Conference Session

Incorporating Projects into the Curriculum

Collection

2006 Annual Conference & Exposition

Authors

Shanzhong (Shawn) Duan, South Dakota State University; Li Qian, South Dakota State University; Teresa Hall, South Dakota State University

Tagged Divisions

Mechanical Engineering

. This new course has addressed the need for engineering design linkedto manufacturing. To make the course substantially fulfill its role of a bridge between the designcurriculum and manufacturing curriculum, the course outcomes have been tied to the students’senior design projects. Student surveys and course assessments indicate that the course plan anddesign provides a promising solution to the need for integration between design curriculum andmanufacturing curriculum.IntroductionDesign curriculum and manufacturing curriculum are two key subject areas in many engineeringprograms. Specific requirements in curricula may vary, but they encounter similar issues andchallenges as far as design concept through final manufacturing production is

Conference Session

Mechanical/Manufacturing ET Design Projects

Collection

2006 Annual Conference & Exposition

Authors

Gary Drigel, Miami University

Tagged Divisions

Engineering Technology

2006-550: FROM PROJECT PLANNING TO NATIONAL CHAMPION - BUVDESIGN, BUILD AND WINGary Drigel, Miami University Gary Drigel is an Assistant Professor in the Engineering Technology Department at Miami University (Ohio). He received his Bachelor of Science Degree (1973) and Masters Degree (1980) in Metallurgical Engineering from the University of Cincinnati. He has also completed all his course work and part of his thesis work for a Ph.D. in Materials Engineering at UC. Gary is a Registered Professional Engineer in the State of Ohio. He has 30 years of engineering and research experience gained at Armco Research and Technology in Middletown, Ohio and has been a professor at Miami

Conference Session

Mechanical/Manufacturing ET Design Projects

Collection

2006 Annual Conference & Exposition

Authors

Noel Titus, Purdue University; Margaret Ratcliff, Purdue University-Columbus/SE Indiana

Tagged Divisions

Engineering Technology

2006-809: DESIGN AND SPECIFICATION CLASS TEAMING WITH ALCOA INREAL WORLD DESIGN PROJECTMargaret Ratcliff, Purdue University-Columbus/SE Indiana Margaret Ratcliff is an Assistant Professor in Mechanical Engineering Technology at Purdue University College of Technology in Columbus, Indiana and has been there since January 2005. Before joining Purdue University at Columbus, she spent 11 years in industry working mostly as a Product Design Engineer, Senior Project Engineer, and Structural Analyst. She earned a M.S. degree in Mechanical Engineering from Texas A&M University and a B.S. degree in Mechanical Engineering from Tulane University.Noel Titus, Purdue University Noel Titus is

Conference Session

Projects in Manufacturing Curriculum

Collection

2017 ASEE Annual Conference & Exposition

Authors

Michael G. Mauk, Drexel University; Richard Chiou, Drexel University (Eng. & Eng. Tech.); Shraman Kadapa, Drexel University (Eng. & Eng. Tech.); Tzu-Liang Bill Tseng, University of Texas, El Paso

Tagged Divisions

Manufacturing

assistant in the mechanical and mechatronics lab at Drexel. He is also a researcher in Scalable Autonomous Systems Lab. His research interests are mainly in robotics which include motion planning and localization of ground robots.Prof. Tzu-Liang Bill Tseng, University of Texas, El Paso Dr. Tseng is a Professor and Chair of Industrial, Manufacturing and Systems Engineering at UTEP. His research focuses on the computational intelligence, data mining, bio- informatics and advanced manu- facturing. Dr. Tseng published in many refereed journals such as IEEE Transactions, IIE Transaction, Journal of Manufacturing Systems and others. He has been serving as a principle investigator of many research projects, funded by NSF, NASA

Conference Session

Projects in Manufacturing Curriculum

Collection

2017 ASEE Annual Conference & Exposition

Authors

Michael G. Mauk, Drexel University; Richard Chiou, Drexel University (Eng. & Eng. Tech.); Irina Nicoleta Ciobanescu Husanu, Drexel University (Tech.); David English; Michael Naceri Hazm

Tagged Divisions

Manufacturing

experience in curriculum development. Dr Husanu developed laboratory activities for Measurement and Instrumentation course as well as for quality control undergraduate and graduate courses in ET Masters program. Also, she introduced the first experiential activity for Applied Mechanics courses. She is coordinator and advisor for capstone projects for Engineering Technology.Mr. David English David English received and Associate in Electrical Technology Degree from New England Institute of Technology, presently David is about to complete his Electrical Engineering in Technology Degree from Drexel University. David has been employed in the power generation field for the past 10 years. The facility where David is presently

Conference Session

Design & Development Projects and Practices

Collection

2017 ASEE Annual Conference & Exposition

Authors

Gavin Garner, University of Virginia

Tagged Divisions

Manufacturing

Paper ID #20101Designing Electric Guitars to Teach Mechatronics and Advanced Manufac-turing TechniquesDr. Gavin Garner, University of Virginia Gavin Garner holds a bachelor’s degree in Physics from Colby College and Master’s and Ph.D. degrees in Mechanical and Aerospace Engineering from the University of Virginia. His primary area of expertise lies in the burgeoning field of Mechatronics (aka robotics). Over the past decade, he has built UVA’s Mechatronics program from scratch, developing over 50 hours of unique laboratory experiments as well as dozens of open-ended design projects. Through this experience, he has gained

Conference Session

Energy Efficiency and Capstone Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

Frank Wicks, Union College

Tagged Topics

Diversity

Tagged Divisions

Energy Conversion and Conservation

Paper ID #20574Developing Relevant and Practical Projects for a Senior Capstone ThermalFluids Design CourseDr. Frank Wicks, Union College Frank Wicks is a member of the mechanical engineering department at Union College in Schenectady. He has served all positions including chair of the Energy Conversion and Conservation Division. He is an ASME Fellow and frequent contributor to Mechanical Engineering magazine. He holds a BMarineE from SUNY Maritime College, a MSEE from Union College and PhD from Rensselaer and is a licensed professional engineer. He is the inventor of the Electricity Producing Condensing Furnace and also

Conference Session

Design & Development Projects and Practices

Collection

2017 ASEE Annual Conference & Exposition

Authors

Mingshao Zhang, Southern Illinois University, Edwardsville; Zhou Zhang, Stevens Institute of Technology (School of Engineering and Science); Nima Lotfi, Southern Illinois University, Edwardsville; Sven K. Esche, Stevens Institute of Technology (School of Engineering and Science)

Tagged Divisions

Manufacturing

) Sven Esche is a tenured Associate Professor at the Department of Mechanical Engineering at Stevens Institute of Technology. He received a Diploma in Applied Mechanics in 1989 from Chemnitz University of Technology, Germany, and was awarded M.S. and Ph.D. degrees from the Department of Mechanical Engineering at The Ohio State University in 1994 and 1997, respectively. He teaches both undergraduate and graduate courses related to mechanisms and machine dynamics, integrated product development, solid mechanics and plasticity theory, structural design and analysis, engineering analysis and finite element methods and has interests in remote laboratories, project-based learning and student learning assessment. His

Conference Session

Energy Efficiency and Capstone Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

Irina Nicoleta Ciobanescu Husanu, Drexel University; Richard Chiou, Drexel University

Tagged Divisions

Energy Conversion and Conservation

and graduate courses in ET Masters program. Also, she introduced the first experiential activity for Applied Mechanics courses. She is coordinator and advisor for capstone projects for Engineering Technology.Dr. Richard Chiou, Drexel University Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different engineering and technology courses at undergraduate and graduate

Conference Session

Projects in Manufacturing Curriculum

Collection

2017 ASEE Annual Conference & Exposition

Authors

Roby Lynn; Kathryn W. Jablokow, Pennsylvania State University, Great Valley; Christopher Saldana; Thomas Marshall Tucker, Tucker Innovations; Thomas Kurfess, Georgia Institute of Technology

Tagged Divisions

Manufacturing

Conference Session

Energy Efficiency and Capstone Projects

Collection

2017 ASEE Annual Conference & Exposition

Authors

David McDonald P.E., Lake Superior State University

Tagged Divisions

Energy Conversion and Conservation

vehicle market in the world, with more than13 million motor vehicles sold in 2009. China used to be self-sufficient in oil supplies, but isnow estimated to import 40% of its oil consumption.(1) Other industrialized countries such asJapan, Germany, India and Brazil have seen tremendous growth in car sales.The history and projections of oil demand and production support the belief of the theory of peakoil at the present time. Basically, the theory predicts that oil production is at its peak in history,and will soon be below oil demand and possibly create an energy crisis.(1) Economic growth (1)relies heavily on energy supply. Emissions from fossil fuel are the primary source of GreenHouse Gas.(1) The emissions of a

Conference Session

Capstone/ET Projects II - General

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Avimanyu Sahoo, Oklahoma State University; Aaron Alexander, Oklahoma State University; Jeeyeon Hahn, Oklahoma State University

Tagged Topics

Diversity

Tagged Divisions

Engineering Technology

Division of Engineering Technology at Oklahoma State University, Engineering North, Room 524, Stillwater, OK 74078; jeeyeon.hahn@okstate.edu. c American Society for Engineering Education, 2020Exposure of Engineering Technology Students to Cutting-edge Technology: A Multi-Major Senior Design ExperienceAbstract:Engineering Technology (ET) programs focus on the hands-on approach to engineeringeducation. To keep pace with the rapid growth of industrial technology in the area of automationand artificial intelligence, ET programs need to introduce students to cutting-edge hands-oninterdisciplinary project experiences. In this paper, such a pilot project is discussed where ETstudents at Oklahoma State

Conference Session

Design & Development Projects and Practices

Collection

2018 ASEE Annual Conference & Exposition

Authors

Michael G Mauk P.E., Drexel University; Richard Chiou, Drexel University (Eng. & Eng. Tech.); Carlos Michael Ruiz, Drexel University (Eng. & Eng. Tech.); Carol Jeanice Martin; Smarth H Chadha, Drexel University (Eng. & Eng. Tech.)

Tagged Divisions

Manufacturing

merit coverage in undergraduate STEM education.Moreover, photovoltaic solar cells and related supporting science and technology are readily-accessible and effective vehicles for interdisciplinary instruction in optics, semiconductormaterials and electronic devices. In addition, thermal imaging of solar cells (in operation)provides convenient demonstrations of the practice and utility of infrared cameras for research,process control, and quality assurance. Here we report student projects to develop solar cellanalysis and diagnostics techniques that are instructive introductions to solar cells and theiroperation.Improvements in solar cell performance and reductions in manufacturing cost will foster evenwider use of solar cells. These aims are

Conference Session

Design & Development Projects and Practices

Collection

2018 ASEE Annual Conference & Exposition

Authors

Richard Chiou, Drexel University (Eng. & Eng. Tech.); Michael G Mauk P.E., Drexel University; Tzu-Liang Bill Tseng, University of Texas, El Paso; Sanjay Jayadev, Drexel University (Eng. & Eng. Tech.); Carlos Michael Ruiz, Drexel University (Eng. & Eng. Tech.)

Tagged Divisions

Manufacturing

Paper ID #23940Enhanced 3-D Printing for Energy Harvesting Project Implementation intoGreen Energy Manufacturing LaboratoryDr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different engineering and technology

Conference Session

Capstone Projects in Manufacturing

Collection

2018 ASEE Annual Conference & Exposition

Authors

Irina Nicoleta Ciobanescu Husanu, Drexel University (Tech.); Michael G Mauk P.E., Drexel University; Perry B. Gold; Nando Tyler Orfanelli

Tagged Divisions

Manufacturing

Paper ID #23634From Capstone Student-led Project to Experiential Learning Module: Designand Manufacturing of an Integrated System of Pico-Hydroelectric Generatorand Water FiltrationDr. Irina Nicoleta Ciobanescu Husanu, Drexel University (Tech.) Irina Ciobanescu Husanu, Ph. D. is Assistant Clinical Professor with Drexel University, Engineer- ing Technology program. Her area of expertise is in thermo-fluid sciences with applications in micro- combustion, fuel cells, green fuels and plasma assisted combustion. She has prior industrial experience in aerospace engineering that encompasses both theoretical analysis and experimental

Conference Session

Hands-On Projects and Demos

Collection

2018 ASEE Annual Conference & Exposition

Authors

Jacob James Elmer, Villanova University; Daniel Adam Kraut, Villanova University

Tagged Divisions

Chemical Engineering

:2452341) and printed. However,the students can also be challenged to modify the plate designs (e.g., add corrugations to induceturbulence and increase heat transfer) in a drafting program like SolidWorks. Either way, theprinted plates can be assembled and used to transfer heat between streams of hot (< 40oC) and cold(~4oC) water, but additional equipment is required (pumps, tubing, and thermocouples). In themost advanced iteration of this project, thermocouples can be attached to an Arduino thatautomatically records the stream temperatures.Overview While there are many different modes of heat transfer, including conduction, convection,and radiation, most chemical engineers are primarily concerned with the transfer between twoliquid

Conference Session

Capstone Projects in Manufacturing

Collection

2018 ASEE Annual Conference & Exposition

Authors

Richard Chiou, Drexel University (Eng. & Eng. Tech.); Michael G Mauk P.E., Drexel University; Carlos Michael Ruiz, Drexel University (Eng. & Eng. Tech.)

Tagged Topics

Diversity

Tagged Divisions

Manufacturing

Paper ID #23970A Senior Design Project in Fabrication of Microfluidic HIV/Zika Viral Loadand Monitoring Test Chips through Manufacturing ProcessesDr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different

Conference Session

Design & Development Projects and Practices

Collection

2018 ASEE Annual Conference & Exposition

Authors

Michael G Mauk P.E., Drexel University; Richard Chiou, Drexel University (Eng. & Eng. Tech.); Prashant Yadav

Tagged Divisions

Manufacturing

Paper ID #23900An Engineering Education Project: Using a Robot and Thermal Imaging toAutomate and Analyze Ultrasonic Welding of PlasticsDr. Michael G Mauk P.E., Drexel University Michael Mauk is Assistant Professor in Drexel University’s Engineering Technology program.Dr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an

Conference Session

Hands-On Projects and Demos

Collection

2018 ASEE Annual Conference & Exposition

Authors

Anthony Butterfield, University of Utah; Katrina My Quyen Le, AMES High School; Kerry Kelly, University of Utah; Pascal Goffin, University of Utah; Thomas Becnel, University of Utah ; Pierre-Emmanuel GAILLARDON, University of Utah

Tagged Topics

Diversity

Tagged Divisions

Chemical Engineering

c American Society for Engineering Education, 2018 Citizen Scientists Engagement in Air Quality MeasurementsAbstract:Citizen scientist efforts, wherein members of the public who are not professional scientistsparticipate in active research, have been shown to effectively engage the public in STEM fieldsand result in valuable data, essential to answering pressing research questions. However, mostcitizen scientist efforts have been centered in colleges of science, and a limited number havecrossed into research areas important to chemical engineering fields. In this work we report onthe results of a project to recruit high school and middle school students across Utah’s Salt LakeValley as citizen scientists and potential engineering

Conference Session

Mentoring Practices and Project Teams

Collection

2018 ASEE Annual Conference & Exposition

Authors

Catherine E. Brawner, Research Triangle Educational Consultants; Olivia W. Murch, Purdue University ; Daniel M. Ferguson, Purdue University, West Lafayette (College of Engineering); Matthew W. Ohland, Purdue University, West Lafayette (College of Engineering)

Tagged Divisions

Educational Research and Methods

on creating diverse teams and allowing self andpeer evaluations [2]. Teamwork skills in our study are defined and measured as the dimensionsof teamwork in the CATME.CATME includes five common measures of teamwork behavior on which team members areasked to rate themselves and their teammates using a behaviorally anchored rating scale on eachdimension. These teamwork dimensions fall into 5 categories:  Contributing (C) to the Team’s Work is being able to add value to a team’s work/project. Team members are rated on how well they meet their commitments, do their share of the work, and help their teammates.  Interacting (I) with Teammates refers to how individuals communicate within their teams. It

Conference Session

Mentoring Practices and Project Teams

Collection

2018 ASEE Annual Conference & Exposition

Authors

Ying Cao, Oregon State University; Christina Smith, Brown University; Benjamin David Lutz, Oregon State University; Milo Koretsky, Oregon State University

Tagged Divisions

Educational Research and Methods

in specific courses in the core curriculum to the more complex, authentic problems and projects they face as professionals. Dr. Koretsky is one of the founding members of the Center for Lifelong STEM Education Research at OSU. c American Society for Engineering Education, 2018 Cultivating the Next Generation: Outcomes from a Learning Assistant Program in EngineeringIntroductionA growing tension in higher education in science, technology, engineering, and mathematics(STEM) disciplines is the need to produce a greater number of STEM graduates [1] whilemaintaining learning effectiveness in the resulting large-enrollment STEM courses. One way tomitigate this tension is to create

Conference Session

Design & Development Projects and Practices

Collection

2017 ASEE Annual Conference & Exposition

Authors

Jahangir Ansari, Virginia State University

Tagged Divisions

Manufacturing

Design and Development of a Novel Wheelchair with Lifting and Flattening CapabilitiesAbstract:Autonomy in the area of mobility has always been highly valued, but is sometimes impaired by adisability. In many cases, this results in reliance on some form of external supporting mechanism.Wheelchair users may encounter a variety of obstacles in their daily activities based on theirlimitations. An optimum quality of life can be achieved through more freedom in mobility. Thepurpose of this project is to design and build a manual wheelchair equipped with assistive flatteningand lifting mechanisms to elevate the user to a target level.The mechanism is based on a scissor lift connected to the respective footrest, seat, and

Conference Session

Design & Development Projects and Practices

Collection

2017 ASEE Annual Conference & Exposition

Authors

Sheng-Jen Hsieh, Texas A&M University

Tagged Divisions

Manufacturing

Arduino with MicroLogix 1000 Series PLC Arduino MicroLogix 1000 Cost Low: around $20-$40 High: around $500-$700 Operating voltage 3.3V, 5V 24V, 110V Programming C / C++ Ladder logic language Application Amateur. Industrial Can be used for hobby or Focus is on industry-level small scientific projects for I/O manipulation quick deployment Flexibility High Moderate Reliability

Conference Session

Mentoring Practices and Project Teams

Collection

2018 ASEE Annual Conference & Exposition

Authors

Suzette R. Burckhard P.E., South Dakota State University; Joanita M. Kant, South Dakota State University; Gregory J. Michna, South Dakota State University; Ross Peder Abraham, South Dakota State University; Richard Reid P.E., South Dakota State University

Tagged Divisions

Educational Research and Methods

on Pine Ridge Reservation and ethnographic research on Rosebud Reservation. That reservation research is part of an ongoing National Science Foundation (NSF)-sponsored Pre-Engineering Education Collabora- tive led by Oglala Lakota College (a tribal college) in cooperation with South Dakota School of Mines and Technology, and SDSU. She has recently served as a principal investigator for a South Dakota Space Grant Consortium project designed to create interest in STEM education and careers among high school girls at Flandreau Indian School. She has publications in peer-reviewed regional conference proceedings and international journals and has recently co-edited a book about bringing engineering to Native Hawai

Conference Session

Mentoring Practices and Project Teams

Collection

2018 ASEE Annual Conference & Exposition

Authors

Suzette R. Burckhard, South Dakota State University; Joanita M. Kant, South Dakota State University; Francis Arpan; Ross Peder Abraham, South Dakota State University; Gregory J. Michna, South Dakota State University

Tagged Divisions

Educational Research and Methods

conducted research into heavy metals concentrations in plants and soils on Pine Ridge Reservation and ethnographic research on Rosebud Reservation. That reservation research is part of an ongoing National Science Foundation (NSF)-sponsored Pre-Engineering Education Collabora- tive led by Oglala Lakota College (a tribal college) in cooperation with South Dakota School of Mines and Technology, and SDSU. She has recently served as a principal investigator for a South Dakota Space Grant Consortium project designed to create interest in STEM education and careers among high school girls at Flandreau Indian School. She has publications in peer-reviewed regional conference proceedings and international journals and has recently

Conference Session

Capstone Projects in Manufacturing

Collection

2018 ASEE Annual Conference & Exposition

Authors

Richard Chiou, Drexel University (Eng. & Eng. Tech.); Michael G Mauk P.E., Drexel University; Tzu-Liang Bill Tseng, University of Texas, El Paso; Carlos Michael Ruiz, Drexel University (Eng. & Eng. Tech.); Jean Carlo Espaillat; Senyu Wang

Tagged Divisions

Manufacturing

Paper ID #23936Student Project: Instrumentation and Control of Solar-Powered Algae Biore-actorDr. Richard Chiou, Drexel University (Eng. & Eng. Tech.) Dr. Richard Chiou is Associate Professor within the Engineering Technology Department at Drexel Uni- versity, Philadelphia, USA. He received his Ph.D. degree in the G.W. Woodruff School of Mechanical Engineering at Georgia Institute of Technology. His educational background is in manufacturing with an emphasis on mechatronics. In addition to his many years of industrial experience, he has taught many different engineering and technology courses at undergraduate and

Conference Session

Capstone Projects in Manufacturing

Collection

2018 ASEE Annual Conference & Exposition

Authors

Daniel R Khodos; David I Adegbesan, Vaughn College of Aeronautics and Technology; Oliver Khairallah; Shouling He, Vaughn College of Aeronautics & Technology

Tagged Divisions

Manufacturing

Engineering Department, Vaughn College, Flushing, NY Email: shouling.he@vaughn.eduABSTRACTIn this project, the Mechatronics Engineering students from the Department of Engineering andTechnology at a college in the northeastern region of the United States have developed aninnovative robotic vacuuming system. The system consists of two Omni-drive robots: a SlaveRobot (SR) and a Master Robot (MR). The SR works independently. It sweeps dust and dirt fromfloor surfaces, including the corners of a room, beneath cabinets, or behind tables and otherfurniture. Additionally, it sends information/data to the MR. The MR computes an efficient pathto vacuum dust and dirt in the sections of the room based on the information/mapping

Conference Session

Hands-On Projects and Demos

Collection

2018 ASEE Annual Conference & Exposition

Authors

Lucas James Landherr, Northeastern University; Courtney Pfluger, Northeastern University; Ryan A Koppes, Northeastern University

Tagged Divisions

Chemical Engineering

Paper ID #22563The River Project: an Open-Ended Engineering Design Challenge from Bench-Scale to Pilot-ScaleDr. Lucas James Landherr, Northeastern University Dr. Lucas Landherr is an associate teaching professor in the Department of Chemical Engineering at Northeastern University, conducting research in engineering education.Dr. Courtney Pfluger, Northeastern University Dr. Courtney Pfluger received her Doctoral degree in Chemical Engineering from Northeastern University in 2011. In the fall of 2011, she took a position as an Assistant Teaching Professor at Northeastern University in the College of Engineering as a part of

Conference Session

Capstone and Design Projects

Collection

2016 ASEE Annual Conference & Exposition

Authors

Loryn R. Becker, Michigan Technological University; Ted J. Wierzba, Michigan Technological University; Mohsen Azizi, Michigan Technological University; Aleksandr Sergeyev, Michigan Technological University; Ebrahim Tarshizi, Michigan Technological University; Laura Claire O'Connor, Michigan Technological University; Ryan J. Livernois, Michigan Technological University

Tagged Topics

Diversity

Tagged Divisions

Engineering Technology

Department of Geological and Mining Engineering and Sciences Michigan Technological University, Houghton, Michigan, USA *{sazizi, avsergue, tarshizi}@mtu.eduAbstractThe objective of this project is to facilitate the use of automation in an underground miningenvironment. In an active underground mine, there are several hazards a worker can face. Theimplementation of autonomous control of the mobile equipment used in these mining operationsis one of the ways to cut down the number of injuries. It can also result in less time wasted for theworkers as well as an overall safer mining environment. With autonomous vehicles in undergroundmines, it is less likely for accidents to occur involving mine

Conference Session

Capstone and Design Projects

Collection

2016 ASEE Annual Conference & Exposition

Authors

Honghong Liu; Gene Yeau-Jian Liao, Wayne State University; Chih-Ping Yeh, Wayne State University; Jimmy Ching-ming Chen, Wayne State University

Tagged Divisions

Engineering Technology

developing formal degree programs and professional development programs for incumbent engineers, community college instructors, and high school science and technology teachers. He is the PI and co-PI of several federal and state funded projects for course, curriculum and laboratory development in advanced automotive technology.Dr. Jimmy Ching-Ming Chen, Wayne State University Assistant Professor 2015-present Wayne State University Ph.D 2006 Texas A&M University c American Society for Engineering Education, 2016 Automatic Parking Vehicle SystemAbstractVehicle automation, autonomy and connectivity is a subject of mechatronics integrating manyengineering disciplines including