Conference Session

Multidisciplinary Outreach and Early Transdisciplinary Courses

Collection

2016 ASEE Annual Conference & Exposition

Authors

Liping Liu, Lawrence Technological University; Mansoor Nasir, Lawrence Technological University; Yawen Li, Lawrence Technological University; Selin Arslan, Lawrence Technological University; Changgong Zhou, Lawrence Technological University; Hsiao-Ping H. Moore, Lawrenece Technological University

Tagged Topics

Diversity

Tagged Divisions

Multidisciplinary Engineering

the summer camp.Nanotechnology Summer CampThe nanotechnology summer camp was initiated in Summer 2014 and was offered again inSummer 2015. The camp is weeklong (Monday through Friday 9AM-4PM) and is open byapplication to high school juniors and seniors. The students have the option to be residential ornon-residential. Enrollment data showed that 5 out of the 16 participants are from out of state(31%). The goals of the camp are: (1) to stimulate the students’ interest in the area ofnanotechnology, (2) to educate students (and parents) about the opportunities for industrial andresearch careers in this field, and (3) to attract students to the minor in nanotechnology whichwas recently launched at Lawrence Tech. During the five days of the summer

Conference Session

Viewpoints, Perspectives, and Creativity in Civil Engineering Education

Collection

2016 ASEE Annual Conference & Exposition

Authors

Abbie B Liel P.E., University of Colorado - Boulder; Timothy J Clarkin, University of Colorado - Boulder

Tagged Topics

Diversity

Tagged Divisions

Civil Engineering

to the real world and their future engineering careers. Afterbrainstorming a number of ideas, the faculty instructor approached the local Habitat forHumanity (HfH) affiliate and asked them if they would be willing to collaborate. This choicemade sense because HfH is active in the local community, and they are seeking to deepenpartnerships with the university and university students. At the time, the local HfH affiliate wasfocusing their efforts on rebuilding homes in a nearby community that had experienceddevastating floods two years before. They invited the students to work on one of their projectswhich involved reconstruction of a home that had been completely destroyed, pictured in Figure1. In addition, the local HfH communications and

Conference Session

Institutional Capacity and Supportive Structures in Engineering Education

Collection

2016 ASEE Annual Conference & Exposition

Authors

Yvette E. Pearson P.E., University of Texas, Arlington; Karen E. Crosby, Southern University Baton Rouge; Edgar R. Blevins, Southern University and A&M College; Beth R Isbell, University of Texas, Arlington; Andrew P. Kruzic, University of Texas, Arlington; Stephen P. Mattingly, University of Texas, Arlington; Lynn L. Peterson, University of Texas, Arlington; J. Carter Tiernan, University of Texas, Arlington

Tagged Topics

Diversity

Tagged Divisions

Minorities in Engineering

with demonstrated financial need who are pursuing associate, baccalaureate, [or] graduate degrees in STEM and enter the STEM workforce or graduate study; ● implement and study models, effective practices, and/or strategies that contribute to understanding of factors of supportive curricular and co- curricular activities that affect recruitment, retention, student success, academic/career pathways, and/or degree attainment (including student transfer) in STEM of low-income academically talented students with demonstrated financial need; and ● contribute to the implementation and sustainability of effective curricular and co

Conference Session

Student Teams, Groups, and Collaborations

Collection

2016 ASEE Annual Conference & Exposition

Authors

Lori C. Bland, George Mason University; Stephanie Marie Kusano, University of Michigan; Aditya Johri, George Mason University

Tagged Divisions

Educational Research and Methods

in the Information Sciences and Technology Department. Dr. Johri studies the use of information and communication technologies (ICT) for learning and knowledge shar- ing, with a focus on cognition in informal environments. He also examine the role of ICT in supporting distributed work among globally dispersed workers and in furthering social development in emerging economies. He received the U.S. National Science Foundation’s Early Career Award in 2009. He is co-editor of the Cambridge Handbook of Engineering Education Research (CHEER) published by Cam- bridge University Press, New York, NY. Dr. Johri earned his Ph.D. in Learning Sciences and Technology Design at Stanford University and a B.Eng. in Mechanical

Conference Session

International Division Technical Session 8

Collection

2016 ASEE Annual Conference & Exposition

Authors

Alan R. Parkinson, Brigham Young University; Spencer P. Magleby, Brigham Young University; Gregg Morris Warnick, Brigham Young University

Tagged Topics

Diversity

Tagged Divisions

International

directors, who then alternate years. • We have been pleased we have been able to provide some financial assistance for students, since these programs are expensive. We have found that donors like to support these programs. Many of them have “lived this experience” in their professional careers and are anxious to provide support for what they feel is “the real world.” • We have also faced some challenges. One challenge was unexpected and more physical in nature—three faculty developed blood clots (two while abroad) directly related, we think, to sitting down for long periods of time while flying. One faculty member suffered a heart attack while in China. Fortunately we had two faculty directors on

Conference Session

K-12 & Pre-College Engineering Division: Evaluation: Impact of Curriculum for PreK-12 Engineering Education

Collection

2016 ASEE Annual Conference & Exposition

Authors

Lana Plumanns M.Sc., RWTH Aachen University; Sebastian Reuter P.E., RWTH Aachen University; Kristina Lena Lahl, RWTH Aachen University; Rene Vossen, RWTH Aachen University; Sabina Jeschke, RWTH Aachen University

Tagged Topics

Diversity

Tagged Divisions

Pre-College Engineering Education Division

affiliated with science, technology, engineering and mathematics.This attraction was also pronounced in the female sample. Over 79 percent of the participantsintended on starting their future career in this sector as a result of the rewarding experiencesthey had had in the Lab. 6. DiscussionThe main aim of the study was to evaluate the status of the courses offered to students usingexperiments. Our results clearly indicate the positive effects that the various experiments hadon participants during their visit, which in turn is seen to affect the participants’ desire tostudy STEM fields in the future. The visits have had positive impacts on students and haveaffected their future career plans.Over the past couple of years, a great deal of effort has

Conference Session

Measuring Learning in Statics & Dynamics

Collection

2016 ASEE Annual Conference & Exposition

Authors

Nick Stites, Purdue University, West Lafayette; David A Evenhouse, Purdue University; Mariana Tafur-Arciniegas P.E., Purdue University, West Lafayette; Charles Morton Krousgrill, Purdue University, West Lafayette; Craig Zywicki, Purdue University; Angelika N Zissimopoulos, University of Chicago; David B Nelson, Purdue University, West Lafayette; Jennifer Deboer, Purdue University, West Lafayette; Jeffrey F Rhoads, Purdue University, West Lafayette; Edward J. Berger, Purdue University, West Lafayette

Tagged Divisions

Mechanics

, Materials and Manufacturing Segment Leadership Team and the Design Engineer- ing Division’s Technical Committees on Micro/Nanosystems and Vibration and Sound. Dr. Rhoads is a recipient of the National Science Foundation’s Faculty Early Career Development (CAREER) Award, the Purdue University School of Mechanical Engineering’s Harry L. Solberg Best Teacher Award (twice), and the ASEE Mechanics Division’s Ferdinand P. Beer and E. Russell Johnston, Jr. Outstanding New Mechanics Educator Award. In 2014, Dr. Rhoads was selected as the inaugural recipient of the ASME C. D. Mote Jr., Early Career Award and was featured in ASEE Prism Magazine’s 20 Under 40.Dr. Edward J. Berger, Purdue University, West Lafayette Edward Berger is

Conference Session

Innovative Approaches to Ethics Instruction

Collection

2016 ASEE Annual Conference & Exposition

Authors

Shawn Bowers, Gonzaga University; Ellen M. Maccarone, Gonzaga University; George D. Ricco, Gonzaga University

Tagged Divisions

Engineering Ethics

 have developed a set of modules covering ethical, legal, and societal issues in computer science that we have integrated into our year­long  1​senior capstone program. According to other studies​ , a lack of technical knowledge and sophistication are often seen as barriers to student engagement in ethics courses taught in lower­level courses. Thus, one of our reasons for covering ethical considerations at the senior level is to help make ethics more concrete and tangible for students by leveraging their experience and maturity in software development (gained through coursework, internships, and in thinking about their own careers). Further, the approach of integrating ethics modules into

Conference Session

Dissecting the Nuances that Hinder Broad Participation in Engineering

Collection

2016 ASEE Annual Conference & Exposition

Authors

Brian A. Burt, Iowa State University; Alade S McKen, Iowa State University; Jordan Anthony Burkhart, Iowa State University; Jennifer Hormell, Iowa State University; Alec James Knight, Iowa State University

Tagged Topics

Diversity

Tagged Divisions

Minorities in Engineering

navigate anxiety and culture shock that mayaccompany undertaking a new endeavor in an unfamiliar place. Additionally, the advisor canhelp students network by making new contacts and gaining exposure to other faculty, advancedstudents, and members of their broader professional community.6,7 The advisor-advisee relationship is complex and life-changing; one’s advisor can help togenerate ideas about and support for postgraduate career choices, and help influence students’professional identity.8 In fields like engineering, where the academic advisor may also serve as astudent’s research supervisor,8 the advisor-advisee relationship includes myriad power dynamics.As a result, the advising relationship could have positive and/or negative effects

Conference Session

But I'm a Loner! Expanding capability and creativity by examining effective alliances

Collection

2016 ASEE Annual Conference & Exposition

Authors

Shannon Ciston, University of California, Berkeley; Colin Cerretani, University of California, Berkeley; Marjorie S Went, UC Berkeley

Tagged Divisions

New Engineering Educators

programs are growing.Brent and Felder’s 2008 ASEE paper on a professional development program for graduatestudents at their university described a program to help graduate students develop skills ineffective teaching, and a workshop to help prospective faculty find the right academic job andlaunch their careers. Their pedagogy component includes material on teaching assistant roles andresponsibilities, responding to crises, and handling cheating, as well as elective material specificto each teaching assistant’s needs, including grading, using technology, facilitating laboratories,and working with diverse teaching and learning styles.10Several universities offer optional teaching certification programs for teaching assistants whowish to delve

Conference Session

Multidisciplinary Capstone Courses

Collection

2016 ASEE Annual Conference & Exposition

Authors

Marissa H. Forbes, University of Colorado Boulder; Jacquelyn F. Sullivan, University of Colorado, Boulder; Beth A Myers, University of Colorado Boulder; Derek T Reamon Ph.D., University of Colorado, Boulder

Tagged Topics

Diversity

Tagged Divisions

Multidisciplinary Engineering

Engineering and Applied Science at the University of Colorado Boulderinaugurated a flexible, customizable and design-focused multidisciplinary undergraduateengineering degree program, built on a common engineering core, with a hands-on engineeringdesign focus throughout all four years. Predicated upon the belief that students know what is bestto meet their own career and personal interest needs, the curriculum branches out so studentschoose many courses to pursue their individual passions. Different than the traditional restrictiveengineering curricular models that act as barriers to student migration into engineering programs,the curricular flexibility and choice in the Engineering Plus (e+) program makes transferring intothe program more navigable

Conference Session

Assessment, Course, and Curricular Development

Collection

2016 ASEE Annual Conference & Exposition

Authors

Robert W. Fletcher, Lawrence Technological University; Louise Marianne de Matos Brasil, Universidade Estadual do Rio Grande do Sul

Tagged Divisions

Energy Conversion and Conservation

exposure to the nature of future career opportunities.(5) Recent studies haveshown the relationships of internships, as well as other employment opportunities, to the hoursworked by a student and their impact on grade point average (GPA) compared to studentretention.(6) The use of required professional internships for graduation from engineeringprograms have also been carefully assessed.(7) The specific outcomes with compelling data werealso recently presented showing how internships have improved student’s personal attitudestowards their future prospects in an engineering career, and have documented the positivefinancial benefits to an organization.(8) Others have established multi-institutional internshipprograms for several engineering

Conference Session

International Division Technical Session 4

Collection

2016 ASEE Annual Conference & Exposition

Authors

Tony Lee Kerzmann, Robert Morris University; Casey James McAndrew; Kendra Slis; Maria Elisabeth French; Katelyn Maione P.E., Robert Morris University

Tagged Divisions

International

providing better career opportunities.There is also a connection between study abroad programs and increased soft skills in students.Soft skills are moving higher and higher on the list of things employers are looking for in anengineer. CENews published the results of a survey they conducted that supported this claimsaying that “[W]e’ve talked about [what] we need to incorporate perhaps more in the education,so that students [who graduate are] more prepared for a job, and that includes management skills,written skills, oral communication skills, ethics, technical skills, more broad-based knowledge,more emphasis on humanities.” There is evidence that study abroad experiences, particularlysemester long programs, improve soft skills such as writing

Conference Session

Works in Progress: Faculty Perspectives and Training

Collection

2016 ASEE Annual Conference & Exposition

Authors

Eugene Judson, Arizona State University; Lydia Ross, Arizona State University; James A. Middleton, Arizona State University; Stephen J. Krause, Arizona State University; Casey Jane Ankeny, Arizona State University; Ying-Chih Chen, Arizona State University; Robert J. Culbertson, Arizona State University; Keith D. Hjelmstad, Arizona State University; Yong Seok Park, Arizona State University

Tagged Topics

Diversity

Tagged Divisions

Educational Research and Methods

only five cost items and these were consideredcohesive, no cost subcategories were isolated.Table 3. Subcategories of Value and Expectancy Items Construct Sub-category n Example item Using this strategy/tool fosters positive value for students 8 Value student attitudes towards learning. value for self 3 Using this strategy/tool aids my career. My students lack the skills necessary to based on students 5

Conference Session

Engineering Physics & Physics Division Poster Session

Collection

2016 ASEE Annual Conference & Exposition

Authors

Scott Kirkpatrick, Rose-Hulman Institute of Technology; Richard W. Liptak, Rose-Hulman Institute of Technology; Renat Letfullin, Rose-Hulman Institute of Technology

Tagged Divisions

Engineering Physics & Physics

plays in the semiconductor fabrication processin EP410 and EP411. Photolithography equipment such as projection and contact aligners andsteppers are discussed in detail. The students are exposed to the concepts of a photomask – whatit is and how you fabricate it and why you use it in the fabrication process. Figures of merit suchas numerical aperture, minimum feature size and resolution are discussed as well. Advancedconcepts are introduced in EP411.DesignRequired Courses: EM103 or ECE160, EP415-417, EP407, EP411The EP students are exposed to the concept of design throughout their career at RHIT. Thisbegins during their freshman year when they take an introductory design course (either EM103or ECE160). The introductory design course Introduces

Conference Session

INDUSTRY DAY: Industry-Focused Collaboration Techniques

Collection

2016 ASEE Annual Conference & Exposition

Authors

Victor Taratukhin, Stanford University; Yury V. Kupriyanov, National Research University Higher School of Economics; Jörg Becker

Tagged Topics

Corporate Member Council

Tagged Divisions

College Industry Partnerships

facilitate the problem solution.According to its focus, educational collaboration can be classified in three groups (Thune2011):  development of new educational programs,  industry invocation in teaching and learning process by thesis supervision, lecturing or conducting research projects,  transfer between studies and work life (internships, career fairs, trainee or other recruitment programs).While the last group of activities is relatively easy to realize in short-term, the first two typesof cooperation might cause certain difficulties. The problems mostly occur because of thedifferences in nature and culture of the academia and industry worlds (Bruneel et al. 2010;Cerych and Frost-Smith 1985

Conference Session

International Division Technical Session 6

Collection

2016 ASEE Annual Conference & Exposition

Authors

Sahithya Reddivari, University of Michigan; Elizabeth Frances Cloos Dreyer, University of Michigan; Sara P Rimer, University of Michigan; Aline Cotel, University of Michigan

Tagged Topics

Diversity

Tagged Divisions

International

 students from the U.S. participated in a two­week residential engineering leadership camp, entitled Setting Up Collegiates for Careers in Engineering through Social Support (SUCCESS) alongside 30 Liberian undergraduate female engineering students from three Liberian universities (Stella Maris Polytechnic, University of Liberia, St. Clements University College). The camp was held in Kakata, Liberia, West Africa and carried out by 5 U.S. graduate students.  The camp was structured in a workshop format with an average of three workshops a day. The workshops included academic and professional skills sessions covering topics related to graduate school application process, personal statement writing, leadership development, cross­cultural communication

Conference Session

Innovative Teaching

Collection

2016 ASEE Annual Conference & Exposition

Authors

Oscar Antonio Perez, University of Texas - El Paso; Pedro Arturo Espinoza, University of Texas - El Paso; Hugo Gomez, University of Texas - El Paso; Mike Thomas Pitcher, University of Texas - El Paso; Randy Hazael Anaya, University of Texas - El Paso; Herminia Hemmitt, University of Texas - El Paso; Hector Erick Lugo Nevarez, University of Texas - El Paso

Tagged Topics

Diversity

Tagged Divisions

Computers in Education

’ perception of how much they learneddramatically shifted towards the above average and well above average categories after theimplementation of the 3D technology project. Another set of questions in which the majority of the students agree on their perceivedlearning is shown in Figure 6 for the first year and Figure 8 for year two. In this set of questions theagreement of the students was higher than 60% and lower than 70% for year one and between 80%and 82.6% for year two. Here we can see that the 3D technology project had a high impact in theareas of time management, engineering career awareness and planning, research methods andtechniques, critical thinking concepts, and unit systems and conversions. From previous research wehave confirmed

Conference Session

K-12 & Pre-College Engineering Division: Evaluation: Impact of Curriculum for PreK-12 Engineering Education

Collection

2016 ASEE Annual Conference & Exposition

Authors

Marilyn Barger, Florida Advanced Technological Education Center of Excellence; Richard Gilbert, University of South Florida

Tagged Topics

Diversity

Tagged Divisions

Pre-College Engineering Education Division

Paper ID #14607Twelve Years of Growth and Success at Douglas L. Jamerson ElementarySchool Center for Mathematics and EngineeringDr. Marilyn Barger, Florida Advanced Technological Education Center of Excellence Dr. Marilyn Barger is the Principal Investigator and Executive Director of FLATE, the Florida Regional Center of Excellence for Advanced Technological Education, funded by the National Science Founda- tion and housed at Hillsborough Community College in Tampa, Florida since 2004. FLATE serves the state of Florida as its region and is involved in outreach and recruitment of students into technical career pathways

Conference Session

Software Applications in ET Programs

Collection

2016 ASEE Annual Conference & Exposition

Authors

Maddumage Karunaratne, University of Pittsburgh, Johnstown

Tagged Divisions

Engineering Technology

consumer those devicesoffer customization to a level that was never seen before. However, such customizations requiredevelopment of computer programs to control the devices and data streams. When electrical andcomputer engineers are trained, it is becoming more imperative that nearly all acquire some level ofcomputer programming skills to effectively function as engineers in their careers. The nature of workperformed in industry changes as they progress in careers. Lack of programming ability andexperience may challenge their opportunities for technical and even managerial advancements. Forexample, a senior engineer without programming experience would not become a project manager ifthat project requires a significant amount of software to be

Conference Session

Construction Session 4: Outside of the Construction Curriculum

Collection

2016 ASEE Annual Conference & Exposition

Authors

Joseph A Raiola III, Central Connecticut State University

Tagged Topics

Diversity

Tagged Divisions

Construction

visualize, but the technical aspects of learning thesoftware were difficult at first. Students also noted the high level of construction knowledgerequired for this course. The study pointed out that students were very motivated to learn thissoftware and concluded that “properly structured BIM courses would provide industry-requiredknowledge to prepare student to successful careers in the AEC industries” 33.Members of the Associated Schools of Construction Education (ACCE) have been working onimplementing BIM into their curriculum 30. The have recommended that educators should beinvestigating how this powerful tool can enhance their curriculum. Building InformationModeling can better integrate a construction curriculum 2. During a class

Collection

2016 ERC

Authors

Robert Morse

about graduate engineering education and engineering education at other degree levels.• This choice has very important job and career implications.• This choice is heavily influenced by the ever rising bill for tuition and room & board, travel, clothes, entertainment and other expenses. LIFE’S DECISIONS MADE HERE.Implications of the U.S. News Engineering Rankings • U.S. News has been publishing academic rankings for over 30 + years. • U.S. News has become a trusted, respected and unbiased source of engineering rankings and assessments that prospective engineering school students in the U.S. and worldwide turn to for reliable advice, comparisons between schools and

Conference Session

Supply Chain and Logistics in Manufacturing Education

Collection

2016 ASEE Annual Conference & Exposition

Authors

Vani Gaddam, Tennessee Technological University; Ismail Fidan, Tennessee Technological University; Bonita Barger, Tennessee Technological University

Tagged Topics

Diversity

Tagged Divisions

Manufacturing

Society for Engineering Education, 2016 Hands-on Entrepreneurial Engineering Management Course and Its Experiential LearningAbstractEntrepreneurial Engineers are educated for the forthcoming economy and market, whereentrepreneurs with technical skills have tremendous opportunities and career options. This newcourse was developed in Spring 2015 and offered in Summer 2015, delivering skills sets inengineering, marketing management, economics and globalization for the 21 century’s state-of-the art Renaissance Engineers and Managers as a faculty-led program in Turkey.The authors strongly believe in experiential learning. Traveling, experiencing, and exploringother cultures helps students grow personally and professionally

Conference Session

K-12 & Pre-College Engineering Division: Fundamental & Research-to-Practice: K-12 Engineering Resources: Best Practices in Curriculum Design (Part 2)

Collection

2016 ASEE Annual Conference & Exposition

Authors

Mary Ann Jacobs, Manhattan College; Kathleen Christal Mancuso, Manhattan College ; Zahra Shahbazi, Manhattan College; Alexandra Emma Lehnes, Manhattan College; Anthony Scotti, Manhattan College

Tagged Divisions

Pre-College Engineering Education Division

engineering faculty to form a partnership to createdynamic lesson plans that promote inquiry in the classroom. The stigma very often placed on themath and science classroom is that the content is difficult and uninteresting. By providingmultiple professional development sessions, constant communication with the engineeringprofessors, and peer review with other teachers within the program, teachers developed lessonplans that helped not just one, but all teachers interested in bringing engineering to life in theirclassrooms. When presenting math or science content at the middle and high school level, these initialexperiences could potentially be the catalyst to drive students toward a career in these essentialfields. The goal of persuading

Conference Session

Engineering Physics Technical Session 1

Collection

2016 ASEE Annual Conference & Exposition

Authors

Yumin Zhang, Southeast Missouri State University; David K. Probst P.E., Southeast Missouri State University

Tagged Divisions

Engineering Physics & Physics

Paper ID #14669Introducing Physics Concepts with Illustrative StoriesProf. Yumin Zhang, Southeast Missouri State University Yumin Zhang is an associate professor in the Department of Physics and Engineering Physics, Southeast Missouri State University. His academic career started in China; in 1989 he obtained master’s degree on Physics from Zhejiang University and then was employed as technical staff in the Institute of Semi- conductors, Chinese Academy of Sciences. After receiving PhD degree on Electrical Engineering from University of Minnesota in 2000, he started to work as a faculty member in University of Wisconsin

Conference Session

Works in Progress: Faculty Perspectives and Training

Collection

2016 ASEE Annual Conference & Exposition

Authors

Edward J. Berger, Purdue University, West Lafayette; Ryan R. Senkpeil, Purdue Engineering Education; Elizabeth K. Briody Ph.D., Cultural Keys LLC; Edward F. Morrison, Purdue University, West Lafayette

Tagged Divisions

Educational Research and Methods

conducted manufacturing cost studies in the U.S., Japan, Mexico, Canada, Italy, Sweden, and France. Ed started his professional career in Washington, D.C., where he has served as a legislative assistant to an Ohio Congressman, staff attorney in the Federal Trade Commission, and staff counsel in the US Senate. He holds a BA degree cum laude with honors from Yale University and MBA and JD degrees from the University of Virginia. c American Society for Engineering Education, 2016WIP: A Pedagogical Borderland? Comparing Student and Faculty Attitudes and Actions About Teaching and LearningIntroductionThis Work in Progress (WIP) paper describes early results from a new research study

Conference Session

Interactive Session - Community Engagement Implementation for K-12 Settings

Collection

2016 ASEE Annual Conference & Exposition

Authors

Molly Y Mollica, The Ohio State University; Rachel Louis Kajfez, The Ohio State University; Elizabeth Riter, The Ohio State University; Meg West, The Ohio State University; Peter Vuyk, The Ohio State University

Tagged Topics

Diversity

Tagged Divisions

Community Engagement Division

Scholars Program at The Ohio State University. She graduated with her B.S. in Civil Engineering from Ohio State in 2007 and with her M.S. in Structural Engineering from Ohio State in 2013. She worked as a Structural Engineer for J.D. Stevenson & Associates in Chicago, IL for 2.5 years designing structural components within nuclear power plants in the midwest. In her current role, she teaches, mentors, and advises first and second year Ohio State engineering students in their pursuit of a degree and career in engineering.Miss Meg West, The Ohio State University Meg West is a third year Civil Engineering undergraduate student at The Ohio State University. She is an Undergraduate Teaching Assistant for the Engineering

Conference Session

Curricular Issues in Computing and Information Technology Programs I

Collection

2016 ASEE Annual Conference & Exposition

Authors

Cheryl Xu, Florida State University ; Seyed Mousavinezhad, Idaho State University

Tagged Divisions

Computing & Information Technology

International Electro Information Technology Conferences. Hossein served as 2002/2003 ASEE ECE Division Chair. He was IEEE Education Society Membership Development Chair and now serves as MGA Vice President (2013/2014) and Van Valken- burg Early Career Teaching Award Chair. Dr. Mousavinezhad received Michigan State University ECE Department’s Distinguished Alumni Award, May 2009. He is recipient of ASEE ECE Division’s 2007 Meritorious Service Award, ASEE/NCS Distinguished Service Award, April 6, 2002, for significant and sustained leadership. In 1994 he received ASEE Zone II Outstanding Campus Representative Award. He is also a Senior Member of IEEE, has been a reviewer for IEEE Transactions including the Transactions on

Conference Session

Solar and Wind Energy-System Initiatives

Collection

2016 ASEE Annual Conference & Exposition

Authors

Linfeng Zhang, University of Bridgeport

Tagged Divisions

Energy Conversion and Conservation

? How do we measure the IV curve of a solar panel? Howdoes the shading affect the solar panel output? According to the lab report, it indicates that theexperiment helps the students understand the theories in the lectures; they also obtain certainskills in the testing, system design and implementation of the solar electricity; they have moreinterested in a renewable energy career. The experiment also makes the students realize that theengineers are not only familiar with solar panels but also the balance of system, such as powerelectronics.4. Conclusion The solar energy experiment is designed for the students to comprehensively understandthe energy conversion and get hands-on experience to measure, test, and set up the PV system.Some

Conference Session

College-Industry Partnerships Division Technical Session I: Students

Collection

2016 ASEE Annual Conference & Exposition

Authors

Niranjan Hemant Desai, Purdue University North Central; George Stefanek, Purdue University, North Central

Tagged Divisions

College Industry Partnerships

future employers.Question 11 in the student survey and questions 4 and 7 in the presenter survey attempt to gainfeedback from students and industry professionals to answer this question. These questions arepresented below.Question 11 from the student survey: “Was it helpful to you to meet industry professionals inperson and network with them with the intention of possibly working with them in the future?”(Y / N)Question 4 from the presenter survey: “Do you think that the proposed course would benefitindustry professionals by providing them with a recruiting / networking tool in the form of thiscourse?” (Y/N)Question 7 from the presenter survey: “In addition to the traditional approach of networkingwith students (i.e., campus career fair), do you