Conference Session

NSF Grantees’ Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Weizhao Zhao, University of Miami

Tagged Topics

NSF Grantees Poster Session

Paper ID #12325TUES Type 2 Project: Development and Application of MITS/DATS Course-ware: Advancement, Success, Concern, and WeaknessDr. Weizhao Zhao, University of Miami Professor of Biomedical Engineering Director of Medical Physics Graduate Program Dept. of Biomedical Engineering Coral Gables, FL 33146, USA Page 26.1609.1 c American Society for Engineering Education, 2015 TUES Type 2 Project: Development and Application of MITS/DATS Courseware: Advancement, Success, Concern, and

Conference Session

Mechanics of Materials

Collection

2015 ASEE Annual Conference & Exposition

Authors

William E. Howard, East Carolina University; Rick Williams, Auburn University; Sarah Christine Gurganus, NAVAIR Fleet Readiness Center East

Tagged Divisions

Mechanics

Paper ID #12176Using Additive Manufacturing and Finite Element Analysis in a Design-Analyze-Build-Test ProjectDr. William E Howard, East Carolina University William E (Ed) Howard is an Associate Professor in the Department of Engineering at East Carolina University. He was previously a faculty member at Milwaukee School of Engineering, following a 14- year career as a design and project engineer with Thiokol Corporation, Spaulding Composites Company, and Sta-Rite Industries.Dr. Rick Williams, Auburn University Rick Williams is currently a Visiting Associate Professor at Auburn University. His research interests include

Conference Session

Dynamic Systems and Control

Collection

2015 ASEE Annual Conference & Exposition

Authors

Estelle M. Eke, California State University, Sacramento

Tagged Divisions

Mechanical Engineering

Paper ID #11981Using Simulink, Matlab, and LEGO Mindstorms to teach a Project-BasedControl Systems Design CourseDr. Estelle M Eke, California State University, Sacramento Estelle Eke is a full professor of Mechanical Engineering at California State University, Sacramento. She received a B.S. degree in Aeronautical and Astronautical Engineering from Purdue University, a M.S. in Mechanical Engineering and Materials Science from Rice University, and a Ph.D. in Aeronautical and Astronautical Engineering from Rice University. She worked for two and half years in the Spacecraft Navigation Section at the Jet Propulsion Laboratory

Conference Session

Design as a Social Process: Teams and Organizations

Collection

2015 ASEE Annual Conference & Exposition

Authors

R. Keith Stanfill, University of Florida; Shari Ann Robinson, University of Florida Counseling and Wellness center

Tagged Divisions

Design in Engineering Education

Paper ID #13763Preparing Capstone Design Instructors and Project Mentors to Deal with Dif-ficult Students and Problem TeamsDr. R. Keith Stanfill, University of Florida Keith Stanfill holds the academic rank of Engineer and serves as the Director of the Integrated Product and Process Design (IPPD) Program for the University of Florida (UF) College of Engineering. He received his B.S., M.E., and Ph.D. degrees in mechanical engineering from UF in 1985, 1991 and 1995, respectively. He joined the UF Industrial and Systems Engineering faculty in 1999 as the IPPD Associate Director and was promoted to IPPD Director in 2001

Conference Session

Evaluation: Exploring the Impact of Programs for K-12 Teachers.

Collection

2015 ASEE Annual Conference & Exposition

Authors

Laura E. LeMire, The Community College of Baltimore County

Tagged Topics

Diversity

Tagged Divisions

K-12 & Pre-College Engineering

Paper ID #12524Professional Development Training That Makes Project Lead The Way Teach-ers More Knowledgeable and Confident Instructors (Evaluation)Ms. Laura E. LeMire, The Community College of Baltimore County Upon graduation from the University of Maryland, College Park with her masters in geotechnical en- gineering, Laura went to work for Baltimore Gas and Electric where during her career there she was responsible for substation and transmission line construction projects, relocation and installation of BGE facilities for Oriole Park at Camden Yards and for the Light Rail, and for improving service reliability. After

Conference Session

Eco-Car Poster Session

Collection

2015 ASEE Annual Conference & Exposition

Authors

Shawn Midlam-Mohler,, Ohio State University ; Jason Linger, Ohio State University ; Jack Slavinski, Ohio State University ; Lisa Fiorentini, Ohio State University

Tagged Topics

Eco-Car Poster Session

Paper ID #14368Project Management Inside and Outside of the Curriculum at the Ohio StateUniversityShawn Midlam-Mohler,, Ohio State UniversityJason Linger, Ohio State University Jason Linger is the Project Manager for The Ohio State University EcoCAR 3 Team. He graduated from Ohio State in May 2015 with a Bachelor of Science in Industrial and Systems Engineering. A native of Westlake, Ohio, Jason has completed internships at Ford Motor Company and the Cleveland Clinic. At Ford, he worked on the launch of the 2016 F-650 and F-750 at the Ohio Assembly Plant. In addition to his work on EcoCAR at Ohio State, Jason served as a rock

Conference Session

Problem- Project- and Case-based Learning in Environmental Engineering

Collection

2015 ASEE Annual Conference & Exposition

Authors

Phil Dacunto P.E., United States Military Academy; Victoria Rose Varriano, United States Military Academy; Jason Ko, United States Military Academy

Tagged Divisions

Environmental Engineering

lieutenant in the United States Army.Jason Ko, United States Military Academy West Point Cadet, Class of 2015. Civil Engineering Major Branch: Army Corps of Engineers Page 26.1268.1 c American Society for Engineering Education, 2015 Project-Based Learning in the Developing World: Design of a Modular Water Collection and Treatment SystemAbstract Project-based learning can be particularly effective in the field of engineering, in thatstudents can apply what they have learned in the classroom to create a tangible product. Suchexperiences are especially engaging for students

Conference Session

Industrial Engineering Division Technical Session 3

Collection

2015 ASEE Annual Conference & Exposition

Authors

Max de Jesús Suárez Montiel, Tecnológico de Monterrey, Mexico; Alberto Abelardo Hernandez-Luna, Tecnológico de Monterrey

Tagged Topics

Diversity

Tagged Divisions

Industrial Engineering

Paper ID #13877Recognition of Projects for Service Organizations based on Customer Ex-pected and Perceived Quality, and Customer Experience ´ Su´arez Montiel, Tecnol´ogico de Monterrey, MexicoMr. Max de Jesus Born: Hidalgo, M´exico BS: Mechanical Engineer, Universidad Auton´oma de Nuevo Le´on MS: Master of Science of Manufacturing Systems, Student of Master Degree, Tecnol´ogico de Monterrey Tecnol´ogico de Monterrey (ITESM) max.itesm@gmail.comDr. ALBERTO ABELARDO HERNANDEZ-LUNA, Tecnol´ogico de Monterrey Born: Monterrey, M´exico. BS: Mechanical Electrical Engineering, Tecnol´ogico de Monterrey MS: Me- chanical

Conference Session

Self-efficacy and Emotion: ERM Roundtable

Collection

2015 ASEE Annual Conference & Exposition

Authors

Laura Hirshfield, University of Michigan; Debbie Chachra, Olin College of Engineering; Cynthia J. Finelli, University of Michigan; Jeremy M. Goodman, Franklin W. Olin College of Engineering

Tagged Topics

Diversity

Tagged Divisions

Educational Research and Methods

Paper ID #12102Relating project tasks in design courses to the development of engineeringself-efficacyDr. Laura Hirshfield, University of Michigan Laura Hirshfield is a postdoctoral researcher at the University of Michigan in the Center for Research on Learning and Teaching in Engineering (CRLT-e). She received her B.S. from the University of Michi- gan and her Ph.D. from Purdue University, both in chemical engineering. She then transitioned into the engineering education field by completing a post-doctoral appointment at Oregon State University in- vestigating technology-aided conceptual learning. She is currently doing

Conference Session

Curriculum Exchange

Collection

2015 ASEE Annual Conference & Exposition

Authors

David Mitchell, California Polytechnic State University, San Luis Obispo; John M. Keller, California Polytechnic State University; Victor M Castillo Jr, California Polytechnic State University

Tagged Divisions

K-12 & Pre-College Engineering

Paper ID #11918Saving Rivertown: Using Computer Simulations in an Earth Science Engi-neering Design Project for Pre-Service TeachersDr. David Mitchell, California Polytechnic State University, San Luis Obispo David Mitchell is an Associate Professor in the Physics department, and an affiliated faculty in the Liberal Studies department, at Cal Poly, San Luis Obispo. Originally from the Seattle area, Dr. Mitchell is an astronomer working on the detection of extrasolar planets orbiting giant stars. He teaches introductory and advances astronomy courses, when not preparing future elementary teachers.Dr. John M. Keller

Conference Session

Industrial Engineering Division Technical Session 1

Collection

2015 ASEE Annual Conference & Exposition

Authors

Jessica L. Heier Stamm, Kansas State University; Reuben F. Burch V, Kansas State University; Hugh R. Medal, Mississippi State University

Tagged Divisions

Industrial Engineering

Paper ID #13676Students’ Experiences with an Open-ended Client Project in a Graduate CourseDr. Jessica L. Heier Stamm, Kansas State University Jessica L. Heier Stamm is an Assistant Professor in the Department of Industrial and Manufacturing Sys- tems Engineering at Kansas State University. She holds a B.S. in industrial engineering from Kansas State University and a Ph.D. in industrial and manufacturing systems engineering from the Georgia Insti- tute of Technology. Her research interests include the development of quantitative models and algorithms to design and improve humanitarian relief and public health logistics

Conference Session

Measuring the Impact of Community Engagement on Students

Collection

2015 ASEE Annual Conference & Exposition

Authors

Keilah Maria Tablante Bias, University of Prince Edward Island; Daniel Larsen, University of Prince Edward Island; Libby Osgood P. Eng, UPEI & Dalhousie University; Alex Gamble, University of Prince Edward Island; Spencer Paul Montgomery, University of New Brunswick

Tagged Divisions

Community Engagement Division

, tutor, and did several volunteer teaching jobs in the past, and one of her career goals is to become an educator, in addition to becoming a professional engineer.Mr. Daniel Larsen, University of Prince Edward Island Daniel Larsen is a third year engineering student at the University of New Brunswick. He transferred to the University of New Brunswick after completing a two years engineering diploma, in his home province, at the University of Prince Edward Island (UPEI). While at the UPEI, as part of a group design project, Daniel worked with the Mikinduri Children of Hope Foundation, and coordinated the design of a new charcoal press.Libby Osgood P. Eng, UPEI & Dalhousie University Libby Osgood is an Assistant

Conference Session

Software and Programming

Collection

2015 ASEE Annual Conference & Exposition

Authors

Debra J. Mascaro, University of Utah; Stephen Mascaro, University of Utah

Tagged Divisions

Computers in Education

Paper ID #13868An Integrated Project-Driven Course in Computer Programming for Me-chanical Engineering StudentsProf. Debra J Mascaro, University of Utah Debra J. Mascaro is the Director of Undergraduate Studies in Mechanical Engineering at the University of Utah. She holds a B.A. in Physics from Gustavus Adolphus College in St. Peter, MN, and a Ph.D. in Materials Science and Engineering from the Massachusetts Institute of Technology. She primarily teaches freshman design and programming courses.Prof. Stephen Mascaro, University of Utah Stephen Mascaro received the B.A. in Physics from Houghton College, the B.S. in Mechanical

Conference Session

Novel Teaching Methods in a Multidisciplinary Context

Collection

2015 ASEE Annual Conference & Exposition

Authors

Jennifer R. Amos, University of Illinois, Urbana-Champaign; Troy J. Vogel, University of Illinois, Urbana-Champaign; Princess Imoukhuede, University of Illinois, Urbana-Champaign

Tagged Divisions

Multidisciplinary Engineering

Paper ID #12724Assessing teaming skills and major identity through collaborative sophomoredesign projects across disciplines.Dr. Jennifer R Amos, University of Illinois, Urbana-Champaign Dr Amos joined the Bioengineering Department at the University of Illinois in 2009 and is currently a Sr Lecturer and Director of Undergraduate programs. She received her B.S. in Chemical Engineering at Texas Tech and Ph.D. in Chemical Engineering from University of South Carolina. She has developed and offered more than 5 courses since joining the faculty and has taken the lead roll in curriculum development for the department.Dr. Troy J

Conference Session

International Division Technical Session 1

Collection

2015 ASEE Annual Conference & Exposition

Authors

Ang Liu, Univ of Southern California; Yun Dai; James R. Morrison, KAIST, ISysE; Stephen Y. Lu, University of Southern California

Tagged Topics

Diversity

Tagged Divisions

International

Paper ID #12566Comparison of team effectiveness between globally distributed and locallydistributed engineering project teamsDr. Ang Liu, Univ of Southern California Dr. Ang Liu is a visiting assistant professor in the Aerospace and Mechanical Engineering department, at the University of Southern California.Miss Yun Dai Yun Dai is a doctoral student from Gevirtz School of Education, University of California Santa Barbara, with an emphasis in learning, culture and technology. Her research interest revolve around teaching and learning, ethnographic research, engineering education and comparative education. She recently focuses

Conference Session

Best Practices and Lessons Learned in Capstone Design Projects

Collection

2015 ASEE Annual Conference & Exposition

Authors

Wesley B. Williams P.E., University of North Carolina, Charlotte; Eric J. Schaus, Georgia Institute of Technology

Tagged Divisions

Manufacturing

design-build-test approach throughout their project and were drawn to additivemanufacturing (or rapid prototyping) to help them to reduce the cycle time on each iteration ofthe design-build-test process. Two different technologies, fused deposition modeling (FDM) andfilm transfer imaging (FTI), were used to additively manufacture these parts, using a StratasysDimension and 3D Systems VFlash respectively. These technologies provided some significantadvantages in producing complex parts for the robot, but it did come with some limitations aswell. Several students started the project with the mainstream notion that additive manufacturingallowed effortless printing of any part you desired from a CAD file. Through both successes andfailures, they

Conference Session

Problem- Project- and Case-based Learning in Environmental Engineering

Collection

2015 ASEE Annual Conference & Exposition

Authors

Paula Ann Monaco, Texas Tech University; Maeghan Marie Brundrett, Texas Tech University; Dylan Christenson, Texas Tech University; Kevin A. Nguyen, Texas Tech University; Audra N. Morse, Texas Tech University

Tagged Topics

Diversity

Tagged Divisions

Environmental Engineering

performing well following theimplementation of the WEAT design prompt.IntroductionCapstone design courses vary between engineering programs and can be structured to includeindustry partners, service-learning projects for communities or competition design projects1.Utilization of a competition prompt as the capstone design project provides many benefits forstudent education2. For instance, students may receive a real-world problem submitted by aregional municipal utility tasking them with the job of treatment upgrades to improve plantperformance. Unlike the use of hypothetical academic prompts, additional opportunities aregiven to the students when they engage with a competition prompt, such as the ability to tour theproject facility, receive

Conference Session

Best Practices and Lessons Learned in Capstone Design Projects

Collection

2015 ASEE Annual Conference & Exposition

Authors

Zhenhua Wu, Virginia State University; Nasser Ghariban, Virginia State University

Tagged Divisions

Manufacturing

Paper ID #12426PLM Based Digital Design Manufacturing and Process Monitoring of an Im-peller Manufacturing- a Senior Project at Virginia State UniversityDr. Zhenhua Wu, Virginia State University Dr. Zhenhua Wu, is currently an Assistant Professor at Virginia State University. He received his PhD in Mechanical Engineering from Texas A&M University. His current research interests focus on control and diagnose complex systems, sustainable manufacturing, adaptive machining, and nano manufacturing.Dr. Nasser Ghariban, Virginia State University

Conference Session

Problem- Project- and Case-based Learning in Environmental Engineering

Collection

2015 ASEE Annual Conference & Exposition

Authors

Jennifer Mueller PE P.E., Rose-Hulman Institute of Technology

Tagged Divisions

Environmental Engineering

treatment wetland system, we collected a stormwater sample from campus andpumped it through the wetland. Water samples were then collected at the outlet of each subbasinto investigate removal of nutrients, suspended solids, and organic material at each stage throughthe wetland system. Beyond the initial construction and testing, the main goal of having afunctioning wetland system is to utilize the treatment wetland for laboratory experiments inRHIT’s Environmental Engineering Lab course, as well as for future student research projects andpotential demonstrations in other courses at RHIT. This will provide students with an activelearning experience by performing tests of treatment capabilities on a real constructed wetland.IntroductionNatural

Conference Session

Problem- Project- and Case-based Learning in Environmental Engineering

Collection

2015 ASEE Annual Conference & Exposition

Authors

Maeghan Marie Brundrett, Texas Tech University; Dylan Christenson, Texas Tech University; Paula Ann Monaco, Texas Tech University; Kevin A. Nguyen, Texas Tech University; Audra N. Morse, Texas Tech University

Tagged Divisions

Environmental Engineering

all” traditional lab setup is unlike real world scenarios and in the end,students learn to mimic experimental setups but the connection to theory and practice is lost. Ithas been suggested that relevant, real-world applications can promote student motivation,engagement, and comprehension1. Another study demonstrated that students are more likely tochoose engineering and stick with their choice if provided real world, authentic learningexperiences2. One suggestion to overcome the limits of traditional labs is to use field studies as apractical project-based learning that connects theory to practice.Project based learning has been stated to be the “application of knowledge” with tasks that aremore realistic and comparable to what practicing

Conference Session

First-year Programs Division Technical Session 8: Project-based Learning and Cornerstone Courses

Collection

2015 ASEE Annual Conference & Exposition

Authors

James A Middleton, Arizona State University; Stephen J Krause, Arizona State University; Kendra Rae Beeley; Eugene Judson, Arizona State University; John Ernzen; Ying-Chih Chen, Arizona State University

Tagged Divisions

First-Year Programs

learning environments in Science, Engineering and Mathematics. He has also written on effective uses of educa- tional technology in mathematics and science education as a natural outgrowth of these interests. To fund his research, Jim has garnered over $20 million in grants to study and improve mathematics education in urban schools. He just finished a $1.8 million research grant to model the longitudinal development of fractions, rational number and proportional reasoning knowledge and skills in middle school students, and is currently engaged in a project studying the sustainability of changes in urban elementary teachers’ mathematics practices. All of his work has been conducted in collaborative partnerships with

Conference Session

First-year Programs Division Technical Session 6: Hands-on Projects and Spatial Skills

Collection

2015 ASEE Annual Conference & Exposition

Authors

Benjamin Emery Mertz, Arizona State University; Haolin Zhu, Arizona State University; Chao Wang, Arizona State University

Tagged Divisions

First-Year Programs

Engineering from University of Wisconsin, Madison. She is currently a lecturer in Ira. A Fulton Schools of Engineering at Arizona State University. Page 26.472.1 c American Society for Engineering Education, 2015 Design, Implementation and Evaluation of an Online Team and Activity-Based Introduction to Engineering CourseAbstractAs the popularity of online education in engineering increases, project- and team-based classestaught in classrooms must be converted into equivalent online versions. In order to maintainequivalency, content and ABET outcomes must be considered. This is

Conference Session

First-year Programs Division Technical Session 8: Project-based Learning and Cornerstone Courses

Collection

2015 ASEE Annual Conference & Exposition

Authors

Kyle G. Gipson, James Madison University; Justin J Henriques; Sancho Sequeira

Tagged Divisions

First-Year Programs

engineering education. He was trained as a Manufacturing Process Specialist within the textile industry, which was part of an eleven- year career that spanned textile manufacturing to product development.Dr. Justin J HenriquesMr. Sancho Sequeira Page 26.509.1 c American Society for Engineering Education, 2015Work in progress: Development and Implementation of a Cornerstone Course: Engineering Opportunities    Abstract    In response to the vision presented in the Engineer of 2020 Project, many engineeringeducators are redesigning courses

Conference Session

First-year Programs Division Technical Session 8: Project-based Learning and Cornerstone Courses

Collection

2015 ASEE Annual Conference & Exposition

Authors

James M Widmann, California Polytechnic State University; Brian P. Self, California Polytechnic State University; Peter Schuster, California Polytechnic State University

Tagged Topics

Diversity

Tagged Divisions

First-Year Programs

courses, inquiry-based learning in mechanics, and design projects to help promote adapted physical activities. Other professional interests include aviation physiology and biomechanics.Dr. Peter Schuster, California Polytechnic State University Dr. Peter Schuster is a professor in the mechanical engineering department at Cal Poly, focusing on design and stress analysis. He has a B.S. in Physics and an M.S. & Ph.D. in Mechanical Engineering. After working ten years in the automotive industry, Peter thoroughly enjoys teaching undergraduates. He is interested in biomechanics, using design to improve quality of life, and diversity in engineering

Conference Session

Reporting Out: Dissemination of Several NSF Projects of Interest to Two-Year Colleges

Collection

2015 ASEE Annual Conference & Exposition

Authors

Dan G. Dimitriu, San Antonio College; Jerry O'Connor, San Antonio College

Tagged Divisions

Two Year College Division

history this project has beensupported by grants from our local college Foundation, the National Science Foundation, and theDepartment of Education.After sustained efforts to create a stable program based on the original concept did not providethe desired results, a comprehensive examination and redesign of the program was conducted for2013. The new version has been developed as a two year program. The first year would preparestudents for College Algebra by boosting their Math proficiency and helping them acquire astrong college student identity. The second year would introduce them to college levelEngineering.The new edition of the program was offered for the first time in 2013 with only the first yearcomponent. In 2014 we offered both

Conference Session

Reporting Out: Dissemination of Several NSF Projects of Interest to Two-Year Colleges

Collection

2015 ASEE Annual Conference & Exposition

Authors

John Wadach, Monroe Community College

Tagged Topics

Diversity

Tagged Divisions

Two Year College Division

Paper ID #11784Infusing a Concurrent Engineering Model into AcademiaProf. John Wadach, Monroe Community College John Wadach is a professor and department chair of the Engineering Science and Physics Department at Monroe Community College in Rochester, NY. He has taught a variety of physics and engineering courses in his 30 year career. Wadach is most inspired by the use of design-build projects in his engineering courses. Infusing a Concurrent Engineering Model into Academia is the title of the NSF TUES grant that he and co-PIs George Fazekas and Paul Brennan were awarded $200,000. Wadach has been the co-organizer of

Conference Session

First-year Programs Division Technical Session 6: Hands-on Projects and Spatial Skills

Collection

2015 ASEE Annual Conference & Exposition

Authors

Jennifer Ocif Love, Northeastern University; Susan F Freeman, Northeastern University; Kris Jaeger-Helton, Northeastern University; Richard Whalen, Northeastern University

Tagged Divisions

First-Year Programs

active member of Northeastern’s Gateway Team, a select group of teaching faculty expressly devoted to the first-year Engineering Program at NU. She also serves as a Technical Faculty Advisor for Senior Capstone Design and graduate-level Challenge Projects in Northeastern’s Gordon Engineering Leadership Program. Dr. Jaeger has been the recipient of numerous awards in engineering education for both teaching and mentoring and has been involved in several engineering educational research initiatives through ASEE and beyond.Dr. Richard Whalen, Northeastern University Dr. Richard Whalen is a Teaching Professor at Northeastern University in Boston, MA and a core member of the Engineering Gateway Team. The focus of this team

Conference Session

Reporting Out: Dissemination of Several NSF Projects of Interest to Two-Year Colleges

Collection

2015 ASEE Annual Conference & Exposition

Authors

Lea K. Marlor, University of California, Berkeley; Sharnnia Artis, University of California, Berkeley; Catherine T. Amelink, Virginia Tech

Tagged Topics

Diversity

Tagged Divisions

Two Year College Division

postdoctoral fellowship at The Ohio State University. She has a B.S., M.S., and Ph.D. in Industrial and Systems Engineering from Virginia Tech.Dr. Catherine T. Amelink, Virginia Tech Dr. Catherine Amelink serves as the external evaluator for the TTE REU program. She has over 15 years of experience in assessment and evaluation of educational programs, project outcomes, and grant teams. Page 26.1546.1 c American Society for Engineering Education, 2015 The Impact of Summer Research Experiences on Community College Students’ Pursuit of an Advanced Degree in Science and

Conference Session

First-year Programs Division Technical Session 6: Hands-on Projects and Spatial Skills

Collection

2015 ASEE Annual Conference & Exposition

Authors

Sarah Jane Grigg, Clemson University; Lisa Benson, Clemson University

Tagged Divisions

First-Year Programs

appointment in Bioengineering. Her research focuses on the interactions between student moti- vation and their learning experiences. Her projects involve the study of student perceptions, beliefs and attitudes towards becoming engineers and scientists, and their problem solving processes. Other projects in the Benson group include effects of student-centered active learning, self-regulated learning, and incor- porating engineering into secondary science and mathematics classrooms. Her education includes a B.S. in Bioengineering from the University of Vermont, and M.S. and Ph.D. in Bioengineering from Clemson University

Conference Session

First-year Programs Division Technical Session 6: Hands-on Projects and Spatial Skills

Collection

2015 ASEE Annual Conference & Exposition

Authors

Diana Bairaktarova, University of Oklahoma; Matthew Reyes, University of Oklahoma; Nooshin Nassr P.E., University of Oklahoma; Dan Thomas Carlton, University of Oklahoma, College of Aerospace and Mechanical Engineering

Tagged Topics

Diversity

Tagged Divisions

First-Year Programs