Collection

1996 Annual Conference

Authors

Manon Bourgeois; Gilbert Drouin

percent to 74,596students, reflecting a reduction in the number of foreign nationals (residents of other countries) enrolled.”(1). In Quebec, we have noticed the same pattern in all the cycles of studies. And at Ecole Polytechnique the samesituation prevails. If we look at some recent figures, it clearly shows the clientele of fill-time undergraduateenrollment in engineering dropped almost 12% from 3704,60 students in fall 1992 to 3262,73 students in fall 1994. Page 1.257.1 $&&’-’ F 1996 ASEE Annual Conference Proceedings ‘@llHllL

Collection

1996 Annual Conference

Authors

Timothy Cameron; David W. Russell

plane sound wave reflects from a partially absorbing surface, theyare asked to calculate the absorption coefficients by hand. One end of the impedance tube is driven by aloudspeaker at a single frequency, and the sample is placed at the other end of the tube, held in place by arigid cap. Students locate a pressure maximum (antinode) and minimum (node) by moving a microphonealong the length of the tube and observing the pressure level using the B&K 2133 octave band analyzer.After calculating the standing wave ratio, sound power absorption coefficient, and the mechanical impedanceof the sample by hand the students are allowed to use an older B&K analog analyzer which measures the ab-sorption coefficient directly. Testing several samples

Collection

1996 Annual Conference

Authors

Norbert L. Ackermann; Anthony G. Collins

quality undergraduate education as a primary mission.Typically schools that listed graduate education as a goal also considered research and scholarship as agoal. A number of issues stressed by ABET were apparent for a cohort of schools. There weredistinctions between departments however in terms of what was reflected in the overall expression ofdepartment goals. Interestingly goals did not commonly reflect teamwork, the development ofinterdisciplinary perspectives, a personal concern for student development, or leadership of educationalinstitutions in defining the Civil Engineering profession. Those institutions that demonstrated a seriouseffort by developing a strategic plan for establishing their mission and goals statement appeared to

Collection

1996 Annual Conference

Authors

Merl Baker

programs. An analogy is drawn between the issues proposed by these articles and deep-rooted problemstargeted by Michael Hammer’s and Steven Stanton’s [10] in the “Reengineering Revolution” and Hammer’s and JamesChampy’s justifications for “Reengineering the Corporation” [9]. However, caution must be exercised not to erode theproven process. This alert is well justified by Norman R. Augustine. [2] Arguments for Change Armstrong and Griffiths make strong arguments for change in order to meet employer’s demands. Phillip Griffithsis Chair of the National Academies’, (NAS, NAE, NIM) Committee on Science, Engineering, and Public Policy,(COSEPUP). His article reflects the deliberations of the

Collection

1996 Annual Conference

Authors

Byron S. Gottfried

was only1.85 (because of the much larger number of low-valued responses). The listings of “other” topics is quite broad, reflecting various disciplinary interests.I. Required Prerequisites1- Basic computer skillso 1 2 3 4 Total Average 20 22 17 12 71 2.302- Word processingo 1 2 3 4 Total Average 19 14 16 12 61 2.343- Spreadsheet applicationso 1 2 3 4 Total Average 17 10 12 3 42 2.024- Equation solverso 2 3 4

Collection

1996 Annual Conference

Authors

Stephen J. Ressler; Thomas Lenox

challenges facing civil engineers in professional practice. (P04) ● use the computer effectively and appropriately as a problem-solving tool. (P05) ● write and speak effectively. (P06) ● are prepared for and motivated toward continued intellectual and professional growth. (P07)Develop and maintain a faculty that serves as a model of professional excellence for our cadets. (P08) Objectives PO1 through P07 emanate directly from the institution’s published Academic Program Goals.These objectives are focused on the principal products of our program--our graduates--and on the qualities andskills we expect them to possess as a direct consequence of their undergraduate education. The relatively broadscope of the objectives reflects the

Collection

1996 Annual Conference

Authors

Rick L. Homkes; Kevin D. Taylor

and curricular mattersfrom the two local universities. The teachers receive a stipend and three graduate credits in education forcompleting the program. Improvements were made in the 1995 VISION project based upon lessons learned from the 1994 pilot.These included increased instruction time from faculty members of Purdue and Indiana Universities, especiallyin the areas of statistical control, quality management, biology, and physics. A second change provided theteachers more time to both reflect upon the industry experience and prepare the required instructional module.VISION 95 attracted more teachers, more industry partners and received funding from an Eisenhower grant. The major goals of the program continue to be increased

Conference Session

Exploring Technological Literacy and Awareness

Collection

2009 Annual Conference & Exposition

Authors

Farzin Heidari, Texas A&M University, Kingsville

Tagged Divisions

Two Year College Division

, identifying each attribute and itscharacteristics, and identifying the excellent and poor quality work using narrative descriptivecriteria. Holistic rubrics and analytical rubrics are both used to measures students understandingof course content. Holistic rubrics provide a choice to state the highest and lowest levels ofperformance combining the descriptors for all attributes and analytical rubrics state the highestand lowest levels of performance using the descriptions for each attribute separately. The use ofrubrics allows the instructor to provide quality feed back to the student along with providingevaluation and reflection opportunities for an instructor as well. The use of rubrics in a technicalprogram will provide accountability and evaluation

Conference Session

Women in Engineering Division Poster Session

Collection

2009 Annual Conference & Exposition

Authors

Elizabeth Creamer, Virginia Tech

Tagged Divisions

Women in Engineering

likeappearance, dress, and family roles are byproducts of tokenism that detract fromaccomplishments.Tokenism and attention to secondary characteristics provides a partial explanation for whybehaviors, such as sexual harassment, persist in some environments where women are visiblyunder-represented among the faculty and student body. Policies and practices that communicateconcern about the under-representation of women can improve perceptions of climate andoffset tensions created by tokenism2.Studies that identify environmental factors that impact the productivity and satisfaction offaculty are often framed within a body of literature about climate or culture. Climate refers tomeasures based in faculty perceptions and attitudes. Climate reflects culture

Conference Session

Innovative and Nontraditional Curriculum in IT/IET

Collection

2009 Annual Conference & Exposition

Authors

David Hata, Portland Community College; James Dockendorf, Normandale Community College

Tagged Divisions

Engineering Technology

manufacturing process.The cost of implementing these experiments would range from inexpensive to Page 14.1165.6costly, requiring outside funding.Two pieces of equipment are critical to implementing the breadth of laboratoryexperiences. The first instrument, the MFJ-259B SWR analyzer shown in Figure1, is a low-cost meter used by ham radio enthusiasts to troubleshoot and maintaintheir equipment. It has the capability of measuring impedances in bothrectangular form (R and X) and polar form (Z, and σ ). In addition, it alsomeasures the standing wave ratio and reflection coefficient. The MFJ-259B SWRanalyzer can be used to support a variety of transmission line and

Conference Session

Mentoring and Development of New Faculty

Collection

2009 Annual Conference & Exposition

Authors

Richard Taber, National Academy of Engineering; Elizabeth Cady, National Academy of Engineering; Norman Fortenberry, National Academy of Engineering

Tagged Divisions

New Engineering Educators

willevaluate the selected metrics. This paper summarizes the committee report.IntroductionScholarship of teaching [1] is often compared with the scholarships of discovery and synthesis.Shulman [2] further categorized the scholarship of teaching as discovery scholarship within theeducational domain [3] and scholarly teaching as teaching that (a) focuses on learning outcomesand teaching practices, (b) originates with knowledge of pedagogy and course content, and (c)includes self-reflection, discussions with peers, and participation in peer evaluation [4].When engineering faculty members attend to the different ways in which students learn, thestudents become more engaged and also learn more course content and connections betweenengineering concepts

Conference Session

Engineering and Other Disciplines

Collection

2009 Annual Conference & Exposition

Authors

Mahmoud Quweider, University of Texas, Brownsville; Adriana Perez, University of Texas, Brownsville; Gabriala Oropeza, University of Texas, Brownsville; Juan Iglesias, University of Texas, Brownsville

Tagged Divisions

Multidisciplinary Engineering

application was tested with 10 realsample surveys. The appendix shows a sample of one of such surveys. As the software was putto use, the staff from the school of public health started giving feedback on any discovered bugsin the system. The GUI was adjusted more than once to reflect new requirements. Major changes Page 14.351.8and new recommendation were left for upcoming releases and future collaborations.Assessment and InstitutionalizationThe project was engaging to the CIS and Public Health students in many ways. To capitalize onthe success of this experiment and benefit future students, the leaders of the project, Dr.Quweider and Dr

Conference Session

Emerging Trends in Engineering Education Poster Session

Collection

2006 Annual Conference & Exposition

Authors

David Haws, Boise State University

2006-46: WOMEN ON THE MARGIN OF ENGINEERING: ACCEPTABLE ANDUNACCEPTABLE THESESDavid Haws, Boise State University Page 11.1455.1© American Society for Engineering Education, 2006 Women on the Margin of Engineering: Acceptable and Unacceptable ThesesAbstractWhat demographics should an engineering faculty reflect, and how might it acceptably differ inappearance from its students, the broader community, or the narrower complex of professionalsand research consumers it purports to serve? Of course, we are horribly partial to our own DNA,but we can also reason through to the needs of society and put aside our personal bias. Similarly,our

Conference Session

Emerging Trends in Engineering Education Poster Session

Collection

2006 Annual Conference & Exposition

Authors

Saeed Khan, Kansas State University-Salina; Beverlee Kissick, Kansas State University-Salina

/conferences/annual/2005/highlights.cfm5. Delbanco, A. “The renewal of literature: Emersonian reflections”, The New Republic, Review of book, “Renewal of literature: Emersonian reflections” by Poirier, Richard, 1987, Retrieved April 15, 2005 from http://galenet.galegroup.com6. Edmundson, M. “Why read?” Bloomsburg, 2004, pp 5 and 297. Ultimate Success Quotations Library, 1997. Retrieved April 15, 2005 from http://creativequotations.com8. Wilson, F. “Emerson” Review of two books, “Emerson” by Lawrence Buell & “Emerson” by Kenneth S. Sacks, July 8, 2003. Retrieved April 15, 2005 from http://galenet.galegroup.com9. Director, S. “2020: It’s sooner than you think.” ASEE PRISM, Vol. 14, No. 4, January 200510. McGown, J

Conference Session

Novel Measurement Experiments

Collection

2006 Annual Conference & Exposition

Authors

Terrance Lovell, Pennsylvania State University-Berks; Dale Litwhiler, Pennsylvania State University-Berks

Tagged Divisions

Instrumentation

Page 11.1196.7The IMAQ Read LCD VI is which also comes with LabVIEW’s VISION software then uses theROI for each seven segment display to determine each segments status and digit. This ispreformed by doing three edge detections, two horizontal and one vertical. The horizontal edgedetections are preformed at 1/3 and 2/3 the height of the ROI to determine if the verticalelements are active. The vertical edge detection search is preformed to determine if thehorizontal elements are active.6 Figures 9 shows the LabVIEW DMM Reader VI front panel.Notice that the proper reading is extracted despite considerable reflected glare on the displaycover. Figure 10 show the front panel and block diagram respectively for the DMM Reader VI

Conference Session

New Topics in IE Education

Collection

2006 Annual Conference & Exposition

Authors

Kim Needy, University of Pittsburgh

Tagged Divisions

Industrial Engineering

requiring students to consider an engineering solution within a societalcontext, students were assigned to read a Harvard Business Review case entitled Taking theCake.6 In this case, Southland Bakery is considering radically changing their strategic plan tostop producing bakery products drenched in trans fats to address the growing concern of obesity,especially with respect to obesity in children. Students are asked to reflect upon the societalimpacts of this dilemma and whether Southland Bakery has any social obligation to produce amore health conscious product. This case strikes the emotion of much of the class with opinionsat both extremes, i.e., it is the company's duty to do what they can to prevent obesity, to it is the

Conference Session

Practice/Partnership/Program Issues

Collection

2006 Annual Conference & Exposition

Authors

Jeong Woo; Robert Johnson, Texas A&M University; Mark Clayton, Texas A&M University

Tagged Divisions

Architectural

because of the following factors: overhead required to capture; limitedknowledge; poor IT infrastructure of organizations.Sharing Tacit Design Knowledge with CMC technologiesSome researchers in the field of architecture have rigorously studied the importance of sharingtacit design knowledge sharing. Various terminologies for tacit knowledge have been adopted:visual analogy1, episodic knowledge9, reflective practice8, personal knowledge2, expertknowledge1, and strategic knowledge5.Due to the development of emerging CMC technologies and geographically dispersed businessenvironments, the use of CMC has been inevitably accepted. Face-to-face meeting is now beingrecognized as too costly in terms of time and expense. CMC research has focused on

Conference Session

FPD7 -- Service Learning

Collection

2006 Annual Conference & Exposition

Authors

David Kazmer, University of Massachusetts-Lowell; John Duffy, University of Massachusetts-Lowell; Beverly Perna, Tsongas Industrial History Center

Tagged Divisions

First-Year Programs

impact on student motivation and success.2. IntroductionEngineering education seems to have come under increased criticism lately, with manycompanies and students arguing that engineering curricula are too abstract and disconnected [1,2]. It is interesting to reflect upon similar concerns of Henderson [3] and Grinter [4] dating backto 1983 and even 1955. These studies consistently indicate that engineering education shouldhave the following properties: 1. Relevance to the lives and careers of students, preparing them for a broad range of careers, as well as for lifelong learning involving both formal programs and hands-on experience; 2. Attractiveness so that the excitement and intellectual content of engineering will

Conference Session

Electrical and Computer Division Technical Session 8

Collection

2017 ASEE Annual Conference & Exposition

Authors

Andrew Rusek, Oakland University; Subramaniam Ganesan, Oakland University

Tagged Topics

Diversity

Tagged Divisions

Electrical and Computer

signal of Vsource3Fig.2a Circuit to simulate Noise Signal.Circuits to simulate the noise signal, which could be tested and also added to desired signals todemonstrate effects of it on the circuit operation and on the signal distortions were modeled.Time-domain signal, signal distortions are studied. Fig.2b The pulses generated by adding different noise signal to the pulsesFig.3 The circuits used to demonstrate the pulse reflections in transmission lines. Upper circuit isused to simulate and ideal case when the source and load resistances are matched to thecharacteristic impedance of the transmission line. The lower circuit has both resistancesunmatched to the characteristic impedance of the transmission line. The harmonic signalcomponents

Conference Session

Mathematics Division Technical Session 2

Collection

2017 ASEE Annual Conference & Exposition

Authors

Angeles Dominguez, Tecnologico de Monterrey, Monterrey, Mexico, and Universidad Andres Bello, Santiago, Chile; Genaro Zavala, Tecnologico de Monterrey, Monterrey, Mexico, and Universidad Andres Bello, Santiago, Chile; Maria Elena Truyol, Universidad Andrés Bello, Santiago, Chile

Tagged Topics

Diversity

Tagged Divisions

Mathematics

first day of class (text in black) and follow-up process during the entire semester (text in green). Adapted from [11].The PD process (Figure 2) is called a cycle because it consists of a few elements that arerepeated11. The description of each element is taken from Ho et al (2001, p.147)12:  Self-reflections: Instructors “undergo self-reflection and clarify personal conceptions.” In this study, all three reflections occurred prior to the first day of class.  Exposures: Workshop facilitators “provide a direction and a model for improvement.” Exposure 1 and Exposure 2 occurred prior to the first day of class, whereas Exposure 3 occurred during the semester.  Confrontations: Instructors “are brought to realize

Conference Session

Nontraditional Teaching Approaches

Collection

2017 ASEE Annual Conference & Exposition

Authors

Eugene Rutz, University of Cincinnati

Tagged Divisions

International

:  Assessments and Background Materials  Communication  Global Work Groups  Motivation  Leadership  Resilience  Work / Life BalanceContent in the modules is presented through videos and readings available in a LearningManagement System (LMS). Interaction in the course is facilitated through email and weeklydiscussion board posts. Students are required to write reflective papers approximately everyother week. Three short online tests are also part of the assessment used in the course. There isno final examination, rather there is a final reflective writing assignment.While all content, assignments, and instructions are available through the LMS, the instructorsends a weekly email message to all students informing them of the

Conference Session

Entrepreneurship and Innovation: Beyond the University

Collection

2017 ASEE Annual Conference & Exposition

Authors

Laura Hirshfield, University of Michigan; Aileen Huang-Saad, University of Michigan; Julie Libarkin, Michigan State University

Tagged Divisions

Entrepreneurship & Engineering Innovation

model, sketch, or 3D representation23,26,27 Conduct experiments Running tests to consider hypotheses, gain new information and learn “how prototypes behave”23 Revise and iterate Revisiting the design, using new information or feedback23 Reflect on the process Thinking about challenges, failures, and successes; considering what contributed to or hindered

Conference Session

Encouraging Students to Think Critically

Collection

2017 ASEE Annual Conference & Exposition

Authors

Aaron W. Johnson, University of Michigan; Cynthia J. Finelli, University of Michigan

Tagged Divisions

New Engineering Educators

students’ engineering designs.Other research has focused on teachers’ ability to notice and respond to student thinking inengineering. Mangiante & Moore (2016) investigated what pre-service teachers (i.e.undergraduate students studying education) new to engineering attended, analyzed, andresponded to when working with fourth grade students during engineering activities. The authorsanalyzed written reflections from the pre-service teachers and assessed their attention to threedisciplinary practices—defining the engineering problem, designing solutions, and optimizingsolutions (NGSS Lead States, 2013)—as having a low, medium, or high focus on studentthinking. The authors found that the pre-service teachers had more sophisticated reflectionsabout

Conference Session

Engineering Economy Division Technical Session 2

Collection

2017 ASEE Annual Conference & Exposition

Authors

Kate D. Abel, Stevens Institute of Technology (School of Engineering and Science)

Tagged Divisions

Engineering Economy

comparing the final exam and course scores of the Fall 2015students (those who were just told that electronics were not allowed in the classroom) tothe final exam and course scores (respectively) of students from the Fall of 2016 (thosewho were told electronics were not allowed since studies show use of electronics in theclassroom negatively impacts grades). These two grades were chosen intentionally. Thefinal exam score was chosen since it reflects how well students understand the materialfrom the entire course (but does not include the grades from the lab portion of the course).The course score was chosen for contrast since this score reflects both the course portion(where the study took place) and the lab portion of the course.Data AnalysisThe

Conference Session

Women in Engineering Division Technical Session 7

Collection

2017 ASEE Annual Conference & Exposition

Authors

Kelsey Morgan Irvin, University of Missouri, Columbia; Elizabeth Hiteshue, Bain & Company; Samantha Laurel Swanson; Caroline Missouri Wochnick, Augsburg College; Hannah Bech, AmeriCorps VISTA; Amanda Marie Kapetanakis, Augsburg College; Mary Yvonne Lanzerotti, Air Force Institute of Technology; Derrick Langley, Space and Missile Center, Enterprise Ground Services Office (SMC/ADZS); Michael Geselowitz, IEEE History Center at Stevens Institute of Technology; MaryAnn C. Hellrigel, IEEE, IEEE History Center; Gregory Alan Good, American Institute of Physics

Tagged Topics

Diversity

Tagged Divisions

Women in Engineering

participatingstudents graduated with a STEM degree. Interviews collected in this project are previouslypublished on the IEEE Engineering Technology and History Wiki (ETHW). Following the oralhistory interviews, the students write reflections to answer the following three research questions(RQ). RQ#1 is “What are the key factors that led to the success of the distinguished leaders?.”RQ#2 is “What are the crucial skills that enabled their success?.” RQ#3 is “What is the impacton my career path?”One objective of this paper is for the participating female students, who are majoring in STEMfields, to present their reflections on the three research questions. A second objective is for thestudents to describe the impact, if any, that carrying out interviews of

Conference Session

Key Educational & Professional Issues of Strategic Importance to the Civil Engineering Profession - and ASCE

Collection

2019 ASEE Annual Conference & Exposition

Authors

Stephen J. Ressler P.E., U.S. Military Academy; Thomas A. Lenox Dist.M.ASCE, F.ASEE, American Society of Civil Engineers

Tagged Divisions

Civil Engineering

through March2018, the ultimate goal of the initiative was to change state licensure laws, such that a master’sdegree or equivalent would become the academic prerequisite for licensure as a professionalengineer in the U.S. [1]During this period, the RTB initiative made substantial progress, as reflected in the followingaccomplishments: • In 2004, ASCE published the Civil Engineering Body of Knowledge (CE-BOK)—a landmark document that, for the first time ever, articulated the knowledge, skills, and attitudes required for entry into the practice of civil engineering at the professional level [2]. • In 2008 [3] and 2019 [4], ASCE published CE-BOK updates that improved the document’s usability and addressed changes in

Conference Session

Environmental Engineering Division Technical Session 1

Collection

2019 ASEE Annual Conference & Exposition

Authors

Daniel B. Oerther, Missouri University of Science & Technology

Tagged Divisions

Environmental Engineering

developed by the Internal Council on Systems Engineering is usedthroughout the course, and sustainable development reflected by a balanced appreciation forpeople, planet, and prosperity is utilized as a common theme.Course Delivery. This course includes: a blended format; a flipped classroom; mastery learning;and a buffet of optional summative assessments used to assign a final grade13. Briefly, contentdelivery via both online digital media and via face-to-face lecture is known as a ‘blendedformat’, and some of the benefits include accommodating diverse learning styles (i.e., listeningor reading) while improving student satisfaction with content delivery14,15. A ‘flippedclassroom’ enhances the opportunity to use inductive learning strategies (i.e

Conference Session

Experimentation and Laboratory-oriented Studies Division Technical Session 3

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Eleanor Byrnes, Harvey Mudd College; Yaqub Alam Mahsud, Harvey Mudd College; Spencer Rosen, Harvey Mudd College; Matthew Spencer, Harvey Mudd College

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

study, and the best thirty from each category were retained foranalysis. Class descriptions were extracted from these documents, and these descriptions werecategorized into multiple categories reflecting the many types of laboratory experiences studentscan have: no laboratory component, traditional in-lab hardware experiences, software-basedlaboratories ​[4]​, take home lab kits ​[5]​, mixed studio-lecture courses ​[6]​, or other laboratoryexperiences.The hypothesis of this study was that both engineering discipline and school rank would drivesignificant differences in the number of laboratories a program offered because EE and ME havevery different capital requirements for laboratory classes, and resources are one explicit aspect ofschool

Conference Session

ET Pedagogy II

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Barbara L. Christe, State University of New York

Tagged Topics

Diversity

Tagged Divisions

Engineering Technology

development and reflection on diversity as an ethical underpinning ofprofessionalism.Ethical challenges or discussions often lack binary decisions. Many times, no single "correct"solution exists. Typically, one can identify a range of solutions that are clearly wrong and arange of solutions that are better than others. This range of responses is opposite to the "checkthe answer in the back of the book" instruction in circuit analysis or other engineeringtechnology coursework. Some students find this aspect of ethics personally challenging.Offering students a case study that is directly associated with the engineering profession yields acontext-based discussion far more valuable and productive as students develop their professionalidentity. The

Conference Session

NSF Grantees: Faculty Development 1

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Karin Jensen, University of Illinois at Urbana - Champaign; Joseph F. Mirabelli, University of Illinois at Urbana - Champaign; Kelly J. Cross, University of Nevada, Reno; Allyson Jo Barlow, University of Nevada, Reno

Tagged Topics

NSF Grantees Poster Session

and diversificationof the engineering education community and bridge the gap between research and practice. Thecurrent work describes an effort to assess the needs of both mentors and mentees in EER andpreliminary work to build community for the NSF PFE: RIEF program.MethodInstitutional Review Board approval was obtained for the study. In the fall of 2019, a briefsurvey was distributed to current and past RIEF grant awardees (PIs and co-PIs that wereidentified from the NSF award database). In addition to providing background information abouttheir project (role, current or completed project), participants were asked to reflect on thefollowing questions: • What support from the RIEF community would benefit you and your work? • What