use of a computer-aided design (CAD) software package as avehicle for outreach to high school students. Particularly, this research effort affordedpupils at a secondary school in central Pennsylvania the opportunity to participate in aprogram that was designed to accomplish the following: • To stimulate interest in engineering and design

Collection

1998 Annual Conference

Authors

Jack Zecher; Kenneth Rennels; Douglas Acheson

Session 3538 DEVELOPMENT OF A RECRUITMENT CD-ROM Douglas Acheson, Kenneth Rennels, Jack Zecher Purdue School of Engineering and Technology Indiana University-Purdue University Indianapolis (IUPUI)Student recruitment is an essential activity critical to the long-term success and viability of anydegree program. The continuous effort that is necessary to attract the best and brightestindividuals to study engineering technology must be a high priority to all universities and faculty.It is important that the latest technological tools be used in this recruiting effort. The Departmentof

Collection

1998 Annual Conference

Authors

Ronald H. Rockland

area.IntroductionCommunication skills are essential in the development of an engineering technologist. This has beenreinforced in discussion with several industrial advisors at both NJIT and local community colleges,where the requirements for technology position includes not only technical skills but also a variety ofnon-technical skills. These include interpersonal skills, ability to work as a team, and good oral andwritten communication skills.Part of the ability to communicate is to be proficient in computer applications such as word processing,spreadsheet analysis and presentation skills. In previous laboratory based courses, it was observed by theauthor that these skills were not strong in many students. To study whether that hypothesis was correct,as well as

Collection

1998 Annual Conference

Authors

Robert M. Koretsky

Session 1253 An Integrative Approach to Computer Graphics for Freshman Robert M. Koretsky University of Portland School of EngineeringABSTRACT: The paper describes a multi-disciplinary computer graphics course with a finalproject whose basic intentions are 1) to provide motivation through creativity and cooperation forthe study of engineering and 2) to develop the graphical communication and visualization skillsof the student via the use of pencil-and-paper sketching supported by appropriate computersoftware. A majority of the course content was designed around a report

Collection

1997 Annual Conference

Authors

Marilyn Barger, Hillsborough Community College

business vision will evolve to incorporate the ISO 14000 philosophies. Thebusiness environment that all engineering students will move into upon graduation will beinfiltrated with ISO environmental quality management ideals. To prepare students better for thisevolving work environment, it is important that educators become familiar with the ISOstandards and incorporate their underlying quality philosophy into the curriculum. There areseveral places where this could easily be done in environmental engineering curricula. Two such Page 2.266.5suggestions will be presented.Many introductory environmental engineering courses include a unit on