AC 2008-614: POWER ENGINEERING TECHNOLOGY PROGRAMDEVELOPMENTRay Miller, University of Cincinnati Ray Miller graduated from Case Institute of Technology with a BS in Fluid and Thermal Sciences in 1977. Over his 30 career in the energy field Ray build large commercial power plants for several utilities. He has also become an AEE Certified Energy Manager, and an AWS CWI. He has taught as an adjunct at the College of Applied Science for 20 years and has served on the industrial advisory boards of the Mechanical Engineering Technology and Electrical and Computer Engineering Technology departments. Ray is a member of the AWS, AFE and AEE.Max Rabiee, University of Cincinnati Max Rabiee earned
AC 2009-129: INTEGRATING ALTERNATIVE-ENERGY TECHNOLOGY INTOENGINEERING EDUCATIONLinfeng Zhang, University of Bridgeport Linfeng Zhang is an assistant professor of Electrical Engineering at University of Bridgeport. His research interests are in sensors and actuators, fuel cells, and phtovoltaic cells.Xingguo Xiong, University of Bridgeport Xingguo Xiong is an assistant professor of Electrical Engineering at University of Bridgeport. His research interests are in MEMS, nanotechnology, VLSI.Junling Hu, University of Bridgeport Junling Hu is an assistant professor of Mechanical Engineering at University of Bridgeport. Her research interests are in computational fluid dynamics
AC 2010-1293: ENERGY HARVESTING INVESTIGATIONS BYUNDERGRADUATE ENGINEERING TECHNOLOGY STUDENTSDale Litwhiler, Pennsylvania State University, Berks Dale H. Litwhiler is an Associate Professor at Penn State, Berks Campus in Reading, PA. He received his B.S. from Penn State University (1984), his M.S. from Syracuse University (1989) and his Ph.D. from Lehigh University (2000) all in electrical engineering. Prior to beginning his academic career in 2002, he worked with IBM Federal Systems and Lockheed Martin Commercial Space Systems as a hardware and software design engineer.Thomas Gavigan, Penn State Berks Thomas H. Gavigan is an Assistant Professor at Penn State, Berks Campus in Reading, PA. He
AC 2011-988: RENEWABLE ENERGY REVIVES ELECTRONICS & COM-PUTER ENGINEERING TECHNOLOGYJoyce M.E. van de Vegte, M.A.Sc., Electronics & Computer Engineering Technology, Camosun College, Victo-ria, CanadaAlan P. Duncan, Electronics & Computer Engineering Technology, Camosun College, Victoria, Canada Page 22.1239.1 c American Society for Engineering Education, 2011 Renewable energy revives electronics & computer engineering technologyBackgroundConcerns about greenhouse gases and dwindling fuel supplies have given rise to aggressiveenergy efficiency
AC 2010-772: ENGINEERING AND TECHNOLOGY EDUCATION FORELECTRIC VEHICLE DEVELOPMENTDavid McDonald, Lake Superior State University David McDonald is a Professor of Electrical Engineering at Lake Superior State University and the ASEE Campus Representative. He also does consulting in the area of test cell development for electric vehicle engineering. Page 15.476.1© American Society for Engineering Education, 2010 Engineering and Technology Education for Electric Vehicle DevelopmentAbstractDuring 2011 electric vehicles will be mass produced for the first time in history
Paper ID #25178Integrating Geothermal Energy Education to an Engineering Technology Cur-riculumDr. Reg Pecen, Sam Houston State University Dr. Reg Pecen is currently a Quanta Endowed Professor of the Department of Engineering Technology at Sam Houston State University in Huntsville, Texas. Dr. Pecen was formerly a professor and program chairs of Electrical Engineering Technology and Graduate (MS and Doctoral) Programs in the Depart- ment of Technology at the University of Northern Iowa (UNI). Dr. Pecen served as 2nd President and Professor at North American University in Houston, TX from July 2012 through December 2016. He
Paper ID #25197A Smart Grid Implementation for an Engineering Technology CurriculumDr. Reg Pecen, Sam Houston State University Dr. Reg Pecen is currently a Quanta Endowed Professor of the Department of Engineering Technology at Sam Houston State University in Huntsville, Texas. Dr. Pecen was formerly a professor and program chairs of Electrical Engineering Technology and Graduate (MS and Doctoral) Programs in the Depart- ment of Technology at the University of Northern Iowa (UNI). Dr. Pecen served as 2nd President and Professor at North American University in Houston, TX from July 2012 through December 2016. He also
AC 2012-3693: EMBEDDING RENEWABLE ENERGY AND SUSTAINABIL-ITY INTO THE ENGINEERING TECHNOLOGY CURRICULADr. Radian G. Belu, Drexel University Radian Belu is Assistant Professor within the Engineering Technology (ET) program, Drexel University, Philadelphia, USA. He is holding the second position as Research Assistant Professor at Desert Research Institute, Renewable Energy Center, Reno, Nev. Before joining to Drexel University, Belu held faculty and research positions at universities and research institutes in Romania, Canada, and the United States. He also worked for several years in industry as a project manager and senior consultant. He has taught and developed undergraduate and graduate courses in electronics
AC 2011-1245: A BALANCED VIEW OF NEW TECHNOLOGIESJohn M Robertson, Arizona State University, Polytechnic campus John Robertson, PhD, is a Professor in the Engineering Technology Department at Arizona State Univer- sity Polytechnic where he specializes in semiconductor technology. His research interests include process control and its application to educational development. He was formerly an executive with Motorola and now participates in many senior technical training programs with the JACMET consortium.Slobodan Petrovic, Oregon Institute of Technology Slobodan Petrovic is an Associate Professor at Oregon Institute of Technology iin Portland, OR. Prior to that he was as Associate Professor at Arizona State
ILYA Y. GRINBERGIlya Grinberg graduated from the L’viv Polytechnic Institute (L’viv, Ukraine) with an MS in EE and earned a Ph.D.degree from the Moscow Institute of Civil Engineering (Moscow, Russia). He has over 30 years of experience indesign and consulting in the field of power distribution systems and design automation. Currently he is Professor ofEngineering Technology at Buffalo State College. He is a Senior Member of IEEE, and a member of ASEE.HERBERT L. HESSHerb Hess received the PhD degree from the University of Wisconsin-Madison in 1993. He served on the faculty ofthe United States Military Academy from 1983-1988. In 1993, he joined the University of Idaho, where he isAssociate Professor of Electrical Engineering. He received the
Paper ID #9028DEVELOPING A RENEWABLE ENERGY TECHNOLOGY COURSE FORA MASTER OF TECHNOLOGY (MTECH) PROGRAMDr. Omonowo David Momoh, Indiana University Purdue University, Fort Wayne Omonowo (David) Momoh is an Assistant Professor in the Department of Computer, Electrical and Infor- mation Technology at Indiana University-Purdue University, Fort Wayne, Indiana. He received his PhD in Electrical Engineering from Prairie View A&M University, Prairie View, Texas. He received the MSc and BSc in Electronics and Electrical Engineering from Obafemi Awolowo University, Ile-Ife, Nigeria. He worked for SIEMENS Nigeria Limited as an
AC 2010-1255: A GRADUATE CERTIFICATE IN EFFICIENT ENERGYTECHNOLOGYJai Agrawal, Purdue University, Calumet JAI AGRAWAL is a Professor in Electrical and Computer Engineering Technology. He received his Ph.D. in Electrical Engineering from University of Illinois, Chicago, in 1991, M.S. and B.S. also in Electrical Engineering from I.I.T. Kanpur, India in 1970 and 1968 respectively. Professor Agrawal has worked for two years in optical networking industry in the Silicon Valley in California. His expertise includes energy systems, nanophotonics, optical networking at physical and data link layers, optical and WDM interface, SONET and Gigabit Ethernet and analog electronic systems. He is the
AC 2010-677: A GREEN TECHNOLOGY COURSE IN A COMMUNITY COLLEGEPaul Chanley, Northern Essex Community CollegeMichael Pelletier, Northern Essex Community CollegeLinda Desjardins, Northern Essex Community CollegeLori Heymans, Northern Essex Community College Page 15.36.1© American Society for Engineering Education, 2010 A Green Technology Course in a Community CollegeAbstractThis paper describes a Green Technology course taught for the first time in 2009 and two briefsummer bridge programs offered at a community college in 2008 and 2009.The summer bridge programs were organized around the theme of the generation of electricityfrom renewable sources and provided an
AC 2011-2661: TESTBEDS CONNECTING SPACE TECHNOLOGY TOTERRESTRIAL RENEWABLE ENERGYNarayanan M. Komerath, Georgia Institute of Technology Professor, Daniel Guggenheim School of Aerospace Engineering Page 22.1423.1 c American Society for Engineering Education, 2011Testbeds Connecting Space Technology To Terrestrial Renewable Energy AbstractTechnologies to exploit resources beyond Earth bear great relevance to the problem ofdeveloping cost-effective solutions for terrestrial micro renewable energy systems. This papersummarizes the approach taken in a course-curriculum-laboratory initiative to
Paper ID #10192Green Technology for Disaster Relief and Remote AreasDr. Salahuddin Qazi, State University of New York, Institute of Tech. Salahuddin (Sala) Qazi holds a Ph.D., degree in electrical engineering from the University of Technology, Loughborough, U.K. He is a full Professor (Emeritus) and past chair in the School of Information Systems and Engineering Technology at the State University of New York Institute of Technology, Utica. Dr. Qazi has published several articles in the area of fiber doped amplifiers, wireless security, MEMS and photo- voltaic energy. He has co-authored two books in the area of
AC 2012-3249: INDOOR SECURITY LIGHTING WITH SOLAR POW-ERED LED TECHNOLOGYDr. Faruk Yildiz, Sam Houston State UniversityMr. Keith L. Coogler, Sam Houston State University Keith L. Coogler is an instructor of industrial technology at Sam Houston State University. He received a B.S. in design and development and holds a M.A. in industrial education and is pursuing an Ed.D. in higher education from Texas A&M University, Commerce. His primary teaching area is construction management. Research interests include automation, electronics, alternative energy, and ”green” con- struction. Page 25.771.1
conference proceedings in his ar- eas of the research interests. He has also been PI or Co-PI for various research projects United States and abroad in power systems analysis and protection, load and energy demand forecasting, renewable energy, microgrids, wave and turbulence, radar and remote sensing, instrumentation, atmosphere physics, electromagnetic compatibility, and engineering education.Dr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational
Paper ID #12293Training Engineers and Technologists via Model TrainsDr. Glenn T. Wrate P.E., Northern Michigan University Glenn T. Wrate received his B.S.E.E. and M.S.E.E. from Michigan Technological University (MTU) in 1984 and 1986, respectively. While attending MTU, he worked for Bechtel Power Corporation on the Belle River and Midland power generating stations. After graduating MTU, he worked for the Los Ange- les Department of Water and Power from 1986 to 1992, primarily in the Special Studies and High Voltage DC (HVDC) Stations Group. He returned to MTU in 1992 to pursue a Ph.D. in Electrical Engineering. While
AC 2009-2403: MSETI-AREA: MATH-SCIENCE-ENGINEERING TECHNOLOGYIN IOWA ON APPLIED RENEWABLE ENERGY AREASRecayi "Reg" Pecen, University of Northern Iowa Recayi “Reg” Pecen, Ph.D. Dr. Pecen holds a B.S.E.E. and an M.S. in Controls and Computer Engineering from the Istanbul Technical University, an M.S.E.E. from the University of Colorado at Boulder, and a Ph.D. in Electrical Engineering from the University of Wyoming (UW, 1997). He has served as graduate assistant and faculty at the UW, and South Dakota State University. He is currently an associate professor and program coordinator of Electrical and Information Engineering Technology program at the University of Northern Iowa. He serves on UNI
Paper ID #9544A Multi-Year Thermoelectric Energy Harvesting Project for First-Year En-gineering and Technology StudentsDr. Dale H. Litwhiler, Penn State - Berks DALE H. LITWHILER is an Associate Professor at Penn State - Berks in Reading, PA. He received his B.S. from Penn State University, M.S. from Syracuse University and Ph.D. from Lehigh University all in electrical engineering. Prior to beginning his academic career in, he worked with IBM Federal Systems and Lockheed Martin Commercial Space Systems as a hardware and software design engineer
Paper ID #5871A Project Based Implementation of a Power Systems Course for Electricaland Computer Engineering Technology StudentsDr. Hayrettin Bora Karayaka, Western Carolina University Bora Karayaka is an Electrical Engineering faculty at Kimmel School, Western Carolina University. With his over ten years of industry experience, he has extensive experience in project management, and a clear understanding of deadlines, industry requirements, safety and reliability issues, and other aspects in the power and energy fields. He is responsible for teaching electric power engineering courses in the department. Dr
AC 2012-3108: EFFECTIVE LOW-BUDGET APPROACH TO TEACHINGPHOTOVOLTAIC SYSTEMS TO ELECTRICAL ENGINEERING TECH-NOLOGY STUDENTS AT COMMUNITY COLLEGESDr. Elena V. Brewer, Erie Community College Elena V. Brewer is an instructor of Electrical Engineering Technology at Erie Community College. She received her Ph.D. in physics from the State University of New York, Buffalo. Her teaching interests include photovoltaic systems, DC/AC circuit analysis, digital electronics, PLCs, electrical motors and controls, and college and technical physics.Anthony P. Dalessio, Erie Community College Anthony P. Dalessio is an Assistant Professor of electrical engineering technology at Erie Community College. He earned a B.S. and M.S. in
AC 2011-400: RENEWABLE ENERGY BASED CAPSTONE SENIOR DE-SIGN PROJECTS FOR AN UNDERGRADUATE ENGINEERING TECH-NOLOGY CURRICULUMRadian G. Belu, Drexel University (Tech.) Dr. Radian Belu is Assistant Professor within the Engineering Technology (ET) program - Drexel Uni- versity, Philadelphia, USA. He holding the second position as Research Assistant Professor at Desert Re- search Institute, Reno, Nevada. Before joining to the Drexel University Dr. Belu hold faculty and research positions at universities and research institutes in Romania, Canada and United States. He also worked for several years in industry as a project manager and senior consultant. He has taught and developed undergraduate and graduate courses in
automobile manufacturers are training their HEV engineers and techniciansentirely “in-house,” which limits the number of engineers and technicians available for thegrowing hybrid market. There is a clear need for a systematic training program on HEV. Thispaper describes a funded project whose goal is to fill this need by developing an integratedlearning environment for HEV technology. This project targets engineering/engineeringtechnology students in 4-year universities, automotive technology students in communitycolleges, automotive engineers and technicians in industries, and K-12 technology teachers.1. IntroductionThe U.S. spends about $2 billion a week on oil imports, mostly for transportation fuel 1. Thisneed for oil affects our national
Paper ID #8547Undergraduate Research and Development Explores new Technologies in En-ergy Conservation InnovationsDr. Saeed D. Foroudastan, Middle Tennessee State University Saeed Foroudastan is the Associate Dean for the College of Basic and Applied Sciences (CBAS). The CBAS oversees 10 departments at Middle Tennessee State University. He is also the current Director for the Master’s of Science in Professional Science program and a professor of engineering technology at MTSU. Foroudastan received his B.S. in civil engineering, his M.S. in civil engineering, and his Ph.D. in mechanical engineering from Tennessee
Paper ID #10584New Trends and Technologies in Power Electronics and Motor Drives Educa-tionMr. Yazan Alsmadi, The Ohio State University Yazan Alsmadi received the B.S. degree (Summa Cum Laude) in electrical power engineering in 2010 from the Yarmouk University, Jordan, where he ranked 1st in his class. He received Yarmouk University Presidential Award for Academic Distinction in 2009 and Jordan Ministry of Higher Education and Scien- tific Research Award for Academic Distinction in 2007. He is currently working toward the Ph.D. degree in electrical and computer engineering at The Ohio State University (OSU), Columbus, OH
AC 2012-3200: INTEGRATION OF APPROPRIATE TECHNOLOGY INTOAN ALTERNATIVE ENERGY CLASSDr. Craig W. Somerton, Michigan State University Page 25.817.1 c American Society for Engineering Education, 2012 Integration of Appropriate Technology into an Alternative Energy ClassIntroductionFor eleven years the Department of Mechanical Engineering at Michigan State University hastaught a project based alternative energy course. The focus of the course is for students to usetheir background in thermodynamics, fluid mechanics, heat transfer, and electronics to performpredictive calculations for
Paper ID #13553From Lab to Market – Microfluidic Fuel Cell Stack: An Undergraduate Cap-stone ProjectDr. Irina Nicoleta Ciobanescu Husanu, Drexel University (Tech.) Irina Ciobanescu Husanu, Ph. D. is Assistant Clinical Professor with Drexel University, Engineer- ing Technology program. Her area of expertise is in thermo-fluid sciences with applications in micro- combustion, fuel cells, green fuels and plasma assisted combustion. She has prior industrial experience in aerospace engineering that encompasses both theoretical analysis and experimental investigations such as designing and testing of propulsion systems including
Paper ID #13445Developing and Deploying Flipped Classroom Resources for Renewable En-ergy TechniciansMr. Jim Pytel, CREATE and Columbia Gorge Community College, The Dalles, OR Jim Pytel has taught at Columbia Gorge Community College’s Renewable Energy Technology program since Fall 2008. He has taught the basic electronics series, hydraulics, digital electronics series, introduc- tion to wind energy, motor control, wind turbine safe access and rescue, and power generation classes. Jim has a Bachelor of Science in Electrical Engineering from Clarkson University in Potsdam, NY. He has worked as an electrical engineer for
Paper ID #11224Energy Harvesting from Air Conditioning Condensers with the use of Piezo-electric DevicesDr. Faruk Yildiz, Sam Houston State University Faruk Yildiz is currently an Associate Professor of Engineering Technology at Sam Houston State Uni- versity. His primary teaching areas are in Electronics, Computer Aided Design (CAD), and Alternative Energy Systems. Research interests include: low power energy harvesting systems, renewable energy technologies and educationDr. Ulan Dakeev, University of Michigan, Flint Dr. Ulan Dakeev is currently a faculty of mechanical engineering at the University of Michigan-Flint. His