Conference Session

Installation, Integration, and Development

Collection

2017 ASEE Annual Conference & Exposition

Authors

Sung Joon Suk, Western Carolina University; Steven Anthony Sciara, Western Carolina University; George D Ford, Western Carolina University

Tagged Divisions

Energy Conversion and Conservation

expectancy of the modules.It is estimated by tests developed by the International Electro-technical Commission that PVmodules should be reliable up to 30 years once installed, but exposure to outdoor conditions maycause an escalated rate of degradation not represented in laboratory tests (Sharma & Chandel,2013).A study was conducted on a 26+ year old PV power plant in Phoenix, Arizona to determineperformance, durability and reliability. The plant consisted of eight sub-arrays rated at 200kWdc,standard test conditions (STC). Power output measured in 2011 at STC decreased from theoriginal 200 KWdc to 76 kWdc representing a power loss of 62% over the 26+ years of operation.It was also determined that some installation practices contributed to the

Conference Session

ETD Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

Faruk Yildiz, Sam Houston State University; Keith L. Coogler, Sam Houston State University

Tagged Topics

Diversity

Tagged Divisions

Engineering Technology

paper, and time spent in the laboratory environment. Theclass was evaluated by the professor to assess the students’ success in learning and theeffectiveness of resources that may be required for future engineering-related interdisciplinaryclasses.II. ObjectivesThe main objective of the projects in this course is for interdisciplinary students to work as teamsto develop and/or improve hands-on skills as they work with other students from different fieldsof study. The projects are assigned to obtain objectives which involve the design anddevelopment of a variety of engineering and technology-related projects in order to fulfill theeducational goals of their field of studies. Students are also tasked to learn how to workeffectively with others as

Conference Session

The Best of First-Year Programs Division

Collection

2017 ASEE Annual Conference & Exposition

Authors

Darlee Gerrard, University of Toronto; Kirstin Newfield, University of Toronto; Narges Balouchestani Asli, University of Toronto; Chirag Variawa, University of Toronto

Tagged Divisions

First-Year Programs

implications for boththe student and instructor. Data may serve to inform the development of cross-disciplineengineering strategies for course and program design that addresses workload concerns. Theinformation gathered may help promote a more inclusive and accessible first-year undergraduateexperience by integrating an evidence-based understanding of workload.BackgroundEngineering undergraduate programs are known to be very demanding as course schedules havea significant number of classes, laboratories and tutorials. On average, a first year engineeringstudent at the institute of our study will have 27 hours of classes/tutorials and laboratory. Thisworkload is just for attending classes and does not account for studying, assignments, projectsand

Conference Session

Biological & Agricultural Division Technical Session 2

Collection

2018 ASEE Annual Conference & Exposition

Authors

Pradeep Kashinath Waychal, Western Michigan University; Pawan Ramchandra Galande

Tagged Topics

Diversity

Tagged Divisions

Biological and Agricultural Engineering

unit, soil and irrigation water analysis laboratory, nursery,earthworm production unit, medicinal and aromatic plant garden, sheep and goat farm, fruitorchard mother block, shade-net, and hydroponic project. The college has departmentallaboratories that are renovated and furnished with state of the art equipment. The college isaccredited by the university through 2018-19 and offers a three-year diploma program, whichadmits 90 students after graduating from high schools. The admissions are based on students’performances in the high school graduation examination, which is a government managed state-wide examination. The main objectives of the diploma program are, 1) to develop competence amongst itsstudents for solving problems related to

Conference Session

Mechanical Engineering Division Technical Session 5

Collection

2018 ASEE Annual Conference & Exposition

Authors

PS Dhanasekaran, University of Minnesota, Duluth; Ping Zhao, University of Minnesota, Duluth

Tagged Topics

Diversity

Tagged Divisions

Mechanical Engineering

chapter and research papers on machining of composites. He has a diverse industrial experience for 27 years, in design, research and manufacturing of electro me- chanical systems, such as design of various types of gear and gear boxes, antennas and light and heavy fabricated structures, for communication, TV telecast, natural disasters management and Telemedicine application. Dr PS, designed and manufactured various types of antenna’s weighing from 200 pounds to 100,000 pounds. He was also actively involved in configuring the antenna controls and selection of motor and motor controllers. Dr PS, has advised more than 40 senior/capstone projects. One of his project won the national award from Airforce Research Laboratory

Conference Session

Manufacturing Curriculum and Course Innovations

Collection

2018 ASEE Annual Conference & Exposition

Authors

Faisal Aqlan, Penn State Behrend; Qi Dunsworth, Penn State Behrend; Mary L Kahl, The Pennsylvania State University, the Behrend College

Tagged Divisions

Manufacturing

different toolsand techniques employed by the design, analysis, development, implementation, andimprovement of modern manufacturing systems. The general concepts provided in this courseare also widely applicable to service industries. The course involves hands-on learning andexercises in laboratories as well as real world industry projects. Upon satisfactory completion ofthe course, students should be able to:  Explain the key performance measures of manufacturing systems.  Describe the different techniques and tools for manufacturing systems design and analysis.  Compare key techniques used to improve manufacturing systems productivity and efficiency.  Apply process improvement methods in real manufacturing or

Conference Session

Environmental Engineering Division Technical Session 3

Collection

2018 ASEE Annual Conference & Exposition

Authors

Bettina Jeanine Casad, University of Missouri, St. Louis; Monica Palomo P.E., California State Polytechnic University, Pomona; Natalie Mladenov, San Diego State University

Tagged Topics

Diversity

Tagged Divisions

Environmental Engineering

Environment Association (CWEA), and Engineers Without Boarders (EWB) stu- dent chapters. Additionally, Dr. Palomo is the CE Water Analysis laboratory director and coordinates all teaching, research and safety training activities in the engineering laboratory. Dr. Palomo conducts research in surface water quality improvement via natural treatment systems, water and wastewater treat- ment processes, and water education. She is involved in outreach programs for K-12 students to increase the participation of Hispanic female students in STEM fieldsDr. Natalie Mladenov, San Diego State University Dr. Natalie Mladenov is an associate professor and William E. Leonhard Jr. Chair in Civil, Construction, and Environmental Engineering

Conference Session

Practice I: Academic Success

Collection

2018 ASEE Annual Conference & Exposition

Authors

Markeya S. Peteranetz, University of Nebraska, Lincoln; Duane F. Shell, University of Nebraska, Lincoln; Leen-Kiat Soh, University of Nebraska, Lincoln; Elizabeth Ingraham, University of Nebraska, Lincoln; Abraham Flanigan

Tagged Divisions

Educational Research and Methods

semester. The instructors of the two sectionscoordinated and synchronized their lecture topics, shared their lecture notes throughout thesemester, and met weekly—with their shared teaching assistants—to discuss issues related tostudent learning and course activities. Additionally, the two sections shared laboratory sections 3and used the same graded assignments and tests. Results of this study again showed that studentsin classes with CCEs score higher on the CS knowledge test than students in non-CCE classes,further supporting the hypothesis that CCEs contribute to learning core CS concepts.Recent Findings The most recent extension of our project is the investigation of the impact of CCEs

Conference Session

Developing Teaching and Mentoring Skills

Collection

2018 ASEE Annual Conference & Exposition

Authors

Joseph C. Tise, Pennsylvania State University; Kirsten S Hochstedt, Pennsylvania State University; Sarah E. Zappe, Pennsylvania State University; Esther W. Gomez, Pennsylvania State University; Manish Kumar

Tagged Topics

Diversity

Tagged Divisions

Graduate Studies

students work with faculty members atthe host university, they typically work most closely on a day-to-day basis with graduate studentor postdoctoral mentors who work in the faculty member’s laboratory. The majority of theengineering mentorship literature is focused on faculty as mentors, not graduate student mentorsor postdoctoral researchers. Generally, much of the existing literature relating to mentorship in engineering exploresthe mentor’s experience (typically focusing on faculty as mentors) (Dolan & Johnson, 2009;Mena & Schmitz, 2013; Revelo & Loui, 2016; Tsai, Kotys-Schwartz, Louie, Ferguson, & Berg,2012, 2013) rather than the mentee’s experience (Ahn, 2014; Ahn, Cox, Diefes-Dux, &Capobianco, 2013; Faurot, Doe

Conference Session

Automation in Manufacturing

Collection

2018 ASEE Annual Conference & Exposition

Authors

Sheng-Jen Hsieh, Texas A&M University; Qinbo Li

Tagged Divisions

Manufacturing

Rockwell Automation laboratory at Texas A&M University, a state-of-the-art facility for education and research in the areas of automation, control, and automated system integration.Qinbo Li c American Society for Engineering Education, 2018 Lessons Learned from an Intelligent Tutoring System for Computer Numerical Control Programming (CNC Tutor)Advances in CAD/CAM software and CNC machining have made the transition of design andmachining seamless. Once a part is designed in a CAD format and a user specifies the machinetool needed for each machining pass, the CAD/CAM software can generate the G-code and theG-code can be fed into the CNC machine directly without any delay. There is no

Conference Session

Energy Conversion and Conservation Division Technical Session on Solar

Collection

2018 ASEE Annual Conference & Exposition

Authors

William Hutzel, Purdue University, West Lafayette; Jan T. Lugowski, Purdue University, West Lafayette

Tagged Divisions

Energy Conversion and Conservation

: Renewable andSustainable Energy Reviews, vol. 20, April 2013, pp. 443-61.[8] G. Barbose & N. Darghouth (2016). Tracking the Sun IV. Lawrence Berkeley National Laboratory.[9] National Electric Code, 2014 Edition, Article 690 Solar Photovoltaic (PV) Systems, [Online]. Available:http://www.energy.gov.bb/web/component/docman/doc_download/71-article-690-solar-photovoltaic-pv-systems.[Accessed Feb. 4, 2018].[10] T. Buonassisi, “PV Efficiency: Measurement & Theoretical Limits,” Lecture 14 – 10/27/2011. [Online].Available: MIT Open Courseware: https://ocw.mit.edu/courses/mechanical-engineering/2-627-fundamentals-of-photovoltaics-fall-2013/lecture-videos-slides/MIT2_627F13_lec14.pdf. [Accessed Feb. 4, 2018].

Conference Session

Ocean and Marine Division Technical Session 2

Collection

2019 ASEE Annual Conference & Exposition

Authors

Mysore Narayanan, Miami University

Tagged Divisions

Ocean and Marine

opinion that education in a new learning paradigm willbetter prepare students for the work ahead of them. Whether it be performance arts liketheatre and music, or be it a laboratory setting like physics or biology, studentperformance can be effectively accentuated by adopting creative instructional lessonplans. Furthermore, many of our educational institutions have tried to move away fromemphasizing the establishment of a strong knowledge-base. In this paper the authordiscusses two models that he has successfully utilized for accentuating studentperformance. The first is identified as Concept Mapping Model and the second inidentified as Structured Content Model. These two models are of particular interest to Ocean Engineering Courses

Conference Session

NSF Grantees Poster Session

Collection

2019 ASEE Annual Conference & Exposition

Authors

Melissa Lynn Morris, West Virginia University; Robin A. M. Hensel, West Virginia University; Joseph Dygert, West Virginia University

Tagged Topics

Diversity, NSF Grantees Poster Session

Director of the Center for Building Energy Efficiency. She has previously taught courses such as Thermodynamics, Thermal Fluids Laboratory, and Guided Missiles Systems, as well as serving as a Senior Design Project Advisor for Mechanical Engineering Students. Her research interests include energy and thermodynamic related topics. Since 2007 she has been actively involved in recruiting and outreach for the Statler College, as part of this involvement Dr. Morris frequently makes presentations to groups of K-12 students, as well as perspective WVU students and their families. Dr. Morris was selected as a Statler College Outstanding Teacher for 2012, the WVU Honors College John R. Williams Outstanding Teacher for 2012, and

Conference Session

NSF Grantees Poster Session

Collection

2019 ASEE Annual Conference & Exposition

Authors

Matthew W. Ohland, Purdue University-Main Campus, West Lafayette (College of Engineering); Misty L. Loughry, Rollins College, Crummer Graduate School of Business; David Jonathan Woehr, University of North Carolina Charlotte; Daniel M. Ferguson, Purdue University-Main Campus, West Lafayette (College of Engineering); Catherine E. Brawner, Research Triangle Educational Consultants; Behzad Beigpourian, Purdue University; Frank Luchini; Siqing Wei, Purdue University-Main Campus, West Lafayette (College of Engineering)

Tagged Topics

NSF Grantees Poster Session

at The University of North Carolina at Charlotte. He received his Ph.D. in Industrial/Organizational Psychology from the Georgia Institute of Technology in 1989. Dr. Woehr served on the faculty of the Psychology Department in the I/O Psychology program at Texas A&M University from 1988 to 1999 and as a Professor of Man- agement at the University of Tennessee from 1999 to 2011. He has also served as a Visiting Scientist to the Air Force Human Resource Laboratory and as a consultant to private industry. Dr. Woehr is a fellow of the Society for Industrial and Organizational Psychology (SIOP), the American Psychological Associa- tion (APA), and the Association for Psychological Science (APS). His research on

Conference Session

College-Industry Partnerships Division Poster Session

Collection

2018 ASEE Annual Conference & Exposition

Authors

McKenzie Caroline Lawry, Lipscomb University

Tagged Divisions

College Industry Partnerships

college, we continued our collaboration to realize the dream of the Dean toutilize the building and building systems as a practical teaching tool for faculty and students.Representatives from Trane and the engineering faculty met to brainstorm on ways we could utilize thebuilding as a teaching tool – we primarily expanded on existing lab experiments already in the curriculumto develop new laboratory experiments using instrumentation added to the new building’s hydronic systemas well as a dedicated heat pump system in the Thermal-Fluids lab with high-level instrumentation. Thisallowed for lab exercises calculating heat transfer, air flow, thermodynamics, hydronics, efficiencies, etc.The resulting lab curriculum benefits students insomuch as it

Conference Session

College Industry Partnerships Division Technical Session 2

Collection

2018 ASEE Annual Conference & Exposition

Authors

R. Andrew Schaffer, Purdue Polytechnic Institute; John Carlson, Red Gold

Tagged Topics

Diversity

Tagged Divisions

College Industry Partnerships

thanone MDT plan of study, or have variants of a single plan.- Upon completion of the proposed plan of study, that draft plan is submitted to the MDTCurriculum Advisory Committee for review, audit of requirements, and a vote to approve theplan for the company -- or to revise and resubmit.- Industry partners who desire stackable certificates, or micro-credentialing, will identify thosecurricular subsets after the B.S. plan of study is fully approved.Example Degree Subject/Course RequirementsPurdue University CorePurdue University has core, minimum subject requirements, common to all Purdue degrees,which are required and included in all BS-MDT plans of study:English compositionSpeech communicationMath/quantitative reasoningScience and laboratory

Conference Session

Works in Progress I

Collection

2018 ASEE Annual Conference & Exposition

Authors

Dong San Choi, University of Illinois, Urbana-Champaign; Michael C. Loui, Purdue University, West Lafayette (College of Engineering)

Tagged Divisions

Educational Research and Methods

-regulated learning, self-efficacy,and general well-being [5]. In our study, we explored whether we could help students persist inengineering by encouraging such positive learning dispositions and behaviors.In this work-in-progress paper, we report preliminary results from a one-credit course called“Engineering the Mind.” We used design-based research and the Transtheoretical Model (TTM)of Health Behavior Change to design the course and assess the outcomes. The goal of the coursewas to encourage students to adopt positive learning dispositions and behaviors by teaching themhow the brain works.BackgroundDesign-based research (DBR) is a research method that evaluates theory-based interventions(that were developed in laboratory conditions) in complex

Conference Session

Track: Collegiate - Technical Session 4

Collection

2019 CoNECD - The Collaborative Network for Engineering and Computing Diversity

Authors

Kristina Rigden, California State Polytechnic University, Pomona; Nicole Gutzke, California State Polytechnic University, Pomona

Tagged Topics

Collegiate, Diversity

female engineering students, engineering faculty, alumni,and industry representatives. CPP WE Open House is an annual event for admitted students, held in conjunction withEngineering Scholar’s Day to encourage more young women to make the decision to enroll inthe College of Engineering. Students meet the College of Engineering staff and faculty, take acampus or College of Engineering laboratory tour, and attend an engineering club fair. Each semester, a WE Chat is held. A WE Chat provides the opportunity for femalefaculty and students to connect and learn about each other. The program provides femalestudents in the College of Engineering an opportunity to have lunch with female faculty fromtheir respective departments. Faculty

Conference Session

PSW Section Meeting Papers - Disregard start and end time - for online paper access only

Collection

2019 Pacific Southwest Section Meeting

Authors

Forrest Mobley, Embry - Riddle Aeronautical University; Shigeo Hayashibara, Embry-Riddle Aeronautical University, Prescott

Tagged Topics

Pacific Southwest Section Meeting Paper Submissions

National Laboratory: https://computing.llnl.gov/tutorials/parallel_comp/2: Dongarra, J., Strohmaier, E., Simon, H., & Meuer, M. (2019, January 14). November 2018. Retrieved from Top500: https://www.top500.org/lists/2018/11/3: U.S. Department of Energy. (2017, May 23). FY 2018 Congressional Budget Justification. Retrieved from Energy.gov: https://science.energy.gov/~/media/budget/pdf/sc-budget-request-to-congress/fy- 2018/FY_2018_SC_ASCR_Cong_Budget.pdf4: Dongarra, J. (2016, June 24). Report on the Sunway TaihuLight System. Retrieved from netlib.org: http://www.netlib.org/utk/people/JackDongarra/PAPERS/sunway-report-2016.pdf5: newegg.com. (2019, February 12). Kingston A400 2.5" 120GB SATA III TLC Internal Solid

Collection

2019 ERC

Authors

Dawn Tilbury; Joanne Tornow; Jim Kurose; Anne Kinney

• Computation and data science • High-throughput synthesis / characterization / processing • Quantum materials Issued • Hybrid / composite materials February 2019 • Advanced manufacturing 36 Designing Materials to Revolutionize and Engineer our Future (DMREF)NSF’s response to MGI • Collaboration with federal laboratories and industry • Coordination with federal agencies: AFOSR, NIST, DOE • Strong focus on workforce development • Central role of data in MGI Example Collaborations: MPS/CHE

Conference Session

Women in Engineering Division Technical Session 5

Collection

2019 ASEE Annual Conference & Exposition

Authors

Bradley Joseph Priem, Northeastern University; Caroline Ghio, Northeastern University; Hannah Boyce, Northeastern University; Sydney Anne Morris, Northeastern University; Emma Kaeli, Stanford University; Tyler Byrne Cole, Northeastern University; Paul A. DiMilla, Northeastern University; Rachelle Reisberg, Northeastern University

Tagged Topics

Diversity

Tagged Divisions

Women in Engineering

Paper ID #25901A Longitudinal Study of the Effects of Pre-College Preparation and Use ofSupplemental Instruction during the First Year on GPA and Retention forWomen in EngineeringMr. Bradley Joseph Priem, Northeastern University Bradley Priem is a fourth year undergraduate student at Northeastern University, majoring in chemical en- gineering and minoring in biochemical engineering. He has been involved in the Connections Chemistry Review program for three years. He has also held an undergraduate research position in a biomaterials laboratory on campus. He has completed two co-ops in the biotech industry, and is currently

Conference Session

Computers in Education Division Technical Session 4: Digital Learning Part II

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Ronald J. Hayne, The Citadel

Tagged Divisions

Computers in Education

laboratories. c American Society for Engineering Education, 2020 Implementing Serial Communication for the Instructional ProcessorAbstractAn Instructional Processor has been developed for use as a design example in an AdvancedDigital Systems course. The architecture is modelled in VHDL and can be simulated usingXilinx design tools to demonstrate operation of the processor. A basic microcontroller is thencreated by adding memory-mapped input/output (I/O). The system can be synthesized andimplemented in hardware on a field programmable gate array (FPGA). The goal of this projectwas to add serial communication capabilities to the Instructional Processor via software andhardware. The enhanced microcontroller can then be

Conference Session

Teaching Interventions in Biomedical Engineering (Works in Progress) - June 22nd

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Arash Mahboobin, University of Pittsburgh; David V.P. Sanchez, University of Pittsburgh

Tagged Divisions

Biomedical Engineering

. Engineering education research includes curriculum and laboratory development of biomechanics and bio-signal processing concepts.Dr. David V.P. Sanchez, University of Pittsburgh David Sanchez is an Assistant Professor in the Department of Civil & Environmental Engineering and the Assistant Director for the Mascaro Center for Sustainable Innovation. His research is focused on fus- ing sustainability principles and design thinking to address the Water and Energy grand challenges in the natural and built environment. Current projects include: Renewable electrode materials for Bioelectro- chemical systems, Recirculating Aquaponic Systems, Environmental Quality wireless sensor networks, and incorporating Sustainable Design

Conference Session

Cooperative and Experiential Education Division Technical Session 1 - Skill and Competency Development through the Co-op Experience

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Lindsay Corneal, Grand Valley State University; Wendy S. Reffeor, Grand Valley State University; Christopher P. Pung P.E., Grand Valley State University

Tagged Divisions

Cooperative and Experiential Education

development testing. During the early development stages, customer doors are notavailable, thus a surrogate fixture that can hold the outside mirror and simulate a door slam eventis needed. Currently door slam requirements are a subjective test looking for buzz, squeaks,rattles. The development of a laboratory fixture would allow a more repeatable method to controldoor acceleration and potentially make a more quantifiable method.” Students are currentlyworking on an inertia simulator for door handles. This project was proposed by a mechanicalengineering student and is being completed by two mechanical, two product design andmanufacturing and one electrical engineering student.Although the co-op two technical writing assignment has not yielded high

Conference Session

ET Pedagogy III

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Sonia Travaglini, Stanford University; Sheri Sheppard, Stanford University; Helen L. Chen, Stanford University

Tagged Topics

Diversity

Tagged Divisions

Engineering Technology

interaction (a conceptual knowledge competency), and within Mechanical Engineeringthe method was used to build mastery of experimental testing (a practical skill competency).4.2 – SEEF activities to move forward an agenda of active learning in experimentalcourses—a course designed around active learning.Example 1: A SEEF being the lead in course design – With the support of the MechanicalEngineering Undergraduate Curriculum Committee, Professor Sheri Sheppard, the members ofthe Designing Education Laboratory, Scott Crawford, and Lester Su, a key focus for the SEEFwas developing the ME2: Experimental Problem Solving for Engineers. In the Department ofMechanical Engineering, the need to master a wide range of math-heavy topics common to alldegree

Conference Session

Community Engagement Division Technical Session 1

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Ajay P. Malshe, Purdue University; Kevin M Fitzpatrick, University of Arkansas; Salil Bapat, Purdue University

Tagged Divisions

Community Engagement Division

Paper ID #30233Engagement in Practice: Learning Applications of MSE for Design ofCommunity Based Shelter for Housing InsecurityDr. Ajay P. Malshe, Purdue University Dr. Malshe is a R. Eugene and Susie E. Goodson Distinguished Professor of Mechanical Engineering and the Director of the Materials and Manufacturing Research Laboratory (MMRL), Purdue University. His fields of academic and industrial interest are advanced manufacturing, food-shelter-clothing and re- lated life insecurities, bio-inspired materials and designing and system integration. He has overlapping 24 years of academic plus overlapping 15 years of

Conference Session

Engineering Design Graphics Division Technical Session 4

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Nandita Biswas, Washington State University; David Torick, Washington State University

Tagged Divisions

Engineering Design Graphics

. Hale, S. Freyne, Teaching Aids and Laboratory Experiments toEnhance Materials Learning, Proceedings of the 2007 Midwest Section Conference of theAmerican Society for Engineering Education, Wichita, KS, Sep. 19-21, 2007.[9] A. M. Barry, D. Berry, S. Cunningham, J. Newton, M. Schweppe, A. Spalter, W. Whiteley,R. Williams, Visual Learning for Science and Engineering. A visual Learning Campfire,Snowbird, Utah, June 1-4, 2002.[10] G.R. Chalageri, G.U, Raju, Teaching Reform through Model building in Theory of MachineCourse, Proceedings of the International Conference on Transformations in EngineeringEducation, ICTIEE, 2014.[11] S. Rasul, Q. Bukhsh, S. Batool, “A study to analyze the effectiveness of audio visual aids inteaching learning process at a

Conference Session

Pre-college Engineering Education Division Technical Session 5

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Shramana Ghosh, New York University; Pooneh Sabouri, New York University; Vikram Kapila, New York University

Tagged Divisions

Pre-College Engineering Education

University, where she studies teachers’ experiences as they learn about robotics, how they envision incorporating robotics in their curriculum and challenges that they face.Dr. Vikram Kapila, NYU’s Tandon School of Engineering Vikram Kapila is a Professor of Mechanical Engineering at NYU Tandon School of Engineering (NYU Tandon), where he directs a Mechatronics, Controls, and Robotics Laboratory, a Research Experience for Teachers Site in Mechatronics and Entrepreneurship, a DR K-12 research project, and an ITEST re- search project, all funded by NSF. He has held visiting positions with the Air Force Research Laboratories in Dayton, OH. His research interests include K-12 STEM education, mechatronics, robotics, and con

Conference Session

ET Pedagogy I

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Hazem Tawfik, State University of New York; Yeong Ryu, State University of New York

Tagged Topics

Diversity

Tagged Divisions

Engineering Technology

Paper ID #30318EXPERIMENTAL TESTING OF THE PROTON EXCHANGE MEMBRANE(PEM) HYDROGEN FUELCELL PERFORMANCE WITH NANO-GRAPHENE OXIDEDr. Hazem Tawfik P.E., State University of New York, College of Technology at Farmingdale Prof. Tawfik obtained his Ph.D. in Mechanical Engineering, from University of Waterloo, Ontario, Canada. He has held a number of industrial & academic positions and affiliations with organizations that included Brookhaven National Laboratory (BNL), Rensselaer Polytechnic Institute (RPI), Stony Brook University (SBU), Massachusetts Institute of Technology (MIT), Atomic Energy of Canada Inc., Ontario Hydro

Conference Session

Assessing, Expanding, and Innovating Information Literacy

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Erin Rowley, University at Buffalo; Lauren Kuryloski, University at Buffalo; Kristen Moore, University at Buffalo

Tagged Divisions

Engineering Libraries

Paper ID #30249Extending the Role of the Library and Librarian: Integrating AlternativeInformation Literacy into the Engineering CurriculumMs. Erin Rowley, University at Buffalo, SUNY Erin Rowley is the Head of Science and Engineering Library Services at the University at Buffalo and serves as the Engineering Librarian. Before coming to UB, Erin was the head of a research team at a consumer products testing laboratory specializing in international standards and regulatory research. At UB she assists faculty, students, and staff with library resource instruction and engineering-related research including standards, technical