Conference Session

Experimentation and Laboratory-Oriented Studies Division Technical Session 6

Collection

2019 ASEE Annual Conference & Exposition

Authors

Joseph P. Fuehne P.E., Purdue Polytechnic Institute

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Air Force base in California. During graduate school, Dr. Fuehne focused his efforts on finite element analysis of laminated compos- ite materials. After graduate school, Dr. Fuehne spent seven years in Houston, Texas, working for the Cooper Cameron Corporation doing finite element analysis on oil field equipment. From 1998 to 2002, Dr. Fuehne performed similar work on automobile exhaust systems for ArvinMeritor Inc. in Colum- bus, Ind. In January of 2002, he accepted a position as an assistant professor of mechanical engineering technology for Purdue University at their satellite campus in Columbus, Ind. Since then, Dr. Fuehne has taught 15 different classes in the MET department and authored papers on real-world

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 1

Collection

2018 ASEE Annual Conference & Exposition

Authors

Chenyu Huang, Purdue University; Mary E. Johnson Ph.D., Purdue Polytechnic Institute; Thomas Eismin, Purdue University

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Texas at Arlington. After 5 years in aerospace manufacturing, Dr. Johnson joined the Automation & Robotics Research Institute in Fort Worth and was program manager for applied research programs. Fourteen years later, she was an Industrial Engineering assistant professor at Texas A&M - Commerce before joining the Aviation Technology department at Purdue University in West Lafayette, Indiana in 2007. She is a professor and is a Co-PI on the FAA Center of Excellence for general aviation research known as PEGASAS and leads engineering efforts in the Air Transport Institute for Environmental Sustainability. Her research interests are aviation sustainability, data driven process improvement, and engine

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 3

Collection

2018 ASEE Annual Conference & Exposition

Authors

Brian Kozak, Purdue Polytechnic Institute; Chenyu Huang, Purdue University

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #21116Laboratory Design to Enhance Understanding of Statics for Aeronautical En-gineering Technology StudentsDr. Brian Kozak, Purdue Polytechnic Institute Dr. Brian J. Kozak is a faculty member in the School of Aviation and Transportation Technology at Purdue University where he teaches in the Unmanned Aerial Systems and Aeronautical Engineering Technology majors. He also teaches at the graduate level. Dr. Kozak developed new courses on aeronautical statics, autonomous vehicle operations, and drone operations in outdoor flight environments. He is currently collaborating with industry partners to teach skills that

Conference Session

Experimentation and Laboratory-oriented Studies Division Technical Session 1

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Philip Jackson, University of Florida; Joshua Rudaitis, University of Florida

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

-quiz to create a baseline assessment of their understanding of fluid properties beforeundertaking the lab exercise, will complete guided instructions during the lab exercise, and willcomplete a post-quiz afterwards. Students will also complete a survey which will be used toassess their own interpretation of the exercises impact on their learning, interest, motivation, andretention.This data collection will be done over numerous semesters to create a large ensemble ofsamples to produce more statistically significant results.Conclusions and Future WorkLaboratory or hands-on experiences play a vital role in the education of engineers regardless ofhow much technology changes or advances and regardless of how education is delivered. Asmore high

Conference Session

Experimentation and Laboratory-Oriented Studies Division Technical Session 1

Collection

2019 ASEE Annual Conference & Exposition

Authors

David MacNair, Georgia Institute of Technology; David Edward Torello, Georgia Institute of Technology; Jeffrey A. Donnell, Georgia Institute of Technology

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #26956Designing a Laboratory Ecosystem Framework, and Scaffolding an Interac-tive Internal Combustion EngineDr. David MacNair, Georgia Institute of Technology Dr. MacNair serves as Director of Laboratory Development in the Woodruff School, and manages Junior and Senior level laboratories in Mechanical Engineering. He develops innovative laboratory experiences based on lessons-learned from the maker movement and real-world industrial challenges, and is building an ”ecosystem” of academic laboratory equipment and curriculum resources which allows universities to collaborate on the development and execution of

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 2

Collection

2018 ASEE Annual Conference & Exposition

Authors

Brian M. Wood, Keysight Technologies; Alexander O. Ganago, University of Michigan

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #22463Using Arduino in Engineering Education: Motivating Students to Grow froma Hobbyist to a ProfessionalMr. Brian M. Wood, Keysight Technologies Brian Wood has worked at all incarnations of Hewlett-Packard - HP, Agilent Technologies, and now Keysight Technologies - since 1973, with a few years off (2006-13) for ”retirement.” He’s been an R&D design engineer, production engineer, application engineer and is now in marketing, providing worldwide support for Keysight’s BenchVue instrument control software. In his spare time, he enjoys ham radio and electronic tinkering.Dr. Alexander O. Ganago, University of

Conference Session

Experimentation and Laboratory-Oriented Studies Division Technical Session 3

Collection

2019 ASEE Annual Conference & Exposition

Authors

Anas Chalah, Harvard University; Fawwaz Habbal, Harvard University; Michael Raspuzzi, Harvard University

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #26418How Research Informs Teaching and Learning Models: Case Studies in Build-ing Solar Cell and Bioengineering Technology in the Lab and ClassroomDr. Anas Chalah, Harvard University Dr. Anas Chalah Assistant Dean for Teaching and Learning Lecturer on Engineering Sciences Director of Lab Safety Program Harvard University John A. Paulson School of Engineering and Applied Science Pierce Hall G2A, 29 Oxford Street Cambridge, MA 02138 (617)-495-8991 achalah@seas.harvard.eduDr. Fawwaz Habbal, Harvard University Fawwaz Habbal has served as the Executive Dean for the Harvard School of Engineering and Applied Sciences

Conference Session

Remote Physical Laboratories: Experimentation and Laboratory-oriented Studies

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

John M. Sullivan Jr, Worcester Polytechnic Institute; Ahmet Can Sabuncu, Worcester Polytechnic Institute; Valerie B. Smedile Rifkin, Worcester Polytechnic Institute; Kimberly Lechasseur, Worcester Polytechnic Institute; Caitlin A. Keller, Worcester Polytechnic Institute

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Aerospace Engineering from Old Dominion University. Dr. Sabuncu’s professional interests spans from engineering education research, history of science and engineering, thermo-fluids engineering, and microfluidic technology. Dr. Sabuncu is eager to discover next gener- ation workforce skills and to educate next generation of engineers who will carry industry 4.0 forward considering the needs of the global world.Ms. Valerie B. Smedile Rifkin, Worcester Polytechnic Institute Valerie Smedile Rifkin is an Instructional Designer at Worcester Polytechnic Institute. She assists faculty with the design, development, and delivery of both online and face-to-face courses, with the goal of promoting a positive and engaging experience

Conference Session

Experimentation and Laboratory-oriented Studies Division Technical Session 2

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Brian D. Storey, Franklin W. Olin College of Engineering; Bradley A. Minch, Franklin W. Olin College of Engineering; Linda Vanasupa, Franklin W. Olin College of Engineering

Tagged Topics

Diversity

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #29397Work-in-Progress: A modular course on sensors, instrumentation andmeasurement: Supporting a diversity of learners’ agency of self-directionDr. Brian D. Storey, Franklin W. Olin College of Engineering Brian Storey is professor of mechanical engineering at Olin College.Dr. Bradley A Minch, Olin College of Engineering Bradley A. Minch received the B.S. degree with distinction in Electrical Engineering from Cornell Uni- versity in May 1991. In June 1997, he received the Ph.D. degree in Computation and Neural Systems from the California Institute of Technology (Caltech) where he worked under the supervision of

Conference Session

Experimentation and Laboratory-Oriented Studies Division Technical Session 4

Collection

2019 ASEE Annual Conference & Exposition

Authors

Dave Kim, Washington State University, Vancouver; Charles Riley P.E., Oregon Institute of Technology; Ken Lulay P.E., University of Portland

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

very active in pedagogical research and undergraduate research projects, and his research interests include manufacturing laboratory pedagogy and writing pedagogy.Dr. Charles Riley P.E., Oregon Institute of Technology Dr. Riley has been teaching mechanics concepts for over 10 years and has been honored with both the ASCE ExCEEd New Faculty Excellence in Civil Engineering Education Award (2012) and the Beer and Johnston Outstanding New Mechanics Educator Award (2013). While he teaches freshman to graduate- level courses across the civil engineering curriculum, his focus is on engineering mechanics. He has served in leadership positions in the ASEE Civil Engineering Division.Dr. Ken Lulay P.E., University of Portland

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 5

Collection

2018 ASEE Annual Conference & Exposition

Authors

Sulakshana Lal, Curtin University; Anthony Denis Lucey, Curtin University; Euan Lindsay, Charles Sturt University; David Franklin Treagust, Curtin University; Mauro Mocerino, Curtin University; John Matthew Long, Deakin University; Marjan G. Zadnik, Curtin University of Technology

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

. In 1995 he completed a PhD in physics at Monash University in Melbourne, Australia. Since then he has worked in the School of Engineering at Deakin University, where he teaches physics, materials, and electronics. His research interests include materials-analysis techniques, engineering education, and online learning. c American Society for Engineering Education, 2018 Paper ID #22272Prof. Marjan G. Zadnik, Curtin University of Technology c American Society for Engineering Education, 2018 The Effects of Remote Laboratory Implementation on First-year Engineering Students

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 3

Collection

2018 ASEE Annual Conference & Exposition

Authors

James R. McCusker Ph.D., Wentworth Institute of Technology; Mohammed A. Almaghrabi, Wentworth Institute of Technology; Bryon Kucharski, Wentworth Institute of Technology

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #23018Is a Virtual Reality-based Laboratory Experience a Viable Alternative to theReal Thing?James R. McCusker Ph.D., Wentworth Institute of Technology James R. McCusker is an Associate Professor at Wentworth Institute of Technology in the Department of Electrical Engineering. Since joining Wentworth in 2010, he has been heavily involved with an array of interdisciplinary design courses that range from introductory to capstone courses.Mr. Mohammed A. Almaghrabi, Wentworth Institute of Technology Mohammed A. Almaghrabi is a Trainee Engineer at ASM Process Automation, where he helps developing factory automation

Conference Session

Experimentation and Laboratory-Oriented Studies Division Technical Session 1

Collection

2019 ASEE Annual Conference & Exposition

Authors

Hadi Kazemiroodsari, Wentworth Institute of Technology; Phillip Curtsmith, Wentworth Institute of Technology; Nikolai Vaycheslav Gabardi; Anuja Kamat, Wentworth Institute of Technology; Kamren S. Donovan

Tagged Topics

Diversity

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #25963Design and Building of a Load Frame for Buckling TestProf. Hadi Kazemiroodsari, Wentworth Institute of Technology Hadi Kazemiroodsari is assistant professor at Wentworth Institute of Technology. He earned his PhD in Geotechnical engineering from Northeastern University. His area of expertise are Geotechnical engineer- ing and Earthquake engineering.Mr. Phillip Curtsmith, Wentworth Institute of TechnologyMr. Nikolai Vaycheslav GabardiDr. Anuja Kamat, Wentworth Institute of Technology Anuja Kamat is an Associate Professor in the Civil Engineering Department at Wentworth Institute of Technology, Boston. Prof

Conference Session

Experimentation and Laboratory-oriented Studies Division Technical Session 1

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Lijun Zhang, Beijing Institute of Technology; Dongxiao Wang, Beijing Institute of Technology ; Xiaofeng Tang, Ohio State University; Zhonglian Zhang, Beijing Institute of Technology; Hai Lin, Beijing Institute of Technology

Tagged Topics

Diversity

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #28854Redesigning an experimentation course with PBL pedagogy to supportaccreditation in ChinaDr. Lijun Zhang, Beijing Institute of Technology associate professor of teaching in the School of Optics and Photonics of Beijing Institute of Technology (BIT) in China. She received her Ph.D. in Optical Engineering from Beijing Institute of Technology. Her research interests situate in Engineering Education. Now she is working on a research about con- structing the practical curriculum system with the Outcome-Based Education (OBE) method to support the engineering education in BIT and the Engineering Education Program

Conference Session

Experimentation and Laboratory-Oriented Studies Division Technical Session 4

Collection

2019 ASEE Annual Conference & Exposition

Authors

Aldo A. Ferri, Georgia Institute of Technology; James I. Craig, Georgia Institute of Technology; Bonnie H. Ferri, Georgia Institute of Technology; Meltem Alemdar, Georgia Institute of Technology

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #26135Development of a Portable Experimental Platform to Demonstrate the Roleof Material and Cross-section in Beam BendingDr. Aldo A. Ferri, Georgia Institute of Technology Al Ferri received his BS degree in Mechanical Engineering from Lehigh University in 1981 and his PhD degree in Mechanical and Aerospace Engineering from Princeton University in 1985. Since 1985, he has been a faculty member in the School of Mechanical Engineering at Georgia Tech, where he now serves as Professor and Associate Chair for Undergraduate Studies. His research areas are in the fields of dynamics, controls, vibrations, and acoustics

Conference Session

Assessment in Laboratory and Project-based Courses: Experimentation and Laboratory-oriented Studies Division

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Lili Ma, New York City College of Technology; José M. Reyes Álamo, New York City College of Technology; Yu Wang, New York City College of Technology

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #32507Assessment of Creative Thinking in an Introductory Robotics Course UsingFinal ProjectDr. Lili Ma, New York City College of Technology Professor Lili Ma received her Ph.D. in Electrical Engineering from Utah State University focusing on autonomous ground vehicles. After that she did three-year post-doctoral training at Virginia Tech working with autonomous aerial vehicles. Prior to joining the Computer Engineering Technology (CET) depart- ment at City Tech in fall 2016, she taught at Wentworth Institute of Technology for many years. Profes- sor Ma’s research areas include autonomous mobile robots, vision-based

Conference Session

Assessment in Laboratory and Project-based Courses: Experimentation and Laboratory-oriented Studies Division

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Maria Javaid, Indiana State University

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

and voltage using digital multimeterat different parts of developed circuits.This course is required for Electronics Engineering Technology, Automation and ControlEngineering Technology, Computer Engineering Technology, and Information Technologyprograms. Students from some other majors of College of Technology also take this course.The results presented in this paper are from the class of Fall 2019. So, the class was not impactedby the coronavirus pandemic. The class had total 23 students. Students were informed from thebeginning that all course examinations will include individual laboratory examination.Evaluation of Individual Laboratory ExperimentsLaboratory experiments are performed by groups of two students. Students are given

Conference Session

Adaptation of Laboratory-based Courses During a Pandemic: Experimentation and Laboratory-oriented Studies Division

Collection

2021 ASEE Virtual Annual Conference Content Access

Authors

Maria Javaid, Indiana State University; Edie L. Wittenmyer, Indiana State University; Oscar Henriquez, Indiana State University; Larry D. Pritchett, Indiana State University

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

and for the past ten years I have served as faculty member in the Electronics & Computer Engineering Technology de- partment, Computer of Technology at Indiana State University. Currently, pursuing a PhD in Curriculum and Instruction, College of Education.Oscar Henriquez, Indiana State UniversityMr. Larry D. Pritchett, Indiana State University Instructor at Indiana State University, with former teaching experience at Lycoming College and Penn State University. Industry experience as I.T. Manager at Keystone Veneers, and Project Manager/Prototype Developer at Rose-Hulman Ventures and Structural Fibers Inc. Interests include software development and software engineering, networkng and security, and I.T

Conference Session

Experimentation and Laboratory-Oriented Studies Division Technical Session 5

Collection

2019 ASEE Annual Conference & Exposition

Authors

Michael Golub, Indiana University Purdue University Indianapolis; Jing Zhang, Indiana University Purdue University, Indianapolis

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

properties, with highest ultimatestrength and fracture toughness. With the measured properties, the 3D printed samples are aviable solution for engineering students to learn mechanical properties of materials. The impactsof using 3D printed specimens on the engineering curriculum for mechanical engineers are alsodiscussed.IntroductionFused deposition modeling (FDM) is an additive manufacturing technology commonly used formodeling, prototyping, and production applications. It is one of the techniques used for 3Dprinting. FDM works on an “additive” principle by laying down material in layers; a plasticfilament is unwound from a coil and supplies material to produce a part. Three-D printers thatrun on FDM Technology build parts layer-by-layer from the

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 5

Collection

2018 ASEE Annual Conference & Exposition

Authors

Kimia Moozeh, University of Toronto ; Nadine Ibrahim, University of Toronto; Rahim Rezaie, University of Toronto; Yacob Astatke, Morgan State University; Murray R. Metcalfe, University of Toronto; Greg Evans, University of Toronto

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

sustainable urbanization with ecological economics to address climate change in cities, and strives to find ways to re-imagine and redefine engineering of the future.Dr. Rahim Rezaie, University of Toronto Dr. Rahim Rezaie is a Senior Advisor and Program Coordinator at the University of Toronto’s Faculty of Engineering, where he is engaged in teaching, grant writing and coordinating research projects. He has conducted post-doctoral fellowships at the Rotman School of Management and the Munk School of Global Affairs, and completed a Post Graduate Research Fellowship at the Asia Pacific Foundation of Canada. Dr. Rezaie’s expertise and research interest is in global health, with a focus on health technology innovation. He

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 2

Collection

2018 ASEE Annual Conference & Exposition

Authors

Nebojsa I. Jaksic, Colorado State University, Pueblo; Bahaa I. Kazem Ansaf, Colorado State University, Pueblo

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

design process and are addressed in many engineering texts [9,10] and in engineering education literature [11-13].3D printing is a form of AM whereby objects are created by adding material as opposed tosubtractive manufacturing processes like machining whereby the objects are created by removingmaterial. 3D printers were used in some engineering programs to create physical objects [14-19].Originally, these 3D-printed objects were fairly costly because they were printed using expensive3D printers with expensive materials. However, recently, a number of fundamental 3D printingpatents expired and opened this technology to the rest of the world. New companies startedproducing inexpensive FFF 3D printers thus enabling their expansive use in

Conference Session

Experimentation and Laboratory-Oriented Studies Division Technical Session 6

Collection

2019 ASEE Annual Conference & Exposition

Authors

Gavin Garrett Tipker, Indiana University Purdue University, Indianapolis; Michael Golub, Indiana University Purdue University, Indianapolis; Tejesh Charles Dube, Indiana University Purdue University, Indianapolis; Jing Zhang, Indiana University Purdue University, Indianapolis

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

and modeling (http://www.engr.iupui.edu/˜jz29/) c American Society for Engineering Education, 2019 Integration of 3D printed Drone Project in General Engineering CurriculumAbstractWe recently developed a new project-based 3D printing module in general engineeringcurriculum. Specifically, students are required to make a drone using 3D printed components.The revised engineering course with the new module has received extensive interests andpositive feedback from students. They learned how to apply the fundamentals, applications, andimplications of 3D printing or additive manufacturing (AM) in a real-world project.1. Introduction With technology getting better every year, it is imperative that students

Conference Session

Experimentation and Laboratory-oriented Studies Division Technical Session 2

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Cyrus Habibi P.E., University of Wisconsin, Platteville; Darius Fieschko, University of Wisconsin, Platteville

Tagged Divisions

Aerospace, Experimentation and Laboratory-Oriented Studies

processes such asManufacturing Production Lines, Chemical & Petrochemical, Energy & Utilities, Pulp & Paper,Oil & Gas, Water and Wastewater Treatment, Pharmaceutical, Food, Tobacco, & Beverage,Automotive, and more [1].The PLC market has shown consistent growth over the last 50 years, and growth is going tocontinue with an expected compound annual growth rate of 3.7% between the forecast period of2019 to 2024 [2]. In fact, automated PLC systems are projected to reduce average machinedowntime from 20% to almost 4% [3].PLC programming is a part of engineering technology programs at many universities, and arecommonly taught by experienced industry people or implemented as a module in industrialcontrol [4], fluid power [5

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 3

Collection

2018 ASEE Annual Conference & Exposition

Authors

David F. Radcliffe, Swinburne University of Technology; Mary K. Pilotte, Purdue University, West Lafayette

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #21967Field Investigations: An Overlooked Form of Laboratory ExperienceProf. David F. Radcliffe, Swinburne University of Technology Dr. Radcliffe’s research focuses on the nature of engineering; engineering habits of mind, how engineering knowledge is created and shared and how it is learned especially outside the classroom. Over the past 30 years, he has conducted field research on the practice of engineering design, new product development and innovation in variety of industries, in large and small firms with an emphasis on design thinking, most recently in relation to sustainability. He also studies

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 1

Collection

2018 ASEE Annual Conference & Exposition

Authors

Gene L. Harding, Purdue Polytechnic Institute; Megan Prygoski, Purdue University, West Lafayette; James Burns, Purdue Polytechnic Institute; Brian Jeffrey Carmichael, Security Automation Systems; Matthew S. Engstrom, Purdue University

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #21403A Portable Engine Dynamometer Test Cell for Studying Spark-ignition En-gine Performance and Mechanical-Electrical-Thermodynamic Energy Con-versionProf. Gene L. Harding, Purdue Polytechnic Institute GENE L. HARDING is an associate professor of Electrical and Computer Engineering Technology at Purdue University, where he has taught since 2003. He has three years of industrial experience with Agilent Technologies, 28 years of combined active and reserve service in the United States Air Force, holds an MSEE from Rose-Hulman Institute of Technology, and is a licensed professional engineer.Dr. Megan Prygoski, Purdue

Conference Session

Experimentation and Laboratory-oriented Studies Division Technical Session 3

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Hitesh D. Vora, Oklahoma State University; Brad Rowland, Oklahoma State University; Joe Conner, Oklahoma State University; Brian K. Norton P.E., Oklahoma State University; Qinang Hu, Oklahoma State University; Toni Ivey, Oklahoma State University

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Paper ID #31427Oklahoma State University’s ENDEAVOR: Transformation of Undergradu-ateEngineering Education through the Experience-based learning.Dr. Hitesh D. Vora, Oklahoma State University Dr. Hitesh D. Vora is an Assistant Professor in Mechanical Engineering Technology. He received his Ph.D. and Masters’ from the University of North Texas in Materials Science & Engineering (in 2013) and Mechanical Engineering Technology (in 2008), respectively. Dr. Vora is a Director of the Industrial Assessment Center (IAC) at Oklahoma State University, which is funded by the US Department of Energy (DOE) for the year 2016-2021

Conference Session

Experimentation and Laboratory-Oriented Studies Division Technical Session 6

Collection

2019 ASEE Annual Conference & Exposition

Authors

Haryana Yosef Thomas, Calvin College; Charles E. Holwerda, Calvin College; Jeremy VanAntwerp, Calvin College

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

Technology, vol. 8, pp. 456-465, 2000.[15] M. L. Derouiche, S. Bouallègue, J. Haggège and G. Sandou, "Rapid Model Predictive Control prototyping with LabVIEW/CDSim and CompactRIO target," in 2016 4th International Conference on Control Engineering Information Technology (CEIT), 2016.[16] P. S. Suryawanshi, S. P. Jadhav, M. D. Patil and M. M. Sarode, "LabVIEW based MPC for level control of a laboratory setup," in 2015 International Conference on Communication, Information Computing Technology (ICCICT), 2015.[17] K. R. Muske, "Experience with model predictive control in the undergraduate laboratory," Computer Applications in Engineering Education, vol. 13, pp. 40-47, 2005.[18] B. W. Bequette, "A laptop-based studio course for

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 4

Collection

2018 ASEE Annual Conference & Exposition

Authors

Daisuke Aoyagi, California State University, Chico

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

research interests are in the areas of engineering education, mechatronics, robotics, assistive technology, and rehabilitation engineering. c American Society for Engineering Education, 2018 No-cost Implementation of Electronic Lab Notebooks in an Intro Engineering Design CourseAbstractIn our “Introduction to Engineering Design” course, we had traditionally used paper-based LabNotebooks (LN). In a three-ring binder, students would keep records of their work, includingprintout of spreadsheets, controller programs, etc. However, many students expressed reluctanceto this routine, part of the reason being the cost and inconvenience of printing. They regardedthe LN and, by association

Conference Session

Experimentation and Laboratory-oriented Studies Division Technical Session 3

Collection

2020 ASEE Virtual Annual Conference Content Access

Authors

Eleanor Byrnes, Harvey Mudd College; Yaqub Alam Mahsud, Harvey Mudd College; Spencer Rosen, Harvey Mudd College; Matthew Spencer, Harvey Mudd College

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

into the pedagogy of laboratory design.1 IntroductionEngineering is a discipline that requires interaction with the physical world, so it is of littlesurprise that there is broad consensus among engineering educators that laboratory classes are animportant part of engineering curriculums ​[1]​. However, the Accreditation Board forEngineering and Technology (ABET) doesn’t specify how many laboratory classes should be inan engineering program, instead offering the guideline that laboratory experiences should be“appropriate to the program” ​[2]​. Literature is also quiet on the question of “how manyengineering laboratory classes does an undergraduate engineer take?”This study tried to answer that question by performing a systematic review of

Conference Session

Division for Experimentation & Lab-oriented Studies Technical Session 3

Collection

2018 ASEE Annual Conference & Exposition

Authors

Rika Wright Carlsen, Robert Morris University; Shamika Zyhier, Robert Morris University; Arif Sirinterlikci, Robert Morris University

Tagged Divisions

Experimentation and Laboratory-Oriented Studies

the course instruction for the first time in the Spring of 2017.Project ConceptualizationThe vein finder device project was established through a collaborative effort between our nursingand biomedical engineering programs. Vein finder devices use near-infrared (NIR) light toilluminate veins, which may not be visible to the naked eye11-14. These devices serve as aninvaluable tool to locate a suitable vein for peripheral intravenous catheter (PIVC) insertion,which can be challenging in some patients due to age, skin color, obesity, or existing medicalconditions15. Near-infrared vein finding technology can be especially valuable to nursingstudents who are learning how to select appropriate veins for IV insertion and are expected toperform PIVC