Conference Session

Make It!

Collection

2015 ASEE Annual Conference & Exposition

Authors

Robyn Paul, University of Calgary; Kim Gould, Pivotal Projects

Tagged Topics

Diversity

Tagged Divisions

Manufacturing

engineering education.Kim Gould, Pivotal Projects Kim Gould graduated from the University of Calgary Schulich School of Engineering in 2011 with a B.Sc. in Civil Engineering, specializing in Energy and the Environment. She is currently working on building construction and renovation projects at Pivotal Projects, where she works as an Associate Project Man- ager. Kim was heavily engaged in extracurricular activities during her time as an undergraduate student. She feels that her involvement in the Civil Engineering Undergraduate Society and the Solar Decathlon ”Spo’pi” project greatly enhanced her overall educational experience, and she strongly encourages current students to take advantage of similar hands-on

Conference Session

Best Practices and Lessons Learned in Capstone Design Projects

Collection

2014 ASEE Annual Conference & Exposition

Authors

Arif Sirinterlikci, Robert Morris University

Tagged Divisions

Manufacturing

c American Society for Engineering Education, 2014 Interdisciplinary Capstone ProjectsIntroductionConducting a literature survey in capstone projects via the ASEE conference database aloneyields 1000 entries, with each entry to offer something valuable, by either looking at a largerpicture such as trends in capstone projects in the US for improving undergraduate education1 orstudying characteristics of similar projects in China2 or something specific such as integratingexternally funded research into capstone experiences3, utilizing service projects4, or just workingin thermal science in mechanical engineering5.A good portion of the capstone courses seen in engineering curricula are focusing on singlediscipline

Conference Session

Manufacturing Education Curriculum I

Collection

2007 Annual Conference & Exposition

Authors

John Anderson, Oregon Institute of Technology

Tagged Divisions

Manufacturing

AC 2007-2535: ADVANCED AEROSPACE MANUFACTURING EDUCATIONPROJECTJohn Anderson, Oregon Institute of Technology Page 12.183.1© American Society for Engineering Education, 2007 Advanced Aerospace Manufacturing Education ProjectAbstractThe Aerospace manufacturing industry segment is facing problems of a “graying” workforce. Inaddition they face the challenges of increasing productivity and integrating new materialsaccentuating the need to attract new engineers to the manufacturing workplace.This paper describes a project funded by the National Science Foundation to examine thechanging needs of the aerospace manufacturing industries, and to develop curricula materials

Conference Session

Multidisciplinary and Capstone Experiences in Manufacturing Education

Collection

2008 Annual Conference & Exposition

Authors

Robert Creese, West Virginia University; Deepak Gupta, Southeast Missouri State University

Tagged Divisions

Manufacturing

AC 2008-429: MULTI-DISCIPLINARY TEAM PROJECT WITH SOFTWARERobert Creese, West Virginia University Robert C. Creese is Professor of Industrial Engineering in the Industrial and Management Systems Engineering Department in the College of Engineering and Mineral Resources at West Virginia University in Morgantown, West Virginia. He obtained his BS, MS, and Ph.D. degrees from The Pennsylvania State University(1963), The University of California-Berkeley(1964), and The Pennsylvania State University(1972). He is a life member of ASEE, AACE-International and AFS as well as a member of ASM, AWS, AIST, ISPA, SCEA and SME.Deepak Gupta, Southeast Missouri State University Deepak Gupta is an Assistant

Conference Session

Manufacturing Laboratory Innovation

Collection

2006 Annual Conference & Exposition

Authors

Paul Nutter, Ohio Northern University

Tagged Divisions

Manufacturing

Simulation for Industrial ProjectsAbstractManufacturing simulation is a major component of the technology program at our university, andhas provided opportunities for numerous industrial projects. This software application is beingused extensively by many major corporations to model, analyze, and optimize complexmanufacturing operations, including Boeing, Lockheed-Martin, Daimler-Chrysler and Toyota.Companies are utilizing these advanced 3D digital manufacturing tools as a component of theirproduct life-cycle management to optimize and continuously improve the manufacturingprocesses. In many cases simulations are mandatory prior to implementation of any significantnew operation, project or process. Manufacturing technologists and engineers need to

Conference Session

Manufacturing Process Education

Collection

2011 ASEE Annual Conference & Exposition

Authors

Lisa Denny Choate, Cannon County High School; Kenan Hatipoglu, Tennessee Technological University; Ismail Fidan, Tennessee Technological University; Mohamed Abdelrahman, Texas A&M University, Kingsville

Tagged Divisions

Manufacturing

AC 2011-2162: RET PROJECT IN ADDITIVE MANUFACTURINGLisa Denny Choate, Cannon County High School Lisa D. Choate is a mathematics teacher at Cannon County High School in Woodbury, Tennessee. She teaches Algebra One, Honors Algebra Two and Geometry.Kenan Hatipoglu, Tennessee Technological University Kenan Hatipoglu is a graduate research assistant at Center for Manufacturing Research and Ph.D. student at Electrical and Computer Engineering Department at Tennessee Tech University, Cookeville, Tennessee. His research interests are in power system design and smart grid applications.Ismail Fidan, Tennessee Technological University Dr. Ismail Fidan is a faculty member at the college of engineering of Tennessee Tech

Conference Session

Design Education I

Collection

2010 Annual Conference & Exposition

Authors

Robert Creese, West Virginia University; Deepak Gupta, Southeast Missouri State University

Tagged Divisions

Manufacturing

AC 2010-191: COMBINED INDIVIDUAL-TEAM BASED PROJECTRobert Creese, West Virginia UniversityDeepak Gupta, Southeast Missouri State University Page 15.290.1© American Society for Engineering Education, 2010 Combined Individual-Team Based ProjectAbstract The basic manufacturing processes course was selected for an interdisciplinary teamproject for ABET requirements by the Industrial and Management Systems Engineering (IMSE)Department. The project is an integration of design criteria, material properties, mechanicalproperties and product cost. A software package is used to assist the students in the evaluation ofvarious materials and structural shapes. To improve

Conference Session

Innovations in Manufacturing Education

Collection

2009 Annual Conference & Exposition

Authors

Robert Creese, West Virginia University; Deepak Gupta, Southeast Missouri State University

Tagged Divisions

Manufacturing

AC 2009-118: SOFTWARE DEVELOPMENT FOR TEAM PROJECTS INMANUFACTURINGRobert Creese, West Virginia University Robert C. Creese is Professor of Industrial Engineering in the Industrial and Management Systems Engineering Department in the College of Engineering and Mineral Resources at West Virginia University in Morgantown, West Virginia. He obtained his BS, MS, and Ph.D. degrees from The Pennsylvania State University(1963), The University of California-Berkeley(1964), and The Pennsylvania State University(1972). He is a life member of ASEE, AACE-International and AFS as well as a member of ASM, AWS, AIST, ISPA, SCEA and SME.Deepak Gupta, Southeast Missouri State University Deepak Gupta is an

Conference Session

Strategies for Effective Education in Manufacturing

Collection

2017 ASEE Annual Conference & Exposition

Authors

Huseyin Sarper, Old Dominion University; Nebojsa I. Jaksic, Colorado State University, Pueblo; Linda Vahala, Old Dominion University

Tagged Divisions

Manufacturing

Paper ID #17761Metal Cutting and Manufacturing Economics Project for FreshmenDr. Huseyin Sarper, Old Dominion University H¨useyin Sarper, Ph.D., P.E. is a master lecturer in the Engineering Fundamentals Division and the Me- chanical and Aerospace Engineering Department at the Old Dominion University in Norfolk, Virginia. He was a professor of engineering and director of the graduate programs at Colorado State University – Pueblo in Pueblo, Col. until 2013. He was also an associate director of Colorado’s NASA Space Grant Consortium between 2007 and 2013. His degrees, all in industrial engineering, are from the Pennsylvania

Conference Session

Strategies for Effective Education in Manufacturing

Collection

2017 ASEE Annual Conference & Exposition

Authors

Faisal Aqlan, Pennsylvania State University, Behrend College; Omar Ashour, Pennsylvania State University, Behrend College; Keegan O'Bannon, Urick Ductile Solutions

Tagged Divisions

Manufacturing

Paper ID #19455Integrating Industry Projects into a Manufacturing Systems CourseDr. Faisal Aqlan, Pennsylvania State University, Behrend College Dr. Faisal Aqlan is an assistant professor of industrial engineering at Penn State Behrend. He earned the B.S. and M.S. in industrial engineering from Jordan University of Science and Technology in 2007 and 2010, respectively and the Ph.D. in Industrial and Systems Engineering from the State University of New York at Binghamton in 2013. Prior to joining the faculty at Behrend, Dr. Aqlan was a faculty member in industrial and system engineering at the University of New Haven where

Conference Session

Innovative Project-based Learning Practices in Manufacturing

Collection

2015 ASEE Annual Conference & Exposition

Authors

Tumkor Serdar, University of Pittsburgh, Johnstown

Tagged Divisions

Manufacturing

. Page 26.1267.1 c American Society for Engineering Education, 2015 Project based learning in Manufacturing Processes CourseAbstractIntegration of design and manufacturing is critical in producing successful products and systems.However, there are barriers between design and manufacturing related courses in engineeringeducation. Manufacturing courses provide students with vast amount of technical information.They can only convert this information to knowledge if they use it in real life problems orprojects. Most of the manufacturing courses cannot include such experience into theircurriculum. An attempt to integrate design projects into a Manufacturing Processes course hasbeen studied in this paper. Design

Conference Session

Capstone Manufacturing and Design

Collection

2013 ASEE Annual Conference & Exposition

Authors

Priya A. Manohar, Robert Morris University; Cathleen Jones, Robert Morris University

Tagged Divisions

Manufacturing

Paper ID #5970Improving Effectiveness of Interdisciplinary Design Project: Lessons LearntDr. Priya A. Manohar, Robert Morris University Dr. Priyadarshan Manohar is an Associate Professor of Engineering at Robert Morris University, Pitts- burgh, Pa. He has a Ph.D. in Materials Engineering (1998) and master’s degree in Computer Science (1999) from University of Wollongong, Australia and holds a bachelor of Engineering (Metallurgical En- gineering) degree from College of Engineering, Pune India (1985). He has worked as a post-doctoral fellow at Carnegie Mellon University, Pittsburgh (2001 – 2003) and BHP Institute for Steel

Conference Session

Manufacturing Materials and Processes

Collection

2014 ASEE Annual Conference & Exposition

Authors

Shekar Viswanathan, National University; Gary Bright Ph.D., National University

Tagged Divisions

Manufacturing

Paper ID #10293Effective Capstone Project in Manufacturing Design Engineering ProgramDr. Shekar Viswanathan, National University Dr. Viswanathan is a Professor at National University with the department of Applied Engineering. He has over 20 years of industrial and 20 years of teaching experience.Gary Bright Ph.D., National University Dr. Bright is an adjunct Associate Professor in the Department of Applied Engineering at National Univer- sity. He has an interdisciplinary background in cell biology, bioengineering, and biophysics with a Ph.D. in Cell Biology and Post-doctoral work in Biophyics and Bioengineering. After 9

Conference Session

Best Practices and Lessons Learned in Capstone Design Projects

Collection

2014 ASEE Annual Conference & Exposition

Authors

Morteza Sadat-Hossieny, Northern Kentucky University; Mauricio Torres, Northern Kentucky University

Tagged Divisions

Manufacturing

Paper ID #9229NKU-Mazak Corp. Joint Senior Project ProgramDr. Morteza Sadat-Hossieny, Northern Kentucky University Morteza Sadat-Hossieny is an associate Professor and Director of Mechanical and Manufacturing Engi- neering Technology at Northern Kentucky University. Dr. Sadat-Hossieny is actively involved in consult- ing and research in the areas of Alternative Energy, Industry-University Collaborations, and technology transfer mechanizes in manufacturing. Dr. Sadat-Hossieny received a B.S. degree in Mechanical En- gineering Technology for Oklahoma State University in 1983, an M.S. in Manufacturing Engineering

Conference Session

Projects in Manufacturing Curriculum

Collection

2017 ASEE Annual Conference & Exposition

Authors

Michael G. Mauk, Drexel University; Richard Chiou, Drexel University (Eng. & Eng. Tech.); Shraman Kadapa, Drexel University (Eng. & Eng. Tech.); Tzu-Liang Bill Tseng, University of Texas, El Paso

Tagged Divisions

Manufacturing

assistant in the mechanical and mechatronics lab at Drexel. He is also a researcher in Scalable Autonomous Systems Lab. His research interests are mainly in robotics which include motion planning and localization of ground robots.Prof. Tzu-Liang Bill Tseng, University of Texas, El Paso Dr. Tseng is a Professor and Chair of Industrial, Manufacturing and Systems Engineering at UTEP. His research focuses on the computational intelligence, data mining, bio- informatics and advanced manu- facturing. Dr. Tseng published in many refereed journals such as IEEE Transactions, IIE Transaction, Journal of Manufacturing Systems and others. He has been serving as a principle investigator of many research projects, funded by NSF, NASA

Conference Session

Projects in Manufacturing Curriculum

Collection

2017 ASEE Annual Conference & Exposition

Authors

Michael G. Mauk, Drexel University; Richard Chiou, Drexel University (Eng. & Eng. Tech.); Irina Nicoleta Ciobanescu Husanu, Drexel University (Tech.); David English; Michael Naceri Hazm

Tagged Divisions

Manufacturing

experience in curriculum development. Dr Husanu developed laboratory activities for Measurement and Instrumentation course as well as for quality control undergraduate and graduate courses in ET Masters program. Also, she introduced the first experiential activity for Applied Mechanics courses. She is coordinator and advisor for capstone projects for Engineering Technology.Mr. David English David English received and Associate in Electrical Technology Degree from New England Institute of Technology, presently David is about to complete his Electrical Engineering in Technology Degree from Drexel University. David has been employed in the power generation field for the past 10 years. The facility where David is presently

Conference Session

Design & Development Projects and Practices

Collection

2017 ASEE Annual Conference & Exposition

Authors

Gavin Garner, University of Virginia

Tagged Divisions

Manufacturing

Paper ID #20101Designing Electric Guitars to Teach Mechatronics and Advanced Manufac-turing TechniquesDr. Gavin Garner, University of Virginia Gavin Garner holds a bachelor’s degree in Physics from Colby College and Master’s and Ph.D. degrees in Mechanical and Aerospace Engineering from the University of Virginia. His primary area of expertise lies in the burgeoning field of Mechatronics (aka robotics). Over the past decade, he has built UVA’s Mechatronics program from scratch, developing over 50 hours of unique laboratory experiments as well as dozens of open-ended design projects. Through this experience, he has gained

Conference Session

Design & Development Projects and Practices

Collection

2017 ASEE Annual Conference & Exposition

Authors

Mingshao Zhang, Southern Illinois University, Edwardsville; Zhou Zhang, Stevens Institute of Technology (School of Engineering and Science); Nima Lotfi, Southern Illinois University, Edwardsville; Sven K. Esche, Stevens Institute of Technology (School of Engineering and Science)

Tagged Divisions

Manufacturing

) Sven Esche is a tenured Associate Professor at the Department of Mechanical Engineering at Stevens Institute of Technology. He received a Diploma in Applied Mechanics in 1989 from Chemnitz University of Technology, Germany, and was awarded M.S. and Ph.D. degrees from the Department of Mechanical Engineering at The Ohio State University in 1994 and 1997, respectively. He teaches both undergraduate and graduate courses related to mechanisms and machine dynamics, integrated product development, solid mechanics and plasticity theory, structural design and analysis, engineering analysis and finite element methods and has interests in remote laboratories, project-based learning and student learning assessment. His

Conference Session

Projects in Manufacturing Curriculum

Collection

2017 ASEE Annual Conference & Exposition

Authors

Roby Lynn; Kathryn W. Jablokow, Pennsylvania State University, Great Valley; Christopher Saldana; Thomas Marshall Tucker, Tucker Innovations; Thomas Kurfess, Georgia Institute of Technology

Tagged Divisions

Manufacturing

Conference Session

Design & Development Projects and Practices

Collection

2018 ASEE Annual Conference & Exposition

Authors

Michael G Mauk P.E., Drexel University; Richard Chiou, Drexel University (Eng. & Eng. Tech.); Carlos Michael Ruiz, Drexel University (Eng. & Eng. Tech.); Carol Jeanice Martin; Smarth H Chadha, Drexel University (Eng. & Eng. Tech.)

Tagged Divisions

Manufacturing

merit coverage in undergraduate STEM education.Moreover, photovoltaic solar cells and related supporting science and technology are readily-accessible and effective vehicles for interdisciplinary instruction in optics, semiconductormaterials and electronic devices. In addition, thermal imaging of solar cells (in operation)provides convenient demonstrations of the practice and utility of infrared cameras for research,process control, and quality assurance. Here we report student projects to develop solar cellanalysis and diagnostics techniques that are instructive introductions to solar cells and theiroperation.Improvements in solar cell performance and reductions in manufacturing cost will foster evenwider use of solar cells. These aims are

Conference Session

Design & Development Projects and Practices

Collection

2018 ASEE Annual Conference & Exposition

Authors

Richard Chiou, Drexel University (Eng. & Eng. Tech.); Michael G Mauk P.E., Drexel University; Tzu-Liang Bill Tseng, University of Texas, El Paso; Sanjay Jayadev, Drexel University (Eng. & Eng. Tech.); Carlos Michael Ruiz, Drexel University (Eng. & Eng. Tech.)

Tagged Divisions

Manufacturing

Paper ID #23940Enhanced 3-D Printing for Energy Harvesting Project Implementation intoGreen Energy Manufacturing LaboratoryDr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different engineering and technology

Conference Session

Capstone Projects in Manufacturing

Collection

2018 ASEE Annual Conference & Exposition

Authors

Irina Nicoleta Ciobanescu Husanu, Drexel University (Tech.); Michael G Mauk P.E., Drexel University; Perry B. Gold; Nando Tyler Orfanelli

Tagged Divisions

Manufacturing

Paper ID #23634From Capstone Student-led Project to Experiential Learning Module: Designand Manufacturing of an Integrated System of Pico-Hydroelectric Generatorand Water FiltrationDr. Irina Nicoleta Ciobanescu Husanu, Drexel University (Tech.) Irina Ciobanescu Husanu, Ph. D. is Assistant Clinical Professor with Drexel University, Engineer- ing Technology program. Her area of expertise is in thermo-fluid sciences with applications in micro- combustion, fuel cells, green fuels and plasma assisted combustion. She has prior industrial experience in aerospace engineering that encompasses both theoretical analysis and experimental

Conference Session

Capstone Projects in Manufacturing

Collection

2018 ASEE Annual Conference & Exposition

Authors

Richard Chiou, Drexel University (Eng. & Eng. Tech.); Michael G Mauk P.E., Drexel University; Carlos Michael Ruiz, Drexel University (Eng. & Eng. Tech.)

Tagged Topics

Diversity

Tagged Divisions

Manufacturing

Paper ID #23970A Senior Design Project in Fabrication of Microfluidic HIV/Zika Viral Loadand Monitoring Test Chips through Manufacturing ProcessesDr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different

Conference Session

Design & Development Projects and Practices

Collection

2018 ASEE Annual Conference & Exposition

Authors

Michael G Mauk P.E., Drexel University; Richard Chiou, Drexel University (Eng. & Eng. Tech.); Prashant Yadav

Tagged Divisions

Manufacturing

Paper ID #23900An Engineering Education Project: Using a Robot and Thermal Imaging toAutomate and Analyze Ultrasonic Welding of PlasticsDr. Michael G Mauk P.E., Drexel University Michael Mauk is Assistant Professor in Drexel University’s Engineering Technology program.Dr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an

Conference Session

Design & Development Projects and Practices

Collection

2017 ASEE Annual Conference & Exposition

Authors

Jahangir Ansari, Virginia State University

Tagged Divisions

Manufacturing

Design and Development of a Novel Wheelchair with Lifting and Flattening CapabilitiesAbstract:Autonomy in the area of mobility has always been highly valued, but is sometimes impaired by adisability. In many cases, this results in reliance on some form of external supporting mechanism.Wheelchair users may encounter a variety of obstacles in their daily activities based on theirlimitations. An optimum quality of life can be achieved through more freedom in mobility. Thepurpose of this project is to design and build a manual wheelchair equipped with assistive flatteningand lifting mechanisms to elevate the user to a target level.The mechanism is based on a scissor lift connected to the respective footrest, seat, and

Conference Session

Design & Development Projects and Practices

Collection

2017 ASEE Annual Conference & Exposition

Authors

Sheng-Jen Hsieh, Texas A&M University

Tagged Divisions

Manufacturing

Arduino with MicroLogix 1000 Series PLC Arduino MicroLogix 1000 Cost Low: around $20-$40 High: around $500-$700 Operating voltage 3.3V, 5V 24V, 110V Programming C / C++ Ladder logic language Application Amateur. Industrial Can be used for hobby or Focus is on industry-level small scientific projects for I/O manipulation quick deployment Flexibility High Moderate Reliability

Conference Session

Capstone Projects in Manufacturing

Collection

2018 ASEE Annual Conference & Exposition

Authors

Richard Chiou, Drexel University (Eng. & Eng. Tech.); Michael G Mauk P.E., Drexel University; Tzu-Liang Bill Tseng, University of Texas, El Paso; Carlos Michael Ruiz, Drexel University (Eng. & Eng. Tech.); Jean Carlo Espaillat; Senyu Wang

Tagged Divisions

Manufacturing

Paper ID #23936Student Project: Instrumentation and Control of Solar-Powered Algae Biore-actorDr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different engineering and technology courses at undergraduate and

Conference Session

Capstone Projects in Manufacturing

Collection

2018 ASEE Annual Conference & Exposition

Authors

Daniel R Khodos; David I Adegbesan, Vaughn College of Aeronautics and Technology; Oliver Khairallah; Shouling He, Vaughn College of Aeronautics & Technology

Tagged Divisions

Manufacturing

Engineering Department, Vaughn College, Flushing, NY Email: shouling.he@vaughn.eduABSTRACTIn this project, the Mechatronics Engineering students from the Department of Engineering andTechnology at a college in the northeastern region of the United States have developed aninnovative robotic vacuuming system. The system consists of two Omni-drive robots: a SlaveRobot (SR) and a Master Robot (MR). The SR works independently. It sweeps dust and dirt fromfloor surfaces, including the corners of a room, beneath cabinets, or behind tables and otherfurniture. Additionally, it sends information/data to the MR. The MR computes an efficient pathto vacuum dust and dirt in the sections of the room based on the information/mapping

Conference Session

Projects in Manufacturing Curriculum

Collection

2017 ASEE Annual Conference & Exposition

Authors

Richard Chiou, Drexel University (Eng. & Eng. Tech.); Irina Nicoleta Ciobanescu Husanu, Drexel University (Tech.); Michael G Mauk P.E., Drexel University; Tzu-Liang Bill Tseng, University of Texas, El Paso

Tagged Divisions

Manufacturing

Paper ID #19458A Senior Design Project in Prototyping Roadway Energy Harvesting withPiezoelectric CrystalDr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different engineering and technology courses at

Conference Session

Design & Development Projects and Practices

Collection

2018 ASEE Annual Conference & Exposition

Authors

Zhenhua Wu, Virginia State University; Laban K. Rutto; Shahzad Akbar, Virginia State University

Tagged Divisions

Manufacturing

years of industrial Research and Development experience at IBM Microelectronics, DuPont and Siemens. He has also conducted research at Oak Ridge National Laboratory, NASA, Naval Research Lab and Army Research Lab. Presently, he is a tenured Associate Professor in the Engineering Department at Virginia State University. c American Society for Engineering Education, 2018 Integration of Agriculture Research into the Manufacturing Design and Implementation ProjectsAbstractVirginia State University (VSU) is an 1890 Land-Grant institution. In the fiscal year (FY) 2015, aUSDA project jointly submitted by College of Agriculture and College of Engineering &Technology was funded