AC 2012-3239: USING MATLAB TO TEACH ELECTRIC ENERGY COURSESDr. Max Rabiee P.E., University of Cincinnati Max Rabiee earned his Ph.D. in electrical engineering from the University of Kentucky (U.K.) in 1987. He has taught electrical engineering and electrical engineering technology courses full-time and part-time for more than 30 years, and he is currently professor in the School of Electronic and Computing Sys- tems (SECS) in the College of Engineering and Applied Science (CEAS) at the University of Cincinnati (UC). Rabiee is a registered Professional Engineer (since 1988) and a Senior Member of the Institute of Electrical and Electronic Engineering (IEEE). He is also a member of the American Society of Engi
UNI Energy and Environment Council, CNS Diversity Committee, University Diversity Advisory Board, and Graduate College Diversity Task Force Committees. His research interests, grants, and publications are in the ar- eas of AC/DC Power System Interactions, distributed energy systems, power quality, and grid-connected renewable energy applications including solar and wind power systems. He is a Senior Member of IEEE, and member of ASEE, Tau Beta Pi National Engineering Honor Society, and ATMAE. Pecen was rec- ognized as an Honored Teacher/Researcher in ”Who’s Who among America’s Teachers” in 2004-2009. Pecen is a recipient of 2010 Diversity Matters Award at the University of Northern Iowa for his efforts on
- eas of AC/DC Power System Interactions, distributed energy systems, power quality, and grid-connected renewable energy applications including solar and wind power systems. He is a Senior Member of IEEE, and member of ASEE, Tau Beta Pi National Engineering Honor Society, and ATMAE. Pecen was rec- ognized as an Honored Teacher/Researcher in ”Who’s Who among America’s Teachers” in 2004-2009. Pecen is a recipient of 2010 Diversity Matters Award at the University of Northern Iowa for his efforts on promoting diversity and international education at UNI. He is also a recipient of 2011 UNI C.A.R.E Sustainability Award for the recognition of applied research and development of renewable energy appli- cations at UNI and
AC 2012-3108: EFFECTIVE LOW-BUDGET APPROACH TO TEACHINGPHOTOVOLTAIC SYSTEMS TO ELECTRICAL ENGINEERING TECH-NOLOGY STUDENTS AT COMMUNITY COLLEGESDr. Elena V. Brewer, Erie Community College Elena V. Brewer is an instructor of Electrical Engineering Technology at Erie Community College. She received her Ph.D. in physics from the State University of New York, Buffalo. Her teaching interests include photovoltaic systems, DC/AC circuit analysis, digital electronics, PLCs, electrical motors and controls, and college and technical physics.Anthony P. Dalessio, Erie Community College Anthony P. Dalessio is an Assistant Professor of electrical engineering technology at Erie Community College. He earned a B.S. and M.S. in
AC 2012-2999: PROJECT-BASED RENEWABLE ENERGY COURSE FORUNDERGRADUATE ENGINEERING STUDENTSDr. Kala Meah, York College of Pennsylvania Kala Meah received a B.Sc. degree from Bangladesh University of Engineering and Technology in 1998, a M.Sc. degree from South Dakota State University in 2003, and a Ph.D. degree from the University of Wyoming in 2007, all in electrical engineering. From 1998 to 2000, he worked for several power companies in Bangladesh. Currently, Meah is an Assistant Professor in the Electrical and Computer Engineering program, Department of Physical Sciences, York College of Pennsylvania, York, Penn., USA. His research interest includes electrical power, HVDC transmission, renewable energy, energy
AC 2012-5225: FUTURE ENERGY AND SMART GRIDDr. Ibraheem A. Kateeb, North Carolina A&T State University Ibraheem Kateeb received his B.S. in physics and mathematics from Yarmouk University in Jordan, M.S.E.E., and Ph.D. from NCA&TSU in North Carolina in electrical and computer engineering. He is a Senior Member of IEEE and Chairman of CNC-IEEE with more than 20 years of experience in academia and industry. He was professor and Department Head of electronics engineering at Guilford Technology College. He is currently at NCA&TSU as Assistant Professor of Electronics, Computer, and Information Technology. His current research is on electronic components, green energy and power, and control-robotics. He
AC 2012-3249: INDOOR SECURITY LIGHTING WITH SOLAR POW-ERED LED TECHNOLOGYDr. Faruk Yildiz, Sam Houston State UniversityMr. Keith L. Coogler, Sam Houston State University Keith L. Coogler is an instructor of industrial technology at Sam Houston State University. He received a B.S. in design and development and holds a M.A. in industrial education and is pursuing an Ed.D. in higher education from Texas A&M University, Commerce. His primary teaching area is construction management. Research interests include automation, electronics, alternative energy, and ”green” con- struction. Page 25.771.1
AC 2012-3758: SMALL-SCALE SMART GRID CONSTRUCTION ANDANALYSISMr. Nick J. Surface, University of Kansas Nick Surface is a British student studying in Kansas for a master;s degree in mechanical engineering. In 2007, he received his bachelor’s degree at City University London, followed by six months interning at BMW in Munich, Germany. His specific area of interest is automotive technology. The focus of his thesis is developing energy infrastructure for the purpose of charging electric vehicles and reducing reliance on fossil fuels.Mr. Bryan Anthony Strecker, University of Kansas Bryan Anthony Strecker has a B.S. in mechanical engineering, University of Kansas, and will have a M.S. in mechanical engineering
of Technology. He serves on UNI Energy and Environment Council, CNS Diversity Committee, University Diversity Advisory Board, and Graduate College Diversity Task Force Committees. His research interests, grants, and publications are in the ar- eas of AC/DC Power System Interactions, distributed energy systems, power quality, and grid-connected renewable energy applications including solar and wind power systems. He is a Senior Member of IEEE, and member of ASEE, Tau Beta Pi National Engineering Honor Society, and ATMAE. Pecen was rec- ognized as an Honored Teacher/Researcher in ”Who’s Who among America’s Teachers” in 2004-2009. Pecen is a recipient of 2010 Diversity Matters Award at the University of Northern Iowa
AC 2012-4605: INTEGRATING POWER ENGINEERING INTO MIDDLEAND HIGH SCHOOL MATH CURRICULUMSMr. Mark Vincent Abbott, University of Illinois, Urbana-Champaign Mark Abbott obtained his B.S. degree from the University of California, Davis, in biomedical engineering. He is now a graduate student at California State University, Los Angeles, studying electrical engineering. Abbott’s main interests are in power and systems engineering. His research involves improving efficiency of residential vertical axis wind turbines by developing a control algorithm for an adaptive, power sensing, and pulse-width-modulation (PWM) controller. As an IMPACT LA Fellow, Abbott works closely with teachers from LAUSD to develop hands-on
AC 2012-3487: MULTI-INSTITUTIONAL SMART GRID LABORATORYDr. Ilya Y. Grinberg, Buffalo State College Ilya Grinberg graduated from the L’viv Polytechnic Institute (L’viv, Ukraine) with an M.S in E.E. and earned a Ph.D. degree from the Moscow Institute of Civil Engineering (Moscow, Russia). He has more than 30 years of experience in design and consulting in the field of power distribution systems and design automation. He has over 36 published papers. Currently he is professor of engineering technology at Buffalo State College. His interests are in the field of electric power distribution systems analysis, design automation, and systems engineering.Prof. Mohammed Safiuddin, University at Buffalo, SUNY Mohammed
AC 2012-4093: ADDRESSING THE BROADER IMPACTS OF ENGINEER-ING THROUGH A GENERAL EDUCATION COURSE ON GLOBAL EN-ERGY ISSUESDr. Lawrence Holloway, University of Kentucky Lawrence Holloway is TVA Professor and Chair, Department of Electrical and Computer Engineering, and Director, Power and Energy Institute of Kentucky (PEIK), University of Kentucky. Page 25.132.1 c American Society for Engineering Education, 2012 Addressing the Broader Impacts of Engineering through a General Education Course on Global Energy IssuesAbstract:In Fall 2010, a course on Global Energy Issues was
AC 2012-4794: INCREASING STUDENT INVOLVEMENT IN A SUSTAIN-ABILITY COURSEDr. Brandon S. Field, University of Southern Indiana Brandon Field teaches in the thermal fluids area of mechanical engineering at the University of Southern Indiana, Evansville.Dr. Zane W. Mitchell Jr., University of Southern Indiana Page 25.767.1 c American Society for Engineering Education, 2012 Increasing Student Involvement in a Sustainability CourseAbstractStudent projects that have been included as part of an engineering course for the past two yearsare described in this paper. It is a new course, which is
AC 2012-3376: UTPA SOLAR SYSTEM EFFICIENCYMr. Leonel Aguilera, University of Texas, Pan American Leonel Aguilera earned his his B.S degree in electrical engineering from the Technology Institute of Saltillo, Coahuila, Mexico in 2006. He is currently a M.S. in electrical engineering student at the Univer- sity of Texas, Pan American, in Edinburg, Texas. He is an active researcher with interests in networking and renewable energy.Dr. Jaime Ramos P.E., University of Texas, Pan American Jaime Ramos, Assistant Professor, has been at The University of Texas Pan American since 2005, in the Department of Electrical Engineering. His research activities are directed towards the integration of renewable energy sources to
AC 2012-3196: TEACHING-AID DEVELOPMENT FOR ADVANCED EN-ERGY STORAGE SYSTEMSDr. Gene Yeau-Jian Liao, Wayne State University Y. Gene Liao is currently Director of the Electric Transportation Technology program and Associate Professor of Engineering Technology at Wayne State University. He received the B.S. in mechanical engineering from National Central University, Taiwan, a mechanical engineer degree from Columbia University, and a doctorate of engineering from the University of Michigan, Ann Arbor. He has more than 15 years of industrial practices in the automotive sector prior to becoming a faculty member. Liao has research and teaching interests in the areas of multi-body dynamics, hybrid vehicle powertrain
AC 2012-4999: NOVEL APPROACH TO CONDUCTING LABS IN AN IN-TRODUCTION TO THERMODYNAMICS COURSEProf. Teodora Rutar Shuman, Seattle University Teodora Rutar Shuman is an Associate Professor at Seattle University, Department of Mechanical Engi- neering. She received a B.S. in mechanical engineering from University of Belgrade, Yugoslavia, and a M.S. and a Ph.D. in mechanical engineering from the University of Washington. She pursues research in electro-mechanical systems for sustainable processing of microalgae. Email: teodora@seattleu.edu.Dr. Gregory Mason, Seattle University Page 25.981.1 c
AC 2012-4039: PYROLYTIC CONVERSION OF BIOMASS TO BIOCHAR,BIOCRUDE, AND ELECTRICITYDr. David H. Domermuth, Appalachian State University David Domermuth is a professor at Appalachian State University where he has been teaching for 22 years. His career began in metals manufacturing and has shifted to furniture and now industrial design. Domer- muth teaches the engineering aspects of product design. He has three degrees in mechanical engineering and has lived abroad for five years. His research focus is alternative energy, beginning with ocean geother- mal, and moving to biomass pyrolosis. His primary hobby is road biking with 30 years of riding in the Appalachian mountains
AC 2012-4683: DESIGNING AND BUILDING COMPETITIVE HYBRIDELECTRIC RACING VEHICLES AS A VALUED TEACHING AND LEARN-ING METHOD FOR UNDERGRADUATE ENGINEERING STUDENTS: ATWO-YEAR REVIEW WITH A PROJECTION OF FUTURE PLANSDr. Robert W. Fletcher, Lawrence Technological University Robert W. Fletcher joined the faculty of the Mechanical Engineering Department at Lawrence Techno- logical University in the summer of 2003, after several years of continuous industrial research, product development and manufacturing experience. Fletcher earned his bachelor’s of science degree in chemical engineering from the University of Washington, in Seattle, Wash., a master’s of engineering in manufac- turing systems from Lawrence Technological
AC 2012-3209: DEVELOPMENT OF SMALL WIND TURBINES FOR ISO-LATED COLONIA HOMES OF SOUTH TEXASDr. Kamal Sarkar, University of Texas, Pan American Kamal Sarkar completed his undergraduate degree in mechanical engineering from the Calcutta Univer- sity and graduate degree in materials science from the Indian Institute of Technology, Kanpur, India. After finishing his Ph.D. from the University of Tennessee, Knoxville, he joined the industry as a materials re- searcher. He has more than 20 years of diversified industrial experience using his experience in materials, computer visualization, and manufacturing. Presently, he is teaching in the Mechanical Engineering De- partment of the University of Texas, Pan American. His
AC 2012-3075: PROBLEM-BASED LEARNING IN THE TRAINING OFMIDDLE AND HIGH SCHOOL TEACHERS IN ALTERNATIVE ENERGYDr. Liping Guo, Northern Illinois University Liping Guo received a B.E. degree in automatic control from Beijing Institute of Technology, Beijing, China, in 1997, and M.S. and Ph.D. degrees in electrical and computer engineering from Auburn Univer- sity, Ala., USA, in 2001 and 2006 respectively. She is currently an Assistant Professor in the Electrical Engineering Technology program in the Department of Technology at the Northern Illinois University. Her research interests are mainly in the area of power electronics, renewable energy, embedded systems, and control. Guo is a member of the ASEE, a Senior Member
AC 2012-2997: TOOLS, TECHNIQUES AND CLASS EXPERIENCES WITHON-DEMAND MULTIMEDIA CONTENT IN AN ELECTRIC MACHINESCOURSEDr. Carl J. Spezia, Southern Illinois University, Carbondale Carl J. Spezia is an Associate Professor in the Electrical Engineering Technology program in the Depart- ment of Technology at Southern Illinois University, Carbondale (SIUC). He joined the program in1998 as a Visiting Assistant Professor. He worked as a power systems engineer for electric utilities for eight years prior to seeking a career in higher education. He is a licensed Professional Engineer in Illinois. His in- dustrial assignments included power system modeling, power systems protection, and substation design. He received his M.S
AC 2012-3262: AUTOMATION OF A BIODIESEL PROCESSOR FROMWASTE VEGETABLE OIL USING PROGRAMMABLE LOGIC CONTROLLERDr. Ahmed H. ElSawy, Tennessee Technological University Dr. Ahmed ElSawy joined Tennessee Technological University (TTU) as a professor and Chairperson, Department of Manufacturing and Industrial Technology, in July 1, 1999. He holds B.Sc., M.Sc., and Ph.D. degrees in mechanical engineering with an emphasis on materials processing and manufacturing engineering. Prior joining TTU, ElSawy held several industrial and academic positions in the USA and abroad. ElSawy teaching and research interests are in the areas of material processing, metallurgy, and manufacturing systems. ElSawy received approx. $2 million of
AC 2012-3007: UPRM CHEM E SUSTAINABLE ENERGY DEMOS, WORK-SHOPS, TOWN HALL MEETINGS, ETC.: WORKING THE PIPELINEDr. Jos Colucci Ros P.E., University of Puerto Rico, Mayagez Jos A. Colucci Ros is a professor of chemical engineering at the University of Puerto Rico, Mayagez (UPRM). He has received teaching and research awards, and professional service recognition such as Chemical Engineer of the Year in Puerto Rico, Distinguished CHEM E Professor (UPRM-CHEME) and Researcher (UPR), and 2009 EPA Environmental Quality Award. He has industry and management expe- rience, and has held leadership positions at UPRM such as Head of the Chemical Engineering Department, Associate Dean of Research in Engineering and UPRM R&D
AC 2012-3693: EMBEDDING RENEWABLE ENERGY AND SUSTAINABIL-ITY INTO THE ENGINEERING TECHNOLOGY CURRICULADr. Radian G. Belu, Drexel University Radian Belu is Assistant Professor within the Engineering Technology (ET) program, Drexel University, Philadelphia, USA. He is holding the second position as Research Assistant Professor at Desert Research Institute, Renewable Energy Center, Reno, Nev. Before joining to Drexel University, Belu held faculty and research positions at universities and research institutes in Romania, Canada, and the United States. He also worked for several years in industry as a project manager and senior consultant. He has taught and developed undergraduate and graduate courses in electronics
AC 2012-3784: ANAEROBIC DIGESTOR OF ORGANIC WASTE PRO-CESSING: A BIOMASS ENERGY PRODUCTION PROJECTDr. Wagdy Mahmoud, University of the District of Columbia Wagdy H. Mahmoud is an Associate Professor of electrical engineering at the Electrical Engineering Department at UDC. Mahmoud is actively involved in research in the areas of reconfigurable logic, hard- ware/software co-design of a system on a chip using reconfigurable logic, application-specific integrated circuits (ASIC), digital logic design, image compressions, digital signal processing, computer architec- ture, embedded systems, system on a chip, and renewable energy.Dr. Esther T. Ososanya, University of the District of Columbia Esther Ososanya is a
AC 2012-4978: HUMAN-POWERED ENERGY-EFFICIENT VEHICLE DE-SIGNDr. Alamgir A. Choudhury, Western Michigan University Alamgir A. Choudhury is an Associate Professor of industrial and manufacturing engineering at West- ern Michigan University, Kalamazoo, Mich. He earned a B.S. in mechanical engineering from BUET (Dhaka), and M.S. and Ph.D. degrees from NMSU (Las Cruces). His interest includes computer appli- cations in curriculum, mechanics, MCAE, instrumentation and control, and fluid power. He is also a registered Professional Engineer in the state of Ohio and affiliated with ASME, ASEE, SME, and TAP.Dr. Jorge Rodriguez P.E., Western Michigan UniversityMr. Jian Peng He, Western Michigan University Jian (Ben) He will
AC 2012-4378: A NEW CERTIFICATE PROGRAM IN RENEWABLE EN-ERGYDr. Ali Zilouchian, Florida Atlantic University Ali Zilouchian is currently the Associate Dean for Academic Affairs and a professor in the College of Engineering and Computer Science at Florida Atlantic University. His recent works include the appli- cations of Proton Exchange Membrane Fuel Cell (PEMFC) technology to transportation. In addition, he has conducted research on the applications of soft computing methodologies to industrial processes including, desalination processes, oil refineries, fuzzy control of jet engines, and fuzzy controllers for car engines for the past 25 years. He has supervised 19 Ph.D. and M.S. students to completion during the
AC 2012-4453: ONLINE RENEWABLE ENERGY FACILITY FOR SUP-PORTING A NEWLY DEVELOPED ENERGY AND ENVIRONMENTALSYSTEMS TECHNOLOGY PROGRAMDr. Abul K. M. Azad, Northern Illinois University Abdul Azad is a Professor with the Technology Department of Northern Illinois University. He has a Ph.D. in control and systems engineering and M.Sc. and B.Sc. in electronics engineering. He is in academics for 15+ years and his research interests include remote laboratories, mechatronic systems, adaptive/intelligent control, mobile robotics, and educational research. In these areas, Azad has more than 100 referred journal and conference papers, edited books, and book chapters. So far, he has attracted around $1.5 million of research and