Collection

2022 ASEE - North Central Section Conference

Authors

Robert Michael P.E., Gannon University; David Gee, Gannon University; Paul Kummannoor Benny, Gannon University, Erie, Pennsylvania; Peter Caulfield

an engineering design project involving undergraduate engineeringstudents in a junior-level machine design class. The project involves the design of a multi-stage,parallel shaft, gearbox used as a speed-reducer. The main objective of the project is for thestudent to experience the open-ended, iterative nature of the design process. This paper furtherdiscusses a student-led honors project involving not only the design but also the construction of alow-cost gearbox demonstration unit. The gearbox demonstration unit is designed and built togive future students in the machine design course a visual, hands-on way to understand andinternalize the working of gear trains as either speed reducers or torque reducers. The paperdiscusses how the model

Collection

2022 ASEE - North Central Section Conference

Authors

Ramakrishnan Sundaram, Gannon University

tools in order to function effectively in the engineering industry. Inrecent years, artificial intelligence (AI), machine learning (ML), and deep learning (DL) haveburgeoned to successfully reduce or eliminate human interaction while yet processing largeamounts of data.The broad description of the introductory course in applied artificial intelligence is to designphysical systems requiring a background in digital signal and image processing, artificial neuralnetwork architectures, and specific programming skills in C/C++/Python. The students will haveindividual and team responsibilities as they function on project teams tackling real-worldapplications of AI. In addition, possessing the knowledge and skills to design and implementmodels in the

Collection

2018 ASEE Zone IV Conference

Authors

Mark Todd Gordon, California Baptist University; Seunghyun Chun, California Baptist University; Xueyan Sarah Zhao, California Baptist University; Michael Jean-Claude Nalbandian, California Baptist University; Mi Kyung Han, California Baptist University; Mario Oyanader, California Baptist University

. These studies have not only shown an increase in the intellectual development ofstudents, but showed improvements in problem-solving, collaborative work, and creativity2,3.Additionally, project-based learning has been shown to drastically increase retention rates,especially for women and minorities in engineering disciplines, while also increasing the longterm retention of engineering material4,5,6.One challenge of first year engineering design courses is effectively exposing students, many ofwhom have not yet decided on a preferred engineering major to pursue, to the differentengineering disciplines offered at their institution. This is done in order to make them moreinterested and confident in pursuing an engineering degree and allow them to

Conference Session

First-Year Programs: Integrating Computing into the First Year

Collection

2019 ASEE Annual Conference & Exposition

Authors

Djedjiga Belfadel, Fairfield University; Marcia Arambulo Rodriguez, Fairfield University; Michael Zabinski, Fairfield University; Ryan Munden, Fairfield University

Tagged Divisions

First-Year Programs

. Project-based courses attempt to resolve the tension betweenproviding training in the fundamentals of engineering and problem solving by motivating and engagingstudents. Active learning in first year engineering courses is believed to improve retention and appeal toa diverse population of students [1].We report on a two-year study using the Arduino platform to build a series of projects. We have usedArduino platform projects in two-course instances and present survey results describing studentresponses to learning with Arduino. 1. Introduction Multiple active learning projects and hands-on activities are incorporated in the Fundamentals ofEngineering course. This course is a required course for first-semester engineering students in

Conference Session

Technical Session III

Collection

2018 FYEE Conference

Authors

Mary Fraley, Michigan Technological University; Mary Raber, Michigan Technological University; Gretchen L. Hein, Michigan Technological University

Tagged Topics

Diversity, FYEE Conference Sessions

projects developed encompassed seven critical skills, they do not “hook” students early in theirclassifications (Student Life, Assistive Technologies, college career. Courses that engage students in hands-onOutdoor Activities, Appliances, Personal Use innovation and entrepreneurial activities are one way toConveniences, Environmental/Road Management/Office create that hook. At Michigan Technological University, weArrangement, and Phone/Portable Technologies). Over piloted modifications in a first-year engineering course thatthe course of the semester student teams completed allow students the opportunity to learn about innovation andproject deliverables. This

Conference Session

Multidisciplinary Design in the Classroom

Collection

2007 Annual Conference & Exposition

Authors

Rainer Seidel, The University of Auckland; Linda Haemmerle, Plume Ltd.; Chris Chambers, CPC Consulting Ltd.

Tagged Divisions

Design in Engineering Education

AC 2007-1573: A MULTIDISCIPLINARY DESIGN EDUCATION APPROACH FORSUPPORTING ENGINEERING PRODUCT INNOVATIONRainer Seidel, The University of Auckland Rainer Seidel (Dipl.-Wirtsch.-Ing., Ind.Eng., PhD) works in the Department of Mechanical Engineering at the University of Auckland, New Zealand. His main research, teaching and consulting activities are in the areas of technology management and strategic business innovation in SMEs, productivity improvement in manufacturing, new product development, and engineering education. He is currently the Project Director of the multi-disciplinary R&D project ‘High Technology Design for Engineering Product Innovation’ funded by the New Zealand

Conference Session

Mechanical Engineering Technology Curriculum

Collection

2008 Annual Conference & Exposition

Authors

Trian Georgeou, Arizona State University; Scott Danielson, Arizona State University

Tagged Divisions

Engineering Technology

made by the students). Following thiscourse, students can also take either a high-performance-machining course and or a four- andfive-axis machining course.The paper briefly describes the CNC courses and the software and equipment used by thestudents. But, most importantly, the paper describes the benefits realized by the mechanical,aeronautical, and automotive engineering technology students from taking these courses. Thesophistication of the student’s design and build projects in their capstone class has seen adramatic increase since the students have begun to acquire the CNC machining experience.Thus, the paper builds a case for the value-added aspect of CNC machining within MechanicalEngineering Technology.IntroductionThe authors believe

Conference Session

Successful K-12 Programs for Girls & Minorities

Collection

2008 Annual Conference & Exposition

Authors

Leslie Wilkins, Maui Economic Development Board; Isla Young, Maui Economic Development Board, Inc.

Tagged Divisions

K-12 & Pre-College Engineering

AC 2008-2413: SERVICE LEARNING: COMMUNITY AND CULTURAL VALUESTHAT ENGAGE UNDER REPRESENTED GROUPS INTO THE STEM PIPELINELeslie Wilkins, Maui Economic Development BoardIsla Young, Maui Economic Development Board, Inc. ISLA YOUNG: Ms. Young joined the MEDB Women in Technology Project in December 2003. She serves as a Program Manager working with students, educators, industry leaders, and the community. She serves as the Hawaii statewide coordinator for Project EAST profiled in this paper. She holds a baccalaureate degree in Business and Information Systems form the University of Phoenix. Email: isla@medb.org

Conference Session

Design Methods and Concepts

Collection

2006 Annual Conference & Exposition

Authors

S. Balachandran, University of Wisconsin-Platteville

Tagged Divisions

Design in Engineering Education

and missiles from the Indian Institute of Science, India in 1970. He worked as Project Engineer at the Indian Space Research Organization, India from 1970 to 1974 and worked at Va. Tech. as Research Assistant, Instructor and Asst. Prof. from 1975 to 1985. He received Ph.D. degree in I.E. & O.R. from Va. Tech. in 1984. He worked as Assoc. Prof., Professor and Chairman of Industrial Engineering at UW - Platteville from 1985 to 1994. He worked as a manufacturing engineering consultant at John Deere Dubuque Works, Dubuque, IA from 1996 to 2001, developed simulation models to design manufacturing systems, and provided more than 6000hours of assistance in ergonomics, quality engineering

Conference Session

Ocean and Marine Division Technical Session 1

Collection

2019 ASEE Annual Conference & Exposition

Authors

Byul Hur, Texas A&M University; Rogelio Casas Jr, Texas A&M University; David Anthony Cervantes; Justin Raymond Comer; Brielle Roxanne De Anda; Landon James Ledbetter, Oncor Electric Delivery; Andres Fly; Erika L. Davila, Texas A&M University; Grace E Tsai, Texas A&M University

Tagged Divisions

Ocean and Marine

previously. His research interests include Mixed-signal/RF circuit design and testing, measurement automation, environmental & biomedical data measurement, and educational robotics development.Mr. Rogelio Casas Jr, Texas A&M University Rogelio Casas Jr. was an ESET student at Texas A&M University and graduated in the Fall of 2018. He was the Project Manager throughout the project and is currently working at General Motors in Austin, Texas as a Software Developer. He plans on continuing his education through hands-on training and a potential Masters in Computer Science.Mr. David Anthony Cervantes David Cervantes graduated with a B.S degree in Electronic Systems Engineering Technology from Texas A&M

Conference Session

Entrepreneurship & Engineering Innovation Division Technical Session 8

Collection

2019 ASEE Annual Conference & Exposition

Authors

Anthony Ferrar, Temple University; Dustyn Roberts P.E., Temple University

Tagged Divisions

Entrepreneurship & Engineering Innovation

Engineering from Carnegie Mellon Uni- versity (2003), her M.S. in Biomechanics & Movement Science (2004) from the University of Delaware, and her Ph.D. in Mechanical Engineering (2014) from New York University. She is passionate about translational research and engineering education. c American Society for Engineering Education, 2019 Sustainable Senior Design: MVP Engine (Work in Progress)IntroductionThis work in progress paper reports on preliminary results of the Sustainable Senior Design:Minimum Viable Product (MVP) Engine project, which addresses the gap in resources foraddressing sustainable entrepreneurship in the engineering curricula

Conference Session

Instrumentation Division Technical Session 2

Collection

2018 ASEE Annual Conference & Exposition

Authors

Dale H. Litwhiler, Pennsylvania State University, Berks Campus

Tagged Divisions

Instrumentation

required to developand implement a test procedure to verify specification compliance. A modest budget wasprovided to allow the design teams to purchase materials. The campus machine shop is very wellequipped and staffed and was available to help fabricate custom parts. 3-D printing of parts wasalso an option for the teams to use. An instrumentation amplifier circuit board kit was availablefor the students to integrate into their design. The project provided a very good means ofunifying many aspects of the course. The fabrication experience gained through this project isalso a valuable component of the mechanical engineering curriculum. This paper presentsexamples of student accelerometer designs and data from prototype testing. Equipment

Conference Session

NSF Grantees Poster Session

Collection

2017 ASEE Annual Conference & Exposition

Authors

John Moreland, Purdue University Northwest; Michael Edward Hoerter, CIVS; SHENG WANG, PURDUE UNIVERSITY NORTHWEST CIVS

Tagged Topics

NSF Grantees Poster Session

Troubleshooting and Safety SimulatorAbstractAn NSF-ATE project is being developed building upon two previous projects: 1) “Wind TechTV”, a 2010 ATE project which created a library of online training videos for wind turbinemaintenance, and 2) "Mixed Reality Simulators for Wind Energy Education", a U.S. Departmentof Education FIPSE project which produced a series of simulators for wind energy education.The current project is integrating a library of real scenarios with existing simulators to allowstudents to have hands-on experiences that would otherwise be dangerous or impractical. Itincludes open-ended questions for students to learn critical thinking and problem solving.An interdisciplinary team including representatives from four community colleges

Conference Session

COED: IOT and Cybersecurity

Collection

2018 ASEE Annual Conference & Exposition

Authors

David Border, Bowling Green State University

Tagged Divisions

Computers in Education

audio player on a single board computer.The hardware platform chosen was an Odroid-C1. The board features a multicore RISC architectureARM processor. Like other single board computers of its class, it features much RAM, as well aseMMC memory which acts as “disk” memory. The base unit features an abundant array of connectionsto the outside world, including 40 GPIO pins, four USB ports for keyboard, mouse, WiFi USB device,plus separate RJ45 Ethernet jack, plus micro-USB and micro-HDMI ports. Odroid markets a platformcompatible 3.2” TFT touchscreen display for use with the C1. In this project, the programmedtouchscreen provides a user-friendly kiosk-like interface. The HMDI port acts as the streaming audiooutput port.Project software development

Conference Session

ConstDiv Technical Session 5 - Pedagogy & Accreditation II

Collection

2019 ASEE Annual Conference & Exposition

Authors

Tom Michael Leathem, Auburn University; Eric M. Wetzel, Auburn University

Tagged Divisions

Construction Engineering

Paper ID #26480Delivering Multidisciplinary Experiences in Education: A Study of Construc-tion Program Practices to Meet Accreditation RequirementsDr. Tom Michael Leathem, Auburn University Tom Leathem is an Assistant Professor in the McWhorter School of Building Science at Auburn Univer- sity where he teaches courses in Estimating, Construction Documents, Scheduling, and Project Delivery. He has 11 years industry experience in commercial construction management, holds a Ph.D. in Educa- tion, an M.S. in Integrated Design & Construction, and a B.S. in Construction Management. His areas of research include construction

Conference Session

CEED Technical Session II: Developing Research and Design Skills Through Experiential Learning

Collection

2019 ASEE Annual Conference & Exposition

Authors

Jeremy Straub, North Dakota State University

Tagged Divisions

Cooperative and Experiential Education

ProgramAbstractThe North Dakota State University commenced a National Science Foundation (NSF) sponsoredresearch experience for undergraduates (REU) program in the summer of 2018. This programbrought 12 students from different areas of the United States to North Dakota to performcybersecurity research related to cyber-physical systems. This paper reports the results of thisinitial year of the REU program. In particular, it discusses the projects that the studentsundertook as well as the benefits that they derived from participation.1. IntroductionThis evidence-based paper assesses the educational benefits produced for student participants inthe first year of a U.S. National Science Foundation funded research experience forundergraduates (REU) on the topic

Conference Session

Best Practices for Two-Year Students Majoring in Engineering & STEM Fields

Collection

2015 ASEE Annual Conference & Exposition

Authors

April K. Andreas, McLennan Community College; Paulina Z. Sidwell, McLennan Community College

Tagged Divisions

Two Year College Division

Society for Engineering Education, 2015 Incorporating Research and Design in a Community College Engineering ProgramAbstractTraditional engineering undergraduate research and design is typically seen in four-yearinstitutions, restricted to junior- and senior-level students. In large institutions, freshman- andsophomore-level students are generally seen to be ill-equipped to take on complex projects,particularly while muddling through the basics of calculus, physics, and electronics. Ourinstitution, McLennan Community College, through a partnership with the Council onUndergraduate Research (CUR), has been challenging that assumption. Students are beingintroduced to research and design methods in the

Conference Session

Manufacturing and Machine Component Design

Collection

2015 ASEE Annual Conference & Exposition

Authors

George Youssef, California State University, Northridge; J. Michael Kabo, California State University, Northridge

Tagged Divisions

Mechanical Engineering

have retained many of the traditional pedagogies used in teaching machine design andsupplement this educational experience with a significant project component based on currentcustomer-need or economical challenge. Through the project students learn to: 1) create thedesign envelop based on a provided statement or requirement document; 2) define specific,meaningful, and measurable goals; 3) synthesize creative ideas to solve the problem; 4) performa patent search to verify the innovative nature of their ideas; 5) produce a design matrix withevaluation criteria based on the goals and expected functionality; and 6) perform an in depthengineering analysis based on mechanics of materials, manufacturability, assembly, andpackaging. The inclusion of

Conference Session

Learning Through Service

Collection

2015 ASEE Annual Conference & Exposition

Authors

Malini Natarajarathinam, Texas A&M University

Tagged Topics

Diversity

Tagged Divisions

Community Engagement Division

Paper ID #14178Service learning as a philanthropy effort of a student organizationDr. Malini Natarajarathinam, Texas A&M University Dr. Malini Natarajarathinam is an Associate professor with Department of Engineering Technology and Industrial Distribution. She teaches classes on strategic relationships for industrial distribution, distribu- tion information systems and new directions in Industrial Distribution. She is also the founding faculty and advisor for the Society of Women in Industrial Distribution (SWID). She works on many service learning projects with her students where they work with many local

Conference Session

Industrial Engineering Division Technical Session 1

Collection

2016 ASEE Annual Conference & Exposition

Authors

Lesley Strawderman, Mississippi State University; Shuchisnigdha Deb, Mississippi State University

Tagged Divisions

Industrial Engineering

a method of teaching that integrates community service into an academiccourse through applied learning to enrich the educational experience of students and meet theneeds of the community. In this paper, we describe the integration of service-learning into anundergraduate industrial engineering course.Over the past three years, students in the course have worked with four community partners tocomplete service-learning projects. The community partners have included a high school,community library, local farm, and an assistive technology center. Students worked directly withcommunity partners to improve operations and ergonomics within their facilities. Through theprojects, students gained a deeper understand of the course content, as well as

Conference Session

NSF Grantees Poster Session I

Collection

2016 ASEE Annual Conference & Exposition

Authors

Saniya Leblanc, The George Washington University; Steffi A Renninger, George Washington University; Ekundayo Shittu, George Washington University

Tagged Topics

NSF Grantees Poster Session

1academic year, long-term, interdisciplinary research projects, nanotechnology equipmentspecialization projects, and mentorship and training with graduate students, professors, researchscientists, and equipment vendors. The program is interdisciplinary with students and professorsfrom multiple departments and schools across the university; topics include fabrication,characterization, and commercialization. The program is led by professors from threedepartments: mechanical and aerospace engineering, electrical and computer engineering, andengineering management and systems engineering. Key features of the university’s School of Engineering and Applied Science (SEAS) arerelevant to understand the program setting and its applicability to other

Conference Session

COED: EE Topics

Collection

2018 ASEE Annual Conference & Exposition

Authors

Cheng Chih Liu, University of Wisconsin-Stout

Tagged Divisions

Computers in Education

register and can be calculated using integer division and the modulusoperator. The Verilog code for doing this is shown here:Student Final ProjectThe final project is the capstone for this class. Table III is a list of all video game projects in2017. Table IV shows whether the lab assignments and student projects have a focus on gamingfrom 2015 to 2017. Each project group was formed by students and had between one to threestudents per group. Students can choose their project with a gaming focus or a project of otherfocus using the Basys-3 board. Table V shows the number of student projects with a gamingfocus and other design focus, as well as the project evaluation outcome.Table III List of video game projects in digital system design course in

Conference Session

Community Engagement Division Technical Session 7

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

M. Loraine Lowder, Kennesaw State University; Christina R Scherrer, Kennesaw State University; Kevin Stanley McFall, Kennesaw State University; David R Veazie P.E., Kennesaw State University

Tagged Topics

Diversity

Tagged Divisions

Community Engagement Division

his entire undergraduate senior year at the Lule˚a University of Technology in Sweden 50 miles south of the Arctic Circle. After graduating with his B.S. in Mechanical Engineering from Virginia Tech, his international travels continued during masters studies at MIT with an appointment at the Japan Atomic Energy Research Institute in Japan. His work there involved heat transfer in the superconducting magnet systems for the International Thermonuclear Experimental Reactor project. Such positive international experiences led to a research fellow position at Dalarna University in Sweden after graduation from MIT with his M.S. in Mechanical Engineering. His research shifted to artificial intelligence and image

Collection

2019 ASEE Midwest Section Conference

Authors

Michael Hennessey

(EML) into an undergraduate Dynamics course within a mechanical engineering program. A “KEEN” team project was given to the students in which they were asked to pretend that they were members of a startup company that would design, build, test, market, and sell a product with some dynamics content to it. As part of the exercise, the 20 teams worked on idea generation, concept development and identification of required activities, in addition to writing a draft Business Plan. Product ideas varied across different economic sectors including power generation, sports technology, transportation, food and beverage technology, and health care. Grading of the resulting reports incorporated factors such as: (1

Conference Session

A Technology Potpourri I

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Vassilios Tzouanas, University of Houston, Downtown; Lisa Deane Morano, University of Houston, Downtown; Hung Pham; Anish Khatiwada, University of Houston, Downtown; Jonathan Lopez

Tagged Divisions

Engineering Technology

food consumption. By using organicwaste, this project ensures sustainable consumption and production patterns. Converting wasteto bioethanol creates a fuel from a biomass that would have been energetically wasted during thedecomposition process. Using bioethanol or blending it with gasoline both reduce the relianceon fossil fuel and ultimately reduce the carbon dioxide entering the atmosphere. Thus, it is a trulysustainable transport fuel.In this paper, the design of the bioreactor, instrumentation and automation mechanisms arepresented. Kinetics studies and the results from the optimization of the reactor operatingconditions area also discussed. Since such work also was carried out as part of engineeringtechnology students’ senior capstone

Conference Session

Topics at the intersection of Aero and Naval Eng.

Collection

2008 Annual Conference & Exposition

Authors

Leigh McCue, Virginia Polytechnic Institute and State University; Christina Pace, Virginia Polytechnic Institute and State University

Tagged Divisions

Ocean and Marine

© American Society for Engineering Education, 2008 Sea-based aviation to bridge the gap between aerospace and naval engineering students U.S. Navy photo by MCSN David A. BrandenburgAbstractThis case study focuses upon encouraging discussion and awareness of aerospace and navalengineering opportunities in a classroom comprised of both majors through a two-part(individual and group) project on sea-based aviation. In this paper, the result of the studentsinteractive thought process is summarized with input as to how to make similar exercises moreeffective in future course offerings. Additionally, student feedback as to the use of thisassignment for emphasizing to them the importance of a multi

Conference Session

ECE Laboratory Design

Collection

2006 Annual Conference & Exposition

Authors

Fitra Khan, University of Texas-Brownsville; Mahmoud Quweider, University of Texas-Brownsville; Juan Iglesias, University of Texas-Brownsville; Amjad Zaim, University of Texas-Brownsville

Tagged Divisions

Electrical and Computer

networking laboratory (CNL)1. Built around a 24-nodedistributed Beowulf2,3 supercomputer, the main goal of CNL is to enhance the understanding ofparallel computing principles in key courses of the Bachelor of Science in Computer Science(BS-CS) degree, the two-year Associate in Applied Science in Computer Information Systems(AAS-CIS), and the four-year Bachelor of Applied Technology in Computer InformationSystems Technology (BAT-CIST).The strategy has been to use this supercomputer as the main instrument to infuse concepts andprinciples into targeted courses by creating a set of laboratory modules and capstone projects.Such project framework in CS education is strongly emphasized in the ACM/IEEE-CS curriculamodel4. CNL has aided in motivating the

Conference Session

Tricks of the Trade I

Collection

2013 ASEE Annual Conference & Exposition

Authors

Kimberly Grau Talley P.E., Texas State University - San Marcos

Tagged Divisions

New Engineering Educators

, and her research focus is in active learning and project based learning in engineering and technology education. Contact: kgt5@txstate.edu Page 23.869.1 c American Society for Engineering Education, 2013 Lights, Camera, Action!: Peer-to-Peer Learning through Graduate Student Videos  AbstractThe senior level “Construction Estimating” course at Texas State University - San Marcos is co-listed for master’s students to receive graduate credit. To make this course a graduate leveloffering the master’s students have traditionally completed an additional assignment in

Conference Session

Innovations in Teaching Transportation and Geotechnical Engineering

Collection

2012 ASEE Annual Conference & Exposition

Authors

James L. Hanson, California Polytechnic State University; David J. Elton, Auburn University

Tagged Divisions

Civil Engineering

teaming exercises that involvedstudents from two universities. Students were assigned to groups containing membersfrom both universities to complete laboratory assignments. Activities were established formeaningful and entertaining introductions between the individual team members prior totechnical interactions. Assignments were developed to require sharing of data andcollaborations amongst all team members, with special focus on inter-universitycollaborations and communications. Detailed electronic communications of the teamswere evaluated for assessment of project success. In addition, surveys were conductedand focus group discussions (facilitated by an external assessment coordinator) wereundertaken after the experiences to provide depth to

Conference Session

K-12 and Pre-College Engineering Division Poster Session

Collection

2014 ASEE Annual Conference & Exposition

Authors

Deborah Besser P.E., University of St. Thomas; Debra Monson, University of St. Thomas

Tagged Divisions

K-12 & Pre-College Engineering

informalengineering; learning theory and engineering; lesson planning, assessment and engineering;engineering practices in the K-12 classroom; the influence of engineering and technology onsociety; participant microteaching and curriculum unit development; A Framework for K-12Science Education; and final project discussion.Preliminary FindingsA case study of classroom to practice allows for a preliminary understanding of the coursestrengths and weaknesses. Data was gathered from multiple interventions including reflectionsfrom the summer course, classroom observations while the teachers were teaching in the K-12classroom, teacher interviews, and student interviews. Teacher reflections from the summercourse were studied to identify key understandings and