Collection

2015 ASEE Workshop on K-12 Engineering Education

Authors

Jessica S Ward, Drexel University (Eng. & Eng. Tech.); Adam K Fontecchio, Drexel University (Eng. & Eng. Tech.); Robert Shultz, Drexel University; Gabriel Burks, Drexel University

principles todesign a structure capable of bearing maximal loads, and finally reflect on newly gainedknowledge to design a lesson plan aimed at teaching statics principles to younger students.b. This workshop will include 3 phases: learn, build, and review. Learn (30 min): Working in groups of 2-3, participants will be given time to build two separate structures from 8.5 x 11 paper and scotch tape, according to clear instructions. After building each type of structure, participants will weight-test each structure and record the maximum load prior to mechanical failure. Participants will then regroup and participate in a class discussion outlining underlying statics principles that explain why one design performs

Collection

2015 Northeast Section Meeting

Authors

Walter W. Buchanan; Ali Mehrabian; Alireza Rahrooh; M. Kudret Yurtseven

2015 ASEE Northeast Section Conference Planning for a Health Care Technology Certificate Walter W. Buchanan Texas A&M University Ali Mehrabian, Alireza Rahrooh Daytona State College M. Kudret Yurtseven Izmir UniversityAbstractHerein will be described the planning to reactivate a Health Care Technology Certificate in theDepartment of Engineering Technology and Industrial Distribution in the College ofEngineering at Texas A&M University College Station. The

Collection

2015 ASEE Zone 3 Conference

Authors

Byron Garry

2015 ASEE Zone III Conference (Gulf Southwest – Midwest – North Midwest Sections) Developing a Sustainable ABET Continuous Improvement Plan Byron Garry South Dakota State UniversityAbstractA sustainable continuous improvement process was required for use in the ABET-ASAC andABET-ETAC accreditation process for our Operations Management, Construction Management,and Electronics Engineering Technology programs. Considering the state of assessmentrequirements in higher education, ABET accreditation standards, and the tools of quality andcontinuous improvement, our Department of Construction &

Conference Session

The Human Element of Librarianship

Collection

2015 ASEE Annual Conference & Exposition

Authors

Sara M. Samuel, University of Michigan; Paul F. Grochowski, University of Michigan; Leena N Lalwani, University of Michigan; Jake Carlson, University of Michigan Library

Tagged Divisions

Engineering Libraries

Paper ID #12072Analyzing Data Management Plans: Where Librarians Can Make a Differ-enceSara M. Samuel, University of Michigan Sara is an engineering librarian at the University of Michigan University Library where she is a liai- son to the Electrical Engineering and Computer Science Department and the Atmospheric, Oceanic and Space Sciences Department. Sara has a bachelor of arts from Hope College and a Master of Science in Information from the University of Michigan.Mr. Paul F. Grochowski, University of Michigan Paul Grochowski is an engineering librarian at the University of Michigan.Ms. Leena N Lalwani, University of

Conference Session

Technical Session: Professional Development Opportunities for Students

Collection

2015 ASEE Annual Conference & Exposition

Authors

Natacha Depaola, Illinois Institute of Technology; Jamshid Mohammadi P.E., Illinois Institute of Technology; Paul R. Anderson, Illinois Institute of Technology; Eric M. Brey, Illinois Institute of Technology; Roberto Cammino, Illinois Institute of Technology; Bonnie Haferkamp, Illinois Institute of Technology; Fouad Teymour, Illinois Institute of Technology

Tagged Divisions

Student

Paper ID #13893An automated on-line portfolio for engineers: Planning and Tracking studentactivity – A tool for job interviewsDr. Natacha Depaola, Illinois Institute of TechnologyDr. Jamshid Mohammadi P.E., Illinois Institute of TechnologyProf. Paul R. Anderson, Illinois Institute of Technology Paul Anderson is a registered professional engineer with over 30 years of combined industrial and aca- demic experience related to water resources. At the Illinois Institute of Technology for more than 20 years, he teaches courses in water chemistry, ground water contamination, chemical transport in the envi- ronment, and industrial

Conference Session

NSF Grantees’ Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Juan C Morales, Universidad del Turabo; Yacob Astatke, Morgan State University; Kenneth A Connor, Rensselaer Polytechnic Institute; Michael J. Prince, Bucknell University; Idalides Vergara-Laurens, Universidad del Turabo; Mary Cristina Ruales Ortega, Universidad del Turabo

Tagged Topics

NSF Grantees Poster Session

Paper ID #11802A Plan to Diffuse Mobile Hands-On Teaching and Learning in Puerto RicoDr. Juan C Morales, Universidad del Turabo Dr. Juan C. Morales, P.E., joined the Mechanical Engineering Department at Universidad del Turabo (UT), Gurabo, Puerto Rico, in 1995 and currently holds the rank of professor. Dr. Morales was the ABET Coordinator of the School of Engineering for the initial ABET-EAC accreditation of all four accredited programs at UT. He has been Department Head of Mechanical Engineering since 2003. His efforts to diffuse innovative teaching and learning practices derive directly from the outcomes assessment plan

Conference Session

NSF Grantees’ Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Cheryl Carrico, Virginia Tech; Matthew Arnold Boynton PE P.E., Virginia Tech Department of Engineering Education; Holly M Matusovich, Virginia Tech; Marie C Paretti, Virginia Tech

Tagged Topics

NSF Grantees Poster Session

Paper ID #12518Supporting Students’ Plans for STEM Careers: How Prepared are HighSchool Educators in Appalachia to Help?Dr. Cheryl Carrico, Virginia Tech Cheryl Carrico is a Postdoctoral Research faculty member for Virginia Tech. Her current research fo- cus relates to STEM career pathways (K-12 through early career) and conceptual understanding of core engineering principles. Prior to her current role, Dr. Carrico spent over 25 years in the aerospace in- dustry conducting and leading R&D, design engineering, and project management for composite aircraft components. Dr. Carrico received her B.S. in chemical engineering

Collection

2015 Fall ASEE Middle Atlantic Section Conference

Authors

Diego Aldana; Alan Cheville; Gretchen Hueges; Joe Meiser; Nathan Siegel; Margot Vigeant

The Maker Movement at Bucknell: A Plan for Developing, Launching, and Managing On-Campus MakerSpaces Diego Aldana1, Alan Cheville2, Gretchen Hueges3, Joe Meiser4, Nathan Siegel1,*, Margot Vigeant5 1 Mechanical Engineering, Bucknell University 2 Electrical and Computer Engineering, Bucknell University 3 th 7 St. Studio, Bucknell University 4 Art & Art History, Bucknell University 5

Conference Session

Concurrent Paper Tracks - Session I

Collection

2015 ASEE International Forum

Authors

Maria M. Larrondo-Petrie, Florida Atlantic University

Tagged Topics

International Forum

Paper ID #14354Engineering for the Americas: Progress on the Action Plans of the Ministersof Science and Technology of the Organization of American StatesDr. Maria M. Larrondo-Petrie, Florida Atlantic University Dr. Larrondo Petrie has a Ph.D. in Computer Engineering and is a Professor and Associate Dean of International Affairs in the College of Engineering and Computer Science of Florida Atlantic University. She is the Executive Director of LACCEI (Latin American and Caribbean Consortium of Engineering Institutions) and served in the past as an officer of the International Division of ASEE (American Society of

Conference Session

Community Engagement in Engineering Education Projects

Collection

2015 ASEE Annual Conference & Exposition

Authors

Rohit Kandakatla, Student Platform for Engineering Education Development (SPEED); Dhinesh Balaji Radhakrishnan, Student Platform for Engineering Education Development (SPEED); Krishna Vedula, University of Massachusetts Lowell

Tagged Divisions

Community Engagement Division

field of EE through development of numerous action plans bystudents. Students were empowered to face, plan and solve their local EE issues. More thantwenty-five workshops have been conducted by SPEED focusing on various themes, which ledto a nationwide presence and collaboration with IUCEE (Indo-US Collaboration for EngineeringEducation). With IUCEE's immense support, the national chapter of SPEED India was created in2013. In 2013, SPEED India formulated a general theme on EE which aided in introducing theconcept in detail to the student group. With the experimentation methodologies SPEED Indiahave used so far and in moving forward in the current year of 2014, it chose to move thisdialogue and developments in EE a step forward. Involving

Conference Session

Eco-Car Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Shawn Midlam-Mohler,, Ohio State University ; Jason Linger, Ohio State University ; Jack Slavinski, Ohio State University ; Lisa Fiorentini, Ohio State University

Tagged Topics

Eco-Car Poster Session

software, semesterprojects, and case study scenarios. This course features guest speakers who share their projectmanagement and industry experiences. Of the three courses discussed in this paper, this courseis the only one that is a requirement for an undergraduate major. This is the case with many ISEprograms because of the importance of these skills for graduating ISE students. The learningobjectives for this course are for a student to: Page 26.1263.4 1. Understand what effective project leadership, sponsorship and good communication means and why it makes a difference. 2. Conduct effective project planning from start to finish and

Collection

2015 Spring ASEE Middle Atlantic Section Conference

Authors

Ellyn A. Lester; Linda M. Thomas

to address soft skills such as leadership,negotiation, and empathy. In the Construction Management program housed in the School ofEngineering at our institution, a pilot course titled Strategic Responses to Cyclical Environmentsis being offered. Students’ careers and their ability to make an impact in firms will be enhancedby leveraging their increased understanding of competitive advantage, positioning, and strategicplanning via this course.In response to the boom and bust cycle typical of the Architecture / Engineering / Construction(AEC) industry, students are learning to gather and process ambiguous information while forgingmeaningful plans for the future. Intrapreneurial and entrepreneurial initiative, tough analyticalthinking

Conference Session

Revitalization of Manufacturing Education

Collection

2015 ASEE Annual Conference & Exposition

Authors

Niaz Latif, Purdue University, Calumet; Steven Wendel, Sinclair Community College; Mohammad A. Zahraee, Purdue University, Calumet; Aco Sikoski, Ivy Tech Community College; Ronald J. Bennett F.ASEE, F.ABET P.E., University of St. Thomas

Tagged Divisions

Manufacturing

demonstrates that change is difficult, and is best accomplished when teams ofindividuals from various aspects of the organization are engaged and take ownership.viii Leadership begins with understanding of one’s self.ix The program includes self-assessment of each participant to assist them in discovering their strengths, their learning styleand other factors that help them develop the leader within, and to help them identify and recruitother collaborators, team members, mentors and supporters needed to help them accomplish theirgoals.Program Structure The LCBP is structured to provide adequate time and guidance for participants tocomplete the two major assignments: 1) create a personal leadership development plan and 2)create a program

Conference Session

Research to Practice: STRAND 1 – Addressing the NGSS: Supporting K-12 Teachers in Engineering Pedagogy and Engineering Science Connections (Part 1)

Collection

2015 ASEE Annual Conference & Exposition

Authors

Linda S. Hirsch, New Jersey Institute of Technology; Howard S. Kimmel, New Jersey Institute of Technology; John D. Carpinelli, New Jersey Institute of Technology

Tagged Divisions

K-12 & Pre-College Engineering

introduction of the Next Generation Science Standards. Although reports onthe results of most RET programs appear to be positive in terms of teacher satisfaction, gainingresearch skills and improved content knowledge about engineering, few programs have reportedon the use of any systematic process to guide teachers in the development of their instructionalmodules or lesson plans, and most programs appear to lack follow-up and\or reports ofclassroom implementation from the lessons.Our University has completed one three-year RET program in the area of pharmaceuticalengineering and has begun a second. Each participating teacher has been able to enrich his or herown knowledge-base as a STEM education professional as an active member of a research

Conference Session

Issues in Engineering Technolgy Education

Collection

2015 ASEE Annual Conference & Exposition

Authors

Terence Geyer, Eastern Washington University; William R Loendorf, Eastern Washington University

Tagged Divisions

Engineering Technology

has to be anotherway to meet this challenge. In conventional course occurrences, events like a midterm, final andassignments tend to overlap between classes, and can cause big spikes in student workload. Withan increased number of students in each class, students can also feel the pressure of increasedcompetition. These stresses’ on both faculty and students, negatively affect the positive outcomesdesired by both groups. This paper describes the formulation, design, and execution of twoplanning methods used to help balance the needs, workload, and time resources for both thefaculty and students in an Engineering curriculum. One approach compares weekly instructorworkload for the planning and delivery across three classes. Covering items from

Conference Session

Research to Practice: STRAND 4 K-12 Engineering Resources: Best Practices in Curriculum Design (Part 2)

Collection

2015 ASEE Annual Conference & Exposition

Authors

Shashi S. Nambisan P.E., University of Tennessee, Knoxville; Jennifer Richards, University of Tennessee; Wenshu Li, The University of Tennessee

Tagged Divisions

K-12 & Pre-College Engineering

Paper ID #14160Transportation System Based Summer Academy for Teachers (RTP, Strand4)Dr. Shashi S. Nambisan P.E., University of Tennessee, Knoxville Shashi Nambisan is a Professor of Civil Engineering at University of Tennessee, Knoxville (UT). Since 1989, he has led efforts on more than 165 research, education, and outreach projects that have addressed local, statewide, regional and national issues in transportation and infrastructure systems management related to policy, planning, operations, safety, and risk analysis. He has authored or co-authored more than 125 peer reviewed journal and conference publications. Along

Collection

2015 Fall ASEE Middle Atlantic Section Conference

Authors

Peter Mark Jansson; Neil M. Boyd

cost photovoltaicsystems and to professionally interact with real potential customers to review a system proposalfor their residence. Simultaneously, the student participants were learning to develop realbusiness plans for a venture located in a market of their choosing in the US or abroad. Thefaculty was able to bring in an excellent group of outside speakers consisting of individuals whonearly all started, operated (and potentially sold) a photovoltaic business. The majority of thesespeakers were alumni of the university. The companies included Solar City, Renewable EnergyAlliance, SoCore Energy, Lenape Solar, Mesa Solar, SunTechnics, KC Larson, and CommunityEnergy. Student teams carried out a dozen feasibility assessments as well as many

Conference Session

Curriculum in Engineering Leadership Development

Collection

2015 ASEE Annual Conference & Exposition

Authors

Clinton Stephens, Iowa State University; Katherine Lynn Friesen, College of Engineering, Iowa State University

Tagged Divisions

Engineering Leadership Development Division

and leadership. Students are asked to identify and interview aleader of their choice, analyzing the information gathered from the interview using their personaldefinitions. As a final reflection, students create a self-commitment plan consisting of personaldefinitions of a leader and leadership, personal values, vision statement, and identifiableleadership opportunities while in college.   We have implemented this module as a course facilitated by a graduate assistant.Discussions and the self-commitment plan were spread throughout half of the semester in aneight-week course. Students who have completed the module are invited as to serve as a peermentors that facilitate discussion and activities. A more abbreviated module could

Conference Session

Two-year College Division: Authors Address Transfer Matters-Part I

Collection

2015 ASEE Annual Conference & Exposition

Authors

Tanya Karam-Zanders, Louisiana State University; Dina Acklin, Louisiana State University; Sarah Cooley Jones, Louisiana State University; Warren N. Waggenspack Jr., Louisiana State University

Tagged Topics

Diversity

Tagged Divisions

Two Year College Division

implications. Community College Journal of Research and Practice, 28, 331 – 351. Page 26.289.8 APPENDIX A  SECTION 1 In this section, you will be asked to think back to when you were about to transfer to LSU. Specifically, what were your concerns regarding the potential hurdles you were going to face?   1. Did you expect to face any ACADEMIC hurdles?   a. If so, please describe them:  b. How did you plan to overcome the hurdles?  c. Did you actually experience these hurdles in your first year?   d. If so, how did you overcome them

Conference Session

Engineering Management Division Technical Session 5

Collection

2015 ASEE Annual Conference & Exposition

Authors

Michael Browder, Bristol Tennessee Essential Services; Andrew J. Czuchry, East Tennessee State University; April Eads

Tagged Divisions

Engineering Management

and technical leaders from all areas look for innovativetechnology that can enhance both business units. The business problem was solved using a nonlinear approach without disrupting the company’s day to day operation. The result became twostand alone non linear businesses operating under a joint linear process.IntroductionThe conceptual framework, facilitated by applying Baldrige Criteria, is illustrated andimplementation coaching points are suggested using the technology and business narrative of thetransformation of Bristol Tennessee Electric System into Bristol Tennessee Essential Services(BTES). The eureka occurred when the engineering plan to implement a broadband servicecapability was viewed as also providing enhanced capabilities for

Conference Session

Fundamental: K-12 Students and Engineering Design Practices (Part 1)

Collection

2015 ASEE Annual Conference & Exposition

Authors

Kristen Bethke Wendell, University of Massachusetts Boston; Christopher George Wright, University of Tennessee, Knoxville; Patricia C Paugh, University of Massachusetts Boston

Tagged Topics

Diversity

Tagged Divisions

K-12 & Pre-College Engineering

-making does take place during engineering designexperiences in culturally and linguistically diverse urban classrooms, and we present two studentgroup case studies to support that argument. We discuss implications of this work for elementaryengineering instructional design, pedagogy, and educational research.IntroductionIn its Framework for K-12 Science Education, the National Research Council writes, “Engineers,too, make decisions based on evidence that a given design will work; they rarely rely on trial anderror” (NRC, 2012, p. 62). For engineers to plan feasible solutions and revise solutions they havealready tested, they need to engage in reflective decision-making that takes into accountinformation about design options. This intentional

Conference Session

Teaching the Business Side of Construction

Collection

2015 ASEE Annual Conference & Exposition

Authors

Jake Smithwick, Arizona State University; Kristen Caroline Hurtado, Arizona State University; Anna Thurston, Arizona State University; Kenneth Timothy Sullivan, Arizona State University

Tagged Divisions

Construction

also pursuing her PhD, Kristen is also working towards another graduate degree in Education and Instructional Design.Anna Thurston, Arizona State University Anna Thurston is a Master’s student at Arizona State University with professional experience in the op- timization of the building life cycle and Strategic Facility Planning. She earned a Bachelor of Science in Urban and Environmental Planning from Arizona State University in 2013 and is currently pursuing a Master of Science in Construction Management with a focus in Facility Management. She is passionate about the Built Environment and is committed to industry improvement, the application of sustainable practices and helping to foster student enrollment into

Conference Session

Issues in Engineering Technolgy Education

Collection

2015 ASEE Annual Conference & Exposition

Authors

Christina R Scherrer, Southern Polytechnic State University; Leigh Sharma; Jennifer Vandenbussche, Kennesaw State University; Valerie Washington, Kennesaw State University

Tagged Topics

Diversity

Tagged Divisions

Engineering Technology

instructor? Animplementation intention is a clear strategy for achieving a goal, in the form of an “if-then”plan, that specifies the when, where and how a goal is to be reached1. For example, “If I havejust finished my 10AM circuits class, then I will go to the library and work on my calculushomework until my next class.” There is a rich body of literature in the field of psychologyshowing the success of implementation intentions, applied to things as diverse as exercise,impulse control, and overcoming addiction. However, prior to this study, very little work hasbeen done applying this practice to academics.Authors of motivational theories assert intentions play a causal role in behavior, including thetheory of reasoned action2 and the theory of

Conference Session

Biomedical Engineering Division Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Jennifer Kadlowec, Rowan University; Tom Merrill, Rowan University; Robert Alan Hirsh, Cooper University Hospital; Sameer Sood, Rowan School of Osteopathic Medicine

Tagged Divisions

Biomedical

deliverables: needsspecifications, project plans and posters, for three needs. These needs were chosen based onareas of clinical need, cost effectiveness, interest and feasibility for milestone completion incapstone design during the academic year. Scholars met with faculty to gauge potential solutionsfrom the basic science and clinical perspectives. The summer program ended with a finalScholar symposium of projects, reflections of the Scholar experiences and plans for academicyear projects. Table 1 summarizes the 2014 Rowan Bioengineering Scholars Program.  Table 1: Summer 2014 Rowan Bioengineering Scholars Program   Week   Topic   Deliverable   1   Overview of program and Basic physiology

Conference Session

Mechanical, Electrical and Plumbing (MEP) Topics in Construction Education

Collection

2015 ASEE Annual Conference & Exposition

Authors

Rogelio Palomera-Arias, University of Texas, San Antonio; Rui Liu, University of Texas, San Antonio

Tagged Divisions

Construction

principles governing the systems, followed by descriptions ofequipment, materials and methods, and systems layouts; and ending with system design andsizing methods with fully explained and worked examples. Each chapter includes at the endproblems and exercise pertaining to the material covered in the chapter.The textbook provides coverage of MEP construction drawings, presenting common symbolsand abbreviations used. Plans, riser diagrams, as well as isometric sketches are presented tosupplement the systems descriptions. Also, this is the only book of that introduces the concept ofsystems coordination, and as such provides common installation and clearance requirements forthe various systems. The coordination information is provided using detailed

Conference Session

Topics Related To Engineering Design Graphics Division

Collection

2015 ASEE Annual Conference & Exposition

Authors

Edward E. Osakue, Texas Southern University

Tagged Divisions

Engineering Design Graphics

Drafting andDesign) software in the market worldwide. In fact it is the software commonly used inintroducing CAD (Computer-Aided Drafting) to students at High Schools, Junior Colleges and inmany Universities. AutoCAD is unquestionably the most popular software for 2D designdrafting but is not so commonly used in solid modeling. However, with good mastering,AutoCAD solid modeling is highly versatile and can be competitive in small and mid-sizedengineering design and consulting firms who lack financial resources for investment in rapidlychanging parametric solid modelers.This paper explores the teaching of solid modeling using AutoCAD. It presents a two phaseprocedural technique (planning and construction) that helps students to master solid

Conference Session

Technical Session: Student Experience & Perspectives

Collection

2015 ASEE Annual Conference & Exposition

Authors

Rachel Jannette McFalls, Mississippi State University; Carla Danielle Grimes, Mississippi State University; M. Jean Mohammadi-Aragh, Mississippi State University; Rani W. Sullivan, Mississippi State University; James Warnock, Mississippi State University

Tagged Divisions

Student

system for an all-composite unmanned aerial vehicle.Dr. James Warnock, Mississippi State University James Warnock is the Interim Associate Dean for Undergraduate Studies in the Bagley College of Engi- neering at Mississippi State University. His background is in biomedical engineering and he has been a big proponent of self-directed learning and active learning in his classes and was the first person to intro- duce problem-based learning in the department of agricultural and biological engineering at MSU. James is also the Adjunct Director for training and instruction in the professional services department at ABET. In this role, Warnock oversees the development, planning, production and implementation of the ABET

Conference Session

Entrepreneurship & Engineering Innovation Division – Evaluating Student Behaviors and Attitudes

Collection

2015 ASEE Annual Conference & Exposition

Authors

Magdalini Z Lagoudas, Texas A&M University; Rodney Boehm, Engineering Academic and Student Affairs; James L Wilson, Texas A&M University - College of Engineering

Tagged Topics

Diversity

Tagged Divisions

Entrepreneurship & Engineering Innovation

and data products developed by Fujitsu. Along with Yau Chow Ching, Rodney conceived (and wrote the standards for), the SONET (Synchronous Optical Network) architecture, which served as the base for today’s North American telephone network. Rodney was Chairman of the T1X1 Technical Sub- Committee (the organization responsible for SONET standardization) from 1990 through 1994. He has been active in SONET’s National and International Standardization since 1985. In addition, Rodney has published numerous papers and presentations on SONET. Rodney began his career with Fujitsu Network Communications in 1989 as the Director of Strategic Plan- ning. He also held the positions of Director of Transport Product Planning, Vice

Conference Session

Construction Education Topics

Collection

2015 ASEE Annual Conference & Exposition

Authors

Fadi Castronovo, Pennsylvania State University, University Park; Sarah E. Zappe, Pennsylvania State University, University Park; John I. Messner, Pennsylvania State University; Robert M. Leicht, Pennsylvania State University

Tagged Topics

Diversity

Tagged Divisions

Construction

Simulator (VCS), developed and implemented to engage students in an activelearning environment by simulating the planning and management of a construction project. Theprevious version of the VCS has shown great potential in enhancing students’ motivation andbasic learning of dynamic construction concepts, traditionally acquired through practicalexperience. A new version has been developed utilizing the ADDIE (analyze, design, develop,implement, evaluate) framework for the design of instructional material. Through thedevelopment of the VCS4, we aim to illustrate how a rigorous analysis of cognitive models andtheories, instructional design guidelines for multimedia learning, fundamentals of humancomputer interaction theories, and 4D simulation

Conference Session

Multidisciplinary Approaches to Sustainability and Grand Challenges

Collection

2015 ASEE Annual Conference & Exposition

Authors

Saviniano Samuel Perez, Arizona State University

Tagged Topics

Diversity

Tagged Divisions

Multidisciplinary Engineering

. Page 26.826.4The class will act as a consulting group representing various interests: the community, the city ofGoodyear and the state of Phoenix. The City of Goodyear has strategic action plan found in thislink: http://www.goodyearaz.gov/government/city-manager-s-office/strategic-plan-goals whichcan be used a starting point.The class will be divided into three groups to advocate for three sectors: community citizens, cityadministrators and state officials. The groups will represent the transportation needs, plans andbudgets of their representative sector. Using a brainstorming visualization map (suggestion:Power Point Smart Art Graphics) brainstorm the elements of your group’s vision statement forthe City of Goodyear, Arizona. This vision