Conference Session

First-year Programs Division Poster Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

Chitra Javdekar, Massachusetts Bay Community College, Wellesley Hills MA 02481; Stephen W. McKnight, Northeastern University; Michael E. Pelletier, Northern Essex Community College

Tagged Divisions

First-Year Programs

opportunities to solve engineeringproblems in a laboratory with sophisticated engineering tools and thus develop an appreciationfor the engineering profession. The contact of community college engineering students with theengineering profession is often even more meager.Engineering programs at two-year institutionsNearly forty percent of engineers who graduated between 1999-2000 attended a communitycollege at some point during their studies[7]. Despite this broad contribution of communitycolleges in our engineering education system, the equipment and financial resources available tothese two-year undergraduate institutions remain considerably less than that of their four yearinstitution counterparts. In addition, due to the lack of resources or time

Conference Session

Computational Tools

Collection

2011 ASEE Annual Conference & Exposition

Authors

Abhijit Nagchaudhuri, University of Maryland, Eastern Shore

Tagged Divisions

Computers in Education

AC 2011-381: REAL-TIME CONTROL IMPLEMENTATION OF SIMPLEMECHATRONIC DEVICES USING MATLAB/SIMULINK/RTW PLATFORMAbhijit Nagchaudhuri, University of Maryland, Eastern Shore Abhijit Nagchaudhuri is a Professor in the Department of Engineering and Aviation Sciences at University of Maryland Eastern Shore. Dr. Nagchaudhuri is a member of ASME and ASEE professional societies and is actively involved in teaching and research in the fields of engineering mechanics, robotics, systems and control, design of mechanical and mechatronic systems, precision agriculture and remote sensing. Dr. Nagchaudhuri received his bachelors degree from Jadavpur University in Calcutta, India with a honors in Mechanical Engineering in 1983

Conference Session

Certifying Teachers in Engineering or Integrated STEM

Collection

2011 ASEE Annual Conference & Exposition

Authors

AnnMarie Thomas, University of Saint Thomas; Jan B Hansen, University of Saint Thomas; Sarah H. Cohn, Science Museum of Minnesota; Brian Phillip Jensen, University of St. Thomas

Tagged Divisions

K-12 & Pre-College Engineering

AC 2011-1334: DEVELOPMENT AND ASSESSMENT OF AN ENGINEER-ING COURSE FOR IN-SERVICE AND PRE-SERVICE K-12 TEACHERSAnnMarie Thomas, University of Saint Thomas AnnMarie Thomas is an assistant professor of Engineering at the University of St. Thomas, and co- director of the UST Center for Pre-Collegiate Engineering Education. Her teaching and research focus on Engineering Design and K-12 Engineering Education. Prior to her appointment at UST, she was a faculty member at Art Center College of Design.Jan B. Hansen, Ph.D., University of Saint Thomas Jan B. Hansen is co-director of the Center for Pre-Collegiate Engineering Education at the University of St. Thomas. Her current interests as an educational psychologist focus on

Conference Session

NSF Grantees Poster Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

Santosh Devasia, University of Washington; Jim L. Borgford-Parnell, University of Washington; Jae-Hyun Chung, University of Washington; Jiangyu Li, University of Washington; Amy Shen, University of Washington; Nathan Sniadecki, University of Washington; Junlan Wang, University of Washington

Tagged Topics

NSF Grantees

Borgford-Parnell, University of Washington Dr. Jim Borgford-Parnell is Assistant Director and instructional consultant for the Center for Engineering Learning & Teaching at the University of Washington. He taught design drawing, and theory, research methods, educational theory, and adult and higher education pedagogy courses for over 25 years. Jim has been involved in instructional development more than ten years, and currently does both research and instructional development in engineering education.Jae-Hyun Chung, University of Washington Jae-Hyun Chung is McMinn Endowed Assistant Professor in the Department of Mechanical Engineering at University of Washington. Dr. Chung received his B.S. in 1995 and M.S. in 1997

Conference Session

Poster Sessions for Unit Operations Lab Bazaar and Tenure-Track Faculty

Collection

2011 ASEE Annual Conference & Exposition

Authors

Laura Coon, Washington State University; Paul B. Golter, Washington State University; Derek Allen Cline, Washington State University; David B. Thiessen, Washington State University; Bernard J. Van Wie, Washington State University

Tagged Divisions

Chemical Engineering

engineers. Advances have been made to this end 1, 2, 3, 4, 5, 6, in applyingCooperative, Hands-on, Active and Problem based Learning, more commonly referred to as theCHAPL pedagogy, 7 in the form of both teaching methods, applied experiments, and equipment.It has been shown that when physical teaching aids and real life examples are employed ineducation, the student more often thinks outside the scope of the course and retains the essentialknowledge for later application 8, 9 which is why access to a Unit Operations Laboratory isessential to a well rounded education in engineering. In this paper we will be focusingspecifically on the advances made in heat transfer and fluid flow education in the form ofminiaturized industrial equipment.Even though

Conference Session

WIED Poster Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

Mara R. London, Gonzaga University; Jillian Rae Cadwell, Gonzaga University; Alexander Maxwell, Clarkson University

Tagged Divisions

Women in Engineering

-focused projects and educational opportunities.  Existing collegial relationship with local community leaders and decision makers.  Ample teaching and housing facilities.Initial Pilot ProjectAs establishment of a permanent program continues, a pilot water treatment project atChimfunshi has been incorporated into senior design curriculum. Currently, communitymembers use an undesirable bacteria-laden surface water source, rather than a chemically andbiologically safe ground water source located nearby6. This is due to the unpleasant aesthetics(color, taste) and reddish/orange staining caused by high concentrations of iron in the groundwater. Students are currently conducting laboratory experiments and developing community- andhousehold

Conference Session

Developing Young MINDS in Engineering, Part II

Collection

2011 ASEE Annual Conference & Exposition

Authors

G. Padmanabhan, North Dakota State University; Carol Davis, North Dakota EPSCoR

Tagged Divisions

Minorities in Engineering

from passiveto active learning, enhanced research and laboratory skills, and increased understanding andinterest in the discipline are some of the benefits undergraduate students gain by engaging inresearch. Therefore, “engaging the students in research” is adopted here as a major strategy toimprove their retention in STEM programs. Faculty involvement in research mentoring not onlyleads to their enrichment as teachers but also enriches them as scholars. Though theresponsibility of the tribal college (TC) faculty is primarily teaching, engaging in research anddeveloping research project situations for students, research provides them opportunities toenhance their teaching capability and professional development. In this collaborative model

Conference Session

Qualitative Research Programs & International Research Experience from Around the World

Collection

2011 ASEE Annual Conference & Exposition

Authors

Xia Wang, Oakland University; Laila Guessous, Oakland University; Gary Barber, Oakland University; Qian Zou, Oakland University; Michael A. Latcha, Oakland University; Li Jia, Beijing Jiaotong University; Zhuqian Zhang, Beijing Jiaotong University

Tagged Divisions

International

AC 2011-1667: INTERNATIONAL RESEARCH EXPERIENCE FOR EN-GINEERING STUDENTS IN CHINA IN THE AREA OF FUEL CELLSXia Wang, Oakland University XIA WANG (wang@oakland.edu) is an assistant professor in the department of MechanicalEngineering at Oakland University. Her research and teaching interests lie in the areas of fluidmechanics and heat transfer, with an emphasis on fuel cell technology. She is program director of the NSF IRES program at Oakland University.Laila Guessous, Oakland University Laila Guessous, Ph.D. is an associate professor in the department of mechanical engineering at Oakland University (OU) in Rochester, MI. Her research and teaching interests lie in the areas of fluid mechanics and heat transfer

Conference Session

Project-Based Education in Energy Curriculum

Collection

2011 ASEE Annual Conference & Exposition

Authors

Herbert L. Hess, University of Idaho

Tagged Divisions

Energy Conversion and Conservation

system. Specificationand installation of the hydroelectric system, replacing an again incumbent and upgrading a watercollection system. Specification and installation of 4.3kW photovoltaic panels and controller.Interconnection to fossil fuel / biofuel generator. Inverter and energy storage description. Gridinterconnection to load, including all electrical interconnection, construction of an appropriatepower house, and buried cabling to nine-cabin and research laboratory load. This project wasmanaged as a teaching opportunity in accordance with a successful model proposed by Klein et.al. Professor and students presented the keys to the caretaker on 23 July 2010.IntroductionAn integrated electric power system has been designed for and installed in

Conference Session

FPD VII: Innovative Curriculum Elements of Successful First-Year Courses

Collection

2011 ASEE Annual Conference & Exposition

Authors

Barbara Elizabeth Carruthers, The Ohio State University; Paul Alan Clingan, The Ohio State University - EEIC

Tagged Divisions

First-Year Programs

AC 2011-1957: USE OF FLUENT SOFTWARE IN A FIRST-YEAR ENGI-NEERING MICROFLUIDIC DESIGN COURSEBarbara Elizabeth Carruthers, The Ohio State University Barbara E. Carruthers is a Mechanical Engineering graduate student at The Ohio State University and a Graduate Teaching Assistant for the OSU Fundamentals of Engineering for Honors (FEH) Program. Ms. Carruthers with graduate with her M.S.M.E. from Ohio State in 2012.Paul Alan Clingan, The Ohio State University - EEIC Lecturer - First Year Engineering Program Engineering Education and Innovation Center The Ohio State University MS - Chemical Engineering - Bucknell University - 1988 BS - Chemical Engineering - Buck- nell University - 1986

Conference Session

Study Abroad, International Exchange Programs, and Student Engagements

Collection

2011 ASEE Annual Conference & Exposition

Authors

Donal McHale, Dublin Institute of Technology; Gül E. Okudan Kremer, Pennsylvania State University, University Park; Michael J. Dyrenfurth, Purdue University, West Lafayette; Brian Bowe, Dublin Institute of Technology

Tagged Divisions

International

.Did these transatlantic exchange students believe that the teaching styles encountered abroad were more effective in supporting learning than those at home? 4.What changes in style (at home and “study abroad” institution) do they believe could be adopted as a result of their experience?In the case of theme two, as an output of the semi-structured interviews, five important“course related” variables emerged as being of interest and worth exploring further. Thesevariables were: a. The amount of course related “homework” typically employed. b.The amount of “self directed learning” undertaken. c. The extent of the credit weighting for “continuous assessment”. d.The degree of enforcement of attendance at lectures and laboratories. e. The

Conference Session

Electrical and Computer Engineering Technology Projects and Applications

Collection

2011 ASEE Annual Conference & Exposition

Authors

John Marshall, University of Southern Maine

Tagged Divisions

Engineering Technology

which can briefly be described as a study of the fundamental concepts,devices, and applications of electronic components and controllers utilized on industrialequipment. Laboratory sessions focus on instrumentation, programming, downloading,and wiring discrete input / output devices.Specific Course Competencies of the course include the ability to: 1. Identify major applications of programmable logic controllers in industry, transportation, construction, and environmental control. 2. Identify, discuss, and describe the purpose and function of the primary components utilized in open and closed loop process control systems. To assist in this outcome, each student will develop an

Conference Session

Student Learning and Assessment I

Collection

2011 ASEE Annual Conference & Exposition

Authors

Donald Wroblewski, Boston University

Tagged Divisions

Mechanical Engineering

AC 2011-283: HERDING CATS: WEAVING COHERENT APPLICATIONTHREADS THROUGH A MECHANICAL ENGINEERING CURRICULUMTO FACILITATE COURSE-TO-COURSE CONNECTIVITY AND IMPROVEMATERIAL RETENTIONDonald Wroblewski, Boston University Don Wroblewski is an Associate Professor in the Mechanical Engineering Department at Boston Univer- sity, and has been the Associate Chair of Undergraduate Aerospace Studies since 1998. He is a two-time winner of the department award for Excellence in Teaching and one of two inaugural winners of the College of Engineering’s Innovative Engineering Education Fellow award. He has been active in both curriculum and course innovations. He has developed 7 new courses including an on-line Mechanics course and

Conference Session

Professional Development from a Distance

Collection

2011 ASEE Annual Conference & Exposition

Authors

Deborah L. Helman, University of Wisconsin, Madison; Ryan J. Kershner, University of Wisconsin, Madison; Diana Wheeler, MA-LIS, University of Wisconsin, Madison; Amy L. Kindschi, University of Wisconsin, Madison; Steven M. Cramer, University of Wisconsin, Madison; Sandra Shaw Courter, University of Wisconsin, Madison; Moira Lafayette, University of Wisconsin, Madison

Tagged Divisions

Continuing Professional Development

team of educational and learning technology professionals (e.g. GeorgiaTech’s Center for the Enhancement of Teaching and Learning (CETL) and the Stanford Centerfor Teaching and Learning (CTL)). Some, like CETL, were more formal organizations within theinstitution, while others, like the Dartmouth Center for the Advancement of Learning (DCAL)and the MIT Teaching and Learning Laboratory (TLL), were similar to research centers. Theresearch model couples dedicated staff with representatives from other departments withinthe institution, drawing from the faculty, the library, and academic computing. Both modelsprovided good examples of staffing structures and service profiles.The “learning commons” model that brings together academic support

Conference Session

First-year Programs Division Poster Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

Lisa A. Pruitt, University of California, Berkeley

Tagged Divisions

First-Year Programs

. Medical implant analysis for structure- function-performance is performed to optimize device design. Biomechanical characterization of tissues is performed to assess clinical treatments and to develop constitutive relationships. Laboratory techniques for structural characterization include SEM, TEM, FEM, SAXS, USAXS, XPS, DSC, GPC, FTIR, AFM, confocal microscopy, wear testing, fatigue testing, fracture mechanics analysis, and nanoindentation. Re- search supported by NIH, NSF, ONR, DARPA, OREF and the medical device industry. Pedagogical experience includes curriculum development in mechanical engineering and bioengineering. Teaching experience includes undergraduate courses on Mechanical Behavior and Processing of

Conference Session

Multimedia and Distance Learning

Collection

2011 ASEE Annual Conference & Exposition

Authors

Ronald H. Rockland, New Jersey Institute of Technology; Howard S. Kimmel, New Jersey Institute of Technology; John D. Carpinelli, New Jersey Institute of Technology

Tagged Divisions

Engineering Technology

Jersey Institute of Technology. He has served as coordinator of activities at NJIT for the Gateway Engineering Education Coalition and as a member of the Coalition’s Governing Board. He previously chaired NJIT’s Excellence in Teaching Awards Committee and is past chair of the University Master Teacher Committee. Page 22.1078.1 c American Society for Engineering Education, 2011 Moodle as a Course Management System – It isn’t just for Distance LearningAbstractMoodle, WebCT, Blackboard and Sakai are examples of course management systems that havebeen

Conference Session

Interdisciplinary Education in Engineering Technology

Collection

2011 ASEE Annual Conference & Exposition

Authors

Joseph F. Kmec, Purdue University; Bryan J. Hubbard, Purdue University, West Lafayette; Martin A Lopez De Bertodano, Purdue University, West Lafayette; Benjamin Revis, Purdue University

Tagged Divisions

Engineering Technology

AC 2011-2818: THE ROLE OF THE COLLEGE OF TECHNOLOGY INTHE NUCLEAR INDUSTRYJoseph F. Kmec, Purdue University Joseph F. Kmec is currently Associate Professor in Mechanical Engineering Technology at Purdue Uni- versity, West Lafayette, IN. His teaching areas of concentration are energy-based and include Applied Thermodynamics, Internal Combustion Engines, Motorsports, and Power Plant Systems. His recent activ- ities involving student projects include engine simulation, power plant performance analysis, and nuclear technology. He may be reached at: kmecjf@purdue.edu.Dr. Bryan J Hubbard, Purdue University, West Lafayette Bryan Hubbard is an Assistant Professor in the Building Construction and Management (BCM) Program

Conference Session

Design in Freshman and Sophomore Courses

Collection

2011 ASEE Annual Conference & Exposition

Authors

Emre Selvi, Muskingum University; Sandra Soto-Caban, Muskingum University; Richard S. Taylor, Muskingum University; William R Wilson, Muskingum University

Tagged Divisions

Design in Engineering Education

goals became to apply and develop engineering designacross the curriculum. Starting by an introduction to engineering course in the first semester, ourcurriculum consists of design embedded courses each semester. However, that brings a challengeto us, engineering educators, to prevent this emphasis from shadowing the subject material ofeach course. Design work should not be a separate entity, but a contributory tool which can beused to support the teaching of the courses’ fundamentals1. Upper division courses are easier toincorporate design projects due to the knowledge levels and skills of the students. On the otherside, creating good design projects for lower division courses are more difficult because thestudents don’t have the analytical

Conference Session

To Boldly Go... Engineering Librarians Explore New Connections with Users

Collection

2011 ASEE Annual Conference & Exposition

Authors

Aleteia Greenwood, University of British Columbia; Eugene Barsky, University of British Columbia

Tagged Divisions

Engineering Libraries

beautiful friendship) whenyou share the seed of knowledge.References:1. Davis SF, McEntire JC, Sarakatsannis J. Fostering an interest in science in a typically underrepresentedpopulation. Journal of Food Science Education. 2007;6:14-16.2. Niemann MA, Miller ML, Davis T. The University of Alabama at Birmingham Center for CommunityOutReach development summer science institute program: A 3-yr laboratory research experience for inner-city secondary-level students. Cell Biology Education. 2004;3:162-180.3. Sticht TG, McDonald BA, Erickson PR, San Diego Consortium for Workforce Education and, LifelongLearning. Passports to paradise: The struggle to teach and to learn on the margins of adult education. 1998.Available from:http://search.ebscohost.com

Conference Session

Mentoring Graduate Students, Diversity, and Assessment

Collection

2011 ASEE Annual Conference & Exposition

Authors

Gregg L. Fiegel, California Polytechnic State University, San Luis Obispo; Ben Mason, University of California, Berkeley; Nicholas W. Trombetta, University of California, San Diego

Tagged Divisions

Graduate Studies, Minorities in Engineering

-structure interaction during earthquakes. Due to the scope of the project, graduatestudents are serving as the primary mentors to the undergraduates as they complete their researchappointments.In this paper, we describe our strategies and experiences in recruiting, training, advising, andmentoring undergraduate student researchers for this laboratory-based research project. We alsodiscuss the methods used to prepare the graduate students for their roles as research mentors.As part of this project, the principal investigators worked with the graduate students to provideadvice and training on topics such as teamwork, project management, communication, feedback,and student learning, which has helped to foster effective mentor-mentee relationships.We

Conference Session

Computational Tools

Collection

2011 ASEE Annual Conference & Exposition

Authors

Murat Tanyel, Geneva College

Tagged Divisions

Computers in Education

AC 2011-1464: PUTTING BELLS & WHISTLES ON DSP TOOLKIT OFLABVIEWMurat Tanyel, Geneva College Murat Tanyel is a professor of engineering at Geneva College. He teaches upper level electrical engineer- ing courses. Prior to teaching at Geneva College, Dr. Tanyel taught at Dordt College in Sioux Center, IA. He started his career at Drexel University where he worked for the Enhanced Educational Experience for Engineering Students (E4) project, setting up and teaching laboratory and hands-on computer exper- iments for engineering freshmen and sophomores. For one semester, he was also a visiting professor at the United Arab Emirates University in Al-Ain, UAE where he helped set up an innovative introductory

Conference Session

Curricular Developments in Energy Education I

Collection

2011 ASEE Annual Conference & Exposition

Authors

Robert W. Fletcher, Lawrence Technological University

Tagged Divisions

Energy Conversion and Conservation

, Michigan, and the Master of Science and Ph.D. degrees in Chem- ical Engineering focusing on Electrochemical Engineering, both from the University of Michigan, in Ann Arbor. He teaches a number of alternative energy courses and is leading LTU’s efforts to establish a full energy engineering program that addresses both alternative and renewable energy systems, as well as energy conservation and optimization of traditional energy systems. He also is the Director of the Alternative Energy program at Lawrence Tech. Page 22.100.1 c American Society for Engineering Education, 2011 A

Conference Session

Technology in the ECE Classroom

Collection

2011 ASEE Annual Conference & Exposition

Authors

Kenneth A. Connor, Rensselaer Polytechnic Institute; Frederick C Berry, Milwaukee School of Engineering; Mohamed F. Chouikha, Howard University; Dianna Newman, University at Albany/SUNY; Meghan Morris Deyoe, The Evaluation Consortium; Gavin Anaya; William Brubaker, Rensselaer Polytechnic Institute

Tagged Divisions

Electrical and Computer

exploration of science, technology, engineeringand mathematics (STEM) education principles, devices, and systems that have historically beenrestricted to expensive laboratory facilities. (For background on the need for and efficacy of thehands-on activities made possible by the Mobile Studio, please see references 1-9, 16, and 17.)While designed to provide the functionality of a typical electronics lab, it can be set up toperform a large variety of functions, measurements, system control, etc. through the use ofspecial purpose hardware and software, with many programming languages available for writingthe software.The project is now in refinement and beginning levels of dissemination. The Mobile Studio hasbeen used to teach courses in electrical

Conference Session

Green Renewable Energy and Engineering Technology

Collection

2011 ASEE Annual Conference & Exposition

Authors

Radian G. Belu, Drexel University; Irina Nicoleta Ciobanescu Husanu, Drexel University, Goodwin College of Professional Studies, Engineering Technology Program

Tagged Divisions

Engineering Technology

generation is more design-oriented, while the coverage of fuel cellpower generation is limited to fuel cell working principles, electrical characteristics, andapplications. As described in the previous section, the course also includes student term paperpresentations and projects. A summary of the topics covered in the course is given in Table 1.The course topics covered are discussed in the following subsections. The course structure,content and instructional approach, discussed in the next section of the paper are in part based onthe experience gained by one of the authors, when he was involved in the design, developmentand teaching of similar courses, as well as in the design, test and implement of the courseassociated laboratory and experiments

Conference Session

NSF Grantees Poster Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

Michael Kaye, Baltimore City Community College; Yun Liu, Baltimore City Community College

Tagged Topics

NSF Grantees

of Northern Virginia respectively. He holds a Bachelor of Science Degree in Mechanical Engineering from Huazhong University of Science and Technology in Wuhan, China. He has extensive experiences in teaching mathematics, engineering and robotics. Before his teach assignment at BCCC, he worked as a researcher and an engineer in power generation, energy and environmental protection fields. Page 22.452.1 c American Society for Engineering Education, 2011 Developing a Robotics Technology Curriculum at an Urban Community CollegeAbstract It is well recognized

Conference Session

Innovative College-Industry Partnerships for the Future

Collection

2011 ASEE Annual Conference & Exposition

Authors

Ana Elisa P. Goulart, Texas A&M University; Chris Corti, Ph.D., Cisco Systems, Inc.; Matthew Robert Hawkes, Cisco

Tagged Divisions

College Industry Partnerships

been working to build a VoIP telephone system in thetelecommunication laboratories – a new “VoIP initiative” 2. The idea is to use simple strategiesto adapt undergraduate laboratories on computer networks to the teaching of VoIP protocols.New laboratory experiments were created to introduce our junior-level undergraduate students to Page 22.21.3VoIP protocols, such as the session initiation protocol (SIP) and the real-time transport protocol(RTP).However, industry support is essential to the success of this VoIP initiative and the creation ofnew laboratories, in terms of industry - donating equipment, - funding student workers and

Conference Session

They're Not "Soft" Skills!

Collection

2011 ASEE Annual Conference & Exposition

Authors

Susan M. Lord, University of San Diego; Candice Stefanou, Bucknell University; Michael J. Prince, Bucknell University; John Chen, California Polytechnic State University; Jonathan D. Stolk, Franklin W. Olin College of Engineering

Tagged Divisions

Educational Research and Methods

Engineering project investigating persistence of women in engineering undergraduate programs. Dr. Lord’s industrial experience includes AT&T Bell Laboratories, General Motors Laboratories, NASA Goddard Space Flight Center, and SPAWAR Systems Center. She served as the President of the IEEE Education Society in 2009 and 2010.Candice Stefanou, Bucknell University Candice is an Associate Professor of Education at Bucknell University. Her teaching interests are in applied measurement and assessment and educational psychology. Her research interests are in motivation and classroom environments.Dr. Michael J. Prince, Bucknell UniversityJohn Chen, California Polytechnic State University John Chen is an Associate Professor

Conference Session

Innovations in Power Engineering Education

Collection

2011 ASEE Annual Conference & Exposition

Authors

Seyed Mousavinezhad, Idaho State University, (first, corresponding author)

Tagged Divisions

Electrical and Computer

facilities. In addition, there is a developingavailability of integrated and scaled systems to allow for teaching of energy systems concepts tomitigate cost and space requirements. Other means of cost mitigation include • Using local utilities as a resource for students to see/experience hardware systems; • Developing non-proprietary software for real-time simulation; • Developing regional facilities among a number of universities with virtual laboratory capabilities for remote access; • Developing shared “common space” for all departments interested in energy systems engineering.Industry Needs: ResearchDue to technological innovations, deregulation and other related issues, the electrical energyindustry is undergoing

Conference Session

Global Engineering Models: Curriculum Development, Improvements, and Partnerships

Collection

2011 ASEE Annual Conference & Exposition

Authors

Jian Yu, Auburn University and Tsinghua University, China; Chetan S. Sankar, Auburn University

Tagged Divisions

International

,content-integrating and interrelating and so on (Rieley & Crossley, 2000; Cole et al, 2000;Tan & Thoen, 2000; Bradley et al, 2007) . So, the teaching approach requires faculty tobelieve and affirm that every student can learn and model good practices that increaselearning. However, the traditional teaching approach cannot develop Higher Order CognitiveSkills (HOCS) and problem-solving skills that are needed in the work (Broussard et al., 2007;Mbarika, 2003). The mission of the Laboratory for Innovative Technology and Engineering Education(LITEE), created at Auburn University, is to bring real-world issues into classrooms, usingmultimedia case studies that illustrate in detail how an industrial problem is analyzed and asolution found

Conference Session

Active and Project-Based Learning

Collection

2011 ASEE Annual Conference & Exposition

Authors

Lynn Albers, North Carolina State University; Laura Bottomley, North Carolina State University

Tagged Divisions

Mechanical Engineering

Bottomley, North Carolina State University Laura Bottomley received a B.S. in Electrical Engineering in 1984 and an M.S. in Electrical Engineering in 1985 from Virginia Tech. She received her Ph D. in Electrical and Computer Engineering from North Carolina State University in 1992. Dr. Bottomley worked at AT&T Bell Laboratories as a member of technical staff in Transmission Sys- tems from 1985 to 1987, during which time she worked in ISDN standards, including representing Bell Labs on an ANSI standards committee for physical layer ISDN standards. She received an Exceptional Contribution Award for her work during this time. After receiving her Ph D., Dr. Bottomley worked as a faculty member at Duke University and