Conference Session

M1C: WIP - Readiness and Professional Development

Collection

2019 FYEE Conference

Authors

Bonnie S. Boardman, University of Texas, Arlington

Tagged Topics

FYEE Conference - Paper Submission

Paper ID #28012Work-in-Progress: A Professional Learning Community Experience in De-veloping Teamwork Teaching MaterialsDr. Bonnie S. Boardman, University of Texas, Arlington Bonnie Boardman is an Assistant Professor of Instruction in the Industrial and Manufacturing Systems Engineering Department at The University of Texas at Arlington. Her primary research interests are in the engineering education and resource planning disciplines. She holds a B.S. and Ph.D. in Industrial Engineering from The University of Arkansas and an M.S. in Industrial Engineering from Texas A&M University. 2019 FYEE Conference

Conference Session

M2C: Learning by Design 2

Collection

2019 FYEE Conference

Authors

Bonnie S. Boardman, University of Texas, Arlington; Martin Kendall Wallace, University of Texas at Arlington; Morgan Chivers, UTA FabLab

Tagged Topics

FYEE Conference - Paper Submission

Paper ID #28010Full Paper: A Makerspace Project for New Transfer StudentsDr. Bonnie S. Boardman, University of Texas, Arlington Bonnie Boardman is an Assistant Professor of Instruction in the Industrial and Manufacturing Systems Engineering Department at The University of Texas at Arlington. Her primary research interests are in the engineering education and resource planning disciplines. She holds a B.S. and Ph.D. in Industrial Engineering from The University of Arkansas and an M.S. in Industrial Engineering from Texas A&M University.Mr. Martin Kendall Wallace, University of Texas at Arlington Martin K. Wallace is

Conference Session

M1A: WIP - Learning experiences 1

Collection

2019 FYEE Conference

Authors

Bonnie S. Boardman, University of Texas, Arlington; Lynn L. Peterson, University of Texas, Arlington; Nancy L Michael, University of Texas, Arlington

Tagged Topics

FYEE Conference - Paper Submission

Paper ID #28011Work-in-Progress: The Development of a Co-Taught Student Success Coursefor FreshmenDr. Bonnie S. Boardman, University of Texas, Arlington Bonnie Boardman is an Assistant Professor of Instruction in the Industrial and Manufacturing Systems Engineering Department at The University of Texas at Arlington. Her primary research interests are in the engineering education and resource planning disciplines. She holds a B.S. and Ph.D. in Industrial Engineering from The University of Arkansas and an M.S. in Industrial Engineering from Texas A&M University.Dr. Lynn L. Peterson, University of Texas, Arlington Dr

Conference Session

M1B: WIP - Learning Experiences 2

Collection

2019 FYEE Conference

Authors

Dimitrios Bolkas, Penn State University, Wilkes-Barre Campus; Jeffrey Daniel Chiampi II, The Pennsylvania State University

Tagged Topics

FYEE Conference - Paper Submission

year student awareness of the possible career paths in surveying engineering.Future work will focus on implementing version one of the immersive laboratories, as well asincluding more terrains (from off campus locations), surveying exercises (e.g., total station andtopographic mapping), and making refinements in the handling of the instrument and virtualreality environment.AcknowledgementsStudents Eric Williams, Vincent Pavil, John Chapman, Joe Fioti, Malcolm Sciandra, andCourtney Snow are acknowledged for their involvement in the data collection and modeling ofthis research.References[1] F. M. Fung, W. Y. Choo, A. Ardisara, C. D. Zimmermann, S. Watts, T. Koscielniak, E. Blanc, X. Coumoul and R. Dumke, "Applying a Virtual Reality Platform

Conference Session

T2B: GIFTS - Session B

Collection

2019 FYEE Conference

Authors

Brianna L Dorie, Gonzaga University

Tagged Topics

FYEE Conference - Paper Submission

short student engagement activity. Typically, this could bea think-pair-share about applications of the innovation, classroom survey of what type(s) ofengineering would work on this project, or even getting a show of hands to demonstrate who hadseen the innovation previously (typically less than a quarter). This provides opportunity forstudents to connect to ideas that interest them, and to see the contexts by which engineers worktogether on similar projects.Table 1. Example engineering innovations used in a first-year engineering course. Topic Innovation Major Relation(s)* Wearable sensors that detect glucose Biomedical, Chemical, Health

Conference Session

T2B: GIFTS - Session B

Collection

2019 FYEE Conference

Authors

Kurt M Degoede, Elizabethtown College; Brenda Read-Daily, Elizabethtown College; Jean Carlos Batista Abreu, Elizabethtown College

Tagged Topics

Diversity, FYEE Conference - Paper Submission

assigning members to teams using instructor-specified criteria.,” Advances in Engineering Education, vol. 2 (1), pp.1-28, 2010.[3] N. F. Jackson and S. Magun-Jackson, "Improve Your Strengths and Manage Your Weaknesses: Using the StrengthsFinder Profile in Team Development," in ASEE Annual Conference Proceedings, Nashville, 2003.[4] B. Read-Daily, K. M. DeGoede, and S. L.Zimmerman, “Gallup StrengthsFinder in Engineering, ASEE Annual Conference & Exposition” in ASEE Annual Conference Proceedings, Salt Lake City, Utah. 2018.

Conference Session

M1A: WIP - Learning experiences 1

Collection

2019 FYEE Conference

Authors

Daniel Tai Klawson, University of Maryland, College Park; Nathaniel Alexander Ferlic, University of Maryland; Cheng Peng, University of Maryland, College Park

Tagged Topics

FYEE Conference - Paper Submission

2019 FYEE Conference : Penn State University , Pennsylvania Jul 28 Work in Progress: An Introduction to Computer Vision for First-Year Electrical and Computer Engineering Students Daniel T. Klawson, Nathaniel A. Ferlic, and Cheng Peng Department of Electrical and Computer Engineering, University of Maryland, College Park Abstract-- This work-in-progress paper will detail one of of machine learning, artificial intelligence, image processing,ENEE101’s newest modules, computer vision. ENEE101 is the and self-driving cars.introductory course to electrical and computer engineering (ECE)at the University of Maryland (UMD) [1] [2]. This

Conference Session

T1C: Developing Foundations in Mathematics

Collection

2019 FYEE Conference

Authors

Hossein EbrahimNejad, Purdue University-Main Campus, West Lafayette (College of Engineering); Hassan Ali Al Yagoub, Purdue University-Main Campus, West Lafayette (College of Engineering); Catherine E. Brawner, Research Triangle Educational Consultants; Wil Stuckey, Purdue University-Main Campus, West Lafayette (College of Engineering); Tom Cody, Purdue University-Main Campus, West Lafayette (College of Engineering); Nicholas Tomlin, Purdue University-Main Campus, West Lafayette (College of Engineering); Nate Eckhart, Purdue University-Main Campus, West Lafayette (College of Engineering); Hamza Tanzeem, Purdue University-Main Campus, West Lafayette (College of Engineering); Dan Irby, Purdue University-Main Campus, West Lafayette (College of Engineering); Anna Francis, Purdue University-Main Campus, West Lafayette (College of Engineering)

Tagged Topics

Diversity, FYEE Conference - Paper Submission

: Undergraduate Academic Policy Trends across Institutions over the Last Thirty Years INTRODUCTIONMIDFIELD (Multiple Institution Database for Investigating Engineering LongitudinalDevelopment) is a database, made up of multiple higher education institutions across the U.S.,which is intended to allow for the easy comparison of the institutions. The MIDFIELD databaseincludes data from the late 1980’s until present, which encompasses the SAT/ACT scores,students’ GPA and major for each semester, students’ attained degrees, year graduated, and otherpieces of data. However, in order to better understand the differences across institutions, anunderstanding of academic policies should be conducted

Conference Session

M1A: WIP - Learning experiences 1

Collection

2019 FYEE Conference

Authors

Maria J Evans, Penn State Brandywine; Ivan E. Esparragoza, Pennsylvania State University, University Park

Tagged Topics

FYEE Conference - Paper Submission

personal growth and confidence in theirengineering design ability.References [1] Esparragoza, et al., "Assessing interactions among students geographically dispersed during multinational design projects," presented at the 121st ASEE Annual Conference & Exposition, Indianapolis, 2014. [2] H. Maury-Ramírez, R. J. Pinzón, and I. E. Esparragoza, "International Collaborative Learning Experience through Global Engineering Design Projects: A Case Study," in Cooperative Design, Visualization, and Engineering, ed: Springer, 2008, pp. 212-215. [3] E. Esparragoza, S. K. Lascano, and J. R. Ocampo, J. R., Assessing interactions among students geographically disperse during multinational design projects. ASEE, 121st

Conference Session

M2C: Learning by Design 2

Collection

2019 FYEE Conference

Authors

Jonathan R. Brown, Ohio State University; Irina Kuznetcova, The Ohio State University; Ethan Kirk Andersen; Nick H Abbott; Deborah M. Grzybowski, Ohio State University; Christopher Douglas Porter, The Ohio State University Department of Physics

Tagged Topics

Diversity, FYEE Conference - Paper Submission

State University Dr. Deborah Grzybowski is a Professor of Practice in the Department of Engineering Education at The Ohio State University. She received her Ph.D. in Biomedical Engineering and her B.S. and M.S. in Chem- ical Engineering from The Ohio State University. Her research focuses on making engineering accessible to all students, including students with visual impairments, through the use of multiple pedagogy models including VR, art-infused curriculum, and 3D printed models.Dr. Christopher Douglas Porter, The Ohio State University Department of Physics Dr. Porter obtained undergraduate physics degrees from Universitaet Leipzig, and from The Ohio State University. He completed his M. S. and Ph. D. in physics

Conference Session

M1A: WIP - Learning experiences 1

Collection

2019 FYEE Conference

Authors

Jack Bringardner, NYU’s Tandon School of Engineering

Tagged Topics

FYEE Conference - Paper Submission

coding majorthemes, misidentification of session topics, and heterogeneous sessions. These limitations can beovercome by the systematic literature review and coding of individual papers which should becompleted for the development of the first-year engineering education primer.References 1. Lauer, P. A. (2004). A Policymaker's Primer on Education Research: How to Understand, Evaluate and Use It. Mid-continent Research for Education and Learning (McREL). https://files.eric.ed.gov/fulltext/ED518626.pdf 2. Weiner, S., & Lande, M., & Jordan, S. S. (2018, June), What Have We "Learned" from Maker Education Research? A Learning Sciences-base Review of ASEE Literature on the Maker Movement Paper presented at 2018 ASEE

Conference Session

T2B: GIFTS - Session B

Collection

2019 FYEE Conference

Authors

Lauren Halberstadt, Penn State University; Yi Meng, College of Education, the Pennsylvannia State University; Jim Sauls, Pennsylvania State University; Sridevi Rao, Pennsylvania State University

Tagged Topics

FYEE Conference - Paper Submission

and domestic students to integrate in the classroom.References[1] K. Goodman & E.T. Pascarella, “First-year seminars increase persistence and retention: Asummary of the evidence from how college affect students,” Association of American Collegesand Universities, pp. 26-28, 2006.[2] S. R. Porter, & R. L. Swing, “Understanding how first-year seminars affectpersistence,” Research in Higher Education, 47(1), pp. 89-109, 2006[3] A. W. Astin, What matters in college: Four critical years revisited. San Francisco: Jossey-Bass, 1993.[4] G.L. Downey, J.C. Lucena, B.M. Moskal, R. Parkhurst, T. Bigley, C. Hays, B.K. Jesiek, L.Kelly, J. Miller, S. Ruff, J.L. Lehr, & A. Nichols-Belo, “The globally competent engineer:Working effectively with

Conference Session

M2B: Learning in teams

Collection

2019 FYEE Conference

Authors

Behzad Beigpourian, Purdue University; Matthew W. Ohland, Purdue University-Main Campus, West Lafayette (College of Engineering); Daniel M. Ferguson, Purdue University-Main Campus, West Lafayette (College of Engineering)

Tagged Topics

Diversity, FYEE Conference - Paper Submission

. Our results also highlight the importance inmonitoring and facilitating the experience of international students, which also represents animportant area for further study.References[1] ABET Engineering Accreditation Commission, “Criteria for accreditting engineering programs,” 2014.[2] National Academy Of Engineering, The engineer of 2020: Visions of engineering in the new century. 2004.[3] A. Godwin, A. Kirn, and J. Rohde, “Awareness without action: Student attitudes after engineering teaming experiences,” Int. J. Eng. Educ., vol. 33, no. 6a, pp. 1878–1891, 2017.[4] S. B. Berenson, K. M. Slaten, L. Williams, and C.-W. Ho, “Voices of women in a software engineering course: Reflections on collaboration,” J. Educ

Conference Session

M1B: WIP - Learning Experiences 2

Collection

2019 FYEE Conference

Authors

Nicole P. Pitterson, Virginia Polytechnic Institute & State University; Todd P. Shuba, Virginia Tech

Tagged Topics

FYEE Conference - Paper Submission

required totake. Additionally, at these institutions, graduate students have served as instructors of record.They will be invited to participate in the study as well. We also plan to collect data from thestudents of these first-year programs using an exploratory survey. The questions on the survey willseek to gather information about students’ initial interest in engineering prior to enrolling in theirrespective institutions, their general perception of the first year courses they have just completed,what their intended majors are, what types of activities they engaged in during their first yearcourse and if/how these activities fueled or increased their desire to continue to pursue theirengineering degrees.References[1] S. L. Christenson, A. L

Conference Session

M1B: WIP - Learning Experiences 2

Collection

2019 FYEE Conference

Authors

Sara Willner-Giwerc, Tufts University; Kristen B Wendell, Tufts University

Tagged Topics

FYEE Conference - Paper Submission

Science Foundation (NSF) GraduateResearch Fellowship. Any opinions, findings, and conclusions or recommendations expressed inthis material are those of the author(s) and do not necessarily reflect the views of the NSF.References:[1] P. J. Denning, “Viewpoint Remaining Trouble Spots with Computational Thinking,” pp. 33–39, 2016.[2] U. Ilic, H. I. Haseski, and U. Tugtekin, “Publication Trends Over 10 Years of ComputationalThinking Research,” Contemp. Educ. Technol., vol. 9, no. 2, pp. 131–153, 2018.[3] C. Concepts, A Framework for K-12 Science Education. 2012.[4] J. M. Wing, “Computational Thinking : What and Why ?,” no. November, pp. 1–6, 2010.[5] T. T. Yuen and K. A. Robbins, “A Qualitative Study of Students’ Computational ThinkingSkills in a

Conference Session

M3A: Learning in Context 1

Collection

2019 FYEE Conference

Authors

Jennifer Felder Marley, Valparaiso University; Doug Tougaw P.E., Valparaiso University

Tagged Topics

FYEE Conference - Paper Submission

-solving skills and provide them with the culminates in a final design project that requires students totheoretical technical background required in any engineering construct and program a robot that is capable of playingfield. Students are typically required to take a physics and/or “soccer.” It should be noted that direct contact with suchother science course(s), a math course, and an introduction to advanced applications is frequently not encountered until theengineering course. This introduction to engineering course last two years of study.may focus on teamwork, interdisciplinary collaboration,design principles, and a conceptual overview of the various BACKGROUNDengineering disciplines. In

Conference Session

T2C: GIFTS - Session C

Collection

2019 FYEE Conference

Authors

William Cohen, The Ohio State University

Tagged Topics

FYEE Conference - Paper Submission

  Concern Overall, many students showed  While no formal sta s cal analysis  A major concern was that stu‐enthusiasm to using the iPads  was performed, instructors observed  dents who elected to use the vice paper to pencil. The ability  no major difference in scores for  iPad, would lose the opportunity to create straight lines and cir‐ those who u lized iPads and those  to refine the motor skills neces‐cles, set different line types and  who did not.  sary to sketch technical drawings colors, and easily erase lines if  by hand.  an error was made, resulted in  There are

Conference Session

M1C: WIP - Readiness and Professional Development

Collection

2019 FYEE Conference

Authors

Soundouss Sassi, Mississippi State University; Rachel Louis Kajfez, Ohio State University; Mahnas Jean Mohammadi-Aragh, Mississippi State University; Abigail Clark, Ohio State University; Jane Petrie

Tagged Topics

Diversity, FYEE Conference - Paper Submission

understanding of their stories and get additional information about their identitiesand community development as they progress through their engineering degree pathways. Wewill see if the similarities in their stories persist or begin to diverge, how well they adapted tocivilian life, and how they are affected by the design of FYE courses.AcknowledgementsThis material is based upon work supported by the National Science Foundation under GrantNos. 1664264 and 1664266. Any opinions, findings, and conclusions or recommendationsexpressed in this material are those of the author(s) and do not necessarily reflect the views ofthe National Science Foundation.References[1] N. A. of Engineering., “Educating the engineer of 2020 : adapting engineering education

Conference Session

M1C: WIP - Readiness and Professional Development

Collection

2019 FYEE Conference

Authors

Todd France, Ohio Northern University; J. Blake Hylton, Ohio Northern University; Lauren H. Logan, Ohio Northern University; Louis A DiBerardino III, Ohio Northern University

Tagged Topics

FYEE Conference - Paper Submission

completion among college students. Learning and Individual Differences, 24, 83-88.[4] Bembenutty, H., & Zimmerman, B. J. (2003). The relation of motivational beliefs and self-regulatory processes to homework completion and academic achievement. Paper presented at the Annual Meeting of the American Educational Research Association, Chicago, Illinois.[5] Cooper, H., Lindsay, J. J., Nye, B., & Greathouse, S. (1998). Relationships among attitudes about homework, amount of homework assigned and completed, and student achievement. Journal of educational Psychology, 90(1), 70.[6] Bonham, S., D. Deardorff, and R. Beichner. 2003. Comparison of student performance using web and paper- based homework in college-level physics. Journal

Conference Session

M3B: Learning in Context 2

Collection

2019 FYEE Conference

Authors

Haolin Zhu, Arizona State University; Alicia Baumann, Arizona State University; Gary Lichtenstein, Arizona State University

Tagged Topics

FYEE Conference - Paper Submission

a, e, i Customer Discovery b, d, e, f, i, k Evaluating Solutions b, c, d Ideation b, c, d, l Rapid Prototyping g, h, q Design Iteration c, h, l Potential Value Evaluation e, i, j, k, m, n, o Market Forces e, i, j, k, n, o*Topic Area “p”, not categorized above, focuses on teamwork, which is extensive in the first-year design course and is therefore covered throughout.Based on coverage of each Topic Area, we rated each (a-q) EM outcome as to the mode(s) bywhich it was covered: Introduced, Developed Skills, and/or

Conference Session

M2C: Learning by Design 2

Collection

2019 FYEE Conference

Authors

Asad Azemi, Pennsylvania State University, Brandywine; Maria Jane Evans, Penn State Brandywine; Ivan E. Esparragoza, Pennsylvania State University, University Park

Tagged Topics

FYEE Conference - Paper Submission

subjects and as students would take the material more seriously. Weunderstand that this is not going to be an easy task especially for large programs but can be donein a smaller program [24] and deserves more attention, given the very clear associated benefits.We believe such an addition will further strengthen the implementation of a “cornerstone-capstone” approach [25].Finally, although this course includes a Student Rating of Teaching Effectiveness (SRTE) surveyat the end of the semester, given its potential role in helping students to choose an appropriatemajor and improving their soft skills and their impacts, which would not be fully realized untillong after the completion of the course, we are recommending (additional) student survey(s

Conference Session

T1B: Developing foundations in Science

Collection

2019 FYEE Conference

Authors

Bradley A. Striebig, James Madison University; Robert J Prins, James Madison University

Tagged Topics

FYEE Conference - Paper Submission

they may be able to trackthe impact of the integrated project as students’ progress through the curriculum.References 1 Striebig, B., Ogundipe, A., and Morton, S. 2014. Lessons in implementing sustainability courses into the engineering curriculum. 121st ASEE Annual Conference & Exposition, June 15-18th, 2014, Indianapolis, IN. 2 Striebig, B. 2016. Applying US EPA sustainability criteria to capstone design. Engineering for Sustainability. ASEE SE Section Annual Conference, March 13-15, 2016. Tuscaloosa, AL. 3 Striebig, B. and Morton, S. 2016. A Sustainability Indicators Based Curriculum. Engineering for Sustainability. ASEE SE Section Annual Conference, March 13-15, 2016. Tuscaloosa, AL. 4 Striebig

Conference Session

M3A: Learning in Context 1

Collection

2019 FYEE Conference

Authors

Aysa Galbraith, University of Arkansas; Heath Aren Schluterman, University of Arkansas; Leslie Bartsch Massey, University of Arkansas; Brandon Crisel

Tagged Topics

FYEE Conference - Paper Submission

1gets the index card for Team 2:Team 1 uses the starting locationand vectors given on Team 2’s indexcard to find the particular name onsenior walk that was originallyassigned to Team 2. Team 1 takes apicture at their final location, andboth Team 1 and 2 are given bonuspoints if the name assigned to Team2 can be seen in this picture. Figure 6: Example of a completed map and index card for Orienteering LabConclusionsIn this paper, we summarized the hands-on lab activities that support the mathematical conceptsin E-Math course. Most of our labs were developed utilizing the equipment that were readilyavailable to us in our department, but we hope that the ideas would be easy to modify for thosewho want to

Conference Session

M3C: Mentoring into the profession

Collection

2019 FYEE Conference

Authors

Roger J Marino P.E., Drexel University; Rosie Sullivan, Drexel University (Eng. & Eng. Tech.); Dionne Gordon-Starks, College of Engineering, Drexel University

Tagged Topics

FYEE Conference - Paper Submission

, K., & Vermeulen, B., & Bair, J. T., & Bradley, T. H. (2017, June), Confidence of Undecided First-Year Engineering Students in Choosing Their Major and Implications for Retention Paper presented at 2017 ASEE Annual Conference & Exposition, Columbus, Ohio. https://peer.asee.org/28067[2] VanDeGrift, T., & Liao, S. (2017, June), Helping First-Year Engineering Students Select a Major Paper presented at 2017 ASEE Annual Conference & Exposition, Columbus, Ohio. https://peer.asee.org/28432[3] Carnasciali, M., & Thompson, A. E., & Thomas, T. J. (2013, June), Factors influencing students' choice of engineering major Paper presented at 2013 ASEE Annual Conference & Exposition, Atlanta, Georgia

Conference Session

M1A: WIP - Learning experiences 1

Collection

2019 FYEE Conference

Authors

Jonathan Elliot Gaines, University of South Florida

Tagged Topics

FYEE Conference - Paper Submission

, pp. 9–11, 1979.[2] J. Luce, J. Anderson, J. Permaul, R. Shumer, T. Stanton, and S. Migliore, “Service-learning: An annotated bibliography linking public service with the curriculum,” 1988.[3] G. H. Roehrig, T. J. Moore, H.-H. Wang, and M. S. Park, “Is adding the E enough? Investigating the impact of K-12 engineering standards on the implementation of STEM integration,” Sch. Sci. Math., vol. 112, no. 1, pp. 31–44, 2012.[4] N. A. Tran and M. J. Nathan, “Pre-college engineering studies: An investigation of the relationship between pre-college engineering studies and student achievement in science and mathematics,” J. Eng. Educ., vol. 99, no. 2, pp. 143–157, 2010.[5] N. Tsupros, R. Kohler, and J. Hallinen, “STEM education: A

Conference Session

M1C: WIP - Readiness and Professional Development

Collection

2019 FYEE Conference

Authors

Jennifer L Johrendt, University of Windsor; Jennifer Laura Sears, University of Windsor

Tagged Topics

Diversity, FYEE Conference - Paper Submission

, D. Kotys-Schwartz, and B. Louie, “Comparing Mentor and Mentee Perspectives in a Research-Based Undergraduate Mentoring Program,” no. November, p. 229, 2013. [3] N. Islam and A. A. Weimer, “Outcomes of the Student Mentoring and Research Training (SMART) Program,” no. 1, p. V005T07A028, 2019. [4] B. Pelleg, K. Imhoff, K. Ayers, and P. Boettcher, “Utilization of an Engineering Peer Tutoring Centre for Undergraduate Students,” 2016. [5] S. Lehr, H. Liu, S. Klinglesmith, A. Konyha, N. Robaszewska, and J. Medinilla, “Use educational data mining to predict undergraduate retention,” Proc. - IEEE 16th Int. Conf. Adv. Learn. Technol. ICALT 2016, no. 1, pp. 428–430, 2016. [6] Y. Min, G. Zhang, R. A. Long, T

Conference Session

M1C: WIP - Readiness and Professional Development

Collection

2019 FYEE Conference

Authors

Reginald Perry, Florida A&M University/Florida State University; Charmane Caldwell; Melodee M Moore, Florida A&M University-Florida State University; Kenneth Tellis, Florida A&M University/Florida State University

Tagged Topics

FYEE Conference - Paper Submission

categories suggests there are many areas of opportunity toengage students. The next step in this research is to expand the analysis to include additionalsemesters, include non-common questions which have similar classifications, examine non-academic factors (e.g., level of class participation) which may also impact performance, and toultimately develop intervening protocols to improve the overall performance of all students.References[1] Demel, J., “Bringing About Marked Increases In Freshman Engineering Retention,” Proceedings of the 2002FIE Annual Conference, Montreal, Canada.,2002.[2] Choate, L. H., and Smith, S. L.,”Enhancing development in 1st‐year college student success courses: Aholistic approach,” The Journal of Humanistic Counseling

Conference Session

T1B: Developing foundations in Science

Collection

2019 FYEE Conference

Authors

Stephany Coffman-Wolph, University of Texas, Austin; Kimberlyn Gray, West Virginia University Inst. of Tech.; Marcia Pool, University of Illinois, Urbana-Champaign

Tagged Topics

FYEE Conference - Paper Submission

science education in the K-12 system,” Science and Children, 46(9),8-9, 2009.[2] T. Kolbe, and S. Jorgenson. “Meeting Instructional Standards for Middle-Level Science:Which Teachers Are Most Prepared?,” The Elementary School Journal, 2018; 118 (4): 549 DOI:10.1086/697540.[3] T. Ivey, N. Colton, J. Thomas, and J. Utley. “Integrated Engineering in ElementaryEducation: Tackling Challenges to Rural Teacher Training,” in Proceedings of the ASEE 123rdAnnual Conference and Exposition, New Orleans, LA, June 26-29, 2016, Paper ID# 15860.[4] Department of Education. “Secondary Teaching Education Undergraduate Requirements,”Department of Education at University of Michigan. University of Michigan, 2019, http://www.soe.umich.edu/academics/bachelors/secondary

Conference Session

T2C: GIFTS - Session C

Collection

2019 FYEE Conference

Authors

Tracey Carbonetto, Pennsylvania State University, Allentown; Eileen M Grodziak

Tagged Topics

FYEE Conference - Paper Submission

Classroom Interaction, 46(1), 37-48.[3] Bellinger, David B; DeCaro, Marci S. (2015). Mindfulness, anxiety, and high-stakes mathematicsperformance in the laboratory and classroom. Consciousness and Cognition, v. 37 pp. 123–132.

Conference Session

T2A: GIFTS - Session A

Collection

2019 FYEE Conference

Authors

Sarah C Ritter, Pennsylvania State University, University Park; Susan C. Beyerle, Pennsylvania State University, University Park

Tagged Topics

FYEE Conference - Paper Submission

components): Teamwork: 3 or 4 person teams Unique drawings: Modified assignment per team Sketching skills: Individually complete dimensioned multiview drawings Making skills: Using another team’s drawings, individually manufacture piece(s) from wood with basic shop tools; assemble using press fit, paint Evaluation skills: Interpret / critique drawings during build; critically evaluate 3D print 3D design skills: Model, print accessories, evaluate prints, redesign CAD models Implementation: This assignment takes place over a number of assignments – a timeline is provided to the right, with approximate timing for in- and out-of-class activities. The instructor provides instruction and supplies. Students work