Collection

2011 Fall ASEE Middle Atlantic Section Conference

Authors

Paul G. Ranky

specific learning objectives.Therefore, a multi-touch, blended learning program must:• Support the learner’s ability to recall and repeatedly apply the content in their workenvironment.• Reflect and be tailored to support organizational methodologies, culture and technicalreadiness in order to assure an engaged and productive workforce.Case in Point: Blended LearningA U.S. Government agency developed an integrated approach to contracting training using acombination of web-based training, classroom instruction and practical exercises. In order toengage students across offices, generations and work groups, the agency developed a blendedlearning solution, with 35% of the program deployed through web-based learning and 65%through instructor-led

Collection

2011 Pacific Southwest Section Meeting

Authors

Amelito Enriquez; Catherine Lipe; Tom Nguyen

, African Americans and Latinos make up less than 7% of the individuals with B.S. orhigher-degree holders in STEM fields.4In 2010 in Silicon Valley, the distribution of high school graduates meeting University ofCalifornia (UC) or California State University (CSU) requirements by race/ethnicity reveals thatsome groups are less prepared to enter college upon graduation. Only 24% of Latino and AfricanAmerican graduates met UC/CSU requirements compared to 68% of Asians and 52% of Whites.5This preparation gap is reflected in the results of the Cañada College’s math placement tests overthe last four years. Only 6% of African Americans and 8% of Mexican Americans are qualifiedto begin Trigonometry or higher when they arrive at Cañada College as compared

Conference Session

The Best of Design in Engineering

Collection

2011 ASEE Annual Conference & Exposition

Authors

Andrew L. Gerhart, Lawrence Technological University; Robert W. Fletcher, Lawrence Technological University

Tagged Divisions

Design in Engineering Education

specificallyformatted with prompting questions that the student answers at the end of each class period (forthe class discussion notes) or at the completion of each project (for the project summary notes).These completed “worksheets” 1) get the first year students in the habit of documenting thematerial that they have learned, 2) allow the student to look back to previous work for reference(both during the course and in subsequent courses), and 3) allows the instructor to follow theprogress of each student when the binders are checked formally (mid-semester and end ofsemester or whenever the need may arise). In addition to obtaining/creating a binder after thefirst class period, the students write a reflection paper (with prompting questions) about a seriesof

Conference Session

Research on Engineering Design Education

Collection

2011 ASEE Annual Conference & Exposition

Authors

Ann F. McKenna, Arizona State University, Polytechnic campus; Gül E. Okudan Kremer, Pennsylvania State University, University Park; Carolyn Plumb, Montana State University; Hyun Kyoung Ro, Penn State University; Alexander Yin, Pennsylvania State University, University Park

Tagged Divisions

Educational Research and Methods

, Page 22.221.6race/ethnicity, parents’ education, class-year, disciplines, and SAT scores) and then on measures 
of six academic (classroom and curricular) and ten out-of-class student experiences that theliterature indicates are related to learning and skill development18, 19.Variables UsedThe Design Skills scale is the criterion measure for this paper. This scale contained 12 items(alpha = .92) reflecting engineering students’ reports of their self-assessed ability on design skills.Table 1 gives this scale’s item-content and descriptive statistics.Four sets of independent variables are used: sociodemographic (Table 2); classroom experiences(Table 3); curricular experiences (Table 4); and out-of-class experiences (Table 5

Conference Session

Liberal Education Revisited: Five Historical Perspectives

Collection

2011 ASEE Annual Conference & Exposition

Authors

John Heywood, Trinity College, Dublin

Tagged Divisions

Liberal Education/Engineering & Society

reflective behaviour thatis at the heart of the liberal endeavour. But they also illustrate how complex thebehaviour of groups, let alone individuals is. It is consoling, therefore, to find that manyyears after these relatively simple pieces of qualitative and quantitative (survey) research,(with the odd bit of psychometrics thrown in), and all its limitations, the researchpublished since 1990 particularly in the US persuaded Pascarella and Terenzini “morethan ever that students’ in- and out-of-class lives are interconnected in complex ways weare only beginning to understan.”[40, p 603].Notes and references[1] The description given here is simplified

Conference Session

Liberal Education Revisited: Five Historical Perspectives

Collection

2011 ASEE Annual Conference & Exposition

Authors

John Heywood, Trinity College, Dublin

Tagged Divisions

Liberal Education/Engineering & Society

Conference Session

New Faculty Development

Collection

2011 ASEE Annual Conference & Exposition

Authors

Cheryl B. Schrader, Boise State University; Seung Youn Chyung, Boise State University; William L. Hughes, Boise State University; Kotaro Sasaki, Boise State University; Teresa Cole, Boise State University, Computer Science Department; John N. Chiasson, Boise State University

Tagged Divisions

New Engineering Educators

the amount of faculty workload in, teaching and research8. Althoughvariation in faculty workload between teaching and research is healthy for ensuring qualityeducation in the classroom, as well as quality research productivity, variation in faculty rewardsdoes not reflect this variation in faculty workload8, 9, 10. When compared to the typical,quantitative reward system for research, which is based on funding and publication productivity,evaluation of teaching is difficult because of its qualitative and subjective nature and is oftenlimited to student course evaluations despite other available evaluation methods1, 4.In addition, „balancing‟ is an elusive and subjective concept. The balance between teaching andresearch can be defined and

Conference Session

Multidisciplinary Poster Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

Waddah Akili, Iowa State University

Tagged Divisions

Multidisciplinary Engineering

method atthe appropriate time. Understanding the pros and cons of the lecture method is a helpful startingpoint.Lectures have a number of characteristics that does make them, for the right subject matter,desirable in the classroom (14) .It does, to a great extent, depend on the abilities and experience ofthe lecturer. An able and committed lecturer can accomplish the following: 1. Relate the material proficiently and effectively, in a manner that reflects lecturer’s personal conviction and grasp of the subject matter; 2. Provide students with a thoughtful, scholarly role model to emulate; 3. Supplement the subject matter with current developments not yet published, or interject lecturer’s own views derived from his/her own

Conference Session

Active and Inquiry-Based Learning

Collection

2011 ASEE Annual Conference & Exposition

Authors

Muhsin Menekse, Arizona State University; Glenda Stump, Arizona State University; Stephen J. Krause, Arizona State University; Michelene T.H. Chi, Arizona State University

Tagged Divisions

Educational Research and Methods

Explain/Elaborate Question-Answer zoning out Look/Attend Justify/Reason Reciprocal teaching Underline/Highlight Connect/Integrate Argue/Challenge Gesture/Point Answer Questions Collaborate Summarize Reflect/Predict Peer tutoring Paraphrase Self-monitor/Regulate Monitor/Feedback Manipulate tape Compare

Conference Session

Professional Development from a Distance

Collection

2011 ASEE Annual Conference & Exposition

Authors

Deborah L. Helman, University of Wisconsin, Madison; Ryan J. Kershner, University of Wisconsin, Madison; Diana Wheeler, MA-LIS, University of Wisconsin, Madison; Amy L. Kindschi, University of Wisconsin, Madison; Steven M. Cramer, University of Wisconsin, Madison; Sandra Shaw Courter, University of Wisconsin, Madison; Moira Lafayette, University of Wisconsin, Madison

Tagged Divisions

Continuing Professional Development

success that resonate with faculty and instructors.These approaches help transfer knowledge, skills, and attitudes about teaching and learningamong engineering faculty.Improving Quality of Teaching and LearningA key goal of Wendt Commons’ re-organization is to improve the quality of instruction Page 22.817.13across all departments and programs. This process is expected to be continuous anddynamic, reflecting the shifting technological and pedagogical landscape, as well as the ever-evolving needs of faculty as they embrace new and innovative methods.An essential starting point was to define quality as it relates to the teaching and learningexperience

Conference Session

Engaging Students in Engineering (ENGAGE)

Collection

2011 ASEE Annual Conference & Exposition

Authors

Susan Staffin Metz, Stevens Institute of Technology; Sheryl A. Sorby, Michigan Technological University; Tricia S. Berry, University of Texas, Austin; Carolyn Conner Seepersad, University of Texas, Austin; Ana Maria Dison, University of Texas, Austin; Yosef S. Allam, The Ohio State University; John A. Merrill, Ohio State University; Wally Peters, University of South Carolina, Department of Mechanical Engineering; Erica Pfister-Altschul, University of South Carolina; Sarah C. Baxter, University of South Carolina; Guangming Zhang, University of Maryland, College Park, Department of Mechanical Engineering; James A. Leach, University of Louisville

Tagged Divisions

Women in Engineering

Isometric sketching accuracy and ability.On-Going Plans and ChallengesThe curriculum used in the ASV seminar concentrated on skills which are frequently used inCAD (e.g., isometric views, rotation, reflection, Boolean operations). A sample of civil andmechanical engineering freshmen who took a CAD course in Fall 2010 will re-take the PVST:Rin Spring 2011 to see if there has been any improvement in performance. If so, the CAD classesmay be an excellent place to integrate spatial visualization instruction into the existing content.Incoming freshmen for the 2011-12 school year will be given the same PVST:R during Summerorientation to gather additional data about student skill level.The most significant challenge faced in the USC implementation was low

Conference Session

Experiential Learning Programs and the Transition to Industry

Collection

2011 ASEE Annual Conference & Exposition

Authors

Taylor Halverson, Brigham Young University; Robert H. Todd, Brigham Young University; Christopher A. Mattson, Brigham Young University; Gregg M. Warnick, Brigham Young University

Tagged Divisions

College Industry Partnerships

Conference Session

Robot Mania!

Collection

2011 ASEE Annual Conference & Exposition

Authors

Elisabeth W. McGrath, Stevens Institute of Technology; Susan Lowes, Institute for Learning Technologies, Teachers College/Columbia University

Tagged Divisions

K-12 & Pre-College Engineering

Conference Session

NSF Grantees Poster Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

Christopher W. Swan, Tufts University; Kurt Paterson, Michigan Technological University; Olga Pierrakos, James Madison University; Angela R. Bielefeldt, University of Colorado, Boulder; Bradley A. Striebig, James Madison University

Tagged Topics

NSF Grantees

, and advocates.5.0 AcknowledgementThis material is based upon work supported by the National Science Foundation under GrantsNos. 1025207 and 1025220. Any opinions, findings, and conclusions or recommendationsexpressed in this material are those of the author(s) and do not necessarily reflect the views ofthe National Science Foundation.6.0 References 1. ABET (2008). Criteria for Accrediting Engineering Programs Effective for Evaluations During the 2009- 2010 Accreditation Cycle, 21 pp., ABET Engineering Accreditation Commission. www.abet.org 2. Aidoo, J., J. Hanson, K. Sutterer, R. Joughtalen, and S. Ahiamadi (2007). International senior design projects – more lessons learned, National Capstone Design Course Conference

Conference Session

Accreditation and Assessment in SE Programs

Collection

2011 ASEE Annual Conference & Exposition

Authors

Janet E. Burge, Miami University; Paul V. Anderson, Miami University, Ohio; Michael Carter, North Carolina State University; Gerald C. Gannod, Miami University; Mladen A. Vouk, North Carolina State University

Tagged Divisions

Software Engineering Constituent Committee

Conference Session

Thermodynamics, Fluids, and Heat Transfer I

Collection

2011 ASEE Annual Conference & Exposition

Authors

Matthew A. Carr, U.S. Naval Academy

Tagged Divisions

Mechanical Engineering

the piston. As with the Newcomen pump, the balancing ofthe pump, piston and beam caused the piston to rise due to gravity. The cycle was repeated. Thefirst two strokes were operated manually. Then trips on the plug rod to the air pump controlled thevalve sequencing. A noteworthy feature included an air pump operated by the rocking beam thatdrew non-condensable gases out of the condenser. 25 Watt’s early engines worked on steampressures similar to Newcomen’s. Pressures higher than about 7 psi above atmospheric were rarelyused. 26 This situation reflects the state of boiler strength to avoid rupture and the ability of glandseals and piston rings to minimize leakage.Watt described the performance of an engine at Wheal Butson in 1792. This engine

Conference Session

Outstanding Contributions: Mechanical Engineering Education

Collection

2011 ASEE Annual Conference & Exposition

Authors

Patrick W. Pace, University of Texas, Austin; Kristin L. Wood, University of Texas, Austin; John J. Wood, U.S. Air Force Academy; Daniel D. Jensen, U.S. Air Force Academy; Brian K Skibba, Air Force Research Laboratory

Tagged Divisions

Mechanical Engineering

Conference Session

A Systems-Thinking Approach to Solving Problems

Collection

2011 ASEE Annual Conference & Exposition

Authors

Adeel Khalid, Southern Polytechnic State University; Isaiah Waindi, SPSU Systems Engineering Graduate

Tagged Divisions

Systems Engineering

Conference Session

NSF Grantees Poster Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

David Jones, University of Nebraska, Lincoln; Carmen R. Zafft, University of Nebraska, Lincoln; John Sutton, RMC Research Corporation; Lance C. Pérez, University of Nebraska, Lincoln

Tagged Topics

NSF Grantees

commented on how they felt misinformed on what courses transferred, that thecurriculum transfer Web site at UNL didn’t appear to reflect current courses, and whetherspecific courses would transfer was not clearly stated. The STEP students indicated thataddressing this issue would improve the program. Other suggestions for improvement weresetting up a scholarship for STEP participants and also providing assistance for STEP students toline up an internship.Program Challenges Recruitment The CCs have an unresolved challenge in that it is difficult to recruit students to enter theSTEP project. It should not be surprising that the CCs have a different challenge than UNL-COE, although it manifests itself a bit differently. Neither UNL-STEP

Conference Session

Innovative Program and Curricular Development

Collection

2011 ASEE Annual Conference & Exposition

Authors

Felicia Chong, Michigan Technological University; Douglas E. Oppliger, Michigan Technological University; Jean Kampe, Michigan Technological University; Valorie Troesch, Michigan Technological University

Tagged Divisions

K-12 & Pre-College Engineering

+ or - .05) for eight items. Two of the positive items were statistically significant pre-to-post: “Create design posters using technology” and “Program w/computer software.” End School Year Student QuestionnaireStudents were also asked to complete a survey at the end of their spring Expo experiences. Theywere asked to reflect on their experiences over the previous year. Here are a few of thehighlights:I. Career Intentions:At the end of their first year in HSE, 70% (32 of 46 surveyed) of Cadre I and 61% (34 of 56surveyed) of Cadre II students indicated that they are considering STEM careers. Longitudinaldata will continue to be collected for these students so we can learn if attitudes about careerintentions in STEM are

Conference Session

Knowing Ourselves: Research on Engineering Education Researchers

Collection

2011 ASEE Annual Conference & Exposition

Authors

Xin (Cindy) Chen, Purdue University; Nikitha Sambamurthy, Purdue University; Corey M. Schimpf, Purdue University, West Lafayette; Hanjun Xian, Purdue University, West Lafayette; Krishna Madhavan, Purdue University, West Lafayette

Tagged Divisions

Educational Research and Methods

organization evolving within Del.icio.us (http://del.icio.us, referred to as“Delicious”, also http://www.delicious.com) and Flickr (http://www.flickr.com)20. It is aconflation of “folk” and “taxonomy.” Nowadays, folksonomy generally represents theassemblage of tags generated through tagging6,10,21. This paper is primarily concerned with thefolksonomy generated from weighted tagging, as tags themselves combined with the assignedweight and confidence will reflect core concepts. Additionally changes and patterns in thefolksonomy will reveal trends in engineering education research.In addition to the property discussed above, many other properties of folksonomies have beenuncovered. An important finding is that as more users tag a resource, these tags

Conference Session

ECE Division Poster Session

Collection

2011 ASEE Annual Conference & Exposition

Authors

Kevin P. Pintong, Binghamton University; Douglas H. Summerville, Binghamton University

Tagged Divisions

Electrical and Computer

, nodal analysis, KCL, KVL. This module incorporates all modules leading up to this and could possibly represent a final exam. 6. Summer 2011 Proposed Course Design6.1 Overall Course design goalsA metastudy by the Department of Education yielded the result that promoting students’reflections of their level of understanding is more effective than online learning that does notprovide trigger for reflection. 13 The design of the summer 2011 tries to incorporate thisphilosophy wherever possible. Feedback and prior research from faculty, staff and students fromBinghamton University’s ECE department and other institutions will be used. It is our goal tointegrate all these different ideas and concepts in a very clear and concise manner

Conference Session

Innovative Instructional Strategies and Curricula in ECE I

Collection

2011 ASEE Annual Conference & Exposition

Authors

MaryPat Beaufait; Duyun Chen, University of Pennsylvania; Carl B Dietrich P.E., Virginia Tech; Cecile Dietrich; Garrett Michael Vanhoy, University of Arizona

Tagged Divisions

Electrical and Computer

material are thoseof the author(s) and do not necessarily reflect the views of the National Science Foundation.References 1. J. Mitola; G. Maguire; ―Cognitive radio: Making software radios more personal,‖ IEEE Personal Communications, Aug. 1999. 2. S. Haykin; Cognitive radio: Brain-empowered wireless communications,‖ IEEE Journal in Selected Areas in Communications, vol. 23, pp. 1-20. 2005. 3. E. Seymour; A. Hunter; S Laursen; T. Deantoni; ―Establishing the benefits of research experiences for Page 22.1548.17 undergraduates in the sciences: First findings from a three year study.‖ Science Education, vol. 88

Conference Session

Methods, Techniques, and New Programs in Graduate Education

Collection

2011 ASEE Annual Conference & Exposition

Authors

Michele L. Strutz, Purdue University, West Lafayette; James Edwin Cawthorne Jr., Purdue University, West Lafayette; Daniel Michael Ferguson, Purdue University, West Lafayette; Mark T. Carnes, Purdue University, West Lafayette; Matthew W. Ohland, Purdue University, West Lafayette

Tagged Divisions

Graduate Studies

I would be smart enough to do that, or, I would have enough expertise to do that. One of the big things that I got out of my experiences [at my University] is understanding the importance of reflection, and understanding, thinking back over my life, and about choices I‟ve made, and what‟s meaningful, and what I learned. − EmmaAlex adds to Emma's comments what he learned from the PhD experience: The appreciation for what makes good research. So it took me a while to realize that, you didn‟t just have to find a reference, you really had to find all the references. And you had to look at all the work that‟s been done not just here‟s something somebody did, I‟m building on it. End of story

Conference Session

Integrating Technical Research into Professional Development and K-12 Classrooms

Collection

2011 ASEE Annual Conference & Exposition

Authors

John D. Carpinelli, New Jersey Institute of Technology; Howard S. Kimmel, New Jersey Institute of Technology; Linda S. Hirsch, New Jersey Institute of Technology; Levelle Burr-Alexander, New Jersey Institute of Technology; Kwabena A. Narh, New Jersey Institute of Technology; Rajesh N. Davé, New Jersey Institute of Technology

Tagged Divisions

K-12 & Pre-College Engineering

and statistics. We plan on expanding this component of the professionaldevelopment and develop a guide for the teachers in this area. For the research experience partof the program, teachers have indicators that they would like to have more group meetings of theresearchers and the RET teachers to discuss the research being conducted. We will work withthe research mentors to have more such meetings.AcknowledgmentThis project was supported by the National Science Foundation under Grant No. 0908889. Anyopinions, findings, and conclusions or recommendations expressed in this material are those ofthe author(s) and do not necessarily reflect the views of the National Science Foundation

Conference Session

Innovative Program and Curricular Development

Collection

2011 ASEE Annual Conference & Exposition

Authors

Liesl Hotaling, University of South Florida, St. Petersburg; Rustam Stolkin, University of Birmingham, UK; Susan Lowes, Columbia University, Institute for Learning Technologies, Teachers College; James S. Bonner, Clarkson University; William David Kirkey, Clarkson University; Temitope Ojo, Clarkson University; Peiyi Lin, Columbia University, Teachers College

Tagged Divisions

K-12 & Pre-College Engineering

opportunities presented in SENSE ITincorporate problems reflecting societal need and align to technology and science contentstandards.Design-based activities, such as those included in the SENSE IT project, provide a rich contextfor learning and lend themselves to sustained inquiry and revision. SENSE IT helps students andteachers develop the deep understanding needed to apply knowledge in the complex domains ofreal world practice. Children learn best if they are immersed in complex experiences and aregiven the opportunity to actively process what they have learned [2]. Our Other Youth [3], reportsthat the majority students learn best when instruction emphasizes application. Yet only 16percent of instruction in U.S. classrooms could be characterized as

Conference Session

Rethinking PowerPoint and Other Acts of Communication

Collection

2011 ASEE Annual Conference & Exposition

Authors

Laura R. Grossenbacher, University of Wisconsin, Madison; Christina Matta, University of Wisconsin, Madison, Technical Communication Program

Tagged Divisions

Liberal Education/Engineering & Society

logical structure orprogression to the sections. Vague or poorly ordered section headings can obscure thedocument’s narrative or mislead the reader about the content of the paper, thus weakening theoverall argument.With this in mind, the Macro-organization quiz includes a question that presents students with asample Table of Contents for a feasibility analysis, then asks them to decide the best location inthe document for the actual analysis (Figure 4). The answers are more than just a list of possiblelocations, however; instead, they propose different locations and a reason for suggesting thatlocation. These reasons reflect some of the common thought processes we have seen as wediscuss drafts with our students; often, creating a logical scaffold

Conference Session

Innovative Program and Curricular Development

Collection

2011 ASEE Annual Conference & Exposition

Authors

Catherine Frances Ibes, Saint Catherine University; Yvonne Ng, St. Catherine University

Tagged Divisions

K-12 & Pre-College Engineering

haunchesTransferable Educational Element: This activity is a culmination of a number of differentconcepts. While this lesson clearly reflects a ‘led discussion’ rather than a free designexperience, it allows the student to see how the whole design process brought to bear on aparticular problem for which a brilliant solution was devised. It also models more sophisticatedengineering practices where engineers have a good idea of what will work before they actuallybuild

Conference Session

FPD I: Attacking the Problems of Retention in the First Year

Collection

2011 ASEE Annual Conference & Exposition

Authors

Alan D. Niemi, LeTourneau University; Robert W. Warke, LeTourneau University

Tagged Divisions

First-Year Programs

retention rates from 1998 through 2007 are shown in Figure 2. The one-yearretention rate graph reveals no overall improvement. It should be noted that the 2007 cohortshows about the same retention as the 2002 cohort (the final year of the graduation rate study inwhich the graduation rate was 33%). The two-year retention rate is also relatively flat from 1998through 2005 at about 50%. The 2006 cohort however, shows a significant increase to 68%. Itwill be interesting to see if this is reflected in future graduation rates. 90% 80% 70% 60% 50% 40% 30% 1-year retention

Conference Session

Ethics in different disciplines

Collection

2011 ASEE Annual Conference & Exposition

Authors

Marilyn A. Dyrud, Oregon Institute of Technology

Tagged Divisions

Engineering Ethics

, “students are forced to reflect . . . on the environment of decision making.”4 Doing soallows students to exercise critical thinking and ethical decision-making abilities. Because smallcases are so limited, instructors can spend more time focusing on these skill sets, as well asethical problem identification and moral deliberation.Finally, a consideration of our students’ career paths indicates that small cases may be morerelevant. Engineers, of course, have been involved in high-profile cases, but chances are that our Page 22.710.2students will probably face ethical challenges of the more mundane, garden variety. Furthermore,engineering ethicist